* other things which then allows the ASIC to direct the incoming traffic
* to an appropriate VNIC or Rx ring.
*/
-
/* Input (96 bytes) */
struct hwrm_cfa_l2_filter_alloc_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
/*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both TX and RX
- * paths of the chip.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates the applicability to the loopback
- * path.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x2)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x4)
- /*
- * If this flag is set, all t_l2_* fields are invalid and they should
- * not be specified. If this flag is set, then l2_* fields refer to
- * fields of outermost L2 header.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
- UINT32_C(0x8)
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint32_t flags;
-
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates the applicability to the
+ * loopback path.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid and they
+ * should not be specified. If this flag is set, then l2_*
+ * fields refer to fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
+ uint32_t enables;
/* This bit must be '1' for the l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
- UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
/* This bit must be '1' for the l2_addr_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
- UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK UINT32_C(0x2)
/* This bit must be '1' for the l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
- UINT32_C(0x4)
- /* This bit must be '1' for the l2_ovlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
- UINT32_C(0x8)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK UINT32_C(0x8)
/* This bit must be '1' for the l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
- UINT32_C(0x10)
- /* This bit must be '1' for the l2_ivlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
- UINT32_C(0x20)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK UINT32_C(0x20)
/* This bit must be '1' for the t_l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
- UINT32_C(0x40)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
/*
- * This bit must be '1' for the t_l2_addr_mask field to be configured.
+ * This bit must be '1' for the t_l2_addr_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
- UINT32_C(0x80)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK UINT32_C(0x80)
/* This bit must be '1' for the t_l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
- UINT32_C(0x100)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN UINT32_C(0x100)
/*
- * This bit must be '1' for the t_l2_ovlan_mask field to be configured.
+ * This bit must be '1' for the t_l2_ovlan_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
- UINT32_C(0x200)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK UINT32_C(0x200)
/* This bit must be '1' for the t_l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
- UINT32_C(0x400)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN UINT32_C(0x400)
/*
- * This bit must be '1' for the t_l2_ivlan_mask field to be configured.
+ * This bit must be '1' for the t_l2_ivlan_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
- UINT32_C(0x800)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK UINT32_C(0x800)
/* This bit must be '1' for the src_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
- UINT32_C(0x1000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
/* This bit must be '1' for the src_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
- UINT32_C(0x2000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
/* This bit must be '1' for the tunnel_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
- UINT32_C(0x4000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4000)
/* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x8000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
/*
- * This bit must be '1' for the mirror_vnic_id field to be configured.
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x10000)
- uint32_t enables;
-
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x10000)
+ uint8_t l2_addr[6];
/*
- * This value sets the match value for the L2 MAC address. Destination
- * MAC address for RX path. Source MAC address for TX path.
+ * This value sets the match value for the L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for
+ * TX path.
*/
- uint8_t l2_addr[6];
-
uint8_t unused_0;
uint8_t unused_1;
-
+ uint8_t l2_addr_mask[6];
/*
- * This value sets the mask value for the L2 address. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the L2 address. A value of
+ * 0 will mask the corresponding bit from compare.
*/
- uint8_t l2_addr_mask[6];
-
- /* This value sets VLAN ID value for outer VLAN. */
uint16_t l2_ovlan;
-
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan_mask;
/*
- * This value sets the mask value for the ovlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the ovlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint16_t l2_ovlan_mask;
-
- /* This value sets VLAN ID value for inner VLAN. */
uint16_t l2_ivlan;
-
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan_mask;
/*
- * This value sets the mask value for the ivlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the ivlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint16_t l2_ivlan_mask;
-
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t t_l2_addr[6];
/*
- * This value sets the match value for the tunnel L2 MAC address.
- * Destination MAC address for RX path. Source MAC address for TX path.
+ * This value sets the match value for the tunnel L2 MAC
+ * address. Destination MAC address for RX path. Source MAC
+ * address for TX path.
*/
- uint8_t t_l2_addr[6];
-
uint8_t unused_4;
uint8_t unused_5;
-
+ uint8_t t_l2_addr_mask[6];
/*
- * This value sets the mask value for the tunnel L2 address. A value of
- * 0 will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel L2 address. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint8_t t_l2_addr_mask[6];
-
- /* This value sets VLAN ID value for tunnel outer VLAN. */
uint16_t t_l2_ovlan;
-
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan_mask;
/*
- * This value sets the mask value for the tunnel ovlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel ovlan id. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint16_t t_l2_ovlan_mask;
-
- /* This value sets VLAN ID value for tunnel inner VLAN. */
uint16_t t_l2_ivlan;
-
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan_mask;
/*
- * This value sets the mask value for the tunnel ivlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel ivlan id. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint16_t t_l2_ivlan_mask;
-
- /* This value identifies the type of source of the packet. */
- /* Network port */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT \
- (UINT32_C(0x0) << 0)
- /* Physical function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF \
- (UINT32_C(0x1) << 0)
- /* Virtual function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF \
- (UINT32_C(0x2) << 0)
- /* Virtual NIC of a function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC \
- (UINT32_C(0x3) << 0)
- /* Embedded processor for CFA management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG \
- (UINT32_C(0x4) << 0)
- /* Embedded processor for OOB management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE \
- (UINT32_C(0x5) << 0)
- /* Embedded processor for RoCE */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO \
- (UINT32_C(0x6) << 0)
- /* Embedded processor for network proxy functions */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG \
- (UINT32_C(0x7) << 0)
uint8_t src_type;
-
+ /* This value identifies the type of source of the packet. */
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
uint8_t unused_6;
+ uint32_t src_id;
/*
- * This value is the id of the source. For a network port, it represents
- * port_id. For a physical function, it represents fid. For a virtual
- * function, it represents vf_id. For a vnic, it represents vnic_id. For
- * embedded processors, this id is not valid. Notes: 1. The function ID
- * is implied if it src_id is not provided for a src_type that is either
+ * This value is the id of the source. For a network port, it
+ * represents port_id. For a physical function, it represents
+ * fid. For a virtual function, it represents vf_id. For a vnic,
+ * it represents vnic_id. For embedded processors, this id is
+ * not valid. Notes: 1. The function ID is implied if it src_id
+ * is not provided for a src_type that is either
*/
- uint32_t src_id;
-
- /* Tunnel Type. */
- /* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- (UINT32_C(0x0) << 0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- (UINT32_C(0x1) << 0)
- /*
- * Network Virtualization Generic Routing Encapsulation (NVGRE)
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- (UINT32_C(0x2) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside Ethernet payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- (UINT32_C(0x3) << 0)
- /* IP in IP */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- (UINT32_C(0x4) << 0)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- (UINT32_C(0x5) << 0)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- (UINT32_C(0x6) << 0)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- (UINT32_C(0x7) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside IP datagram
- * payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- (UINT32_C(0x8) << 0)
- /* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- (UINT32_C(0xff) << 0)
uint8_t tunnel_type;
-
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /*
+ * Network Virtualization Generic Routing
+ * Encapsulation (NVGRE)
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /*
+ * Generic Routing Encapsulation (GRE) inside
+ * Ethernet payload
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /*
+ * Generic Routing Encapsulation (GRE) inside IP
+ * datagram payload
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
uint8_t unused_7;
-
+ uint16_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
- uint16_t dst_id;
-
- /* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint16_t mirror_vnic_id;
-
- /*
- * This hint is provided to help in placing the filter in the filter
- * table.
- */
- /* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
- (UINT32_C(0x0) << 0)
- /* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
- (UINT32_C(0x1) << 0)
- /* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
- (UINT32_C(0x2) << 0)
- /* As high as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
- (UINT32_C(0x3) << 0)
- /* As low as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
- (UINT32_C(0x4) << 0)
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint8_t pri_hint;
-
+ /*
+ * This hint is provided to help in placing the filter in the
+ * filter table.
+ */
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
uint8_t unused_8;
uint32_t unused_9;
-
+ uint64_t l2_filter_id_hint;
/*
- * This is the ID of the filter that goes along with the pri_hint. This
- * field is valid only for the following values. 1 - Above the given
- * filter 2 - Below the given filter
+ * This is the ID of the filter that goes along with the
+ * pri_hint. This field is valid only for the following values.
+ * 1 - Above the given filter 2 - Below the given filter
*/
- uint64_t l2_filter_id_hint;
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_cfa_l2_filter_alloc_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
+ /* This field returns the type of original request. */
uint16_t seq_id;
-
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
-
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
uint64_t l2_filter_id;
-
/*
- * This is the ID of the flow associated with this filter. This value
- * shall be used to match and associate the flow identifier returned in
- * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
*/
uint32_t flow_id;
-
+ /*
+ * This is the ID of the flow associated with this filter. This
+ * value shall be used to match and associate the flow
+ * identifier returned in completion records. A value of
+ * 0xFFFFFFFF shall indicate no flow id.
+ */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_cfa_l2_filter_free */
* Description: Free a L2 filter. The HWRM shall free all associated filter
* resources with the L2 filter.
*/
-
/* Input (24 bytes) */
struct hwrm_cfa_l2_filter_free_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_free_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
/* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_filter_cfg */
+/* Description: Change the configuration of an existing L2 filter */
+/* Input (40 bytes) */
+struct hwrm_cfa_l2_filter_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
+ uint32_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_filter_cfg_output {
+ uint16_t error_code;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
-
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_cfa_l2_set_rx_mask */
/* Description: This command will set rx mask of the function. */
-
-/* Input (40 bytes) */
+/* Input (56 bytes) */
struct hwrm_cfa_l2_set_rx_mask_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
- /* VNIC ID */
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint32_t vnic_id;
-
+ /* VNIC ID */
+ uint32_t mask;
/* Reserved for future use. */
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
/*
- * When this bit is '1', the function is requested to accept multi-cast
- * packets specified by the multicast addr table.
+ * When this bit is '1', the function is requested to accept
+ * multi-cast packets specified by the multicast addr table.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
/*
- * When this bit is '1', the function is requested to accept all multi-
- * cast packets.
+ * When this bit is '1', the function is requested to accept all
+ * multi-cast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
/*
- * When this bit is '1', the function is requested to accept broadcast
- * packets.
+ * When this bit is '1', the function is requested to accept
+ * broadcast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
/*
- * When this bit is '1', the function is requested to be put in the
- * promiscuous mode. The HWRM should accept any function to set up
- * promiscuous mode. The HWRM shall follow the semantics below for the
- * promiscuous mode support. # When partitioning is not enabled on a
- * port (i.e. single PF on the port), then the PF shall be allowed to be
- * in the promiscuous mode. When the PF is in the promiscuous mode, then
- * it shall receive all host bound traffic on that port. # When
- * partitioning is enabled on a port (i.e. multiple PFs per port) and a
- * PF on that port is in the promiscuous mode, then the PF receives all
- * traffic within that partition as identified by a unique identifier
- * for the PF (e.g. S-Tag). If a unique outer VLAN for the PF is
- * specified, then the setting of promiscuous mode on that PF shall
- * result in the PF receiving all host bound traffic with matching outer
- * VLAN. # A VF shall can be set in the promiscuous mode. In the
- * promiscuous mode, the VF does not receive any traffic unless a unique
- * outer VLAN for the VF is specified. If a unique outer VLAN for the VF
- * is specified, then the setting of promiscuous mode on that VF shall
- * result in the VF receiving all host bound traffic with the matching
- * outer VLAN. # The HWRM shall allow the setting of promiscuous mode on
- * a function independently from the promiscuous mode settings on other
- * functions.
+ * When this bit is '1', the function is requested to be put in
+ * the promiscuous mode. The HWRM should accept any function to
+ * set up promiscuous mode. The HWRM shall follow the semantics
+ * below for the promiscuous mode support. # When partitioning
+ * is not enabled on a port (i.e. single PF on the port), then
+ * the PF shall be allowed to be in the promiscuous mode. When
+ * the PF is in the promiscuous mode, then it shall receive all
+ * host bound traffic on that port. # When partitioning is
+ * enabled on a port (i.e. multiple PFs per port) and a PF on
+ * that port is in the promiscuous mode, then the PF receives
+ * all traffic within that partition as identified by a unique
+ * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
+ * for the PF is specified, then the setting of promiscuous mode
+ * on that PF shall result in the PF receiving all host bound
+ * traffic with matching outer VLAN. # A VF shall can be set in
+ * the promiscuous mode. In the promiscuous mode, the VF does
+ * not receive any traffic unless a unique outer VLAN for the VF
+ * is specified. If a unique outer VLAN for the VF is specified,
+ * then the setting of promiscuous mode on that VF shall result
+ * in the VF receiving all host bound traffic with the matching
+ * outer VLAN. # The HWRM shall allow the setting of promiscuous
+ * mode on a function independently from the promiscuous mode
+ * settings on other functions.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
/*
- * If this flag is set, the corresponding RX filters shall be set up to
- * cover multicast/broadcast filters for the outermost Layer 2
- * destination MAC address field.
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the outermost
+ * Layer 2 destination MAC address field.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
- uint32_t mask;
-
- /* This is the address for mcast address tbl. */
- uint64_t mc_tbl_addr;
-
/*
- * This value indicates how many entries in mc_tbl are valid. Each entry
- * is 6 bytes.
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the VLAN-
+ * tagged packets that match the TPID and VID fields of VLAN
+ * tags in the VLAN tag table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets that match the TPID
+ * and VID fields of VLAN tags in the VLAN tag table specified
+ * in this command.
*/
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets matching any VLAN tag.
+ * If this flag is set, then the HWRM shall ignore VLAN tags
+ * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
+ * and anyvlan_nonvlan flags is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl. The HWRM client shall
+ * set at most one flag out of vlanonly, vlan_nonvlan, and
+ * anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN UINT32_C(0x100)
+ uint64_t mc_tbl_addr;
+ /* This is the address for mcast address tbl. */
uint32_t num_mc_entries;
-
+ /*
+ * This value indicates how many entries in mc_tbl are valid.
+ * Each entry is 6 bytes.
+ */
uint32_t unused_0;
+ uint64_t vlan_tag_tbl_addr;
+ /*
+ * This is the address for VLAN tag table. Each VLAN entry in
+ * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
+ * and VID fields in network byte order.
+ */
+ uint32_t num_vlan_tags;
+ /*
+ * This value indicates how many entries in vlan_tag_tbl are
+ * valid. Each entry is 4 bytes.
+ */
+ uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_set_rx_mask_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
+ /* This field returns the type of original request. */
uint16_t seq_id;
-
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- uint16_t resp_len;
-
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_exec_fwd_resp */
git.droids-corp.org / dpdk.git / commitdiff