F: drivers/crypto/zuc/
F: doc/guides/cryptodevs/zuc.rst
-LibCrypto PMD
+OpenSSL PMD
M: Declan Doherty <declan.doherty@intel.com>
-F: drivers/crypto/libcrypto/
-F: doc/guides/cryptodevs/libcrypto.rst
+F: drivers/crypto/openssl/
+F: doc/guides/cryptodevs/openssl.rst
Null Crypto PMD
M: Declan Doherty <declan.doherty@intel.com>
}
}
- /* Create 2 LIBCRYPTO devices if required */
- if (gbl_cryptodev_type == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
-#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
- RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ /* Create 2 OPENSSL devices if required */
+ if (gbl_cryptodev_type == RTE_CRYPTODEV_OPENSSL_PMD) {
+#ifndef RTE_LIBRTE_PMD_OPENSSL
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_OPENSSL must be"
" enabled in config file to run this testsuite.\n");
return TEST_FAILED;
#endif
nb_devs = rte_cryptodev_count_devtype(
- RTE_CRYPTODEV_LIBCRYPTO_PMD);
+ RTE_CRYPTODEV_OPENSSL_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
ret = rte_eal_vdev_init(
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD),
NULL);
TEST_ASSERT(ret == 0, "Failed to create "
"instance %u of pmd : %s", i,
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD));
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
}
}
}
}
static int
-test_AES_chain_libcrypto_all(void)
+test_AES_chain_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ RTE_CRYPTODEV_OPENSSL_PMD,
BLKCIPHER_AES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
}
static int
-test_AES_cipheronly_libcrypto_all(void)
+test_AES_cipheronly_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ RTE_CRYPTODEV_OPENSSL_PMD,
BLKCIPHER_AES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
}
static int
-test_authonly_libcrypto_all(void)
+test_authonly_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ RTE_CRYPTODEV_OPENSSL_PMD,
BLKCIPHER_AUTHONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
}
static int
-test_3DES_chain_libcrypto_all(void)
+test_3DES_chain_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ RTE_CRYPTODEV_OPENSSL_PMD,
BLKCIPHER_3DES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
}
static int
-test_3DES_cipheronly_libcrypto_all(void)
+test_3DES_cipheronly_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ RTE_CRYPTODEV_OPENSSL_PMD,
BLKCIPHER_3DES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
}
};
-static struct unit_test_suite cryptodev_libcrypto_testsuite = {
- .suite_name = "Crypto Device LIBCRYPTO Unit Test Suite",
+static struct unit_test_suite cryptodev_openssl_testsuite = {
+ .suite_name = "Crypto Device OPENSSL Unit Test Suite",
.setup = testsuite_setup,
.teardown = testsuite_teardown,
.unit_test_cases = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_multi_session_random_usage),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_chain_libcrypto_all),
+ test_AES_chain_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_cipheronly_libcrypto_all),
+ test_AES_cipheronly_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_3DES_chain_libcrypto_all),
+ test_3DES_chain_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_3DES_cipheronly_libcrypto_all),
+ test_3DES_cipheronly_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_authonly_libcrypto_all),
+ test_authonly_openssl_all),
/** AES GCM Authenticated Encryption */
TEST_CASE_ST(ut_setup, ut_teardown,
}
static int
-test_cryptodev_libcrypto(void)
+test_cryptodev_openssl(void)
{
- gbl_cryptodev_type = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+ gbl_cryptodev_type = RTE_CRYPTODEV_OPENSSL_PMD;
- return unit_test_suite_runner(&cryptodev_libcrypto_testsuite);
+ return unit_test_suite_runner(&cryptodev_openssl_testsuite);
}
static int
REGISTER_TEST_COMMAND(cryptodev_qat_autotest, test_cryptodev_qat);
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest, test_cryptodev_aesni_mb);
-REGISTER_TEST_COMMAND(cryptodev_libcrypto_autotest, test_cryptodev_libcrypto);
+REGISTER_TEST_COMMAND(cryptodev_openssl_autotest, test_cryptodev_openssl);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_autotest, test_cryptodev_aesni_gcm);
REGISTER_TEST_COMMAND(cryptodev_null_autotest, test_cryptodev_null);
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_autotest, test_cryptodev_sw_snow3g);
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_5,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_5,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_6,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
.test_data = &aes_test_data_6,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
.test_data = &aes_test_data_8,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_8,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_9,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_9,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr =
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
.test_descr = "AES-128-CBC Encryption",
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CBC Decryption",
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-192-CBC Encryption",
.test_data = &aes_test_data_10,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-192-CBC Decryption",
.test_data = &aes_test_data_10,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-256-CBC Encryption",
.test_data = &aes_test_data_11,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-256-CBC Decryption",
.test_data = &aes_test_data_11,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CTR Encryption",
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-128-CTR Decryption",
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-192-CTR Encryption",
.test_data = &aes_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-192-CTR Decryption",
.test_data = &aes_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-256-CTR Encryption",
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "AES-256-CTR Decryption",
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
switch (cryptodev_type) {
case RTE_CRYPTODEV_QAT_SYM_PMD:
- case RTE_CRYPTODEV_LIBCRYPTO_PMD:
+ case RTE_CRYPTODEV_OPENSSL_PMD:
digest_len = tdata->digest.len;
break;
case RTE_CRYPTODEV_AESNI_MB_PMD:
case RTE_CRYPTODEV_QAT_SYM_PMD:
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT;
break;
- case RTE_CRYPTODEV_LIBCRYPTO_PMD:
- target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO;
+ case RTE_CRYPTODEV_OPENSSL_PMD:
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL;
break;
default:
TEST_ASSERT(0, "Unrecognized cryptodev type");
#define BLOCKCIPHER_TEST_TARGET_PMD_MB 0x0001 /* Multi-buffer flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_QAT 0x0002 /* QAT flag */
-#define BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO 0x0004 /* SW LIBCRYPTO flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL 0x0004 /* SW OPENSSL flag */
#define BLOCKCIPHER_TEST_OP_CIPHER (BLOCKCIPHER_TEST_OP_ENCRYPT | \
BLOCKCIPHER_TEST_OP_DECRYPT)
.test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest",
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CBC HMAC-SHA1 Decryption Digest Verify",
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CBC SHA1 Encryption Digest",
.test_data = &triple_des128cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-128-CBC SHA1 Decryption Digest Verify",
.test_data = &triple_des128cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-192-CBC HMAC-SHA1 Encryption Digest",
.test_data = &triple_des192cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CBC HMAC-SHA1 Decryption Digest Verify",
.test_data = &triple_des192cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CBC SHA1 Encryption Digest",
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-192-CBC SHA1 Decryption Digest Verify",
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-128-CTR HMAC-SHA1 Encryption Digest",
.test_data = &triple_des128ctr_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CTR HMAC-SHA1 Decryption Digest Verify",
.test_data = &triple_des128ctr_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CTR SHA1 Encryption Digest",
.test_data = &triple_des128ctr_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-128-CTR SHA1 Decryption Digest Verify",
.test_data = &triple_des128ctr_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-192-CTR HMAC-SHA1 Encryption Digest",
.test_data = &triple_des192ctr_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CTR HMAC-SHA1 Decryption Digest Verify",
.test_data = &triple_des192ctr_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CTR SHA1 Encryption Digest",
.test_data = &triple_des192ctr_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-192-CTR SHA1 Decryption Digest Verify",
.test_data = &triple_des192ctr_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest OOP",
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr =
.test_data = &triple_des128cbc_hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
.test_descr = "3DES-128-CBC Encryption",
.test_data = &triple_des128cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CBC Decryption",
.test_data = &triple_des128cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CBC Encryption",
.test_data = &triple_des192cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CBC Decryption",
.test_data = &triple_des192cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CTR Encryption",
.test_data = &triple_des128ctr_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-128-CTR Decryption",
.test_data = &triple_des128ctr_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CTR Encryption",
.test_data = &triple_des192ctr_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "3DES-192-CTR Decryption",
.test_data = &triple_des192ctr_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
}
};
.test_descr = "MD5 Digest",
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "MD5 Digest Verify",
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-MD5 Digest",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-MD5 Digest Verify",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA1 Digest",
.test_data = &sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA1 Digest Verify",
.test_data = &sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA1 Digest",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA1 Digest Verify",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA224 Digest",
.test_data = &sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA224 Digest Verify",
.test_data = &sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA224 Digest",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA224 Digest Verify",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA256 Digest",
.test_data = &sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA256 Digest Verify",
.test_data = &sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA256 Digest",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA256 Digest Verify",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA384 Digest",
.test_data = &sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA384 Digest Verify",
.test_data = &sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA384 Digest",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA384 Digest Verify",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA512 Digest",
.test_data = &sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "SHA512 Digest Verify",
.test_data = &sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA512 Digest",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "HMAC-SHA512 Digest Verify",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
unsigned int cipher_key_len,
enum rte_crypto_auth_algorithm auth_algo);
static struct rte_cryptodev_sym_session *
-test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+test_perf_create_openssl_session(uint8_t dev_id, enum chain_mode chain,
enum rte_crypto_cipher_algorithm cipher_algo,
unsigned int cipher_key_len,
enum rte_crypto_auth_algorithm auth_algo);
}
}
- /* Create 2 LIBCRYPTO devices if required */
- if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
-#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
- RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ /* Create 2 OPENSSL devices if required */
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_OPENSSL_PMD) {
+#ifndef RTE_LIBRTE_PMD_OPENSSL
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_OPENSSL must be"
" enabled in config file to run this testsuite.\n");
return TEST_FAILED;
#endif
nb_devs = rte_cryptodev_count_devtype(
- RTE_CRYPTODEV_LIBCRYPTO_PMD);
+ RTE_CRYPTODEV_OPENSSL_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
ret = rte_eal_vdev_init(
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD),
NULL);
TEST_ASSERT(ret == 0, "Failed to create "
"instance %u of pmd : %s", i,
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD));
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
}
}
}
}
static int
-test_perf_libcrypto_optimise_cyclecount(struct perf_test_params *pparams)
+test_perf_openssl_optimise_cyclecount(struct perf_test_params *pparams)
{
uint32_t num_to_submit = pparams->total_operations;
struct rte_crypto_op *c_ops[num_to_submit];
}
/* Create Crypto session*/
- sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ sess = test_perf_create_openssl_session(ts_params->dev_id,
pparams->chain, pparams->cipher_algo,
pparams->cipher_key_length, pparams->auth_algo);
TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
}
static struct rte_cryptodev_sym_session *
-test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+test_perf_create_openssl_session(uint8_t dev_id, enum chain_mode chain,
enum rte_crypto_cipher_algorithm cipher_algo,
unsigned int cipher_key_len,
enum rte_crypto_auth_algorithm auth_algo)
}
static int
-test_perf_libcrypto(uint8_t dev_id, uint16_t queue_id,
+test_perf_openssl(uint8_t dev_id, uint16_t queue_id,
struct perf_test_params *pparams)
{
uint16_t i, k, l, m;
}
/* Create Crypto session*/
- sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ sess = test_perf_create_openssl_session(ts_params->dev_id,
pparams->chain, pparams->cipher_algo,
pparams->cipher_key_length, pparams->auth_algo);
TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
}
static int
-test_perf_libcrypto_vary_pkt_size(void)
+test_perf_openssl_vary_pkt_size(void)
{
unsigned int total_operations = 10000;
unsigned int burst_size = { 64 };
"EmptyPolls\n");
for (j = 0; j < RTE_DIM(buf_lengths); j++) {
params_set[i].buf_size = buf_lengths[j];
- test_perf_libcrypto(testsuite_params.dev_id, 0,
+ test_perf_openssl(testsuite_params.dev_id, 0,
¶ms_set[i]);
}
}
}
static int
-test_perf_libcrypto_vary_burst_size(void)
+test_perf_openssl_vary_burst_size(void)
{
unsigned int total_operations = 4096;
uint16_t buf_lengths[] = { 40 };
for (j = 0; j < RTE_DIM(buf_lengths); j++) {
params_set[i].buf_size = buf_lengths[j];
- test_perf_libcrypto_optimise_cyclecount(¶ms_set[i]);
+ test_perf_openssl_optimise_cyclecount(¶ms_set[i]);
}
}
}
};
-static struct unit_test_suite cryptodev_libcrypto_testsuite = {
- .suite_name = "Crypto Device LIBCRYPTO Unit Test Suite",
+static struct unit_test_suite cryptodev_openssl_testsuite = {
+ .suite_name = "Crypto Device OPENSSL Unit Test Suite",
.setup = testsuite_setup,
.teardown = testsuite_teardown,
.unit_test_cases = {
TEST_CASE_ST(ut_setup, ut_teardown,
- test_perf_libcrypto_vary_pkt_size),
+ test_perf_openssl_vary_pkt_size),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_perf_libcrypto_vary_burst_size),
+ test_perf_openssl_vary_burst_size),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
}
static int
-perftest_libcrypto_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
+perftest_openssl_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
{
- gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+ gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_OPENSSL_PMD;
- return unit_test_suite_runner(&cryptodev_libcrypto_testsuite);
+ return unit_test_suite_runner(&cryptodev_openssl_testsuite);
}
static int
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_perftest, perftest_sw_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_snow3g_perftest, perftest_qat_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_perftest, perftest_aesni_gcm_cryptodev);
-REGISTER_TEST_COMMAND(cryptodev_libcrypto_perftest,
- perftest_libcrypto_cryptodev);
+REGISTER_TEST_COMMAND(cryptodev_openssl_perftest,
+ perftest_openssl_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_continual_perftest,
perftest_qat_continual_cryptodev);
#
# Compile PMD for Software backed device
#
-CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
+CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
#
# Compile PMD for AESNI GCM device
aesni_mb
aesni_gcm
kasumi
- libcrypto
+ openssl
null
snow3g
qat
+++ /dev/null
-.. BSD LICENSE
- Copyright(c) 2016 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-LibCrypto Crypto Poll Mode Driver
-=================================
-
-This code provides the initial implementation of the libcrypto poll mode
-driver. All cryptography operations are using Openssl library crypto API.
-Each algorithm uses EVP interface from openssl API - which is recommended
-by Openssl maintainers.
-
-For more details about openssl library please visit openssl webpage:
-https://www.openssl.org/
-
-Features
---------
-
-LibCrypto PMD has support for:
-
-Supported cipher algorithms:
-* ``RTE_CRYPTO_CIPHER_3DES_CBC``
-* ``RTE_CRYPTO_CIPHER_AES_CBC``
-* ``RTE_CRYPTO_CIPHER_AES_CTR``
-* ``RTE_CRYPTO_CIPHER_3DES_CTR``
-* ``RTE_CRYPTO_CIPHER_AES_GCM``
-
-Supported authentication algorithms:
-* ``RTE_CRYPTO_AUTH_AES_GMAC``
-* ``RTE_CRYPTO_AUTH_MD5``
-* ``RTE_CRYPTO_AUTH_SHA1``
-* ``RTE_CRYPTO_AUTH_SHA224``
-* ``RTE_CRYPTO_AUTH_SHA256``
-* ``RTE_CRYPTO_AUTH_SHA384``
-* ``RTE_CRYPTO_AUTH_SHA512``
-* ``RTE_CRYPTO_AUTH_MD5_HMAC``
-* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
-* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
-* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
-* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
-* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
-
-
-Installation
-------------
-
-To compile libcrypto PMD, it has to be enabled in the config/common_base file
-and appropriate openssl packages have to be installed in the build environment.
-
-The newest openssl library version is supported:
-* 1.0.2h-fips 3 May 2016.
-Older versions that were also verified:
-* 1.0.1f 6 Jan 2014
-* 1.0.1 14 Mar 2012
-
-For Ubuntu 14.04 LTS these packages have to be installed in the build system:
-sudo apt-get install openssl
-sudo apt-get install libc6-dev-i386 (for i686-native-linuxapp-gcc target)
-
-This code was also verified on Fedora 24.
-This code was NOT yet verified on FreeBSD.
-
-Initialization
---------------
-
-User can use app/test application to check how to use this pmd and to verify
-crypto processing.
-
-Test name is cryptodev_libcrypto_autotest.
-For performance test cryptodev_libcrypto_perftest can be used.
-
-To verify real traffic l2fwd-crypto example can be used with this command:
-
-.. code-block:: console
-
-sudo ./build/l2fwd-crypto -c 0x3 -n 4 --vdev "cryptodev_libcrypto_pmd"
---vdev "cryptodev_libcrypto_pmd"-- -p 0x3 --chain CIPHER_HASH
---cipher_op ENCRYPT --cipher_algo AES_CBC
---cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
---iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
---auth_op GENERATE --auth_algo SHA1_HMAC
---auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
-:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
-:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
-
-Limitations
------------
-
-* Maximum number of sessions is 2048.
-* Chained mbufs are not supported.
-* Hash only is not supported for GCM and GMAC.
-* Cipher only is not supported for GCM and GMAC.
--- /dev/null
+.. BSD LICENSE
+ Copyright(c) 2016 Intel Corporation. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+OpenSSL Crypto Poll Mode Driver
+===============================
+
+This code provides the initial implementation of the openssl poll mode
+driver. All cryptography operations are using Openssl library crypto API.
+Each algorithm uses EVP interface from openssl API - which is recommended
+by Openssl maintainers.
+
+For more details about openssl library please visit openssl webpage:
+https://www.openssl.org/
+
+Features
+--------
+
+OpenSSL PMD has support for:
+
+Supported cipher algorithms:
+* ``RTE_CRYPTO_CIPHER_3DES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_CTR``
+* ``RTE_CRYPTO_CIPHER_3DES_CTR``
+* ``RTE_CRYPTO_CIPHER_AES_GCM``
+
+Supported authentication algorithms:
+* ``RTE_CRYPTO_AUTH_AES_GMAC``
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+
+
+Installation
+------------
+
+To compile openssl PMD, it has to be enabled in the config/common_base file
+and appropriate openssl packages have to be installed in the build environment.
+
+The newest openssl library version is supported:
+* 1.0.2h-fips 3 May 2016.
+Older versions that were also verified:
+* 1.0.1f 6 Jan 2014
+* 1.0.1 14 Mar 2012
+
+For Ubuntu 14.04 LTS these packages have to be installed in the build system:
+sudo apt-get install openssl
+sudo apt-get install libc6-dev-i386 (for i686-native-linuxapp-gcc target)
+
+This code was also verified on Fedora 24.
+This code was NOT yet verified on FreeBSD.
+
+Initialization
+--------------
+
+User can use app/test application to check how to use this pmd and to verify
+crypto processing.
+
+Test name is cryptodev_openssl_autotest.
+For performance test cryptodev_openssl_perftest can be used.
+
+To verify real traffic l2fwd-crypto example can be used with this command:
+
+.. code-block:: console
+
+sudo ./build/l2fwd-crypto -c 0x3 -n 4 --vdev "crypto_openssl"
+--vdev "crypto_openssl"-- -p 0x3 --chain CIPHER_HASH
+--cipher_op ENCRYPT --cipher_algo AES_CBC
+--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
+--iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
+--auth_op GENERATE --auth_algo SHA1_HMAC
+--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+
+Limitations
+-----------
+
+* Maximum number of sessions is 2048.
+* Chained mbufs are not supported.
+* Hash only is not supported for GCM and GMAC.
+* Cipher only is not supported for GCM and GMAC.
* C3XXX device
* C62XX device
-* **Added libcrypto PMD.**
+* **Added openssl PMD.**
A new crypto PMD has been added, which provides several ciphering and hashing.
All cryptography operations are using Openssl library crypto API.
DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += aesni_gcm
DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += aesni_mb
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += libcrypto
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += openssl
DIRS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat
DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
+++ /dev/null
-# BSD LICENSE
-#
-# Copyright(c) 2016 Intel Corporation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_pmd_libcrypto.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-
-# library version
-LIBABIVER := 1
-
-# versioning export map
-EXPORT_MAP := rte_pmd_libcrypto_version.map
-
-# external library dependencies
-LDLIBS += -lcrypto
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd_ops.c
-
-# library dependencies
-DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_eal
-DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mbuf
-DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mempool
-DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_ring
-DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_cryptodev
-
-include $(RTE_SDK)/mk/rte.lib.mk
+++ /dev/null
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <rte_common.h>
-#include <rte_hexdump.h>
-#include <rte_cryptodev.h>
-#include <rte_cryptodev_pmd.h>
-#include <rte_vdev.h>
-#include <rte_malloc.h>
-#include <rte_cpuflags.h>
-
-#include <openssl/evp.h>
-
-#include "rte_libcrypto_pmd_private.h"
-
-static int cryptodev_libcrypto_remove(const char *name);
-
-/*----------------------------------------------------------------------------*/
-
-/**
- * Global static parameter used to create a unique name for each
- * LIBCRYPTO crypto device.
- */
-static unsigned int unique_name_id;
-
-static inline int
-create_unique_device_name(char *name, size_t size)
-{
- int ret;
-
- if (name == NULL)
- return -EINVAL;
-
- ret = snprintf(name, size, "%s_%u",
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
- unique_name_id++);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-/**
- * Increment counter by 1
- * Counter is 64 bit array, big-endian
- */
-static void
-ctr_inc(uint8_t *ctr)
-{
- uint64_t *ctr64 = (uint64_t *)ctr;
-
- *ctr64 = __builtin_bswap64(*ctr64);
- (*ctr64)++;
- *ctr64 = __builtin_bswap64(*ctr64);
-}
-
-/*
- *------------------------------------------------------------------------------
- * Session Prepare
- *------------------------------------------------------------------------------
- */
-
-/** Get xform chain order */
-static enum libcrypto_chain_order
-libcrypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
-{
- enum libcrypto_chain_order res = LIBCRYPTO_CHAIN_NOT_SUPPORTED;
-
- if (xform != NULL) {
- if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
- if (xform->next == NULL)
- res = LIBCRYPTO_CHAIN_ONLY_AUTH;
- else if (xform->next->type ==
- RTE_CRYPTO_SYM_XFORM_CIPHER)
- res = LIBCRYPTO_CHAIN_AUTH_CIPHER;
- }
- if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
- if (xform->next == NULL)
- res = LIBCRYPTO_CHAIN_ONLY_CIPHER;
- else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
- res = LIBCRYPTO_CHAIN_CIPHER_AUTH;
- }
- }
-
- return res;
-}
-
-/** Get session cipher key from input cipher key */
-static void
-get_cipher_key(uint8_t *input_key, int keylen, uint8_t *session_key)
-{
- memcpy(session_key, input_key, keylen);
-}
-
-/** Get key ede 24 bytes standard from input key */
-static int
-get_cipher_key_ede(uint8_t *key, int keylen, uint8_t *key_ede)
-{
- int res = 0;
-
- /* Initialize keys - 24 bytes: [key1-key2-key3] */
- switch (keylen) {
- case 24:
- memcpy(key_ede, key, 24);
- break;
- case 16:
- /* K3 = K1 */
- memcpy(key_ede, key, 16);
- memcpy(key_ede + 16, key, 8);
- break;
- case 8:
- /* K1 = K2 = K3 (DES compatibility) */
- memcpy(key_ede, key, 8);
- memcpy(key_ede + 8, key, 8);
- memcpy(key_ede + 16, key, 8);
- break;
- default:
- LIBCRYPTO_LOG_ERR("Unsupported key size");
- res = -EINVAL;
- }
-
- return res;
-}
-
-/** Get adequate libcrypto function for input cipher algorithm */
-static uint8_t
-get_cipher_algo(enum rte_crypto_cipher_algorithm sess_algo, size_t keylen,
- const EVP_CIPHER **algo)
-{
- int res = 0;
-
- if (algo != NULL) {
- switch (sess_algo) {
- case RTE_CRYPTO_CIPHER_3DES_CBC:
- switch (keylen) {
- case 16:
- *algo = EVP_des_ede_cbc();
- break;
- case 24:
- *algo = EVP_des_ede3_cbc();
- break;
- default:
- res = -EINVAL;
- }
- break;
- case RTE_CRYPTO_CIPHER_3DES_CTR:
- break;
- case RTE_CRYPTO_CIPHER_AES_CBC:
- switch (keylen) {
- case 16:
- *algo = EVP_aes_128_cbc();
- break;
- case 24:
- *algo = EVP_aes_192_cbc();
- break;
- case 32:
- *algo = EVP_aes_256_cbc();
- break;
- default:
- res = -EINVAL;
- }
- break;
- case RTE_CRYPTO_CIPHER_AES_CTR:
- switch (keylen) {
- case 16:
- *algo = EVP_aes_128_ctr();
- break;
- case 24:
- *algo = EVP_aes_192_ctr();
- break;
- case 32:
- *algo = EVP_aes_256_ctr();
- break;
- default:
- res = -EINVAL;
- }
- break;
- case RTE_CRYPTO_CIPHER_AES_GCM:
- switch (keylen) {
- case 16:
- *algo = EVP_aes_128_gcm();
- break;
- case 24:
- *algo = EVP_aes_192_gcm();
- break;
- case 32:
- *algo = EVP_aes_256_gcm();
- break;
- default:
- res = -EINVAL;
- }
- break;
- default:
- res = -EINVAL;
- break;
- }
- } else {
- res = -EINVAL;
- }
-
- return res;
-}
-
-/** Get adequate libcrypto function for input auth algorithm */
-static uint8_t
-get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
- const EVP_MD **algo)
-{
- int res = 0;
-
- if (algo != NULL) {
- switch (sessalgo) {
- case RTE_CRYPTO_AUTH_MD5:
- case RTE_CRYPTO_AUTH_MD5_HMAC:
- *algo = EVP_md5();
- break;
- case RTE_CRYPTO_AUTH_SHA1:
- case RTE_CRYPTO_AUTH_SHA1_HMAC:
- *algo = EVP_sha1();
- break;
- case RTE_CRYPTO_AUTH_SHA224:
- case RTE_CRYPTO_AUTH_SHA224_HMAC:
- *algo = EVP_sha224();
- break;
- case RTE_CRYPTO_AUTH_SHA256:
- case RTE_CRYPTO_AUTH_SHA256_HMAC:
- *algo = EVP_sha256();
- break;
- case RTE_CRYPTO_AUTH_SHA384:
- case RTE_CRYPTO_AUTH_SHA384_HMAC:
- *algo = EVP_sha384();
- break;
- case RTE_CRYPTO_AUTH_SHA512:
- case RTE_CRYPTO_AUTH_SHA512_HMAC:
- *algo = EVP_sha512();
- break;
- default:
- res = -EINVAL;
- break;
- }
- } else {
- res = -EINVAL;
- }
-
- return res;
-}
-
-/** Set session cipher parameters */
-static int
-libcrypto_set_session_cipher_parameters(struct libcrypto_session *sess,
- const struct rte_crypto_sym_xform *xform)
-{
- /* Select cipher direction */
- sess->cipher.direction = xform->cipher.op;
- /* Select cipher key */
- sess->cipher.key.length = xform->cipher.key.length;
-
- /* Select cipher algo */
- switch (xform->cipher.algo) {
- case RTE_CRYPTO_CIPHER_3DES_CBC:
- case RTE_CRYPTO_CIPHER_AES_CBC:
- case RTE_CRYPTO_CIPHER_AES_CTR:
- case RTE_CRYPTO_CIPHER_AES_GCM:
- sess->cipher.mode = LIBCRYPTO_CIPHER_LIB;
- sess->cipher.algo = xform->cipher.algo;
- sess->cipher.ctx = EVP_CIPHER_CTX_new();
-
- if (get_cipher_algo(sess->cipher.algo, sess->cipher.key.length,
- &sess->cipher.evp_algo) != 0)
- return -EINVAL;
-
- get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
- sess->cipher.key.data);
-
- break;
-
- case RTE_CRYPTO_CIPHER_3DES_CTR:
- sess->cipher.mode = LIBCRYPTO_CIPHER_DES3CTR;
- sess->cipher.ctx = EVP_CIPHER_CTX_new();
-
- if (get_cipher_key_ede(xform->cipher.key.data,
- sess->cipher.key.length,
- sess->cipher.key.data) != 0)
- return -EINVAL;
- break;
-
- default:
- sess->cipher.algo = RTE_CRYPTO_CIPHER_NULL;
- return -EINVAL;
- }
-
- return 0;
-}
-
-/* Set session auth parameters */
-static int
-libcrypto_set_session_auth_parameters(struct libcrypto_session *sess,
- const struct rte_crypto_sym_xform *xform)
-{
- /* Select auth generate/verify */
- sess->auth.operation = xform->auth.op;
- sess->auth.algo = xform->auth.algo;
-
- /* Select auth algo */
- switch (xform->auth.algo) {
- case RTE_CRYPTO_AUTH_AES_GMAC:
- case RTE_CRYPTO_AUTH_AES_GCM:
- /* Check additional condition for AES_GMAC/GCM */
- if (sess->cipher.algo != RTE_CRYPTO_CIPHER_AES_GCM)
- return -EINVAL;
- sess->chain_order = LIBCRYPTO_CHAIN_COMBINED;
- break;
-
- case RTE_CRYPTO_AUTH_MD5:
- case RTE_CRYPTO_AUTH_SHA1:
- case RTE_CRYPTO_AUTH_SHA224:
- case RTE_CRYPTO_AUTH_SHA256:
- case RTE_CRYPTO_AUTH_SHA384:
- case RTE_CRYPTO_AUTH_SHA512:
- sess->auth.mode = LIBCRYPTO_AUTH_AS_AUTH;
- if (get_auth_algo(xform->auth.algo,
- &sess->auth.auth.evp_algo) != 0)
- return -EINVAL;
- sess->auth.auth.ctx = EVP_MD_CTX_create();
- break;
-
- case RTE_CRYPTO_AUTH_MD5_HMAC:
- case RTE_CRYPTO_AUTH_SHA1_HMAC:
- case RTE_CRYPTO_AUTH_SHA224_HMAC:
- case RTE_CRYPTO_AUTH_SHA256_HMAC:
- case RTE_CRYPTO_AUTH_SHA384_HMAC:
- case RTE_CRYPTO_AUTH_SHA512_HMAC:
- sess->auth.mode = LIBCRYPTO_AUTH_AS_HMAC;
- sess->auth.hmac.ctx = EVP_MD_CTX_create();
- if (get_auth_algo(xform->auth.algo,
- &sess->auth.hmac.evp_algo) != 0)
- return -EINVAL;
- sess->auth.hmac.pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL,
- xform->auth.key.data, xform->auth.key.length);
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/** Parse crypto xform chain and set private session parameters */
-int
-libcrypto_set_session_parameters(struct libcrypto_session *sess,
- const struct rte_crypto_sym_xform *xform)
-{
- const struct rte_crypto_sym_xform *cipher_xform = NULL;
- const struct rte_crypto_sym_xform *auth_xform = NULL;
-
- sess->chain_order = libcrypto_get_chain_order(xform);
- switch (sess->chain_order) {
- case LIBCRYPTO_CHAIN_ONLY_CIPHER:
- cipher_xform = xform;
- break;
- case LIBCRYPTO_CHAIN_ONLY_AUTH:
- auth_xform = xform;
- break;
- case LIBCRYPTO_CHAIN_CIPHER_AUTH:
- cipher_xform = xform;
- auth_xform = xform->next;
- break;
- case LIBCRYPTO_CHAIN_AUTH_CIPHER:
- auth_xform = xform;
- cipher_xform = xform->next;
- break;
- default:
- return -EINVAL;
- }
-
- /* cipher_xform must be check before auth_xform */
- if (cipher_xform) {
- if (libcrypto_set_session_cipher_parameters(
- sess, cipher_xform)) {
- LIBCRYPTO_LOG_ERR(
- "Invalid/unsupported cipher parameters");
- return -EINVAL;
- }
- }
-
- if (auth_xform) {
- if (libcrypto_set_session_auth_parameters(sess, auth_xform)) {
- LIBCRYPTO_LOG_ERR(
- "Invalid/unsupported auth parameters");
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-/** Reset private session parameters */
-void
-libcrypto_reset_session(struct libcrypto_session *sess)
-{
- EVP_CIPHER_CTX_free(sess->cipher.ctx);
-
- switch (sess->auth.mode) {
- case LIBCRYPTO_AUTH_AS_AUTH:
- EVP_MD_CTX_destroy(sess->auth.auth.ctx);
- break;
- case LIBCRYPTO_AUTH_AS_HMAC:
- EVP_PKEY_free(sess->auth.hmac.pkey);
- EVP_MD_CTX_destroy(sess->auth.hmac.ctx);
- break;
- default:
- break;
- }
-}
-
-/** Provide session for operation */
-static struct libcrypto_session *
-get_session(struct libcrypto_qp *qp, struct rte_crypto_op *op)
-{
- struct libcrypto_session *sess = NULL;
-
- if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_WITH_SESSION) {
- /* get existing session */
- if (likely(op->sym->session != NULL &&
- op->sym->session->dev_type ==
- RTE_CRYPTODEV_LIBCRYPTO_PMD))
- sess = (struct libcrypto_session *)
- op->sym->session->_private;
- } else {
- /* provide internal session */
- void *_sess = NULL;
-
- if (!rte_mempool_get(qp->sess_mp, (void **)&_sess)) {
- sess = (struct libcrypto_session *)
- ((struct rte_cryptodev_sym_session *)_sess)
- ->_private;
-
- if (unlikely(libcrypto_set_session_parameters(
- sess, op->sym->xform) != 0)) {
- rte_mempool_put(qp->sess_mp, _sess);
- sess = NULL;
- } else
- op->sym->session = _sess;
- }
- }
-
- if (sess == NULL)
- op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
-
- return sess;
-}
-
-/*
- *------------------------------------------------------------------------------
- * Process Operations
- *------------------------------------------------------------------------------
- */
-
-/** Process standard libcrypto cipher encryption */
-static int
-process_libcrypto_cipher_encrypt(uint8_t *src, uint8_t *dst,
- uint8_t *iv, uint8_t *key, int srclen,
- EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
-{
- int dstlen, totlen;
-
- if (EVP_EncryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
- goto process_cipher_encrypt_err;
-
- if (EVP_EncryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
- goto process_cipher_encrypt_err;
-
- if (EVP_EncryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
- goto process_cipher_encrypt_err;
-
- return 0;
-
-process_cipher_encrypt_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto cipher encrypt failed");
- return -EINVAL;
-}
-
-/** Process standard libcrypto cipher decryption */
-static int
-process_libcrypto_cipher_decrypt(uint8_t *src, uint8_t *dst,
- uint8_t *iv, uint8_t *key, int srclen,
- EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
-{
- int dstlen, totlen;
-
- if (EVP_DecryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
- goto process_cipher_decrypt_err;
-
- if (EVP_CIPHER_CTX_set_padding(ctx, 0) <= 0)
- goto process_cipher_decrypt_err;
-
- if (EVP_DecryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
- goto process_cipher_decrypt_err;
-
- if (EVP_DecryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
- goto process_cipher_decrypt_err;
-
- return 0;
-
-process_cipher_decrypt_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto cipher decrypt failed");
- return -EINVAL;
-}
-
-/** Process cipher des 3 ctr encryption, decryption algorithm */
-static int
-process_libcrypto_cipher_des3ctr(uint8_t *src, uint8_t *dst,
- uint8_t *iv, uint8_t *key, int srclen, EVP_CIPHER_CTX *ctx)
-{
- uint8_t ebuf[8], ctr[8];
- int unused, n;
-
- /* We use 3DES encryption also for decryption.
- * IV is not important for 3DES ecb
- */
- if (EVP_EncryptInit_ex(ctx, EVP_des_ede3_ecb(), NULL, key, NULL) <= 0)
- goto process_cipher_des3ctr_err;
-
- memcpy(ctr, iv, 8);
- n = 0;
-
- while (n < srclen) {
- if (n % 8 == 0) {
- if (EVP_EncryptUpdate(ctx,
- (unsigned char *)&ebuf, &unused,
- (const unsigned char *)&ctr, 8) <= 0)
- goto process_cipher_des3ctr_err;
- ctr_inc(ctr);
- }
- dst[n] = src[n] ^ ebuf[n % 8];
- n++;
- }
-
- return 0;
-
-process_cipher_des3ctr_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto cipher des 3 ede ctr failed");
- return -EINVAL;
-}
-
-/** Process auth/encription aes-gcm algorithm */
-static int
-process_libcrypto_auth_encryption_gcm(uint8_t *src, int srclen,
- uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
- uint8_t *key, uint8_t *dst, uint8_t *tag,
- EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
-{
- int len = 0, unused = 0;
- uint8_t empty[] = {};
-
- if (EVP_EncryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
- goto process_auth_encryption_gcm_err;
-
- if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
- goto process_auth_encryption_gcm_err;
-
- if (EVP_EncryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
- goto process_auth_encryption_gcm_err;
-
- if (aadlen > 0) {
- if (EVP_EncryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
- goto process_auth_encryption_gcm_err;
-
- /* Workaround open ssl bug in version less then 1.0.1f */
- if (EVP_EncryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
- goto process_auth_encryption_gcm_err;
- }
-
- if (srclen > 0)
- if (EVP_EncryptUpdate(ctx, dst, &len, src, srclen) <= 0)
- goto process_auth_encryption_gcm_err;
-
- if (EVP_EncryptFinal_ex(ctx, dst + len, &len) <= 0)
- goto process_auth_encryption_gcm_err;
-
- if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, 16, tag) <= 0)
- goto process_auth_encryption_gcm_err;
-
- return 0;
-
-process_auth_encryption_gcm_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto auth encryption gcm failed");
- return -EINVAL;
-}
-
-static int
-process_libcrypto_auth_decryption_gcm(uint8_t *src, int srclen,
- uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
- uint8_t *key, uint8_t *dst, uint8_t *tag,
- EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
-{
- int len = 0, unused = 0;
- uint8_t empty[] = {};
-
- if (EVP_DecryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
- goto process_auth_decryption_gcm_err;
-
- if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
- goto process_auth_decryption_gcm_err;
-
- if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_TAG, 16, tag) <= 0)
- goto process_auth_decryption_gcm_err;
-
- if (EVP_DecryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
- goto process_auth_decryption_gcm_err;
-
- if (aadlen > 0) {
- if (EVP_DecryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
- goto process_auth_decryption_gcm_err;
-
- /* Workaround open ssl bug in version less then 1.0.1f */
- if (EVP_DecryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
- goto process_auth_decryption_gcm_err;
- }
-
- if (srclen > 0)
- if (EVP_DecryptUpdate(ctx, dst, &len, src, srclen) <= 0)
- goto process_auth_decryption_gcm_err;
-
- if (EVP_DecryptFinal_ex(ctx, dst + len, &len) <= 0)
- goto process_auth_decryption_gcm_final_err;
-
- return 0;
-
-process_auth_decryption_gcm_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto auth description gcm failed");
- return -EINVAL;
-
-process_auth_decryption_gcm_final_err:
- return -EFAULT;
-}
-
-/** Process standard libcrypto auth algorithms */
-static int
-process_libcrypto_auth(uint8_t *src, uint8_t *dst,
- __rte_unused uint8_t *iv, __rte_unused EVP_PKEY * pkey,
- int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
-{
- size_t dstlen;
-
- if (EVP_DigestInit_ex(ctx, algo, NULL) <= 0)
- goto process_auth_err;
-
- if (EVP_DigestUpdate(ctx, (char *)src, srclen) <= 0)
- goto process_auth_err;
-
- if (EVP_DigestFinal_ex(ctx, dst, (unsigned int *)&dstlen) <= 0)
- goto process_auth_err;
-
- return 0;
-
-process_auth_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
- return -EINVAL;
-}
-
-/** Process standard libcrypto auth algorithms with hmac */
-static int
-process_libcrypto_auth_hmac(uint8_t *src, uint8_t *dst,
- __rte_unused uint8_t *iv, EVP_PKEY *pkey,
- int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
-{
- size_t dstlen;
-
- if (EVP_DigestSignInit(ctx, NULL, algo, NULL, pkey) <= 0)
- goto process_auth_err;
-
- if (EVP_DigestSignUpdate(ctx, (char *)src, srclen) <= 0)
- goto process_auth_err;
-
- if (EVP_DigestSignFinal(ctx, dst, &dstlen) <= 0)
- goto process_auth_err;
-
- return 0;
-
-process_auth_err:
- LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
- return -EINVAL;
-}
-
-/*----------------------------------------------------------------------------*/
-
-/** Process auth/cipher combined operation */
-static void
-process_libcrypto_combined_op
- (struct rte_crypto_op *op, struct libcrypto_session *sess,
- struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
-{
- /* cipher */
- uint8_t *src = NULL, *dst = NULL, *iv, *tag, *aad;
- int srclen, ivlen, aadlen, status = -1;
-
- iv = op->sym->cipher.iv.data;
- ivlen = op->sym->cipher.iv.length;
- aad = op->sym->auth.aad.data;
- aadlen = op->sym->auth.aad.length;
-
- tag = op->sym->auth.digest.data;
- if (tag == NULL)
- tag = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
- op->sym->cipher.data.offset +
- op->sym->cipher.data.length);
-
- if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC)
- srclen = 0;
- else {
- srclen = op->sym->cipher.data.length;
- src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
- op->sym->cipher.data.offset);
- dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
- op->sym->cipher.data.offset);
- }
-
- if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
- status = process_libcrypto_auth_encryption_gcm(
- src, srclen, aad, aadlen, iv, ivlen,
- sess->cipher.key.data, dst, tag,
- sess->cipher.ctx, sess->cipher.evp_algo);
- else
- status = process_libcrypto_auth_decryption_gcm(
- src, srclen, aad, aadlen, iv, ivlen,
- sess->cipher.key.data, dst, tag,
- sess->cipher.ctx, sess->cipher.evp_algo);
-
- if (status != 0) {
- if (status == (-EFAULT) &&
- sess->auth.operation ==
- RTE_CRYPTO_AUTH_OP_VERIFY)
- op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
- else
- op->status = RTE_CRYPTO_OP_STATUS_ERROR;
- }
-}
-
-/** Process cipher operation */
-static void
-process_libcrypto_cipher_op
- (struct rte_crypto_op *op, struct libcrypto_session *sess,
- struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
-{
- uint8_t *src, *dst, *iv;
- int srclen, status;
-
- srclen = op->sym->cipher.data.length;
- src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
- op->sym->cipher.data.offset);
- dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
- op->sym->cipher.data.offset);
-
- iv = op->sym->cipher.iv.data;
-
- if (sess->cipher.mode == LIBCRYPTO_CIPHER_LIB)
- if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
- status = process_libcrypto_cipher_encrypt(src, dst, iv,
- sess->cipher.key.data, srclen,
- sess->cipher.ctx,
- sess->cipher.evp_algo);
- else
- status = process_libcrypto_cipher_decrypt(src, dst, iv,
- sess->cipher.key.data, srclen,
- sess->cipher.ctx,
- sess->cipher.evp_algo);
- else
- status = process_libcrypto_cipher_des3ctr(src, dst, iv,
- sess->cipher.key.data, srclen,
- sess->cipher.ctx);
-
- if (status != 0)
- op->status = RTE_CRYPTO_OP_STATUS_ERROR;
-}
-
-/** Process auth operation */
-static void
-process_libcrypto_auth_op
- (struct rte_crypto_op *op, struct libcrypto_session *sess,
- struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
-{
- uint8_t *src, *dst;
- int srclen, status;
-
- srclen = op->sym->auth.data.length;
- src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
- op->sym->auth.data.offset);
-
- if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY)
- dst = (uint8_t *)rte_pktmbuf_append(mbuf_src,
- op->sym->auth.digest.length);
- else {
- dst = op->sym->auth.digest.data;
- if (dst == NULL)
- dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
- op->sym->auth.data.offset +
- op->sym->auth.data.length);
- }
-
- switch (sess->auth.mode) {
- case LIBCRYPTO_AUTH_AS_AUTH:
- status = process_libcrypto_auth(src, dst,
- NULL, NULL, srclen,
- sess->auth.auth.ctx, sess->auth.auth.evp_algo);
- break;
- case LIBCRYPTO_AUTH_AS_HMAC:
- status = process_libcrypto_auth_hmac(src, dst,
- NULL, sess->auth.hmac.pkey, srclen,
- sess->auth.hmac.ctx, sess->auth.hmac.evp_algo);
- break;
- default:
- status = -1;
- break;
- }
-
- if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
- if (memcmp(dst, op->sym->auth.digest.data,
- op->sym->auth.digest.length) != 0) {
- op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
- }
- /* Trim area used for digest from mbuf. */
- rte_pktmbuf_trim(mbuf_src,
- op->sym->auth.digest.length);
- }
-
- if (status != 0)
- op->status = RTE_CRYPTO_OP_STATUS_ERROR;
-}
-
-/** Process crypto operation for mbuf */
-static int
-process_op(const struct libcrypto_qp *qp, struct rte_crypto_op *op,
- struct libcrypto_session *sess)
-{
- struct rte_mbuf *msrc, *mdst;
- int retval;
-
- msrc = op->sym->m_src;
- mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
-
- op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
-
- switch (sess->chain_order) {
- case LIBCRYPTO_CHAIN_ONLY_CIPHER:
- process_libcrypto_cipher_op(op, sess, msrc, mdst);
- break;
- case LIBCRYPTO_CHAIN_ONLY_AUTH:
- process_libcrypto_auth_op(op, sess, msrc, mdst);
- break;
- case LIBCRYPTO_CHAIN_CIPHER_AUTH:
- process_libcrypto_cipher_op(op, sess, msrc, mdst);
- process_libcrypto_auth_op(op, sess, mdst, mdst);
- break;
- case LIBCRYPTO_CHAIN_AUTH_CIPHER:
- process_libcrypto_auth_op(op, sess, msrc, mdst);
- process_libcrypto_cipher_op(op, sess, msrc, mdst);
- break;
- case LIBCRYPTO_CHAIN_COMBINED:
- process_libcrypto_combined_op(op, sess, msrc, mdst);
- break;
- default:
- op->status = RTE_CRYPTO_OP_STATUS_ERROR;
- break;
- }
-
- /* Free session if a session-less crypto op */
- if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
- libcrypto_reset_session(sess);
- memset(sess, 0, sizeof(struct libcrypto_session));
- rte_mempool_put(qp->sess_mp, op->sym->session);
- op->sym->session = NULL;
- }
-
-
- if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
- op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
-
- if (op->status != RTE_CRYPTO_OP_STATUS_ERROR)
- retval = rte_ring_enqueue(qp->processed_ops, (void *)op);
- else
- retval = -1;
-
- return retval;
-}
-
-/*
- *------------------------------------------------------------------------------
- * PMD Framework
- *------------------------------------------------------------------------------
- */
-
-/** Enqueue burst */
-static uint16_t
-libcrypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
- uint16_t nb_ops)
-{
- struct libcrypto_session *sess;
- struct libcrypto_qp *qp = queue_pair;
- int i, retval;
-
- for (i = 0; i < nb_ops; i++) {
- sess = get_session(qp, ops[i]);
- if (unlikely(sess == NULL))
- goto enqueue_err;
-
- retval = process_op(qp, ops[i], sess);
- if (unlikely(retval < 0))
- goto enqueue_err;
- }
-
- qp->stats.enqueued_count += i;
- return i;
-
-enqueue_err:
- qp->stats.enqueue_err_count++;
- return i;
-}
-
-/** Dequeue burst */
-static uint16_t
-libcrypto_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
- uint16_t nb_ops)
-{
- struct libcrypto_qp *qp = queue_pair;
-
- unsigned int nb_dequeued = 0;
-
- nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
- (void **)ops, nb_ops);
- qp->stats.dequeued_count += nb_dequeued;
-
- return nb_dequeued;
-}
-
-/** Create LIBCRYPTO crypto device */
-static int
-cryptodev_libcrypto_create(const char *name,
- struct rte_crypto_vdev_init_params *init_params)
-{
- struct rte_cryptodev *dev;
- char crypto_dev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
- struct libcrypto_private *internals;
-
- /* create a unique device name */
- if (create_unique_device_name(crypto_dev_name,
- RTE_CRYPTODEV_NAME_MAX_LEN) != 0) {
- LIBCRYPTO_LOG_ERR("failed to create unique cryptodev name");
- return -EINVAL;
- }
-
- dev = rte_cryptodev_pmd_virtual_dev_init(crypto_dev_name,
- sizeof(struct libcrypto_private),
- init_params->socket_id);
- if (dev == NULL) {
- LIBCRYPTO_LOG_ERR("failed to create cryptodev vdev");
- goto init_error;
- }
-
- dev->dev_type = RTE_CRYPTODEV_LIBCRYPTO_PMD;
- dev->dev_ops = rte_libcrypto_pmd_ops;
-
- /* register rx/tx burst functions for data path */
- dev->dequeue_burst = libcrypto_pmd_dequeue_burst;
- dev->enqueue_burst = libcrypto_pmd_enqueue_burst;
-
- dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
- RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
- RTE_CRYPTODEV_FF_CPU_AESNI;
-
- /* Set vector instructions mode supported */
- internals = dev->data->dev_private;
-
- internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
-
- return 0;
-
-init_error:
- LIBCRYPTO_LOG_ERR("driver %s: cryptodev_libcrypto_create failed", name);
-
- cryptodev_libcrypto_remove(crypto_dev_name);
- return -EFAULT;
-}
-
-/** Initialise LIBCRYPTO crypto device */
-static int
-cryptodev_libcrypto_probe(const char *name,
- const char *input_args)
-{
- struct rte_crypto_vdev_init_params init_params = {
- RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS,
- rte_socket_id()
- };
-
- rte_cryptodev_parse_vdev_init_params(&init_params, input_args);
-
- RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
- init_params.socket_id);
- RTE_LOG(INFO, PMD, " Max number of queue pairs = %d\n",
- init_params.max_nb_queue_pairs);
- RTE_LOG(INFO, PMD, " Max number of sessions = %d\n",
- init_params.max_nb_sessions);
-
- return cryptodev_libcrypto_create(name, &init_params);
-}
-
-/** Uninitialise LIBCRYPTO crypto device */
-static int
-cryptodev_libcrypto_remove(const char *name)
-{
- if (name == NULL)
- return -EINVAL;
-
- RTE_LOG(INFO, PMD,
- "Closing LIBCRYPTO crypto device %s on numa socket %u\n",
- name, rte_socket_id());
-
- return 0;
-}
-
-static struct rte_vdev_driver cryptodev_libcrypto_pmd_drv = {
- .probe = cryptodev_libcrypto_probe,
- .remove = cryptodev_libcrypto_remove
-};
-
-RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_LIBCRYPTO_PMD,
- cryptodev_libcrypto_pmd_drv);
-RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_LIBCRYPTO_PMD,
- "max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
- "socket_id=<int>");
+++ /dev/null
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-
-#include <rte_common.h>
-#include <rte_malloc.h>
-#include <rte_cryptodev_pmd.h>
-
-#include "rte_libcrypto_pmd_private.h"
-
-
-static const struct rte_cryptodev_capabilities libcrypto_pmd_capabilities[] = {
- { /* MD5 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* MD5 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_MD5,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA1 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 20,
- .max = 20,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA1 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA1,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 20,
- .max = 20,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA224 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 28,
- .max = 28,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA224 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA224,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 28,
- .max = 28,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA256 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 32,
- .max = 32,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA256 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA256,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 32,
- .max = 32,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA384 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
- .block_size = 128,
- .key_size = {
- .min = 128,
- .max = 128,
- .increment = 0
- },
- .digest_size = {
- .min = 48,
- .max = 48,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA384 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA384,
- .block_size = 128,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 48,
- .max = 48,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA512 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
- .block_size = 128,
- .key_size = {
- .min = 128,
- .max = 128,
- .increment = 0
- },
- .digest_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA512 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA512,
- .block_size = 128,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* AES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES GCM (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_GCM,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = {
- .min = 8,
- .max = 12,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* AES GCM (CIPHER) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_GCM,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .iv_size = {
- .min = 12,
- .max = 16,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* AES GMAC (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_GMAC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = {
- .min = 8,
- .max = 65532,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* 3DES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 24,
- .increment = 8
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* 3DES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 24,
- .increment = 8
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
-
- RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
-};
-
-
-/** Configure device */
-static int
-libcrypto_pmd_config(__rte_unused struct rte_cryptodev *dev)
-{
- return 0;
-}
-
-/** Start device */
-static int
-libcrypto_pmd_start(__rte_unused struct rte_cryptodev *dev)
-{
- return 0;
-}
-
-/** Stop device */
-static void
-libcrypto_pmd_stop(__rte_unused struct rte_cryptodev *dev)
-{
-}
-
-/** Close device */
-static int
-libcrypto_pmd_close(__rte_unused struct rte_cryptodev *dev)
-{
- return 0;
-}
-
-
-/** Get device statistics */
-static void
-libcrypto_pmd_stats_get(struct rte_cryptodev *dev,
- struct rte_cryptodev_stats *stats)
-{
- int qp_id;
-
- for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
- struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
-
- stats->enqueued_count += qp->stats.enqueued_count;
- stats->dequeued_count += qp->stats.dequeued_count;
-
- stats->enqueue_err_count += qp->stats.enqueue_err_count;
- stats->dequeue_err_count += qp->stats.dequeue_err_count;
- }
-}
-
-/** Reset device statistics */
-static void
-libcrypto_pmd_stats_reset(struct rte_cryptodev *dev)
-{
- int qp_id;
-
- for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
- struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
-
- memset(&qp->stats, 0, sizeof(qp->stats));
- }
-}
-
-
-/** Get device info */
-static void
-libcrypto_pmd_info_get(struct rte_cryptodev *dev,
- struct rte_cryptodev_info *dev_info)
-{
- struct libcrypto_private *internals = dev->data->dev_private;
-
- if (dev_info != NULL) {
- dev_info->dev_type = dev->dev_type;
- dev_info->feature_flags = dev->feature_flags;
- dev_info->capabilities = libcrypto_pmd_capabilities;
- dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
- }
-}
-
-/** Release queue pair */
-static int
-libcrypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
-{
- if (dev->data->queue_pairs[qp_id] != NULL) {
- rte_free(dev->data->queue_pairs[qp_id]);
- dev->data->queue_pairs[qp_id] = NULL;
- }
- return 0;
-}
-
-/** set a unique name for the queue pair based on it's name, dev_id and qp_id */
-static int
-libcrypto_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
- struct libcrypto_qp *qp)
-{
- unsigned int n = snprintf(qp->name, sizeof(qp->name),
- "libcrypto_pmd_%u_qp_%u",
- dev->data->dev_id, qp->id);
-
- if (n > sizeof(qp->name))
- return -1;
-
- return 0;
-}
-
-
-/** Create a ring to place processed operations on */
-static struct rte_ring *
-libcrypto_pmd_qp_create_processed_ops_ring(struct libcrypto_qp *qp,
- unsigned int ring_size, int socket_id)
-{
- struct rte_ring *r;
-
- r = rte_ring_lookup(qp->name);
- if (r) {
- if (r->prod.size >= ring_size) {
- LIBCRYPTO_LOG_INFO(
- "Reusing existing ring %s for processed ops",
- qp->name);
- return r;
- }
-
- LIBCRYPTO_LOG_ERR(
- "Unable to reuse existing ring %s for processed ops",
- qp->name);
- return NULL;
- }
-
- return rte_ring_create(qp->name, ring_size, socket_id,
- RING_F_SP_ENQ | RING_F_SC_DEQ);
-}
-
-
-/** Setup a queue pair */
-static int
-libcrypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
- const struct rte_cryptodev_qp_conf *qp_conf,
- int socket_id)
-{
- struct libcrypto_qp *qp = NULL;
-
- /* Free memory prior to re-allocation if needed. */
- if (dev->data->queue_pairs[qp_id] != NULL)
- libcrypto_pmd_qp_release(dev, qp_id);
-
- /* Allocate the queue pair data structure. */
- qp = rte_zmalloc_socket("LIBCRYPTO PMD Queue Pair", sizeof(*qp),
- RTE_CACHE_LINE_SIZE, socket_id);
- if (qp == NULL)
- return -ENOMEM;
-
- qp->id = qp_id;
- dev->data->queue_pairs[qp_id] = qp;
-
- if (libcrypto_pmd_qp_set_unique_name(dev, qp))
- goto qp_setup_cleanup;
-
- qp->processed_ops = libcrypto_pmd_qp_create_processed_ops_ring(qp,
- qp_conf->nb_descriptors, socket_id);
- if (qp->processed_ops == NULL)
- goto qp_setup_cleanup;
-
- qp->sess_mp = dev->data->session_pool;
-
- memset(&qp->stats, 0, sizeof(qp->stats));
-
- return 0;
-
-qp_setup_cleanup:
- if (qp)
- rte_free(qp);
-
- return -1;
-}
-
-/** Start queue pair */
-static int
-libcrypto_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
- __rte_unused uint16_t queue_pair_id)
-{
- return -ENOTSUP;
-}
-
-/** Stop queue pair */
-static int
-libcrypto_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
- __rte_unused uint16_t queue_pair_id)
-{
- return -ENOTSUP;
-}
-
-/** Return the number of allocated queue pairs */
-static uint32_t
-libcrypto_pmd_qp_count(struct rte_cryptodev *dev)
-{
- return dev->data->nb_queue_pairs;
-}
-
-/** Returns the size of the session structure */
-static unsigned
-libcrypto_pmd_session_get_size(struct rte_cryptodev *dev __rte_unused)
-{
- return sizeof(struct libcrypto_session);
-}
-
-/** Configure the session from a crypto xform chain */
-static void *
-libcrypto_pmd_session_configure(struct rte_cryptodev *dev __rte_unused,
- struct rte_crypto_sym_xform *xform, void *sess)
-{
- if (unlikely(sess == NULL)) {
- LIBCRYPTO_LOG_ERR("invalid session struct");
- return NULL;
- }
-
- if (libcrypto_set_session_parameters(
- sess, xform) != 0) {
- LIBCRYPTO_LOG_ERR("failed configure session parameters");
- return NULL;
- }
-
- return sess;
-}
-
-
-/** Clear the memory of session so it doesn't leave key material behind */
-static void
-libcrypto_pmd_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
-{
- /*
- * Current just resetting the whole data structure, need to investigate
- * whether a more selective reset of key would be more performant
- */
- if (sess) {
- libcrypto_reset_session(sess);
- memset(sess, 0, sizeof(struct libcrypto_session));
- }
-}
-
-struct rte_cryptodev_ops libcrypto_pmd_ops = {
- .dev_configure = libcrypto_pmd_config,
- .dev_start = libcrypto_pmd_start,
- .dev_stop = libcrypto_pmd_stop,
- .dev_close = libcrypto_pmd_close,
-
- .stats_get = libcrypto_pmd_stats_get,
- .stats_reset = libcrypto_pmd_stats_reset,
-
- .dev_infos_get = libcrypto_pmd_info_get,
-
- .queue_pair_setup = libcrypto_pmd_qp_setup,
- .queue_pair_release = libcrypto_pmd_qp_release,
- .queue_pair_start = libcrypto_pmd_qp_start,
- .queue_pair_stop = libcrypto_pmd_qp_stop,
- .queue_pair_count = libcrypto_pmd_qp_count,
-
- .session_get_size = libcrypto_pmd_session_get_size,
- .session_configure = libcrypto_pmd_session_configure,
- .session_clear = libcrypto_pmd_session_clear
-};
-
-struct rte_cryptodev_ops *rte_libcrypto_pmd_ops = &libcrypto_pmd_ops;
+++ /dev/null
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LIBCRYPTO_PMD_PRIVATE_H_
-#define _LIBCRYPTO_PMD_PRIVATE_H_
-
-#include <openssl/evp.h>
-#include <openssl/des.h>
-
-
-#define LIBCRYPTO_LOG_ERR(fmt, args...) \
- RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
- __func__, __LINE__, ## args)
-
-#ifdef RTE_LIBRTE_LIBCRYPTO_DEBUG
-#define LIBCRYPTO_LOG_INFO(fmt, args...) \
- RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
- __func__, __LINE__, ## args)
-
-#define LIBCRYPTO_LOG_DBG(fmt, args...) \
- RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
- __func__, __LINE__, ## args)
-#else
-#define LIBCRYPTO_LOG_INFO(fmt, args...)
-#define LIBCRYPTO_LOG_DBG(fmt, args...)
-#endif
-
-
-/** LIBCRYPTO operation order mode enumerator */
-enum libcrypto_chain_order {
- LIBCRYPTO_CHAIN_ONLY_CIPHER,
- LIBCRYPTO_CHAIN_ONLY_AUTH,
- LIBCRYPTO_CHAIN_CIPHER_AUTH,
- LIBCRYPTO_CHAIN_AUTH_CIPHER,
- LIBCRYPTO_CHAIN_COMBINED,
- LIBCRYPTO_CHAIN_NOT_SUPPORTED
-};
-
-/** LIBCRYPTO cipher mode enumerator */
-enum libcrypto_cipher_mode {
- LIBCRYPTO_CIPHER_LIB,
- LIBCRYPTO_CIPHER_DES3CTR,
-};
-
-/** LIBCRYPTO auth mode enumerator */
-enum libcrypto_auth_mode {
- LIBCRYPTO_AUTH_AS_AUTH,
- LIBCRYPTO_AUTH_AS_HMAC,
-};
-
-/** private data structure for each LIBCRYPTO crypto device */
-struct libcrypto_private {
- unsigned int max_nb_qpairs;
- /**< Max number of queue pairs */
- unsigned int max_nb_sessions;
- /**< Max number of sessions */
-};
-
-/** LIBCRYPTO crypto queue pair */
-struct libcrypto_qp {
- uint16_t id;
- /**< Queue Pair Identifier */
- char name[RTE_CRYPTODEV_NAME_LEN];
- /**< Unique Queue Pair Name */
- struct rte_ring *processed_ops;
- /**< Ring for placing process packets */
- struct rte_mempool *sess_mp;
- /**< Session Mempool */
- struct rte_cryptodev_stats stats;
- /**< Queue pair statistics */
-} __rte_cache_aligned;
-
-/** LIBCRYPTO crypto private session structure */
-struct libcrypto_session {
- enum libcrypto_chain_order chain_order;
- /**< chain order mode */
-
- /** Cipher Parameters */
- struct {
- enum rte_crypto_cipher_operation direction;
- /**< cipher operation direction */
- enum libcrypto_cipher_mode mode;
- /**< cipher operation mode */
- enum rte_crypto_cipher_algorithm algo;
- /**< cipher algorithm */
-
- struct {
- uint8_t data[32];
- /**< key data */
- size_t length;
- /**< key length in bytes */
- } key;
-
- const EVP_CIPHER *evp_algo;
- /**< pointer to EVP algorithm function */
- EVP_CIPHER_CTX *ctx;
- /**< pointer to EVP context structure */
- } cipher;
-
- /** Authentication Parameters */
- struct {
- enum rte_crypto_auth_operation operation;
- /**< auth operation generate or verify */
- enum libcrypto_auth_mode mode;
- /**< auth operation mode */
- enum rte_crypto_auth_algorithm algo;
- /**< cipher algorithm */
-
- union {
- struct {
- const EVP_MD *evp_algo;
- /**< pointer to EVP algorithm function */
- EVP_MD_CTX *ctx;
- /**< pointer to EVP context structure */
- } auth;
-
- struct {
- EVP_PKEY *pkey;
- /**< pointer to EVP key */
- const EVP_MD *evp_algo;
- /**< pointer to EVP algorithm function */
- EVP_MD_CTX *ctx;
- /**< pointer to EVP context structure */
- } hmac;
- };
- } auth;
-
-} __rte_cache_aligned;
-
-/** Set and validate LIBCRYPTO crypto session parameters */
-extern int
-libcrypto_set_session_parameters(struct libcrypto_session *sess,
- const struct rte_crypto_sym_xform *xform);
-
-/** Reset LIBCRYPTO crypto session parameters */
-extern void
-libcrypto_reset_session(struct libcrypto_session *sess);
-
-/** device specific operations function pointer structure */
-extern struct rte_cryptodev_ops *rte_libcrypto_pmd_ops;
-
-#endif /* _LIBCRYPTO_PMD_PRIVATE_H_ */
+++ /dev/null
-DPDK_16.11 {
- local: *;
-};
--- /dev/null
+# BSD LICENSE
+#
+# Copyright(c) 2016 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_pmd_openssl.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_openssl_version.map
+
+# external library dependencies
+LDLIBS += -lcrypto
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += rte_openssl_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += rte_openssl_pmd_ops.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += lib/librte_ring
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += lib/librte_cryptodev
+
+include $(RTE_SDK)/mk/rte.lib.mk
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_vdev.h>
+#include <rte_malloc.h>
+#include <rte_cpuflags.h>
+
+#include <openssl/evp.h>
+
+#include "rte_openssl_pmd_private.h"
+
+static int cryptodev_openssl_remove(const char *name);
+
+/*----------------------------------------------------------------------------*/
+
+/**
+ * Global static parameter used to create a unique name for each
+ * OPENSSL crypto device.
+ */
+static unsigned int unique_name_id;
+
+static inline int
+create_unique_device_name(char *name, size_t size)
+{
+ int ret;
+
+ if (name == NULL)
+ return -EINVAL;
+
+ ret = snprintf(name, size, "%s_%u",
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD),
+ unique_name_id++);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Increment counter by 1
+ * Counter is 64 bit array, big-endian
+ */
+static void
+ctr_inc(uint8_t *ctr)
+{
+ uint64_t *ctr64 = (uint64_t *)ctr;
+
+ *ctr64 = __builtin_bswap64(*ctr64);
+ (*ctr64)++;
+ *ctr64 = __builtin_bswap64(*ctr64);
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Session Prepare
+ *------------------------------------------------------------------------------
+ */
+
+/** Get xform chain order */
+static enum openssl_chain_order
+openssl_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+ enum openssl_chain_order res = OPENSSL_CHAIN_NOT_SUPPORTED;
+
+ if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ if (xform->next == NULL)
+ res = OPENSSL_CHAIN_ONLY_AUTH;
+ else if (xform->next->type ==
+ RTE_CRYPTO_SYM_XFORM_CIPHER)
+ res = OPENSSL_CHAIN_AUTH_CIPHER;
+ }
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ if (xform->next == NULL)
+ res = OPENSSL_CHAIN_ONLY_CIPHER;
+ else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ res = OPENSSL_CHAIN_CIPHER_AUTH;
+ }
+ }
+
+ return res;
+}
+
+/** Get session cipher key from input cipher key */
+static void
+get_cipher_key(uint8_t *input_key, int keylen, uint8_t *session_key)
+{
+ memcpy(session_key, input_key, keylen);
+}
+
+/** Get key ede 24 bytes standard from input key */
+static int
+get_cipher_key_ede(uint8_t *key, int keylen, uint8_t *key_ede)
+{
+ int res = 0;
+
+ /* Initialize keys - 24 bytes: [key1-key2-key3] */
+ switch (keylen) {
+ case 24:
+ memcpy(key_ede, key, 24);
+ break;
+ case 16:
+ /* K3 = K1 */
+ memcpy(key_ede, key, 16);
+ memcpy(key_ede + 16, key, 8);
+ break;
+ case 8:
+ /* K1 = K2 = K3 (DES compatibility) */
+ memcpy(key_ede, key, 8);
+ memcpy(key_ede + 8, key, 8);
+ memcpy(key_ede + 16, key, 8);
+ break;
+ default:
+ OPENSSL_LOG_ERR("Unsupported key size");
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Get adequate openssl function for input cipher algorithm */
+static uint8_t
+get_cipher_algo(enum rte_crypto_cipher_algorithm sess_algo, size_t keylen,
+ const EVP_CIPHER **algo)
+{
+ int res = 0;
+
+ if (algo != NULL) {
+ switch (sess_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_des_ede_cbc();
+ break;
+ case 24:
+ *algo = EVP_des_ede3_cbc();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_cbc();
+ break;
+ case 24:
+ *algo = EVP_aes_192_cbc();
+ break;
+ case 32:
+ *algo = EVP_aes_256_cbc();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_ctr();
+ break;
+ case 24:
+ *algo = EVP_aes_192_ctr();
+ break;
+ case 32:
+ *algo = EVP_aes_256_ctr();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_gcm();
+ break;
+ case 24:
+ *algo = EVP_aes_192_gcm();
+ break;
+ case 32:
+ *algo = EVP_aes_256_gcm();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+ } else {
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Get adequate openssl function for input auth algorithm */
+static uint8_t
+get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
+ const EVP_MD **algo)
+{
+ int res = 0;
+
+ if (algo != NULL) {
+ switch (sessalgo) {
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ *algo = EVP_md5();
+ break;
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ *algo = EVP_sha1();
+ break;
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ *algo = EVP_sha224();
+ break;
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ *algo = EVP_sha256();
+ break;
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ *algo = EVP_sha384();
+ break;
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ *algo = EVP_sha512();
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+ } else {
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Set session cipher parameters */
+static int
+openssl_set_session_cipher_parameters(struct openssl_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ /* Select cipher direction */
+ sess->cipher.direction = xform->cipher.op;
+ /* Select cipher key */
+ sess->cipher.key.length = xform->cipher.key.length;
+
+ /* Select cipher algo */
+ switch (xform->cipher.algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ sess->cipher.mode = OPENSSL_CIPHER_LIB;
+ sess->cipher.algo = xform->cipher.algo;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+ if (get_cipher_algo(sess->cipher.algo, sess->cipher.key.length,
+ &sess->cipher.evp_algo) != 0)
+ return -EINVAL;
+
+ get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
+ sess->cipher.key.data);
+
+ break;
+
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ sess->cipher.mode = OPENSSL_CIPHER_DES3CTR;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+ if (get_cipher_key_ede(xform->cipher.key.data,
+ sess->cipher.key.length,
+ sess->cipher.key.data) != 0)
+ return -EINVAL;
+ break;
+
+ default:
+ sess->cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Set session auth parameters */
+static int
+openssl_set_session_auth_parameters(struct openssl_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ /* Select auth generate/verify */
+ sess->auth.operation = xform->auth.op;
+ sess->auth.algo = xform->auth.algo;
+
+ /* Select auth algo */
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_AES_GMAC:
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ /* Check additional condition for AES_GMAC/GCM */
+ if (sess->cipher.algo != RTE_CRYPTO_CIPHER_AES_GCM)
+ return -EINVAL;
+ sess->chain_order = OPENSSL_CHAIN_COMBINED;
+ break;
+
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA512:
+ sess->auth.mode = OPENSSL_AUTH_AS_AUTH;
+ if (get_auth_algo(xform->auth.algo,
+ &sess->auth.auth.evp_algo) != 0)
+ return -EINVAL;
+ sess->auth.auth.ctx = EVP_MD_CTX_create();
+ break;
+
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
+ sess->auth.hmac.ctx = EVP_MD_CTX_create();
+ if (get_auth_algo(xform->auth.algo,
+ &sess->auth.hmac.evp_algo) != 0)
+ return -EINVAL;
+ sess->auth.hmac.pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL,
+ xform->auth.key.data, xform->auth.key.length);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/** Parse crypto xform chain and set private session parameters */
+int
+openssl_set_session_parameters(struct openssl_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ const struct rte_crypto_sym_xform *cipher_xform = NULL;
+ const struct rte_crypto_sym_xform *auth_xform = NULL;
+
+ sess->chain_order = openssl_get_chain_order(xform);
+ switch (sess->chain_order) {
+ case OPENSSL_CHAIN_ONLY_CIPHER:
+ cipher_xform = xform;
+ break;
+ case OPENSSL_CHAIN_ONLY_AUTH:
+ auth_xform = xform;
+ break;
+ case OPENSSL_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case OPENSSL_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* cipher_xform must be check before auth_xform */
+ if (cipher_xform) {
+ if (openssl_set_session_cipher_parameters(
+ sess, cipher_xform)) {
+ OPENSSL_LOG_ERR(
+ "Invalid/unsupported cipher parameters");
+ return -EINVAL;
+ }
+ }
+
+ if (auth_xform) {
+ if (openssl_set_session_auth_parameters(sess, auth_xform)) {
+ OPENSSL_LOG_ERR(
+ "Invalid/unsupported auth parameters");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/** Reset private session parameters */
+void
+openssl_reset_session(struct openssl_session *sess)
+{
+ EVP_CIPHER_CTX_free(sess->cipher.ctx);
+
+ switch (sess->auth.mode) {
+ case OPENSSL_AUTH_AS_AUTH:
+ EVP_MD_CTX_destroy(sess->auth.auth.ctx);
+ break;
+ case OPENSSL_AUTH_AS_HMAC:
+ EVP_PKEY_free(sess->auth.hmac.pkey);
+ EVP_MD_CTX_destroy(sess->auth.hmac.ctx);
+ break;
+ default:
+ break;
+ }
+}
+
+/** Provide session for operation */
+static struct openssl_session *
+get_session(struct openssl_qp *qp, struct rte_crypto_op *op)
+{
+ struct openssl_session *sess = NULL;
+
+ if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_WITH_SESSION) {
+ /* get existing session */
+ if (likely(op->sym->session != NULL &&
+ op->sym->session->dev_type ==
+ RTE_CRYPTODEV_OPENSSL_PMD))
+ sess = (struct openssl_session *)
+ op->sym->session->_private;
+ } else {
+ /* provide internal session */
+ void *_sess = NULL;
+
+ if (!rte_mempool_get(qp->sess_mp, (void **)&_sess)) {
+ sess = (struct openssl_session *)
+ ((struct rte_cryptodev_sym_session *)_sess)
+ ->_private;
+
+ if (unlikely(openssl_set_session_parameters(
+ sess, op->sym->xform) != 0)) {
+ rte_mempool_put(qp->sess_mp, _sess);
+ sess = NULL;
+ } else
+ op->sym->session = _sess;
+ }
+ }
+
+ if (sess == NULL)
+ op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
+
+ return sess;
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Process Operations
+ *------------------------------------------------------------------------------
+ */
+
+/** Process standard openssl cipher encryption */
+static int
+process_openssl_cipher_encrypt(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int dstlen, totlen;
+
+ if (EVP_EncryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+ goto process_cipher_encrypt_err;
+
+ if (EVP_EncryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+ goto process_cipher_encrypt_err;
+
+ if (EVP_EncryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+ goto process_cipher_encrypt_err;
+
+ return 0;
+
+process_cipher_encrypt_err:
+ OPENSSL_LOG_ERR("Process openssl cipher encrypt failed");
+ return -EINVAL;
+}
+
+/** Process standard openssl cipher decryption */
+static int
+process_openssl_cipher_decrypt(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int dstlen, totlen;
+
+ if (EVP_DecryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_CIPHER_CTX_set_padding(ctx, 0) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_DecryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_DecryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+ goto process_cipher_decrypt_err;
+
+ return 0;
+
+process_cipher_decrypt_err:
+ OPENSSL_LOG_ERR("Process openssl cipher decrypt failed");
+ return -EINVAL;
+}
+
+/** Process cipher des 3 ctr encryption, decryption algorithm */
+static int
+process_openssl_cipher_des3ctr(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen, EVP_CIPHER_CTX *ctx)
+{
+ uint8_t ebuf[8], ctr[8];
+ int unused, n;
+
+ /* We use 3DES encryption also for decryption.
+ * IV is not important for 3DES ecb
+ */
+ if (EVP_EncryptInit_ex(ctx, EVP_des_ede3_ecb(), NULL, key, NULL) <= 0)
+ goto process_cipher_des3ctr_err;
+
+ memcpy(ctr, iv, 8);
+ n = 0;
+
+ while (n < srclen) {
+ if (n % 8 == 0) {
+ if (EVP_EncryptUpdate(ctx,
+ (unsigned char *)&ebuf, &unused,
+ (const unsigned char *)&ctr, 8) <= 0)
+ goto process_cipher_des3ctr_err;
+ ctr_inc(ctr);
+ }
+ dst[n] = src[n] ^ ebuf[n % 8];
+ n++;
+ }
+
+ return 0;
+
+process_cipher_des3ctr_err:
+ OPENSSL_LOG_ERR("Process openssl cipher des 3 ede ctr failed");
+ return -EINVAL;
+}
+
+/** Process auth/encription aes-gcm algorithm */
+static int
+process_openssl_auth_encryption_gcm(uint8_t *src, int srclen,
+ uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
+ uint8_t *key, uint8_t *dst, uint8_t *tag,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int len = 0, unused = 0;
+ uint8_t empty[] = {};
+
+ if (EVP_EncryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_EncryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (aadlen > 0) {
+ if (EVP_EncryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ /* Workaround open ssl bug in version less then 1.0.1f */
+ if (EVP_EncryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
+ goto process_auth_encryption_gcm_err;
+ }
+
+ if (srclen > 0)
+ if (EVP_EncryptUpdate(ctx, dst, &len, src, srclen) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_EncryptFinal_ex(ctx, dst + len, &len) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, 16, tag) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ return 0;
+
+process_auth_encryption_gcm_err:
+ OPENSSL_LOG_ERR("Process openssl auth encryption gcm failed");
+ return -EINVAL;
+}
+
+static int
+process_openssl_auth_decryption_gcm(uint8_t *src, int srclen,
+ uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
+ uint8_t *key, uint8_t *dst, uint8_t *tag,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int len = 0, unused = 0;
+ uint8_t empty[] = {};
+
+ if (EVP_DecryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_TAG, 16, tag) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_DecryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (aadlen > 0) {
+ if (EVP_DecryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ /* Workaround open ssl bug in version less then 1.0.1f */
+ if (EVP_DecryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
+ goto process_auth_decryption_gcm_err;
+ }
+
+ if (srclen > 0)
+ if (EVP_DecryptUpdate(ctx, dst, &len, src, srclen) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_DecryptFinal_ex(ctx, dst + len, &len) <= 0)
+ goto process_auth_decryption_gcm_final_err;
+
+ return 0;
+
+process_auth_decryption_gcm_err:
+ OPENSSL_LOG_ERR("Process openssl auth description gcm failed");
+ return -EINVAL;
+
+process_auth_decryption_gcm_final_err:
+ return -EFAULT;
+}
+
+/** Process standard openssl auth algorithms */
+static int
+process_openssl_auth(uint8_t *src, uint8_t *dst,
+ __rte_unused uint8_t *iv, __rte_unused EVP_PKEY * pkey,
+ int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+ size_t dstlen;
+
+ if (EVP_DigestInit_ex(ctx, algo, NULL) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestUpdate(ctx, (char *)src, srclen) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestFinal_ex(ctx, dst, (unsigned int *)&dstlen) <= 0)
+ goto process_auth_err;
+
+ return 0;
+
+process_auth_err:
+ OPENSSL_LOG_ERR("Process openssl auth failed");
+ return -EINVAL;
+}
+
+/** Process standard openssl auth algorithms with hmac */
+static int
+process_openssl_auth_hmac(uint8_t *src, uint8_t *dst,
+ __rte_unused uint8_t *iv, EVP_PKEY *pkey,
+ int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+ size_t dstlen;
+
+ if (EVP_DigestSignInit(ctx, NULL, algo, NULL, pkey) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestSignUpdate(ctx, (char *)src, srclen) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestSignFinal(ctx, dst, &dstlen) <= 0)
+ goto process_auth_err;
+
+ return 0;
+
+process_auth_err:
+ OPENSSL_LOG_ERR("Process openssl auth failed");
+ return -EINVAL;
+}
+
+/*----------------------------------------------------------------------------*/
+
+/** Process auth/cipher combined operation */
+static void
+process_openssl_combined_op
+ (struct rte_crypto_op *op, struct openssl_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ /* cipher */
+ uint8_t *src = NULL, *dst = NULL, *iv, *tag, *aad;
+ int srclen, ivlen, aadlen, status = -1;
+
+ iv = op->sym->cipher.iv.data;
+ ivlen = op->sym->cipher.iv.length;
+ aad = op->sym->auth.aad.data;
+ aadlen = op->sym->auth.aad.length;
+
+ tag = op->sym->auth.digest.data;
+ if (tag == NULL)
+ tag = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset +
+ op->sym->cipher.data.length);
+
+ if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC)
+ srclen = 0;
+ else {
+ srclen = op->sym->cipher.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->cipher.data.offset);
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset);
+ }
+
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ status = process_openssl_auth_encryption_gcm(
+ src, srclen, aad, aadlen, iv, ivlen,
+ sess->cipher.key.data, dst, tag,
+ sess->cipher.ctx, sess->cipher.evp_algo);
+ else
+ status = process_openssl_auth_decryption_gcm(
+ src, srclen, aad, aadlen, iv, ivlen,
+ sess->cipher.key.data, dst, tag,
+ sess->cipher.ctx, sess->cipher.evp_algo);
+
+ if (status != 0) {
+ if (status == (-EFAULT) &&
+ sess->auth.operation ==
+ RTE_CRYPTO_AUTH_OP_VERIFY)
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ }
+}
+
+/** Process cipher operation */
+static void
+process_openssl_cipher_op
+ (struct rte_crypto_op *op, struct openssl_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ uint8_t *src, *dst, *iv;
+ int srclen, status;
+
+ srclen = op->sym->cipher.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->cipher.data.offset);
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset);
+
+ iv = op->sym->cipher.iv.data;
+
+ if (sess->cipher.mode == OPENSSL_CIPHER_LIB)
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ status = process_openssl_cipher_encrypt(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx,
+ sess->cipher.evp_algo);
+ else
+ status = process_openssl_cipher_decrypt(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx,
+ sess->cipher.evp_algo);
+ else
+ status = process_openssl_cipher_des3ctr(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx);
+
+ if (status != 0)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
+/** Process auth operation */
+static void
+process_openssl_auth_op
+ (struct rte_crypto_op *op, struct openssl_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ uint8_t *src, *dst;
+ int srclen, status;
+
+ srclen = op->sym->auth.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->auth.data.offset);
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY)
+ dst = (uint8_t *)rte_pktmbuf_append(mbuf_src,
+ op->sym->auth.digest.length);
+ else {
+ dst = op->sym->auth.digest.data;
+ if (dst == NULL)
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->auth.data.offset +
+ op->sym->auth.data.length);
+ }
+
+ switch (sess->auth.mode) {
+ case OPENSSL_AUTH_AS_AUTH:
+ status = process_openssl_auth(src, dst,
+ NULL, NULL, srclen,
+ sess->auth.auth.ctx, sess->auth.auth.evp_algo);
+ break;
+ case OPENSSL_AUTH_AS_HMAC:
+ status = process_openssl_auth_hmac(src, dst,
+ NULL, sess->auth.hmac.pkey, srclen,
+ sess->auth.hmac.ctx, sess->auth.hmac.evp_algo);
+ break;
+ default:
+ status = -1;
+ break;
+ }
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+ if (memcmp(dst, op->sym->auth.digest.data,
+ op->sym->auth.digest.length) != 0) {
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ }
+ /* Trim area used for digest from mbuf. */
+ rte_pktmbuf_trim(mbuf_src,
+ op->sym->auth.digest.length);
+ }
+
+ if (status != 0)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
+/** Process crypto operation for mbuf */
+static int
+process_op(const struct openssl_qp *qp, struct rte_crypto_op *op,
+ struct openssl_session *sess)
+{
+ struct rte_mbuf *msrc, *mdst;
+ int retval;
+
+ msrc = op->sym->m_src;
+ mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ switch (sess->chain_order) {
+ case OPENSSL_CHAIN_ONLY_CIPHER:
+ process_openssl_cipher_op(op, sess, msrc, mdst);
+ break;
+ case OPENSSL_CHAIN_ONLY_AUTH:
+ process_openssl_auth_op(op, sess, msrc, mdst);
+ break;
+ case OPENSSL_CHAIN_CIPHER_AUTH:
+ process_openssl_cipher_op(op, sess, msrc, mdst);
+ process_openssl_auth_op(op, sess, mdst, mdst);
+ break;
+ case OPENSSL_CHAIN_AUTH_CIPHER:
+ process_openssl_auth_op(op, sess, msrc, mdst);
+ process_openssl_cipher_op(op, sess, msrc, mdst);
+ break;
+ case OPENSSL_CHAIN_COMBINED:
+ process_openssl_combined_op(op, sess, msrc, mdst);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
+
+ /* Free session if a session-less crypto op */
+ if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
+ openssl_reset_session(sess);
+ memset(sess, 0, sizeof(struct openssl_session));
+ rte_mempool_put(qp->sess_mp, op->sym->session);
+ op->sym->session = NULL;
+ }
+
+
+ if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+ if (op->status != RTE_CRYPTO_OP_STATUS_ERROR)
+ retval = rte_ring_enqueue(qp->processed_ops, (void *)op);
+ else
+ retval = -1;
+
+ return retval;
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * PMD Framework
+ *------------------------------------------------------------------------------
+ */
+
+/** Enqueue burst */
+static uint16_t
+openssl_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct openssl_session *sess;
+ struct openssl_qp *qp = queue_pair;
+ int i, retval;
+
+ for (i = 0; i < nb_ops; i++) {
+ sess = get_session(qp, ops[i]);
+ if (unlikely(sess == NULL))
+ goto enqueue_err;
+
+ retval = process_op(qp, ops[i], sess);
+ if (unlikely(retval < 0))
+ goto enqueue_err;
+ }
+
+ qp->stats.enqueued_count += i;
+ return i;
+
+enqueue_err:
+ qp->stats.enqueue_err_count++;
+ return i;
+}
+
+/** Dequeue burst */
+static uint16_t
+openssl_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct openssl_qp *qp = queue_pair;
+
+ unsigned int nb_dequeued = 0;
+
+ nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
+ (void **)ops, nb_ops);
+ qp->stats.dequeued_count += nb_dequeued;
+
+ return nb_dequeued;
+}
+
+/** Create OPENSSL crypto device */
+static int
+cryptodev_openssl_create(const char *name,
+ struct rte_crypto_vdev_init_params *init_params)
+{
+ struct rte_cryptodev *dev;
+ char crypto_dev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ struct openssl_private *internals;
+
+ /* create a unique device name */
+ if (create_unique_device_name(crypto_dev_name,
+ RTE_CRYPTODEV_NAME_MAX_LEN) != 0) {
+ OPENSSL_LOG_ERR("failed to create unique cryptodev name");
+ return -EINVAL;
+ }
+
+ dev = rte_cryptodev_pmd_virtual_dev_init(crypto_dev_name,
+ sizeof(struct openssl_private),
+ init_params->socket_id);
+ if (dev == NULL) {
+ OPENSSL_LOG_ERR("failed to create cryptodev vdev");
+ goto init_error;
+ }
+
+ dev->dev_type = RTE_CRYPTODEV_OPENSSL_PMD;
+ dev->dev_ops = rte_openssl_pmd_ops;
+
+ /* register rx/tx burst functions for data path */
+ dev->dequeue_burst = openssl_pmd_dequeue_burst;
+ dev->enqueue_burst = openssl_pmd_enqueue_burst;
+
+ dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+ RTE_CRYPTODEV_FF_CPU_AESNI;
+
+ /* Set vector instructions mode supported */
+ internals = dev->data->dev_private;
+
+ internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
+ internals->max_nb_sessions = init_params->max_nb_sessions;
+
+ return 0;
+
+init_error:
+ OPENSSL_LOG_ERR("driver %s: cryptodev_openssl_create failed", name);
+
+ cryptodev_openssl_remove(crypto_dev_name);
+ return -EFAULT;
+}
+
+/** Initialise OPENSSL crypto device */
+static int
+cryptodev_openssl_probe(const char *name,
+ const char *input_args)
+{
+ struct rte_crypto_vdev_init_params init_params = {
+ RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS,
+ RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS,
+ rte_socket_id()
+ };
+
+ rte_cryptodev_parse_vdev_init_params(&init_params, input_args);
+
+ RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
+ init_params.socket_id);
+ RTE_LOG(INFO, PMD, " Max number of queue pairs = %d\n",
+ init_params.max_nb_queue_pairs);
+ RTE_LOG(INFO, PMD, " Max number of sessions = %d\n",
+ init_params.max_nb_sessions);
+
+ return cryptodev_openssl_create(name, &init_params);
+}
+
+/** Uninitialise OPENSSL crypto device */
+static int
+cryptodev_openssl_remove(const char *name)
+{
+ if (name == NULL)
+ return -EINVAL;
+
+ RTE_LOG(INFO, PMD,
+ "Closing OPENSSL crypto device %s on numa socket %u\n",
+ name, rte_socket_id());
+
+ return 0;
+}
+
+static struct rte_vdev_driver cryptodev_openssl_pmd_drv = {
+ .probe = cryptodev_openssl_probe,
+ .remove = cryptodev_openssl_remove
+};
+
+RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_OPENSSL_PMD,
+ cryptodev_openssl_pmd_drv);
+RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_OPENSSL_PMD,
+ "max_nb_queue_pairs=<int> "
+ "max_nb_sessions=<int> "
+ "socket_id=<int>");
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "rte_openssl_pmd_private.h"
+
+
+static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES GCM (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_AES_GCM,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = {
+ .min = 8,
+ .max = 12,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* AES GCM (CIPHER) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 12,
+ .max = 16,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* AES GMAC (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_AES_GMAC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = {
+ .min = 8,
+ .max = 65532,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+
+/** Configure device */
+static int
+openssl_pmd_config(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+/** Start device */
+static int
+openssl_pmd_start(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+/** Stop device */
+static void
+openssl_pmd_stop(__rte_unused struct rte_cryptodev *dev)
+{
+}
+
+/** Close device */
+static int
+openssl_pmd_close(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+
+/** Get device statistics */
+static void
+openssl_pmd_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct openssl_qp *qp = dev->data->queue_pairs[qp_id];
+
+ stats->enqueued_count += qp->stats.enqueued_count;
+ stats->dequeued_count += qp->stats.dequeued_count;
+
+ stats->enqueue_err_count += qp->stats.enqueue_err_count;
+ stats->dequeue_err_count += qp->stats.dequeue_err_count;
+ }
+}
+
+/** Reset device statistics */
+static void
+openssl_pmd_stats_reset(struct rte_cryptodev *dev)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct openssl_qp *qp = dev->data->queue_pairs[qp_id];
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+ }
+}
+
+
+/** Get device info */
+static void
+openssl_pmd_info_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info)
+{
+ struct openssl_private *internals = dev->data->dev_private;
+
+ if (dev_info != NULL) {
+ dev_info->dev_type = dev->dev_type;
+ dev_info->feature_flags = dev->feature_flags;
+ dev_info->capabilities = openssl_pmd_capabilities;
+ dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
+ dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ }
+}
+
+/** Release queue pair */
+static int
+openssl_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+ if (dev->data->queue_pairs[qp_id] != NULL) {
+ rte_free(dev->data->queue_pairs[qp_id]);
+ dev->data->queue_pairs[qp_id] = NULL;
+ }
+ return 0;
+}
+
+/** set a unique name for the queue pair based on it's name, dev_id and qp_id */
+static int
+openssl_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+ struct openssl_qp *qp)
+{
+ unsigned int n = snprintf(qp->name, sizeof(qp->name),
+ "openssl_pmd_%u_qp_%u",
+ dev->data->dev_id, qp->id);
+
+ if (n > sizeof(qp->name))
+ return -1;
+
+ return 0;
+}
+
+
+/** Create a ring to place processed operations on */
+static struct rte_ring *
+openssl_pmd_qp_create_processed_ops_ring(struct openssl_qp *qp,
+ unsigned int ring_size, int socket_id)
+{
+ struct rte_ring *r;
+
+ r = rte_ring_lookup(qp->name);
+ if (r) {
+ if (r->prod.size >= ring_size) {
+ OPENSSL_LOG_INFO(
+ "Reusing existing ring %s for processed ops",
+ qp->name);
+ return r;
+ }
+
+ OPENSSL_LOG_ERR(
+ "Unable to reuse existing ring %s for processed ops",
+ qp->name);
+ return NULL;
+ }
+
+ return rte_ring_create(qp->name, ring_size, socket_id,
+ RING_F_SP_ENQ | RING_F_SC_DEQ);
+}
+
+
+/** Setup a queue pair */
+static int
+openssl_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id)
+{
+ struct openssl_qp *qp = NULL;
+
+ /* Free memory prior to re-allocation if needed. */
+ if (dev->data->queue_pairs[qp_id] != NULL)
+ openssl_pmd_qp_release(dev, qp_id);
+
+ /* Allocate the queue pair data structure. */
+ qp = rte_zmalloc_socket("OPENSSL PMD Queue Pair", sizeof(*qp),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (qp == NULL)
+ return -ENOMEM;
+
+ qp->id = qp_id;
+ dev->data->queue_pairs[qp_id] = qp;
+
+ if (openssl_pmd_qp_set_unique_name(dev, qp))
+ goto qp_setup_cleanup;
+
+ qp->processed_ops = openssl_pmd_qp_create_processed_ops_ring(qp,
+ qp_conf->nb_descriptors, socket_id);
+ if (qp->processed_ops == NULL)
+ goto qp_setup_cleanup;
+
+ qp->sess_mp = dev->data->session_pool;
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+
+ return 0;
+
+qp_setup_cleanup:
+ if (qp)
+ rte_free(qp);
+
+ return -1;
+}
+
+/** Start queue pair */
+static int
+openssl_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Stop queue pair */
+static int
+openssl_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Return the number of allocated queue pairs */
+static uint32_t
+openssl_pmd_qp_count(struct rte_cryptodev *dev)
+{
+ return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the session structure */
+static unsigned
+openssl_pmd_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+ return sizeof(struct openssl_session);
+}
+
+/** Configure the session from a crypto xform chain */
+static void *
+openssl_pmd_session_configure(struct rte_cryptodev *dev __rte_unused,
+ struct rte_crypto_sym_xform *xform, void *sess)
+{
+ if (unlikely(sess == NULL)) {
+ OPENSSL_LOG_ERR("invalid session struct");
+ return NULL;
+ }
+
+ if (openssl_set_session_parameters(
+ sess, xform) != 0) {
+ OPENSSL_LOG_ERR("failed configure session parameters");
+ return NULL;
+ }
+
+ return sess;
+}
+
+
+/** Clear the memory of session so it doesn't leave key material behind */
+static void
+openssl_pmd_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
+{
+ /*
+ * Current just resetting the whole data structure, need to investigate
+ * whether a more selective reset of key would be more performant
+ */
+ if (sess) {
+ openssl_reset_session(sess);
+ memset(sess, 0, sizeof(struct openssl_session));
+ }
+}
+
+struct rte_cryptodev_ops openssl_pmd_ops = {
+ .dev_configure = openssl_pmd_config,
+ .dev_start = openssl_pmd_start,
+ .dev_stop = openssl_pmd_stop,
+ .dev_close = openssl_pmd_close,
+
+ .stats_get = openssl_pmd_stats_get,
+ .stats_reset = openssl_pmd_stats_reset,
+
+ .dev_infos_get = openssl_pmd_info_get,
+
+ .queue_pair_setup = openssl_pmd_qp_setup,
+ .queue_pair_release = openssl_pmd_qp_release,
+ .queue_pair_start = openssl_pmd_qp_start,
+ .queue_pair_stop = openssl_pmd_qp_stop,
+ .queue_pair_count = openssl_pmd_qp_count,
+
+ .session_get_size = openssl_pmd_session_get_size,
+ .session_configure = openssl_pmd_session_configure,
+ .session_clear = openssl_pmd_session_clear
+};
+
+struct rte_cryptodev_ops *rte_openssl_pmd_ops = &openssl_pmd_ops;
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _OPENSSL_PMD_PRIVATE_H_
+#define _OPENSSL_PMD_PRIVATE_H_
+
+#include <openssl/evp.h>
+#include <openssl/des.h>
+
+
+#define OPENSSL_LOG_ERR(fmt, args...) \
+ RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD), \
+ __func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_OPENSSL_DEBUG
+#define OPENSSL_LOG_INFO(fmt, args...) \
+ RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD), \
+ __func__, __LINE__, ## args)
+
+#define OPENSSL_LOG_DBG(fmt, args...) \
+ RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD), \
+ __func__, __LINE__, ## args)
+#else
+#define OPENSSL_LOG_INFO(fmt, args...)
+#define OPENSSL_LOG_DBG(fmt, args...)
+#endif
+
+
+/** OPENSSL operation order mode enumerator */
+enum openssl_chain_order {
+ OPENSSL_CHAIN_ONLY_CIPHER,
+ OPENSSL_CHAIN_ONLY_AUTH,
+ OPENSSL_CHAIN_CIPHER_AUTH,
+ OPENSSL_CHAIN_AUTH_CIPHER,
+ OPENSSL_CHAIN_COMBINED,
+ OPENSSL_CHAIN_NOT_SUPPORTED
+};
+
+/** OPENSSL cipher mode enumerator */
+enum openssl_cipher_mode {
+ OPENSSL_CIPHER_LIB,
+ OPENSSL_CIPHER_DES3CTR,
+};
+
+/** OPENSSL auth mode enumerator */
+enum openssl_auth_mode {
+ OPENSSL_AUTH_AS_AUTH,
+ OPENSSL_AUTH_AS_HMAC,
+};
+
+/** private data structure for each OPENSSL crypto device */
+struct openssl_private {
+ unsigned int max_nb_qpairs;
+ /**< Max number of queue pairs */
+ unsigned int max_nb_sessions;
+ /**< Max number of sessions */
+};
+
+/** OPENSSL crypto queue pair */
+struct openssl_qp {
+ uint16_t id;
+ /**< Queue Pair Identifier */
+ char name[RTE_CRYPTODEV_NAME_LEN];
+ /**< Unique Queue Pair Name */
+ struct rte_ring *processed_ops;
+ /**< Ring for placing process packets */
+ struct rte_mempool *sess_mp;
+ /**< Session Mempool */
+ struct rte_cryptodev_stats stats;
+ /**< Queue pair statistics */
+} __rte_cache_aligned;
+
+/** OPENSSL crypto private session structure */
+struct openssl_session {
+ enum openssl_chain_order chain_order;
+ /**< chain order mode */
+
+ /** Cipher Parameters */
+ struct {
+ enum rte_crypto_cipher_operation direction;
+ /**< cipher operation direction */
+ enum openssl_cipher_mode mode;
+ /**< cipher operation mode */
+ enum rte_crypto_cipher_algorithm algo;
+ /**< cipher algorithm */
+
+ struct {
+ uint8_t data[32];
+ /**< key data */
+ size_t length;
+ /**< key length in bytes */
+ } key;
+
+ const EVP_CIPHER *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_CIPHER_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } cipher;
+
+ /** Authentication Parameters */
+ struct {
+ enum rte_crypto_auth_operation operation;
+ /**< auth operation generate or verify */
+ enum openssl_auth_mode mode;
+ /**< auth operation mode */
+ enum rte_crypto_auth_algorithm algo;
+ /**< cipher algorithm */
+
+ union {
+ struct {
+ const EVP_MD *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_MD_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } auth;
+
+ struct {
+ EVP_PKEY *pkey;
+ /**< pointer to EVP key */
+ const EVP_MD *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_MD_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } hmac;
+ };
+ } auth;
+
+} __rte_cache_aligned;
+
+/** Set and validate OPENSSL crypto session parameters */
+extern int
+openssl_set_session_parameters(struct openssl_session *sess,
+ const struct rte_crypto_sym_xform *xform);
+
+/** Reset OPENSSL crypto session parameters */
+extern void
+openssl_reset_session(struct openssl_session *sess);
+
+/** device specific operations function pointer structure */
+extern struct rte_cryptodev_ops *rte_openssl_pmd_ops;
+
+#endif /* _OPENSSL_PMD_PRIVATE_H_ */
--- /dev/null
+DPDK_16.11 {
+ local: *;
+};
/**< AES-NI Multi buffer PMD device name */
#define CRYPTODEV_NAME_AESNI_GCM_PMD crypto_aesni_gcm
/**< AES-NI GCM PMD device name */
-#define CRYPTODEV_NAME_LIBCRYPTO_PMD crypto_libcrypto
+#define CRYPTODEV_NAME_OPENSSL_PMD crypto_openssl
/**< Open SSL Crypto PMD device name */
#define CRYPTODEV_NAME_QAT_SYM_PMD crypto_qat
/**< Intel QAT Symmetric Crypto PMD device name */
RTE_CRYPTODEV_SNOW3G_PMD, /**< SNOW 3G PMD */
RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */
RTE_CRYPTODEV_ZUC_PMD, /**< ZUC PMD */
- RTE_CRYPTODEV_LIBCRYPTO_PMD, /**< LibCrypto PMD */
+ RTE_CRYPTODEV_OPENSSL_PMD, /**< OpenSSL PMD */
};
extern const char **rte_cyptodev_names;
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += -lrte_pmd_libcrypto -lcrypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += -lrte_pmd_openssl -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
test -z "$LIBSSO_ZUC_PATH" || \
sed -ri 's,(PMD_ZUC=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_LIBCRYPTO=)n,\1y,' $1/.config
+ sed -ri 's,(PMD_OPENSSL=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
sed -ri 's,(PMD_QAT=)n,\1y,' $1/.config
sed -ri 's,(KNI_VHOST.*=)n,\1y,' $1/.config
git.droids-corp.org / dpdk.git / commitdiff