#include "mlx5_autoconf.h"
#include "mlx5_mr.h"
#include "mlx5_flow.h"
+#include "mlx5_devx.h"
+
+#define MLX5_TAGS_HLIST_ARRAY_SIZE 8192
static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
return err;
}
+/**
+ * Initialize DR related data within private structure.
+ * Routine checks the reference counter and does actual
+ * resources creation/initialization only if counter is zero.
+ *
+ * @param[in] priv
+ * Pointer to the private device data structure.
+ *
+ * @return
+ * Zero on success, positive error code otherwise.
+ */
+static int
+mlx5_alloc_shared_dr(struct mlx5_priv *priv)
+{
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ int err = 0;
+
+ if (!sh->flow_tbls)
+ err = mlx5_alloc_table_hash_list(priv);
+ else
+ DRV_LOG(DEBUG, "sh->flow_tbls[%p] already created, reuse\n",
+ (void *)sh->flow_tbls);
+ return err;
+}
+/**
+ * Destroy DR related data within private structure.
+ *
+ * @param[in] priv
+ * Pointer to the private device data structure.
+ */
+void
+mlx5_os_free_shared_dr(struct mlx5_priv *priv)
+{
+ mlx5_free_table_hash_list(priv);
+}
+
/**
* Set the completion channel file descriptor interrupt as non-blocking.
* Currently it has no support under Windows.
return err;
}
+/**
+ * DV flow counter mode detect and config.
+ *
+ * @param dev
+ * Pointer to rte_eth_dev structure.
+ *
+ */
+static void
+mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
+{
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ bool fallback;
+
+#ifndef HAVE_IBV_DEVX_ASYNC
+ fallback = true;
+#else
+ fallback = false;
+ if (!priv->config.devx || !priv->config.dv_flow_en ||
+ !priv->config.hca_attr.flow_counters_dump ||
+ !(priv->config.hca_attr.flow_counter_bulk_alloc_bitmap & 0x4) ||
+ (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
+ fallback = true;
+#endif
+ if (fallback)
+ DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
+ "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
+ priv->config.hca_attr.flow_counters_dump,
+ priv->config.hca_attr.flow_counter_bulk_alloc_bitmap);
+ /* Initialize fallback mode only on the port initializes sh. */
+ if (sh->refcnt == 1)
+ sh->cmng.counter_fallback = fallback;
+ else if (fallback != sh->cmng.counter_fallback)
+ DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
+ "with others:%d.", PORT_ID(priv), fallback);
+#endif
+}
+
/**
* Spawn an Ethernet device from Verbs information.
*
* Device configuration parameters.
*
* @return
- * NULL pointer. Operation is not supported and rte_errno is set to ENOTSUP.
+ * A valid Ethernet device object on success, NULL otherwise and rte_errno
+ * is set. The following errors are defined:
+ *
+ * EEXIST: device is already spawned
*/
static struct rte_eth_dev *
mlx5_dev_spawn(struct rte_device *dpdk_dev,
struct mlx5_dev_spawn_data *spawn,
struct mlx5_dev_config *config)
{
- (void)dpdk_dev;
- (void)spawn;
- (void)config;
- rte_errno = -ENOTSUP;
+ const struct mlx5_switch_info *switch_info = &spawn->info;
+ struct mlx5_dev_ctx_shared *sh = NULL;
+ struct mlx5_dev_attr device_attr;
+ struct rte_eth_dev *eth_dev = NULL;
+ struct mlx5_priv *priv = NULL;
+ int err = 0;
+ unsigned int cqe_comp;
+ unsigned int cqe_pad = 0;
+ struct rte_ether_addr mac;
+ char name[RTE_ETH_NAME_MAX_LEN];
+ int own_domain_id = 0;
+ uint16_t port_id;
+
+ /* Build device name. */
+ strlcpy(name, dpdk_dev->name, sizeof(name));
+ /* check if the device is already spawned */
+ if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
+ rte_errno = EEXIST;
+ return NULL;
+ }
+ DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
+ /*
+ * Some parameters are needed in advance to create device context. We
+ * process the devargs here to get ones, and later process devargs
+ * again to override some hardware settings.
+ */
+ err = mlx5_args(config, dpdk_dev->devargs);
+ if (err) {
+ err = rte_errno;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ goto error;
+ }
+ mlx5_malloc_mem_select(config->sys_mem_en);
+ sh = mlx5_alloc_shared_dev_ctx(spawn, config);
+ if (!sh)
+ return NULL;
+ config->devx = sh->devx;
+ /* Initialize the shutdown event in mlx5_dev_spawn to
+ * support mlx5_is_removed for Windows.
+ */
+ err = mlx5_glue->devx_init_showdown_event(sh->ctx);
+ if (err) {
+ DRV_LOG(ERR, "failed to init showdown event: %s",
+ strerror(errno));
+ goto error;
+ }
+ DRV_LOG(DEBUG, "MPW isn't supported");
+ mlx5_os_get_dev_attr(sh->ctx, &device_attr);
+ config->swp = 0;
+ config->ind_table_max_size =
+ sh->device_attr.max_rwq_indirection_table_size;
+ if (RTE_CACHE_LINE_SIZE == 128 &&
+ !(device_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
+ cqe_comp = 0;
+ else
+ cqe_comp = 1;
+ config->cqe_comp = cqe_comp;
+ DRV_LOG(DEBUG, "tunnel offloading is not supported");
+ config->tunnel_en = 0;
+ DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is no supported");
+ config->mpls_en = 0;
+ /* Allocate private eth device data. */
+ priv = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+ if (priv == NULL) {
+ DRV_LOG(ERR, "priv allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ priv->sh = sh;
+ priv->dev_port = spawn->phys_port;
+ priv->pci_dev = spawn->pci_dev;
+ priv->mtu = RTE_ETHER_MTU;
+ priv->mp_id.port_id = port_id;
+ strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
+ priv->representor = !!switch_info->representor;
+ priv->master = !!switch_info->master;
+ priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
+ priv->vport_meta_tag = 0;
+ priv->vport_meta_mask = 0;
+ priv->pf_bond = spawn->pf_bond;
+ priv->vport_id = -1;
+ /* representor_id field keeps the unmodified VF index. */
+ priv->representor_id = -1;
+ /*
+ * Look for sibling devices in order to reuse their switch domain
+ * if any, otherwise allocate one.
+ */
+ MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+ const struct mlx5_priv *opriv =
+ rte_eth_devices[port_id].data->dev_private;
+
+ if (!opriv ||
+ opriv->sh != priv->sh ||
+ opriv->domain_id ==
+ RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
+ continue;
+ priv->domain_id = opriv->domain_id;
+ break;
+ }
+ if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
+ err = rte_eth_switch_domain_alloc(&priv->domain_id);
+ if (err) {
+ err = rte_errno;
+ DRV_LOG(ERR, "unable to allocate switch domain: %s",
+ strerror(rte_errno));
+ goto error;
+ }
+ own_domain_id = 1;
+ }
+ /* Override some values set by hardware configuration. */
+ mlx5_args(config, dpdk_dev->devargs);
+ err = mlx5_dev_check_sibling_config(priv, config);
+ if (err)
+ goto error;
+ config->hw_csum = !!(sh->device_attr.device_cap_flags_ex &
+ IBV_DEVICE_RAW_IP_CSUM);
+ DRV_LOG(DEBUG, "checksum offloading is %ssupported",
+ (config->hw_csum ? "" : "not "));
+ DRV_LOG(DEBUG, "counters are not supported");
+ config->ind_table_max_size =
+ sh->device_attr.max_rwq_indirection_table_size;
+ /*
+ * Remove this check once DPDK supports larger/variable
+ * indirection tables.
+ */
+ if (config->ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
+ config->ind_table_max_size = ETH_RSS_RETA_SIZE_512;
+ DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
+ config->ind_table_max_size);
+ config->hw_vlan_strip = !!(sh->device_attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
+ DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
+ (config->hw_vlan_strip ? "" : "not "));
+ config->hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_SCATTER_FCS);
+ if (config->hw_padding) {
+ DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
+ config->hw_padding = 0;
+ }
+ config->tso = (sh->device_attr.max_tso > 0 &&
+ (sh->device_attr.tso_supported_qpts &
+ (1 << IBV_QPT_RAW_PACKET)));
+ if (config->tso)
+ config->tso_max_payload_sz = sh->device_attr.max_tso;
+ DRV_LOG(DEBUG, "%sMPS is %s.",
+ config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
+ config->mps == MLX5_MPW ? "legacy " : "",
+ config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+ if (config->cqe_comp && !cqe_comp) {
+ DRV_LOG(WARNING, "Rx CQE compression isn't supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_pad && !cqe_pad) {
+ DRV_LOG(WARNING, "Rx CQE padding isn't supported.");
+ config->cqe_pad = 0;
+ } else if (config->cqe_pad) {
+ DRV_LOG(INFO, "Rx CQE padding is enabled.");
+ }
+ if (config->devx) {
+ err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
+ if (err) {
+ err = -err;
+ goto error;
+ }
+ /* Check relax ordering support. */
+ sh->cmng.relaxed_ordering_read = 0;
+ sh->cmng.relaxed_ordering_write = 0;
+ if (!haswell_broadwell_cpu) {
+ sh->cmng.relaxed_ordering_write =
+ config->hca_attr.relaxed_ordering_write;
+ sh->cmng.relaxed_ordering_read =
+ config->hca_attr.relaxed_ordering_read;
+ }
+ }
+ if (config->devx) {
+ uint32_t reg[MLX5_ST_SZ_DW(register_mtutc)];
+
+ err = config->hca_attr.access_register_user ?
+ mlx5_devx_cmd_register_read
+ (sh->ctx, MLX5_REGISTER_ID_MTUTC, 0,
+ reg, MLX5_ST_SZ_DW(register_mtutc)) : ENOTSUP;
+ if (!err) {
+ uint32_t ts_mode;
+
+ /* MTUTC register is read successfully. */
+ ts_mode = MLX5_GET(register_mtutc, reg,
+ time_stamp_mode);
+ if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
+ config->rt_timestamp = 1;
+ } else {
+ /* Kernel does not support register reading. */
+ if (config->hca_attr.dev_freq_khz ==
+ (NS_PER_S / MS_PER_S))
+ config->rt_timestamp = 1;
+ }
+ }
+ if (config->mprq.enabled) {
+ DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
+ config->mprq.enabled = 0;
+ }
+ if (config->max_dump_files_num == 0)
+ config->max_dump_files_num = 128;
+ eth_dev = rte_eth_dev_allocate(name);
+ if (eth_dev == NULL) {
+ DRV_LOG(ERR, "can not allocate rte ethdev");
+ err = ENOMEM;
+ goto error;
+ }
+ if (priv->representor) {
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
+ eth_dev->data->representor_id = priv->representor_id;
+ }
+ /*
+ * Store associated network device interface index. This index
+ * is permanent throughout the lifetime of device. So, we may store
+ * the ifindex here and use the cached value further.
+ */
+ MLX5_ASSERT(spawn->ifindex);
+ priv->if_index = spawn->ifindex;
+ eth_dev->data->dev_private = priv;
+ priv->dev_data = eth_dev->data;
+ eth_dev->data->mac_addrs = priv->mac;
+ eth_dev->device = dpdk_dev;
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
+ /* Configure the first MAC address by default. */
+ if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
+ DRV_LOG(ERR,
+ "port %u cannot get MAC address, is mlx5_en"
+ " loaded? (errno: %s).",
+ eth_dev->data->port_id, strerror(rte_errno));
+ err = ENODEV;
+ goto error;
+ }
+ DRV_LOG(INFO,
+ "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ eth_dev->data->port_id,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+#ifdef RTE_LIBRTE_MLX5_DEBUG
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (mlx5_get_ifname(eth_dev, &ifname) == 0)
+ DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
+ eth_dev->data->port_id, ifname);
+ else
+ DRV_LOG(DEBUG, "port %u ifname is unknown.",
+ eth_dev->data->port_id);
+ }
+#endif
+ /* Get actual MTU if possible. */
+ err = mlx5_get_mtu(eth_dev, &priv->mtu);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u MTU is %u.", eth_dev->data->port_id,
+ priv->mtu);
+ /* Initialize burst functions to prevent crashes before link-up. */
+ eth_dev->rx_pkt_burst = removed_rx_burst;
+ eth_dev->tx_pkt_burst = removed_tx_burst;
+ eth_dev->dev_ops = &mlx5_os_dev_ops;
+ eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
+ eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
+ eth_dev->rx_queue_count = mlx5_rx_queue_count;
+ /* Register MAC address. */
+ claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
+ priv->flows = 0;
+ priv->ctrl_flows = 0;
+ TAILQ_INIT(&priv->flow_meters);
+ TAILQ_INIT(&priv->flow_meter_profiles);
+ /* Bring Ethernet device up. */
+ DRV_LOG(DEBUG, "port %u forcing Ethernet interface up.",
+ eth_dev->data->port_id);
+ /* nl calls are unsupported - set to -1 not to fail on release */
+ priv->nl_socket_rdma = -1;
+ priv->nl_socket_route = -1;
+ mlx5_set_link_up(eth_dev);
+ /*
+ * Even though the interrupt handler is not installed yet,
+ * interrupts will still trigger on the async_fd from
+ * Verbs context returned by ibv_open_device().
+ */
+ mlx5_link_update(eth_dev, 0);
+ config->dv_esw_en = 0;
+ /* Detect minimal data bytes to inline. */
+ mlx5_set_min_inline(spawn, config);
+ /* Store device configuration on private structure. */
+ priv->config = *config;
+ /* Create context for virtual machine VLAN workaround. */
+ priv->vmwa_context = NULL;
+ if (config->dv_flow_en) {
+ err = mlx5_alloc_shared_dr(priv);
+ if (err)
+ goto error;
+ }
+ /* No supported flow priority number detection. */
+ priv->config.flow_prio = -1;
+ if (!priv->config.dv_esw_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(WARNING, "metadata mode %u is not supported "
+ "(no E-Switch)", priv->config.dv_xmeta_en);
+ priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+ }
+ mlx5_set_metadata_mask(eth_dev);
+ if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ !priv->sh->dv_regc0_mask) {
+ DRV_LOG(ERR, "metadata mode %u is not supported "
+ "(no metadata reg_c[0] is available).",
+ priv->config.dv_xmeta_en);
+ err = ENOTSUP;
+ goto error;
+ }
+ mlx5_cache_list_init(&priv->hrxqs, "hrxq", 0, eth_dev,
+ mlx5_hrxq_create_cb,
+ mlx5_hrxq_match_cb,
+ mlx5_hrxq_remove_cb);
+ /* Query availability of metadata reg_c's. */
+ err = mlx5_flow_discover_mreg_c(eth_dev);
+ if (err < 0) {
+ err = -err;
+ goto error;
+ }
+ if (!mlx5_flow_ext_mreg_supported(eth_dev)) {
+ DRV_LOG(DEBUG,
+ "port %u extensive metadata register is not supported.",
+ eth_dev->data->port_id);
+ if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(ERR, "metadata mode %u is not supported "
+ "(no metadata registers available).",
+ priv->config.dv_xmeta_en);
+ err = ENOTSUP;
+ goto error;
+ }
+ }
+ if (config->devx && config->dv_flow_en) {
+ priv->obj_ops = devx_obj_ops;
+ } else {
+ DRV_LOG(ERR, "Flow mode %u is not supported "
+ "(Windows flow must be DevX with DV flow enabled).",
+ priv->config.dv_flow_en);
+ err = ENOTSUP;
+ goto error;
+ }
+ mlx5_flow_counter_mode_config(eth_dev);
+ return eth_dev;
+error:
+ if (priv) {
+ if (own_domain_id)
+ claim_zero(rte_eth_switch_domain_free(priv->domain_id));
+ mlx5_free(priv);
+ if (eth_dev != NULL)
+ eth_dev->data->dev_private = NULL;
+ }
+ if (eth_dev != NULL) {
+ /* mac_addrs must not be freed alone because part of
+ * dev_private
+ **/
+ eth_dev->data->mac_addrs = NULL;
+ rte_eth_dev_release_port(eth_dev);
+ }
+ if (sh)
+ mlx5_free_shared_dev_ctx(sh);
+ MLX5_ASSERT(err > 0);
+ rte_errno = err;
return NULL;
}
git.droids-corp.org / dpdk.git / commitdiff