/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright (c) 2014-2019 Broadcom Limited
+ * Copyright (c) 2014-2019 Broadcom Inc.
* All rights reserved.
*
* DO NOT MODIFY!!! This file is automatically generated.
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
#define HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD UINT32_C(0x4321)
#define HWRM_SHORT_INPUT_SIGNATURE_LAST \
HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD
- /* Reserved for future use. */
- uint16_t unused_0;
+ /* The target ID of the command */
+ uint16_t target_id;
+ /* Default target_id (0x0) to maintain compatibility with old driver */
+ #define HWRM_SHORT_INPUT_TARGET_ID_DEFAULT UINT32_C(0x0)
+ /* Reserved for user-space HWRM interface */
+ #define HWRM_SHORT_INPUT_TARGET_ID_TOOLS UINT32_C(0xfffd)
+ #define HWRM_SHORT_INPUT_TARGET_ID_LAST \
+ HWRM_SHORT_INPUT_TARGET_ID_TOOLS
/* This value indicates the length of the request. */
uint16_t size;
/*
#define HWRM_FWD_RESP UINT32_C(0xd2)
#define HWRM_FWD_ASYNC_EVENT_CMPL UINT32_C(0xd3)
#define HWRM_OEM_CMD UINT32_C(0xd4)
+ /* Tells the fw to run PRBS test on a given port and lane. */
+ #define HWRM_PORT_PRBS_TEST UINT32_C(0xd5)
#define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0)
#define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0)
#define HWRM_WOL_FILTER_FREE UINT32_C(0xf1)
#define HWRM_CFA_EEM_OP UINT32_C(0x123)
/* Experimental */
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124)
+ /* Experimental */
+ #define HWRM_CFA_TFLIB UINT32_C(0x125)
/* Engine CKV - Ping the device and SRT firmware to get the public key. */
#define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d)
/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
#define HWRM_ENGINE_CKV_KEY_GEN UINT32_C(0x135)
/* Engine CKV - Configure a label index with a label value. */
#define HWRM_ENGINE_CKV_KEY_LABEL_CFG UINT32_C(0x136)
+ /* Engine CKV - Query a label */
+ #define HWRM_ENGINE_CKV_KEY_LABEL_QCFG UINT32_C(0x137)
/* Engine - Query the available queue groups configuration. */
#define HWRM_ENGINE_QG_CONFIG_QUERY UINT32_C(0x13c)
/* Engine - Query the queue groups assigned to a function. */
/* Experimental */
#define HWRM_PCIE_QSTATS UINT32_C(0x204)
/* Experimental */
+ #define HWRM_MFG_FRU_WRITE_CONTROL UINT32_C(0x205)
+ /* Returns the current value of a free running counter from the device. */
+ #define HWRM_MFG_TIMERS_QUERY UINT32_C(0x206)
+ /* Experimental */
+ #define HWRM_MFG_OTP_CFG UINT32_C(0x207)
+ /* Experimental */
+ #define HWRM_MFG_OTP_QCFG UINT32_C(0x208)
+ /*
+ * Tells the fw to run the DMA read from the host and DMA write
+ * to the host test.
+ */
+ #define HWRM_MFG_HDMA_TEST UINT32_C(0x209)
+ /* Experimental */
#define HWRM_DBG_READ_DIRECT UINT32_C(0xff10)
/* Experimental */
#define HWRM_DBG_READ_INDIRECT UINT32_C(0xff11)
struct ret_codes {
uint16_t error_code;
/* Request was successfully executed by the HWRM. */
- #define HWRM_ERR_CODE_SUCCESS UINT32_C(0x0)
+ #define HWRM_ERR_CODE_SUCCESS UINT32_C(0x0)
/* The HWRM failed to execute the request. */
- #define HWRM_ERR_CODE_FAIL UINT32_C(0x1)
+ #define HWRM_ERR_CODE_FAIL UINT32_C(0x1)
/*
* The request contains invalid argument(s) or input
* parameters.
*/
- #define HWRM_ERR_CODE_INVALID_PARAMS UINT32_C(0x2)
+ #define HWRM_ERR_CODE_INVALID_PARAMS UINT32_C(0x2)
/*
* The requester is not allowed to access the requested
* resource. This error code shall be provided in a
* response to a request to query or modify an existing
* resource that is not accessible by the requester.
*/
- #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED UINT32_C(0x3)
+ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED UINT32_C(0x3)
/*
* The HWRM is unable to allocate the requested resource.
* This code only applies to requests for HWRM resource
* allocations.
*/
- #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR UINT32_C(0x4)
+ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR UINT32_C(0x4)
/*
* Invalid combination of flags is specified in the
* request.
*/
- #define HWRM_ERR_CODE_INVALID_FLAGS UINT32_C(0x5)
+ #define HWRM_ERR_CODE_INVALID_FLAGS UINT32_C(0x5)
/*
* Invalid combination of enables fields is specified in
* the request.
*/
- #define HWRM_ERR_CODE_INVALID_ENABLES UINT32_C(0x6)
+ #define HWRM_ERR_CODE_INVALID_ENABLES UINT32_C(0x6)
/*
* Request contains a required TLV that is not supported by
* the installed version of firmware.
*/
- #define HWRM_ERR_CODE_UNSUPPORTED_TLV UINT32_C(0x7)
+ #define HWRM_ERR_CODE_UNSUPPORTED_TLV UINT32_C(0x7)
/*
* No firmware buffer available to accept the request. Driver
* should retry the request.
*/
- #define HWRM_ERR_CODE_NO_BUFFER UINT32_C(0x8)
+ #define HWRM_ERR_CODE_NO_BUFFER UINT32_C(0x8)
/*
* This error code is only reported by firmware when some
* sub-option of a supported HWRM command is unsupported.
*/
- #define HWRM_ERR_CODE_UNSUPPORTED_OPTION_ERR UINT32_C(0x9)
+ #define HWRM_ERR_CODE_UNSUPPORTED_OPTION_ERR UINT32_C(0x9)
/*
* This error code is only reported by firmware when the specific
* request is not able to process when the HOT reset in progress.
*/
- #define HWRM_ERR_CODE_HOT_RESET_PROGRESS UINT32_C(0xa)
+ #define HWRM_ERR_CODE_HOT_RESET_PROGRESS UINT32_C(0xa)
/*
* This error code is only reported by firmware when the registered
* driver instances are not capable of hot reset.
*/
- #define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb)
+ #define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb)
+ /*
+ * This error code is only reported by the firmware when during
+ * flow allocation when a requeest for a flow counter fails because
+ * the number of flow counters are exhausted.
+ */
+ #define HWRM_ERR_CODE_NO_FLOW_COUNTER_DURING_ALLOC UINT32_C(0xc)
+ /*
+ * This error code is only reported by firmware when the registered
+ * driver instances requested to offloaded a flow but was unable to because
+ * the requested key's hash collides with the installed keys.
+ */
+ #define HWRM_ERR_CODE_KEY_HASH_COLLISION UINT32_C(0xd)
+ /*
+ * This error code is only reported by firmware when the registered
+ * driver instances requested to offloaded a flow but was unable to because
+ * the same key has already been installed.
+ */
+ #define HWRM_ERR_CODE_KEY_ALREADY_EXISTS UINT32_C(0xe)
/*
* Generic HWRM execution error that represents an
* internal error.
*/
- #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf)
+ #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf)
/*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
* by itself, just an indicatation that the response should be parsed
* as TLV and the actual error code will be in the hwrm_resp_hdr TLV.
*/
- #define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000)
+ #define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000)
/* Unknown error */
- #define HWRM_ERR_CODE_UNKNOWN_ERR UINT32_C(0xfffe)
+ #define HWRM_ERR_CODE_UNKNOWN_ERR UINT32_C(0xfffe)
/* Unsupported or invalid command */
- #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED UINT32_C(0xffff)
+ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED UINT32_C(0xffff)
#define HWRM_ERR_CODE_LAST \
HWRM_ERR_CODE_CMD_NOT_SUPPORTED
uint16_t unused_0[3];
#define HW_HASH_KEY_SIZE 40
/* valid key for HWRM response */
#define HWRM_RESP_VALID_KEY 1
+/* Reserved for BONO processor */
+#define HWRM_TARGET_ID_BONO 0xFFF8
+/* Reserved for KONG processor */
+#define HWRM_TARGET_ID_KONG 0xFFF9
+/* Reserved for APE processor */
+#define HWRM_TARGET_ID_APE 0xFFFA
+/*
+ * This value will be used by tools for User-space HWRM Interface.
+ * When tool execute any HWRM command with this target_id, firmware
+ * will copy the response and/or data payload via register space instead
+ * of DMAing it.
+ */
+#define HWRM_TARGET_ID_TOOLS 0xFFFD
#define HWRM_VERSION_MAJOR 1
#define HWRM_VERSION_MINOR 10
#define HWRM_VERSION_UPDATE 0
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 48
-#define HWRM_VERSION_STR "1.10.0.48"
+#define HWRM_VERSION_RSVD 74
+#define HWRM_VERSION_STR "1.10.0.74"
/****************
* hwrm_ver_get *
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_ADV_FLOW_MGNT_SUPPORTED \
UINT32_C(0x1000)
+ /*
+ * If set to 1, the firmware is able to support TFLIB features.
+ * If set to 0, then the firmware doesn’t support TFLIB features.
+ * By default, this flag should be 0 for older version of core firmware.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_TFLIB_SUPPORTED \
+ UINT32_C(0x2000)
/*
* This field represents the major version of RoCE firmware.
* A change in major version represents a major release.
* firmware (ASCII chars with NULL at the end).
*/
char netctrl_fw_name[16];
- /*
- * This field is reserved for future use.
- * The responder should set it to 0.
- * The requester should ignore this field.
- */
- uint8_t reserved2[16];
+ /* This field represents the active board package name. */
+ char active_pkg_name[16];
/*
* This field represents the name of RoCE FW (ASCII chars
* with NULL at the end).
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \
UINT32_C(0x3c)
+ /* TFLIB unique default VNIC Configuration Change */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_DEFAULT_VNIC_CHANGE \
+ UINT32_C(0x3d)
+ /* TFLIB unique link status changed */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \
+ UINT32_C(0x3e)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERROR_RECOVERY_CAPABLE \
UINT32_C(0x800000)
+ /*
+ * If the query is for a VF, then this flag shall be ignored.
+ * If this query is for a PF and this flag is set to 1, then
+ * the PF has the capability to support extended stats.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_STATS_SUPPORTED \
+ UINT32_C(0x1000000)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
* the backing store.
*/
uint32_t tqm_max_entries_per_ring;
- /* Maximum number of MR/AV context entries supported for this function. */
+ /*
+ * Maximum number of MR plus AV context entries supported for this
+ * function.
+ */
uint32_t mrav_max_entries;
/* Number of bytes that must be allocated for each context entry. */
uint16_t mrav_entry_size;
uint16_t tim_entry_size;
/* Maximum number of Timer context entries supported for this function. */
uint32_t tim_max_entries;
- uint8_t unused_0[2];
+ /*
+ * When this field is zero, the 32b `mrav_num_entries` field in the
+ * `backing_store_cfg` and `backing_store_qcfg` commands represents
+ * the total number of MR plus AV entries allowed in the MR/AV backing
+ * store PBL.
+ *
+ * When this field is non-zero, the 32b `mrav_num_entries` field in
+ * the `backing_store_cfg` and `backing_store_qcfg` commands is
+ * logically divided into two 16b fields. Bits `[31:16]` represents
+ * the `mr_num_entries` and bits `[15:0]` represents `av_num_entries`.
+ * Both of these values are represented in a unit granularity
+ * specified by this field. For example, if this field is 16 and
+ * `mrav_num_entries` is `0x02000100`, then the number of MR entries
+ * is 8192 and the number of AV entries is 4096.
+ */
+ uint16_t mrav_num_entries_units;
/*
* The number of entries specified for any TQM ring must be a
* multiple of this value to prevent any resource allocation
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \
UINT32_C(0x1)
+ /*
+ * When set, the 32b `mrav_num_entries` field is logically divided
+ * into two 16b fields, `mr_num_entries` and `av_num_entries`.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_MRAV_RESERVATION_SPLIT \
+ UINT32_C(0x2)
uint32_t enables;
/*
* This bit must be '1' for the qp fields to be
* the backing store.
*/
uint32_t tqm_ring7_num_entries;
- /* Number of MR/AV entries. */
+ /*
+ * If the MR/AV split reservation flag is not set, then this field
+ * represents the total number of MR plus AV entries. For versions
+ * of firmware that support the split reservation, when it is not
+ * specified half of the entries will be reserved for MRs and the
+ * other half for AVs.
+ *
+ * If the MR/AV split reservation flag is set, then this
+ * field is logically divided into two 16b fields. Bits `[31:16]`
+ * represents the `mr_num_entries` and bits `[15:0]` represents
+ * `av_num_entries`. The granularity of these values is defined by
+ * the `mrav_num_entries_unit` field returned by the
+ * `backing_store_qcaps` command.
+ */
uint32_t mrav_num_entries;
/* Number of Timer entries. */
uint32_t tim_num_entries;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \
UINT32_C(0x1)
+ /*
+ * When set, the 32b `mrav_num_entries` field is logically divided
+ * into two 16b fields, `mr_num_entries` and `av_num_entries`.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_MRAV_RESERVATION_SPLIT \
+ UINT32_C(0x2)
uint8_t unused_0[4];
/*
* This bit must be '1' for the qp fields to be
uint32_t tqm_ring6_num_entries;
/* Number of TQM ring 7 entries. */
uint32_t tqm_ring7_num_entries;
- /* Number of MR/AV entries. */
+ /*
+ * If the MR/AV split reservation flag is not set, then this field
+ * represents the total number of MR plus AV entries. For versions
+ * of firmware that support the split reservation, when it is not
+ * specified half of the entries will be reserved for MRs and the
+ * other half for AVs.
+ *
+ * If the MR/AV split reservation flag is set, then this
+ * field is logically divided into two 16b fields. Bits `[31:16]`
+ * represents the `mr_num_entries` and bits `[15:0]` represents
+ * `av_num_entries`. The granularity of these values is defined by
+ * the `mrav_num_entries_unit` field returned by the
+ * `backing_store_qcaps` command.
+ */
uint32_t mrav_num_entries;
/* Number of Timer entries. */
uint32_t tim_num_entries;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*********************/
-/* hwrm_port_mac_cfg_input (size:320b/40B) */
+/* hwrm_port_mac_cfg_input (size:384b/48B) */
struct hwrm_port_mac_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \
UINT32_C(0x1000)
+ /*
+ * When this bit is set to '1', and the ptp_tx_ts_capture_enable
+ * bit is set, then the device uses one step Tx timestamping.
+ * This bit is temporary and used for experimental purposes.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_ONE_STEP_TX_TS \
+ UINT32_C(0x2000)
uint32_t enables;
/*
* This bit must be '1' for the ipg field to be
*/
#define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \
UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the ptp_freq_adj_ppb field to be
+ * configured.
+ */
+ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_PTP_FREQ_ADJ_PPB \
+ UINT32_C(0x200)
/* Port ID of port that is to be configured. */
uint16_t port_id;
/*
#define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \
5
uint8_t unused_0[3];
+ /*
+ * This signed field specifies by how much to adjust the frequency
+ * of sync timer updates (measured in parts per billion).
+ */
+ int32_t ptp_freq_adj_ppb;
+ uint8_t unused_1[4];
} __attribute__((packed));
/* hwrm_port_mac_cfg_output (size:128b/16B) */
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \
UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the device supports one-step
+ * Tx timestamping.
+ */
+ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_ONE_STEP_TX_TS \
+ UINT32_C(0x4)
uint8_t unused_0[3];
/* Offset of the PTP register for the lower 32 bits of timestamp for RX. */
uint32_t rx_ts_reg_off_lower;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
} __attribute__((packed));
/* Port Rx Statistics extended Formats */
-/* rx_port_stats_ext (size:2368b/296B) */
+/* rx_port_stats_ext (size:3648b/456B) */
struct rx_port_stats_ext {
/* Number of times link state changed to down */
uint64_t link_down_events;
uint64_t pfc_pri7_rx_duration_us;
/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
uint64_t pfc_pri7_rx_transitions;
+ /* Total number of received bits */
+ uint64_t rx_bits;
+ /* The number of events where the port receive buffer was over 85% full */
+ uint64_t rx_buffer_passed_threshold;
+ /*
+ * The number of symbol errors that wasn't corrected by FEC correction
+ * alogirithm
+ */
+ uint64_t rx_pcs_symbol_err;
+ /* The number of corrected bits on the port according to active FEC */
+ uint64_t rx_corrected_bits;
+ /* Total number of rx discard bytes count on cos queue 0 */
+ uint64_t rx_discard_bytes_cos0;
+ /* Total number of rx discard bytes count on cos queue 1 */
+ uint64_t rx_discard_bytes_cos1;
+ /* Total number of rx discard bytes count on cos queue 2 */
+ uint64_t rx_discard_bytes_cos2;
+ /* Total number of rx discard bytes count on cos queue 3 */
+ uint64_t rx_discard_bytes_cos3;
+ /* Total number of rx discard bytes count on cos queue 4 */
+ uint64_t rx_discard_bytes_cos4;
+ /* Total number of rx discard bytes count on cos queue 5 */
+ uint64_t rx_discard_bytes_cos5;
+ /* Total number of rx discard bytes count on cos queue 6 */
+ uint64_t rx_discard_bytes_cos6;
+ /* Total number of rx discard bytes count on cos queue 7 */
+ uint64_t rx_discard_bytes_cos7;
+ /* Total number of rx discard packets count on cos queue 0 */
+ uint64_t rx_discard_packets_cos0;
+ /* Total number of rx discard packets count on cos queue 1 */
+ uint64_t rx_discard_packets_cos1;
+ /* Total number of rx discard packets count on cos queue 2 */
+ uint64_t rx_discard_packets_cos2;
+ /* Total number of rx discard packets count on cos queue 3 */
+ uint64_t rx_discard_packets_cos3;
+ /* Total number of rx discard packets count on cos queue 4 */
+ uint64_t rx_discard_packets_cos4;
+ /* Total number of rx discard packets count on cos queue 5 */
+ uint64_t rx_discard_packets_cos5;
+ /* Total number of rx discard packets count on cos queue 6 */
+ uint64_t rx_discard_packets_cos6;
+ /* Total number of rx discard packets count on cos queue 7 */
+ uint64_t rx_discard_packets_cos7;
} __attribute__((packed));
/************************
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
uint8_t valid;
} __attribute__((packed));
+/***********************
+ * hwrm_port_prbs_test *
+ ***********************/
+
+
+/* hwrm_port_prbs_test_input (size:384b/48B) */
+struct hwrm_port_prbs_test_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address data is to DMA'd to. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware may
+ * use this entire buffer or less than the entire buffer, but never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where PRBS test to be run. */
+ uint16_t port_id;
+ /* Polynomial selection for PRBS test. */
+ uint16_t poly;
+ /* PRBS7 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS7 UINT32_C(0x0)
+ /* PRBS9 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS9 UINT32_C(0x1)
+ /* PRBS11 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS11 UINT32_C(0x2)
+ /* PRBS15 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS15 UINT32_C(0x3)
+ /* PRBS23 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS23 UINT32_C(0x4)
+ /* PRBS31 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS31 UINT32_C(0x5)
+ /* PRBS58 */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_PRBS58 UINT32_C(0x6)
+ /* Invalid */
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID UINT32_C(0xff)
+ #define HWRM_PORT_PRBS_TEST_INPUT_POLY_LAST \
+ HWRM_PORT_PRBS_TEST_INPUT_POLY_INVALID
+ /*
+ * Configuration bits for PRBS test.
+ * Use enable bit to start/stop test.
+ * Use tx/rx lane map bits to run test on specific lanes,
+ * if set to 0 test will be run on all lanes.
+ */
+ uint16_t prbs_config;
+ /*
+ * Set 0 to stop test currently in progress
+ * Set 1 to start test with configuration provided.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_START_STOP \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, tx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_TX_LANE_MAP_VALID \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, rx_lane_map bitmap should have lane bits set.
+ * If set to 0, test will be run on all lanes for this port.
+ */
+ #define HWRM_PORT_PRBS_TEST_INPUT_PRBS_CONFIG_RX_LANE_MAP_VALID \
+ UINT32_C(0x4)
+ /* Duration in seconds to run the PRBS test. */
+ uint16_t timeout;
+ /*
+ * If tx_lane_map_valid is set to 1, this field is a bitmap
+ * of tx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t tx_lane_map;
+ /*
+ * If rx_lane_map_valid is set to 1, this field is a bitmap
+ * of rx lanes to run PRBS test. bit0 = lane0,
+ * bit1 = lane1 ..bit31 = lane31
+ */
+ uint32_t rx_lane_map;
+} __attribute__((packed));
+
+/* hwrm_port_prbs_test_output (size:128b/16B) */
+struct hwrm_port_prbs_test_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/***********************
* hwrm_queue_qportcfg *
***********************/
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
UINT32_C(0x80)
- uint8_t unused_1[7];
+ /*
+ * This field advertises the maximum concurrent TPA aggregations
+ * supported by the VNIC on new devices that support TPA v2.
+ * '0' means that TPA v2 is not supported.
+ */
+ uint16_t max_aggs_supported;
+ uint8_t unused_1[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
UINT32_C(0x80)
+ /*
+ * When this bit is '1' and the GRO mode is enabled,
+ * the VNIC shall DMA payload data using GRO rules.
+ * When this bit is '0', the VNIC shall DMA payload data
+ * using the more efficient LRO rules of filling all
+ * aggregation buffers.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_PACK_AS_GRO \
+ UINT32_C(0x100)
uint32_t enables;
/*
* This bit must be '1' for the max_agg_segs field to be
* configured.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
- /*
- * This bit must be '1' for the min_agg_len field to be
- * configured.
- */
+ /* deprecated bit. Do not use!!! */
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
/* Logical vnic ID */
uint16_t vnic_id;
/*
* This is the maximum number of TCP segments that can
- * be aggregated (unit is Log2). Max value is 31.
+ * be aggregated (unit is Log2). Max value is 31. On new
+ * devices supporting TPA v2, the unit is multiples of 4 and
+ * valid values are > 0 and <= 63.
*/
uint16_t max_agg_segs;
/* 1 segment */
HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
/*
* This is the maximum number of aggregations this VNIC is
- * allowed (unit is Log2). Max value is 7
+ * allowed (unit is Log2). Max value is 7. On new devices
+ * supporting TPA v2, this is in unit of 1 and must be > 0
+ * and <= max_aggs_supported in the hwrm_vnic_qcaps response
+ * to enable TPA v2.
*/
uint16_t max_aggs;
/* 1 aggregation */
uint32_t max_agg_timer;
/*
* This is the minimum amount of payload length required to
- * start an aggregation context.
+ * start an aggregation context. This field is deprecated and
+ * should be set to 0. The minimum length is set by firmware
+ * and can be queried using hwrm_vnic_tpa_qcfg.
*/
uint32_t min_agg_len;
} __attribute__((packed));
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
(UINT32_C(0x2) << 4)
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \
HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE
+ /*
+ * Setting of this flag indicates that no XDP filter is created with
+ * L2 filter.
+ * 0 - legacy behavior, XDP filter is created with L2 filter
+ * 1 - XDP filter won't be created with L2 filter
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_XDP_DISABLE \
+ UINT32_C(0x40)
+ /*
+ * Setting this flag to 1 indicate the L2 fields in this command
+ * pertain to source fields. Setting this flag to 0 indicate the
+ * L2 fields in this command pertain to the destination fields
+ * and this is the default/legacy behavior.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_SOURCE_VALID \
+ UINT32_C(0x80)
uint32_t enables;
/*
* This bit must be '1' for the l2_addr field to be
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_NUM_VLANS \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the t_num_vlans field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_NUM_VLANS \
+ UINT32_C(0x40000)
/*
* This value sets the match value for the L2 MAC address.
* Destination MAC address for RX path.
* Source MAC address for TX path.
*/
uint8_t l2_addr[6];
- uint8_t unused_0[2];
+ /* This value sets the match value for the number of VLANs. */
+ uint8_t num_vlans;
+ /*
+ * This value sets the match value for the number of VLANs
+ * in the tunnel headers.
+ */
+ uint8_t t_num_vlans;
/*
* This value sets the mask value for the L2 address.
* A value of 0 will mask the corresponding bit from
*/
uint64_t l2_filter_id;
/*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_L2_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/* This value is an opaque id into CFA data structures. */
uint64_t tunnel_filter_id;
/*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_TUNNEL_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
********************************/
-/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
+/* hwrm_cfa_ntuple_filter_alloc_input (size:1088b/136B) */
struct hwrm_cfa_ntuple_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the rfs_ring_tbl_idx field to be
+ * configured.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \
+ UINT32_C(0x80000)
/*
* This value identifies a set of CFA data structures used for an L2
* context.
* the pri_hint.
*/
uint64_t ntuple_filter_id_hint;
+ /*
+ * The value of rfs_ring_tbl_idx to be used for RFS for this filter.
+ * This index is used in lieu of the RSS hash when selecting the
+ * index into the RSS table to determine the rx ring.
+ */
+ uint16_t rfs_ring_tbl_idx;
+ uint8_t unused_0[6];
} __attribute__((packed));
/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
/* This value is an opaque id into CFA data structures. */
uint64_t ntuple_filter_id;
/*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_NTUPLE_FILTER_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/* This value is an opaque id into CFA data structures. */
uint64_t em_filter_id;
/*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_EM_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
UINT32_C(0x1000)
+ /*
+ * If set to 1 there will be no attempt to allocate an on-chip try to
+ * offload this flow. If set to 0, which will keep compatibility with the
+ * older drivers, will cause the FW to attempt to allocate an on-chip flow
+ * counter for the newly created flow. This will keep the existing behavior
+ * with EM flows which always had an associated flow counter.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \
+ UINT32_C(0x2000)
/*
* Tx Flow: pf or vf fid.
* Rx Flow: vf fid.
uint16_t flow_handle;
uint8_t unused_0[2];
/*
- * This is the ID of the flow associated with this
- * filter.
- * This value shall be used to match and associate the
- * flow identifier returned in completion records.
- * A value of 0xFFFFFFFF shall indicate no flow id.
+ * The flow id value in bit 0-29 is the actual ID of the flow
+ * associated with this filter and it shall be used to match
+ * and associate the flow identifier returned in completion
+ * records. A value of 0xFFFFFFFF in the 32-bit flow_id field
+ * shall indicate no valid flow id.
*/
uint32_t flow_id;
+ /* Indicate the flow id value. */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_VALUE_SFT 0
+ /* Indicate type of the flow. */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE \
+ UINT32_C(0x40000000)
+ /*
+ * If this bit set to 0, then it indicates that the flow is
+ * internal flow.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_INT \
+ (UINT32_C(0x0) << 30)
+ /*
+ * If this bit is set to 1, then it indicates that the flow is
+ * external flow.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_LAST \
+ HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_TYPE_EXT
+ /* Indicate the flow direction. */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR \
+ UINT32_C(0x80000000)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_RX \
+ (UINT32_C(0x0) << 31)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_LAST \
+ HWRM_CFA_FLOW_ALLOC_OUTPUT_FLOW_ID_DIR_TX
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
uint32_t flow_counter_id;
uint8_t valid;
} __attribute__((packed));
+/* hwrm_cfa_flow_alloc_cmd_err (size:64b/8B) */
+struct hwrm_cfa_flow_alloc_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* No more L2 Context TCAM */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_L2_CONTEXT_TCAM UINT32_C(0x1)
+ /* No more action records */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_ACTION_RECORD UINT32_C(0x2)
+ /* No more flow counters */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_COUNTER UINT32_C(0x3)
+ /* No more wild-card TCAM */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_WILD_CARD_TCAM UINT32_C(0x4)
+ /* Hash collsion in exact match tables */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_HASH_COLLISION UINT32_C(0x5)
+ /* Key is already installed */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_KEY_EXISTS UINT32_C(0x6)
+ /* Flow Context DB is out of resource */
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB UINT32_C(0x7)
+ #define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_LAST \
+ HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
/**********************
* hwrm_cfa_flow_free *
**********************/
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
uint64_t resp_addr;
/* Flow record index. */
uint16_t flow_handle;
- uint8_t unused_0[6];
+ uint16_t unused_0;
+ /* Flow counter id to be freed. */
+ uint32_t flow_counter_id;
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
} __attribute__((packed));
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
UINT32_C(0x2)
+ /* Set to 1 to indicate the flow counter IDs are included in the flow table. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \
+ UINT32_C(0x8000000)
/*
* This specifies the size of flow handle entries provided by the driver
* in the flow table specified below. Only two flow handle size enums are defined.
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
***************************/
-/* hwrm_cfa_flow_aging_cfg_input (size:256b/32B) */
+/* hwrm_cfa_flow_aging_cfg_input (size:384b/48B) */
struct hwrm_cfa_flow_aging_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/* This bit must be '1' for the udp flow timer field to be configured */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_UDP_FLOW_TIMER \
UINT32_C(0x4)
- /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
+ /* This bit must be '1' for the eem dma interval field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_DMA_INTERVAL \
+ UINT32_C(0x8)
+ /* This bit must be '1' for the eem notice interval field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_NOTICE_INTERVAL \
+ UINT32_C(0x10)
+ /* This bit must be '1' for the eem context memory maximum entries field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MAX_ENTRIES \
+ UINT32_C(0x20)
+ /* This bit must be '1' for the eem context memory ID field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the eem context memory type field to be configured */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MEM_TYPE \
+ UINT32_C(0x80)
uint8_t flags;
/* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
/* rx path */
- #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX
+ /* Enumeration denoting the enable, disable eem flow aging configuration. */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM UINT32_C(0x2)
+ /* tx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_DISABLE \
+ (UINT32_C(0x0) << 1)
+ /* rx path */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_LAST \
+ HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE
uint8_t unused_0;
/* The flow aging timer for all TCP flows, the unit is 100 milliseconds. */
uint32_t tcp_flow_timer;
uint32_t tcp_fin_timer;
/* The flow aging timer for all UDP flows, the unit is 100 milliseconds. */
uint32_t udp_flow_timer;
+ /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ uint16_t eem_dma_interval;
+ /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ uint16_t eem_notice_interval;
+ /* The maximum entries number in the eem context memory. */
+ uint32_t eem_ctx_max_entries;
+ /* The context memory ID for eem flow aging. */
+ uint16_t eem_ctx_id;
+ uint16_t eem_ctx_mem_type;
+ /* The content of context memory is eem ejection data, the size of each entry is 4 bytes. */
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA \
+ UINT32_C(0x0)
+ #define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \
+ HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA
+ uint8_t unused_1[4];
} __attribute__((packed));
/* hwrm_cfa_flow_aging_cfg_output (size:128b/16B) */
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
uint8_t unused_0[7];
} __attribute__((packed));
-/* hwrm_cfa_flow_aging_qcfg_output (size:192b/24B) */
+/* hwrm_cfa_flow_aging_qcfg_output (size:320b/40B) */
struct hwrm_cfa_flow_aging_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
uint32_t tcp_fin_timer;
/* The current flow aging timer for all UDP flows, the unit is 100 millisecond. */
uint32_t udp_flow_timer;
- uint8_t unused_0[3];
+ /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ uint16_t eem_dma_interval;
+ /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ uint16_t eem_notice_interval;
+ /* The maximum entries number in the eem context memory. */
+ uint32_t eem_ctx_max_entries;
+ /* The context memory ID for eem flow aging. */
+ uint16_t eem_ctx_id;
+ /* The context memory type for eem flow aging. */
+ uint16_t eem_ctx_mem_type;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
* which are to be offloaded.
* Note if this bit is set then the path_rx bit can't be set.
*/
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
/*
* When set to 1, indicates the configuration will apply to RX flows
* which are to be offloaded.
* Note if this bit is set then the path_tx bit can't be set.
*/
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, indicates the the FW supports the Centralized
+ * Memory Model. The concept designates one entity for the
+ * memory allocation while all others ‘subscribe’ to it.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, indicates the the FW supports the Detached
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
+ * or semi-direct access to the allocated memory while none of
+ * which can interfere with the management of the memory.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x8)
uint32_t unused_0;
uint32_t supported;
/*
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/* When set to 1, all offloaded flows will be sent to EEM. */
#define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
UINT32_C(0x4)
- uint32_t unused_0;
+ /* When set to 1, secondary, 0 means primary. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ UINT32_C(0x8)
+ /*
+ * Group_id which used by Firmware to identify memory pools belonging
+ * to certain group.
+ */
+ uint16_t group_id;
+ uint16_t unused_0;
/*
* Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
* RECORD, EFC all have the same number of entries and all tables will be configured
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
UINT32_C(0x40)
+ /*
+ * Value of 1 to indicate that firmware supports the dynamic allocation of an
+ * on-chip flow counter which can be used for EEM flows.
+ * Value of 0 indicates firmware does not support the dynamic allocation of an
+ * on-chip flow counter.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
+ UINT32_C(0x80)
+ /*
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command.
+ * Value of 0 indicates firmware does not support rfs_ring_tbl_idx.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \
+ UINT32_C(0x100)
+ /*
+ * Value of 1 to indicate that firmware supports untagged matching
+ * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0
+ * indicates firmware does not support untagged matching.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \
+ UINT32_C(0x200)
+ /*
+ * Value of 1 to indicate that firmware supports XDP filter. Value
+ * of 0 indicates firmware does not support XDP filter.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \
+ UINT32_C(0x400)
+ /*
+ * Value of 1 to indicate that the firmware support L2 header source
+ * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command.
+ * Value of 0 indicates firmware does not support L2 header source
+ * fields matching.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
+ UINT32_C(0x800)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
uint8_t valid;
} __attribute__((packed));
+/******************
+ * hwrm_cfa_tflib *
+ ******************/
+
+
+/* hwrm_cfa_tflib_input (size:1024b/128B) */
+struct hwrm_cfa_tflib_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* unused. */
+ uint8_t unused0[4];
+ /* TFLIB request data. */
+ uint32_t tf_req[26];
+} __attribute__((packed));
+
+/* hwrm_cfa_tflib_output (size:5632b/704B) */
+struct hwrm_cfa_tflib_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* TFLIB response code */
+ uint32_t tf_resp_code;
+ /* TFLIB response data. */
+ uint32_t tf_resp[170];
+ /* unused. */
+ uint8_t unused1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/******************************
* hwrm_tunnel_dst_port_query *
******************************/
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
uint32_t reserved_size;
/* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */
uint32_t available_size;
- uint8_t unused_0[3];
+ /* This field represents the major version of NVM cfg */
+ uint8_t nvm_cfg_ver_maj;
+ /* This field represents the minor version of NVM cfg */
+ uint8_t nvm_cfg_ver_min;
+ /* This field represents the update version of NVM cfg */
+ uint8_t nvm_cfg_ver_upd;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
/*
* The target ID of the command:
* * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
* * 0xFFFF - HWRM
*/
uint16_t target_id;
git.droids-corp.org / dpdk.git / commitdiff