net/mlx5: support reading module EEPROM data

This patch implements ethdev operations get_module_info and
get_module_eeprom, to support ethtool commands ETHTOOL_GMODULEINFO
and ETHTOOL_GMODULEEEPROM.

New functions mlx5_get_module_info() and mlx5_get_module_eeprom()
added in mlx5_ethdev.c.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 14259d9..0528ed3 100644 (file)
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -996,6 +996,8 @@ const struct eth_dev_ops mlx5_dev_ops = {
        .rx_queue_intr_disable = mlx5_rx_intr_disable,
        .is_removed = mlx5_is_removed,
        .udp_tunnel_port_add  = mlx5_udp_tunnel_port_add,
+       .get_module_info = mlx5_get_module_info,
+       .get_module_eeprom = mlx5_get_module_eeprom,
 };
 
 /* Available operations from secondary process. */
@@ -1009,6 +1011,8 @@ static const struct eth_dev_ops mlx5_dev_sec_ops = {
        .dev_infos_get = mlx5_dev_infos_get,
        .rx_descriptor_status = mlx5_rx_descriptor_status,
        .tx_descriptor_status = mlx5_tx_descriptor_status,
+       .get_module_info = mlx5_get_module_info,
+       .get_module_eeprom = mlx5_get_module_eeprom,
 };
 
 /* Available operations in flow isolated mode. */
@@ -1052,6 +1056,8 @@ const struct eth_dev_ops mlx5_dev_ops_isolate = {
        .rx_queue_intr_enable = mlx5_rx_intr_enable,
        .rx_queue_intr_disable = mlx5_rx_intr_disable,
        .is_removed = mlx5_is_removed,
+       .get_module_info = mlx5_get_module_info,
+       .get_module_eeprom = mlx5_get_module_eeprom,
 };
 
 /**

diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index dbdc3ce..239b56c 100644 (file)
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -728,6 +728,10 @@ void mlx5_translate_port_name(const char *port_name_in,
                              struct mlx5_switch_info *port_info_out);
 void mlx5_intr_callback_unregister(const struct rte_intr_handle *handle,
                                   rte_intr_callback_fn cb_fn, void *cb_arg);
+int mlx5_get_module_info(struct rte_eth_dev *dev,
+                        struct rte_eth_dev_module_info *modinfo);
+int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
+                          struct rte_dev_eeprom_info *info);
 
 /* mlx5_mac.c */
 

diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 33a32fc..c68e773 100644 (file)
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1928,3 +1928,89 @@ mlx5_translate_port_name(const char *port_name_in,
        port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
        return;
 }
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM information (type and size).
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] modinfo
+ *   Storage for plug-in module EEPROM information.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_get_module_info(struct rte_eth_dev *dev,
+                    struct rte_eth_dev_module_info *modinfo)
+{
+       struct ethtool_modinfo info = {
+               .cmd = ETHTOOL_GMODULEINFO,
+       };
+       struct ifreq ifr = (struct ifreq) {
+               .ifr_data = (void *)&info,
+       };
+       int ret = 0;
+
+       if (!dev || !modinfo) {
+               DRV_LOG(WARNING, "missing argument, cannot get module info");
+               rte_errno = EINVAL;
+               return -rte_errno;
+       }
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret) {
+               DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+               return ret;
+       }
+       modinfo->type = info.type;
+       modinfo->eeprom_len = info.eeprom_len;
+       return ret;
+}
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM data.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] info
+ *   Storage for plug-in module EEPROM data.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
+                          struct rte_dev_eeprom_info *info)
+{
+       struct ethtool_eeprom *eeprom;
+       struct ifreq ifr;
+       int ret = 0;
+
+       if (!dev || !info) {
+               DRV_LOG(WARNING, "missing argument, cannot get module eeprom");
+               rte_errno = EINVAL;
+               return -rte_errno;
+       }
+       eeprom = rte_calloc(__func__, 1,
+                           (sizeof(struct ethtool_eeprom) + info->length), 0);
+       if (!eeprom) {
+               DRV_LOG(WARNING, "port %u cannot allocate memory for "
+                       "eeprom data", dev->data->port_id);
+               rte_errno = ENOMEM;
+               return -rte_errno;
+       }
+       eeprom->cmd = ETHTOOL_GMODULEEEPROM;
+       eeprom->offset = info->offset;
+       eeprom->len = info->length;
+       ifr = (struct ifreq) {
+               .ifr_data = (void *)eeprom,
+       };
+       ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
+       if (ret)
+               DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
+                       dev->data->port_id, strerror(rte_errno));
+       else
+               rte_memcpy(info->data, eeprom->data, info->length);
+       rte_free(eeprom);
+       return ret;
+}