examples/ipsec-secgw: add scripts for functional test

The purpose of these scripts is to automate ipsec-secgw functional testing.
The scripts require two machines (SUT and DUT) connected through
at least 2 NICs and running linux (so far tested only on Ubuntu 18.04).
Introduced test-cases for the following scenarios:
- Transport/Tunnel modes
- AES-CBC SHA1
- AES-GCM
- ESN on/off
- legacy/librte_ipsec code path

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

diff --git a/examples/ipsec-secgw/test/common_defs.sh b/examples/ipsec-secgw/test/common_defs.sh
new file mode 100644 (file)
index 0000000..1ed31f8
--- /dev/null
+++ b/examples/ipsec-secgw/test/common_defs.sh
@@ -0,0 +1,162 @@
+#! /bin/bash
+
+#check that env vars are properly defined
+
+#check SGW_PATH
+if [[ -z "${SGW_PATH}" || ! -x ${SGW_PATH} ]]; then
+       echo "SGW_PATH is invalid"
+       exit 127
+fi
+
+#check ETH_DEV
+if [[ -z "${ETH_DEV}" ]]; then
+       echo "ETH_DEV is invalid"
+       exit 127
+fi
+
+#setup SGW_LCORE
+SGW_LCORE=${SGW_LCORE:-0}
+
+#check that REMOTE_HOST is reachable
+ssh ${REMOTE_HOST} echo
+st=$?
+if [[ $st -ne 0 ]]; then
+       echo "host ${REMOTE_HOST} is not reachable"
+       exit $st
+fi
+
+#get ether addr of REMOTE_HOST
+REMOTE_MAC=`ssh ${REMOTE_HOST} ip addr show dev ${REMOTE_IFACE}`
+st=$?
+REMOTE_MAC=`echo ${REMOTE_MAC} | sed -e 's/^.*ether //' -e 's/ brd.*$//'`
+if [[ $st -ne 0 || -z "${REMOTE_MAC}" ]]; then
+       echo "coouldn't retrieve ether addr from ${REMOTE_IFACE}"
+       exit 127
+fi
+
+LOCAL_IFACE=dtap0
+
+LOCAL_MAC="00:64:74:61:70:30"
+
+REMOTE_IPV4=192.168.31.14
+LOCAL_IPV4=192.168.31.92
+
+REMOTE_IPV6=fd12:3456:789a:0031:0000:0000:0000:0014
+LOCAL_IPV6=fd12:3456:789a:0031:0000:0000:0000:0092
+
+DPDK_PATH=${RTE_SDK:-${PWD}}
+DPDK_BUILD=${RTE_TARGET:-x86_64-native-linuxapp-gcc}
+
+SGW_OUT_FILE=./ipsec-secgw.out1
+
+SGW_CMD_EAL_PRM="--lcores=${SGW_LCORE} -n 4 ${ETH_DEV}"
+SGW_CMD_CFG="(0,0,${SGW_LCORE}),(1,0,${SGW_LCORE})"
+SGW_CMD_PRM="-p 0x3 -u 1 -P --config=\"${SGW_CMD_CFG}\""
+
+SGW_CFG_FILE=$(tempfile)
+
+# configure local host/ifaces
+config_local_iface()
+{
+       ifconfig ${LOCAL_IFACE} ${LOCAL_IPV4}/24 mtu 1400 up
+       ifconfig ${LOCAL_IFACE}
+
+       ip neigh flush dev ${LOCAL_IFACE}
+       ip neigh add ${REMOTE_IPV4} dev ${LOCAL_IFACE} lladdr ${REMOTE_MAC}
+       ip neigh show dev ${LOCAL_IFACE}
+}
+
+config6_local_iface()
+{
+       config_local_iface
+
+       sysctl -w net.ipv6.conf.${LOCAL_IFACE}.disable_ipv6=0
+       ip addr add  ${LOCAL_IPV6}/64 dev ${LOCAL_IFACE}
+
+       sysctl -w net.ipv6.conf.${LOCAL_IFACE}.mtu=1300
+
+       ip -6 neigh add ${REMOTE_IPV6} dev ${LOCAL_IFACE} lladdr ${REMOTE_MAC}
+       ip neigh show dev ${LOCAL_IFACE}
+}
+
+#configure remote host/iface
+config_remote_iface()
+{
+       ssh ${REMOTE_HOST} ifconfig ${REMOTE_IFACE} down
+       ssh ${REMOTE_HOST} ifconfig ${REMOTE_IFACE} ${REMOTE_IPV4}/24 up
+       ssh ${REMOTE_HOST} ifconfig ${REMOTE_IFACE}
+
+       ssh ${REMOTE_HOST} ip neigh flush dev ${REMOTE_IFACE}
+
+       # by some reason following ip neigh doesn't work for me here properly:
+       #ssh ${REMOTE_HOST} ip neigh add ${LOCAL_IPV4} \
+       #               dev ${REMOTE_IFACE} lladr ${LOCAL_MAC}
+       # so used arp instead.
+       ssh ${REMOTE_HOST} arp -i ${REMOTE_IFACE} -s ${LOCAL_IPV4} ${LOCAL_MAC}
+       ssh ${REMOTE_HOST} ip neigh show dev ${REMOTE_IFACE}
+
+       ssh ${REMOTE_HOST} iptables --flush
+}
+
+config6_remote_iface()
+{
+       config_remote_iface
+
+       ssh ${REMOTE_HOST} sysctl -w \
+               net.ipv6.conf.${REMOTE_IFACE}.disable_ipv6=0
+       ssh ${REMOTE_HOST} ip addr add  ${REMOTE_IPV6}/64 dev ${REMOTE_IFACE}
+
+       ssh ${REMOTE_HOST} ip -6 neigh add ${LOCAL_IPV6} \
+               dev ${REMOTE_IFACE} lladdr ${LOCAL_MAC}
+       ssh ${REMOTE_HOST} ip neigh show dev ${REMOTE_IFACE}
+
+       ssh ${REMOTE_HOST} ip6tables --flush
+}
+
+#configure remote and local host/iface
+config_iface()
+{
+       config_local_iface
+       config_remote_iface
+}
+
+config6_iface()
+{
+       config6_local_iface
+       config6_remote_iface
+}
+
+#start ipsec-secgw
+secgw_start()
+{
+       SGW_EXEC_FILE=$(tempfile)
+       cat <<EOF > ${SGW_EXEC_FILE}
+${SGW_PATH} ${SGW_CMD_EAL_PRM} ${CRYPTO_DEV} \
+--vdev="net_tap0,mac=fixed" \
+-- ${SGW_CMD_PRM} ${SGW_CMD_XPRM} -f ${SGW_CFG_FILE} > \
+${SGW_OUT_FILE} 2>&1 &
+p=\$!
+echo \$p
+EOF
+
+       cat ${SGW_EXEC_FILE}
+       SGW_PID=`/bin/bash -x ${SGW_EXEC_FILE}`
+
+       # wait till ipsec-secgw start properly
+       i=0
+       st=1
+       while [[ $i -ne 10 && st -ne 0 ]]; do
+               sleep 1
+               ifconfig ${LOCAL_IFACE}
+               st=$?
+               let i++
+       done
+}
+
+#stop ipsec-secgw and cleanup
+secgw_stop()
+{
+       kill ${SGW_PID}
+       rm -f ${SGW_EXEC_FILE}
+       rm -f ${SGW_CFG_FILE}
+}

diff --git a/examples/ipsec-secgw/test/data_rxtx.sh b/examples/ipsec-secgw/test/data_rxtx.sh
new file mode 100644 (file)
index 0000000..f23a6d5
--- /dev/null
+++ b/examples/ipsec-secgw/test/data_rxtx.sh
@@ -0,0 +1,62 @@
+#! /bin/bash
+
+TCP_PORT=22222
+
+ping_test1()
+{
+       dst=$1
+
+       i=0
+       st=0
+       while [[ $i -ne 1200 && $st -eq 0 ]];
+       do
+               let i++
+               ping -c 1 -s ${i} ${dst}
+               st=$?
+       done
+
+       if [[ $st -ne 0 ]]; then
+               echo "ERROR: $0 failed for dst=${dst}, sz=${i}"
+       fi
+       return $st;
+}
+
+ping6_test1()
+{
+       dst=$1
+
+       i=0
+       st=0
+       while [[ $i -ne 1200 && $st -eq 0 ]];
+       do
+               let i++
+               ping6 -c 1 -s ${i} ${dst}
+               st=$?
+       done
+
+       if [[ $st -ne 0 ]]; then
+               echo "ERROR: $0 failed for dst=${dst}, sz=${i}"
+       fi
+       return $st;
+}
+
+scp_test1()
+{
+       dst=$1
+
+       for sz in 1234 23456 345678 4567890 56789102 ; do
+               x=`basename $0`.${sz}
+               dd if=/dev/urandom of=${x} bs=${sz} count=1
+               scp ${x} [${dst}]:${x}
+               scp [${dst}]:${x} ${x}.copy1
+               diff -u ${x} ${x}.copy1
+               st=$?
+               rm -f ${x} ${x}.copy1
+               ssh ${REMOTE_HOST} rm -f ${x}
+               if [[ $st -ne 0 ]]; then
+                       return $st
+               fi
+       done
+
+       return 0;
+}

diff --git a/examples/ipsec-secgw/test/linux_test4.sh b/examples/ipsec-secgw/test/linux_test4.sh
new file mode 100644 (file)
index 0000000..d636f56
--- /dev/null
+++ b/examples/ipsec-secgw/test/linux_test4.sh
@@ -0,0 +1,63 @@
+#! /bin/bash
+
+# usage:  /bin/bash linux_test4.sh <ipsec_mode>
+# for list of available modes please refer to run_test.sh.
+# ipsec-secgw (IPv4 mode) functional test script.
+#
+# Note that for most of them you required appropriate crypto PMD/device
+# to be avaialble.
+# Also user has to setup properly the following environment variables:
+#  SGW_PATH - path to the ipsec-secgw binary to test
+#  REMOTE_HOST - ip/hostname of the DUT
+#  REMOTE_IFACE - iface name for the test-port on DUT
+#  ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
+# Also user can optonally setup:
+#  SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
+#  CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
+#  if none specified appropriate vdevs will be created by the scrit
+#
+# The purpose of the script is to automate ipsec-secgw testing
+# using another system running linux as a DUT.
+# It expects that SUT and DUT are connected through at least 2 NICs.
+# One NIC is expected to be managed by linux both machines,
+# and will be used as a control path
+# Make sure user from SUT can ssh to DUT without entering password.
+# Second NIC (test-port) should be reserved for DPDK on SUT,
+# and should be managed by linux on DUT.
+# The script starts ipsec-secgw with 2 NIC devices: test-port and tap vdev.
+# Then configures local tap iface and remote iface and ipsec policies
+# in the following way:
+# traffic going over test-port in both directions has to be
+# protected by ipsec.
+# raffic going over TAP in both directions doesn't have to be protected.
+# I.E:
+# DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
+# SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
+# Then tries to perorm some data transfer using the scheme decribed above.
+#
+
+DIR=`dirname $0`
+MODE=$1
+
+ . ${DIR}/common_defs.sh
+ . ${DIR}/${MODE}_defs.sh
+
+config_secgw
+
+secgw_start
+
+config_iface
+
+config_remote_xfrm
+
+ . ${DIR}/data_rxtx.sh
+
+ping_test1 ${REMOTE_IPV4}
+st=$?
+if [[ $st -eq 0 ]]; then
+       scp_test1 ${REMOTE_IPV4}
+       st=$?
+fi
+
+secgw_stop
+exit $st

diff --git a/examples/ipsec-secgw/test/linux_test6.sh b/examples/ipsec-secgw/test/linux_test6.sh
new file mode 100644 (file)
index 0000000..e30f607
--- /dev/null
+++ b/examples/ipsec-secgw/test/linux_test6.sh
@@ -0,0 +1,64 @@
+#! /bin/bash
+
+# usage:  /bin/bash linux_test6.sh <ipsec_mode>
+# for list of available modes please refer to run_test.sh.
+# ipsec-secgw (IPv6 mode) functional test script.
+#
+# Note that for most of them you required appropriate crypto PMD/device
+# to be avaialble.
+# Also user has to setup properly the following environment variables:
+#  SGW_PATH - path to the ipsec-secgw binary to test
+#  REMOTE_HOST - ip/hostname of the DUT
+#  REMOTE_IFACE - iface name for the test-port on DUT
+#  ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
+# Also user can optonally setup:
+#  SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
+#  CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
+#  if none specified appropriate vdevs will be created by the scrit
+#
+# The purpose of the script is to automate ipsec-secgw testing
+# using another system running linux as a DUT.
+# It expects that SUT and DUT are connected through at least 2 NICs.
+# One NIC is expected to be managed by linux both machines,
+# and will be used as a control path.
+# Make sure user from SUT can ssh to DUT without entering password,
+# also make sure that sshd over ipv6 is enabled.
+# Second NIC (test-port) should be reserved for DPDK on SUT,
+# and should be managed by linux on DUT.
+# The script starts ipsec-secgw with 2 NIC devices: test-port and tap vdev.
+# Then configures local tap iface and remote iface and ipsec policies
+# in the following way:
+# traffic going over test-port in both directions has to be
+# protected by ipsec.
+# raffic going over TAP in both directions doesn't have to be protected.
+# I.E:
+# DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
+# SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
+# Then tries to perorm some data transfer using the scheme decribed above.
+#
+
+DIR=`dirname $0`
+MODE=$1
+
+ . ${DIR}/common_defs.sh
+ . ${DIR}/${MODE}_defs.sh
+
+config_secgw
+
+secgw_start
+
+config6_iface
+
+config6_remote_xfrm
+
+ . ${DIR}/data_rxtx.sh
+
+ping6_test1 ${REMOTE_IPV6}
+st=$?
+if [[ $st -eq 0 ]]; then
+       scp_test1 ${REMOTE_IPV6}
+       st=$?
+fi
+
+secgw_stop
+exit $st

diff --git a/examples/ipsec-secgw/test/run_test.sh b/examples/ipsec-secgw/test/run_test.sh
new file mode 100644 (file)
index 0000000..6dc0ce5
--- /dev/null
+++ b/examples/ipsec-secgw/test/run_test.sh
@@ -0,0 +1,80 @@
+#! /bin/bash
+
+# usage: /bin/bash run_test.sh [-46]
+# Run all defined linux_test[4,6].sh test-cases one by one
+# user has to setup properly the following environment variables:
+#  SGW_PATH - path to the ipsec-secgw binary to test
+#  REMOTE_HOST - ip/hostname of the DUT
+#  REMOTE_IFACE - iface name for the test-port on DUT
+#  ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
+# Also user can optonally setup:
+#  SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
+#  CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
+#  if none specified appropriate vdevs will be created by the scrit
+# refer to linux_test1.sh for more information
+
+# All supported modes to test.
+# naming convention:
+# 'old' means that ipsec-secgw will run in legacy (non-librte_ipsec mode)
+# 'tun/trs' refer to tunnel/transport mode respectively
+LINUX_TEST="tun_aescbc_sha1 \
+tun_aescbc_sha1_esn \
+tun_aescbc_sha1_esn_atom \
+tun_aesgcm \
+tun_aesgcm_esn \
+tun_aesgcm_esn_atom \
+trs_aescbc_sha1 \
+trs_aescbc_sha1_esn \
+trs_aescbc_sha1_esn_atom \
+trs_aesgcm \
+trs_aesgcm_esn \
+trs_aesgcm_esn_atom \
+tun_aescbc_sha1_old \
+tun_aesgcm_old \
+trs_aescbc_sha1_old \
+trs_aesgcm_old"
+
+DIR=`dirname $0`
+
+# get input options
+st=0
+run4=0
+run6=0
+while [[ ${st} -eq 0 ]]; do
+       getopts ":46" opt
+       st=$?
+       if [[ "${opt}" == "4" ]]; then
+               run4=1
+       elif [[ "${opt}" == "6" ]]; then
+               run6=1
+       fi
+done
+
+if [[ ${run4} -eq 0 && {run6} -eq 0 ]]; then
+       exit 127
+fi
+
+for i in ${LINUX_TEST}; do
+
+       echo "starting test ${i}"
+
+       st4=0
+       if [[ ${run4} -ne 0 ]]; then
+               /bin/bash ${DIR}/linux_test4.sh ${i}
+               st4=$?
+               echo "test4 ${i} finished with status ${st4}"
+       fi
+
+       st6=0
+       if [[ ${run6} -ne 0 ]]; then
+               /bin/bash ${DIR}/linux_test6.sh ${i}
+               st6=$?
+               echo "test6 ${i} finished with status ${st6}"
+       fi
+
+       let "st = st4 + st6"
+       if [[ $st -ne 0 ]]; then
+               echo "ERROR test ${i} FAILED"
+               exit $st
+       fi
+done

diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
new file mode 100644 (file)
index 0000000..e2621e0
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
@@ -0,0 +1,69 @@
+#! /bin/bash
+
+CRYPTO_DEV=${CRYPTO_DEV:-'--vdev="crypto_aesni_mb0"'}
+
+#generate cfg file for ipsec-secgw
+config_secgw()
+{
+       cat <<EOF > ${SGW_CFG_FILE}
+#SP in IPv4 rules
+sp ipv4 in esp protect 7 pri 2 src ${REMOTE_IPV4}/32 dst ${LOCAL_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv4 rules
+sp ipv4 out esp protect 7 pri 2 src ${LOCAL_IPV4}/32 dst ${REMOTE_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#sp in IPv6 rules
+sp ipv6 in esp protect 9 pri 2 src ${REMOTE_IPV6}/128 dst ${LOCAL_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv6 rules
+sp ipv6 out esp protect 9 pri 2 src ${LOCAL_IPV6}/128 dst ${REMOTE_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SA in rules
+sa in 7 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport
+
+sa in 9 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport
+
+#SA out rules
+sa out 7 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport
+
+#SA out rules
+sa out 9 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport
+
+#Routing rules
+rt ipv4 dst ${REMOTE_IPV4}/32 port 0
+rt ipv4 dst ${LOCAL_IPV4}/32 port 1
+
+rt ipv6 dst ${REMOTE_IPV6}/128 port 0
+rt ipv6 dst ${LOCAL_IPV6}/128 port 1
+
+#neighbours
+neigh port 0 ${REMOTE_MAC}
+neigh port 1 ${LOCAL_MAC}
+EOF
+
+       cat ${SGW_CFG_FILE}
+}

diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_defs.sh
new file mode 100644 (file)
index 0000000..d68552f
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_defs.sh
@@ -0,0 +1,67 @@
+#! /bin/bash
+
+. ${DIR}/trs_aescbc_sha1_common_defs.sh
+
+SGW_CMD_XPRM='-w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode transport replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode transport replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 4
+
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode transport replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode transport replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_atom_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_atom_defs.sh
new file mode 100644 (file)
index 0000000..f16222e
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_atom_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aescbc_sha1_esn_defs.sh
+
+SGW_CMD_XPRM='-e -a -w 300'

diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_defs.sh
new file mode 100644 (file)
index 0000000..ce7c977
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_esn_defs.sh
@@ -0,0 +1,66 @@
+#! /bin/bash
+
+. ${DIR}/trs_aescbc_sha1_common_defs.sh
+
+SGW_CMD_XPRM='-e -w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode transport replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode transport replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode transport replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode transport replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_old_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_old_defs.sh
new file mode 100644 (file)
index 0000000..a3abb61
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aescbc_sha1_defs.sh
+
+SGW_CMD_XPRM=

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_common_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_common_defs.sh
new file mode 100644 (file)
index 0000000..f6c5bf5
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_common_defs.sh
@@ -0,0 +1,60 @@
+#! /bin/bash
+
+CRYPTO_DEV=${CRYPTO_DEV:-'--vdev="crypto_aesni_gcm0"'}
+
+#generate cfg file for ipsec-secgw
+config_secgw()
+{
+       cat <<EOF > ${SGW_CFG_FILE}
+#SP in IPv4 rules
+sp ipv4 in esp protect 7 pri 2 src ${REMOTE_IPV4}/32 dst ${LOCAL_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv4 rules
+sp ipv4 out esp protect 7 pri 2 src ${LOCAL_IPV4}/32 dst ${REMOTE_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP in IPv6 rules
+sp ipv6 in esp protect 9 pri 2 src ${REMOTE_IPV6}/128 dst ${LOCAL_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv6 rules
+sp ipv6 out esp protect 9 pri 2 src ${LOCAL_IPV6}/128 dst ${REMOTE_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SA in rules
+sa in 7 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport ${SGW_CFG_XPRM}
+
+sa in 9 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport ${SGW_CFG_XPRM}
+
+#SA out rules
+sa out 7 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport ${SGW_CFG_XPRM}
+
+sa out 9 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode transport ${SGW_CFG_XPRM}
+
+#Routing rules
+rt ipv4 dst ${REMOTE_IPV4}/32 port 0
+rt ipv4 dst ${LOCAL_IPV4}/32 port 1
+
+rt ipv6 dst ${REMOTE_IPV6}/128 port 0
+rt ipv6 dst ${LOCAL_IPV6}/128 port 1
+
+#neighbours
+neigh port 0 ${REMOTE_MAC}
+neigh port 1 ${LOCAL_MAC}
+EOF
+
+       cat ${SGW_CFG_FILE}
+}

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_defs.sh
new file mode 100644 (file)
index 0000000..a4d902b
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_defs.sh
@@ -0,0 +1,76 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_common_defs.sh
+
+SGW_CMD_XPRM='-w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode transport replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode transport replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+
+       # to overcome problem with ipsec-secgw for inline mode,
+       # when first packet(s) will be always dropped.
+       # note that ping will fail here
+       ssh ${REMOTE_HOST} ping -c 1 ${LOCAL_IPV4}
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode transport replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode transport replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+
+       # to overcome problem with ipsec-secgw for inline mode,
+       # when first packet(s) will be always dropped.
+       # note that ping will fail here
+       ssh ${REMOTE_HOST} ping -c 1 ${LOCAL_IPV6}
+}

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_esn_atom_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_esn_atom_defs.sh
new file mode 100644 (file)
index 0000000..80d8d63
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_esn_atom_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_esn_defs.sh
+
+SGW_CMD_XPRM='-e -a -w 300'

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_esn_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_esn_defs.sh
new file mode 100644 (file)
index 0000000..94958d1
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_esn_defs.sh
@@ -0,0 +1,66 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_common_defs.sh
+
+SGW_CMD_XPRM='-e -w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode transport replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode transport replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl proto esp mode transport reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl proto esp mode transport reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode transport replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode transport replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_defs.sh
new file mode 100644 (file)
index 0000000..de6048d
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_defs.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_defs.sh
+
+CRYPTO_DEV='--vdev="crypto_null0"'
+SGW_CFG_XPRM='port_id 0 type inline-crypto-offload'

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_old_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_old_defs.sh
new file mode 100644 (file)
index 0000000..0523049
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_inline_crypto_defs.sh
+
+SGW_CMD_XPRM=

diff --git a/examples/ipsec-secgw/test/trs_aesgcm_old_defs.sh b/examples/ipsec-secgw/test/trs_aesgcm_old_defs.sh
new file mode 100644 (file)
index 0000000..951e6b6
--- /dev/null
+++ b/examples/ipsec-secgw/test/trs_aesgcm_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_defs.sh
+
+SGW_CMD_XPRM=

diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
new file mode 100644 (file)
index 0000000..4025da2
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
@@ -0,0 +1,68 @@
+#! /bin/bash
+
+CRYPTO_DEV=${CRYPTO_DEV:-'--vdev="crypto_aesni_mb0"'}
+
+#generate cfg file for ipsec-secgw
+config_secgw()
+{
+       cat <<EOF > ${SGW_CFG_FILE}
+#sp in IPv4 rules
+sp ipv4 in esp protect 7 pri 2 src ${REMOTE_IPV4}/32 dst ${LOCAL_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv4 rules
+sp ipv4 out esp protect 7 pri 2 src ${LOCAL_IPV4}/32 dst ${REMOTE_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#sp in IPv6 rules
+sp ipv6 in esp protect 9 pri 2 src ${REMOTE_IPV6}/128 dst ${LOCAL_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv6 rules
+sp ipv6 out esp protect 9 pri 2 src ${LOCAL_IPV6}/128 dst ${REMOTE_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SA in rules
+sa in 7 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+
+sa in 9 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+
+#SA out rules
+sa out 7 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+
+sa out 9 cipher_algo aes-128-cbc \
+cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+auth_algo sha1-hmac \
+auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+
+#Routing rules
+rt ipv4 dst ${REMOTE_IPV4}/32 port 0
+rt ipv4 dst ${LOCAL_IPV4}/32 port 1
+
+rt ipv6 dst ${REMOTE_IPV6}/128 port 0
+rt ipv6 dst ${LOCAL_IPV6}/128 port 1
+
+#neighbours
+neigh port 0 ${REMOTE_MAC}
+neigh port 1 ${LOCAL_MAC}
+EOF
+
+       cat ${SGW_CFG_FILE}
+}

diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_defs.sh
new file mode 100644 (file)
index 0000000..18aade3
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_defs.sh
@@ -0,0 +1,70 @@
+#! /bin/bash
+
+. ${DIR}/tun_aescbc_sha1_common_defs.sh
+
+SGW_CMD_XPRM='-w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp mode tunnel reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp mode tunnel reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode tunnel replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode tunnel replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp mode tunnel reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp mode tunnel reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode tunnel replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode tunnel replay-window 64 \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_atom_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_atom_defs.sh
new file mode 100644 (file)
index 0000000..6b4a821
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_atom_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aescbc_sha1_esn_defs.sh
+
+SGW_CMD_XPRM='-e -a -w 300'

diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_defs.sh
new file mode 100644 (file)
index 0000000..28c1125
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_esn_defs.sh
@@ -0,0 +1,70 @@
+#! /bin/bash
+
+. ${DIR}/tun_aescbc_sha1_common_defs.sh
+
+SGW_CMD_XPRM='-e -w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp mode tunnel reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp mode tunnel reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode tunnel replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode tunnel replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp mode tunnel reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp mode tunnel reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode tunnel replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode tunnel replay-window 64 flag esn \
+auth sha1 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef \
+enc aes 0xdeadbeefdeadbeefdeadbeefdeadbeef
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_old_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_old_defs.sh
new file mode 100644 (file)
index 0000000..3c0d8d1
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aescbc_sha1_defs.sh
+
+SGW_CMD_XPRM=

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_common_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_common_defs.sh
new file mode 100644 (file)
index 0000000..2783779
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_common_defs.sh
@@ -0,0 +1,60 @@
+#! /bin/bash
+
+CRYPTO_DEV=${CRYPTO_DEV:-'--vdev="crypto_aesni_gcm0"'}
+
+#generate cfg file for ipsec-secgw
+config_secgw()
+{
+       cat <<EOF > ${SGW_CFG_FILE}
+#sp in IPv4 rules
+sp ipv4 in esp protect 7 pri 2 src ${REMOTE_IPV4}/32 dst ${LOCAL_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv4 rules
+sp ipv4 out esp protect 7 pri 2 src ${LOCAL_IPV4}/32 dst ${REMOTE_IPV4}/32 \
+sport 0:65535 dport 0:65535
+sp ipv4 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#sp in IPv6 rules
+sp ipv6 in esp protect 9 pri 2 src ${REMOTE_IPV6}/128 dst ${LOCAL_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 in esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SP out IPv6 rules
+sp ipv6 out esp protect 9 pri 2 src ${LOCAL_IPV6}/128 dst ${REMOTE_IPV6}/128 \
+sport 0:65535 dport 0:65535
+sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
+
+#SA in rules
+sa in 7 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
+
+sa in 9 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
+
+#SA out rules
+sa out 7 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
+
+sa out 9 aead_algo aes-128-gcm \
+aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
+
+#Routing rules
+rt ipv4 dst ${REMOTE_IPV4}/32 port 0
+rt ipv4 dst ${LOCAL_IPV4}/32 port 1
+
+rt ipv6 dst ${REMOTE_IPV6}/128 port 0
+rt ipv6 dst ${LOCAL_IPV6}/128 port 1
+
+#neighbours
+neigh port 0 ${REMOTE_MAC}
+neigh port 1 ${LOCAL_MAC}
+EOF
+
+       cat ${SGW_CFG_FILE}
+}

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_defs.sh
new file mode 100644 (file)
index 0000000..1764ef6
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_defs.sh
@@ -0,0 +1,80 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_common_defs.sh
+
+SGW_CMD_XPRM='-w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp mode tunnel reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp mode tunnel reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode tunnel replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode tunnel replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+
+       # to overcome problem with ipsec-secgw for inline mode,
+       # when first packet(s) will be always dropped.
+       # note that ping will fail here
+       ssh ${REMOTE_HOST} ping -c 1 ${LOCAL_IPV4}
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp mode tunnel reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp mode tunnel reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode tunnel replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode tunnel replay-window 64 \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+
+       # to overcome problem with ipsec-secgw for inline mode,
+       # when first packet(s) will be always dropped.
+       # note that ping will fail here
+       ssh ${REMOTE_HOST} ping6 -c 1 ${LOCAL_IPV6}
+}

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_esn_atom_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_esn_atom_defs.sh
new file mode 100644 (file)
index 0000000..dab1460
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_esn_atom_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_esn_defs.sh
+
+SGW_CMD_XPRM='-e -a -w 300'

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_esn_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_esn_defs.sh
new file mode 100644 (file)
index 0000000..6062323
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_esn_defs.sh
@@ -0,0 +1,70 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_common_defs.sh
+
+SGW_CMD_XPRM='-e -w 300'
+
+config_remote_xfrm()
+{
+       ssh ${REMOTE_HOST} ip xfrm policy flush
+       ssh ${REMOTE_HOST} ip xfrm state flush
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp mode tunnel reqid 1
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp mode tunnel reqid 2
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV4} dst ${LOCAL_IPV4} \
+proto esp spi 7 reqid 1 mode tunnel replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV4} dst ${REMOTE_IPV4} \
+proto esp spi 7 reqid 2 mode tunnel replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}
+
+config6_remote_xfrm()
+{
+       config_remote_xfrm
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+dir out ptype main action allow \
+tmpl src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp mode tunnel reqid 3
+
+       ssh ${REMOTE_HOST} ip xfrm policy add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+dir in ptype main action allow \
+tmpl src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp mode tunnel reqid 4
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${REMOTE_IPV6} dst ${LOCAL_IPV6} \
+proto esp spi 9 reqid 3 mode tunnel replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm state add \
+src ${LOCAL_IPV6} dst ${REMOTE_IPV6} \
+proto esp spi 9 reqid 4 mode tunnel replay-window 64 flag esn \
+aead "rfc4106\(gcm\(aes\)\)" \
+0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef 128
+
+       ssh ${REMOTE_HOST} ip xfrm policy list
+       ssh ${REMOTE_HOST} ip xfrm state list
+}

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_defs.sh
new file mode 100644 (file)
index 0000000..eafefe7
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_defs.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_defs.sh
+
+CRYPTO_DEV='--vdev="crypto_null0"'
+SGW_CFG_XPRM='port_id 0 type inline-crypto-offload'

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_old_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_old_defs.sh
new file mode 100644 (file)
index 0000000..de65961
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_inline_crypto_defs.sh
+
+SGW_CMD_XPRM=

diff --git a/examples/ipsec-secgw/test/tun_aesgcm_old_defs.sh b/examples/ipsec-secgw/test/tun_aesgcm_old_defs.sh
new file mode 100644 (file)
index 0000000..e0a015e
--- /dev/null
+++ b/examples/ipsec-secgw/test/tun_aesgcm_old_defs.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_defs.sh
+
+SGW_CMD_XPRM=