net/i40e: add module EEPROM callbacks for i40e

Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

diff --git a/doc/guides/nics/features/i40e.ini b/doc/guides/nics/features/i40e.ini
index 02087bc..16eab7f 100644 (file)
--- a/doc/guides/nics/features/i40e.ini
+++ b/doc/guides/nics/features/i40e.ini
@@ -46,6 +46,7 @@ Tx descriptor status = Y
 Basic stats          = Y
 Extended stats       = Y
 FW version           = Y
+Module EEPROM dump   = Y
 Multiprocess aware   = Y
 BSD nic_uio          = Y
 Linux UIO            = Y

diff --git a/doc/guides/nics/features/i40e_vec.ini b/doc/guides/nics/features/i40e_vec.ini
index 7d7b3a9..c65e8b0 100644 (file)
--- a/doc/guides/nics/features/i40e_vec.ini
+++ b/doc/guides/nics/features/i40e_vec.ini
@@ -34,6 +34,7 @@ Rx descriptor status = Y
 Tx descriptor status = Y
 Basic stats          = Y
 Extended stats       = Y
+Module EEPROM dump   = Y
 Multiprocess aware   = Y
 BSD nic_uio          = Y
 Linux UIO            = Y

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 2fc98a7..78f2be7 100644 (file)
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -369,6 +369,11 @@ static int i40e_get_eeprom_length(struct rte_eth_dev *dev);
 static int i40e_get_eeprom(struct rte_eth_dev *dev,
                           struct rte_dev_eeprom_info *eeprom);
 
+static int i40e_get_module_info(struct rte_eth_dev *dev,
+                               struct rte_eth_dev_module_info *modinfo);
+static int i40e_get_module_eeprom(struct rte_eth_dev *dev,
+                                 struct rte_dev_eeprom_info *info);
+
 static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
                                      struct ether_addr *mac_addr);
 
@@ -489,6 +494,8 @@ static const struct eth_dev_ops i40e_eth_dev_ops = {
        .get_reg                      = i40e_get_regs,
        .get_eeprom_length            = i40e_get_eeprom_length,
        .get_eeprom                   = i40e_get_eeprom,
+       .get_module_info              = i40e_get_module_info,
+       .get_module_eeprom            = i40e_get_module_eeprom,
        .mac_addr_set                 = i40e_set_default_mac_addr,
        .mtu_set                      = i40e_dev_mtu_set,
        .tm_ops_get                   = i40e_tm_ops_get,
@@ -11331,6 +11338,146 @@ static int i40e_get_eeprom(struct rte_eth_dev *dev,
        return 0;
 }
 
+static int i40e_get_module_info(struct rte_eth_dev *dev,
+                               struct rte_eth_dev_module_info *modinfo)
+{
+       struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+       uint32_t sff8472_comp = 0;
+       uint32_t sff8472_swap = 0;
+       uint32_t sff8636_rev = 0;
+       i40e_status status;
+       uint32_t type = 0;
+
+       /* Check if firmware supports reading module EEPROM. */
+       if (!(hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE)) {
+               PMD_DRV_LOG(ERR,
+                           "Module EEPROM memory read not supported. "
+                           "Please update the NVM image.\n");
+               return -EINVAL;
+       }
+
+       status = i40e_update_link_info(hw);
+       if (status)
+               return -EIO;
+
+       if (hw->phy.link_info.phy_type == I40E_PHY_TYPE_EMPTY) {
+               PMD_DRV_LOG(ERR,
+                           "Cannot read module EEPROM memory. "
+                           "No module connected.\n");
+               return -EINVAL;
+       }
+
+       type = hw->phy.link_info.module_type[0];
+
+       switch (type) {
+       case I40E_MODULE_TYPE_SFP:
+               status = i40e_aq_get_phy_register(hw,
+                               I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+                               I40E_I2C_EEPROM_DEV_ADDR,
+                               I40E_MODULE_SFF_8472_COMP,
+                               &sff8472_comp, NULL);
+               if (status)
+                       return -EIO;
+
+               status = i40e_aq_get_phy_register(hw,
+                               I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+                               I40E_I2C_EEPROM_DEV_ADDR,
+                               I40E_MODULE_SFF_8472_SWAP,
+                               &sff8472_swap, NULL);
+               if (status)
+                       return -EIO;
+
+               /* Check if the module requires address swap to access
+                * the other EEPROM memory page.
+                */
+               if (sff8472_swap & I40E_MODULE_SFF_ADDR_MODE) {
+                       PMD_DRV_LOG(WARNING,
+                                   "Module address swap to access "
+                                   "page 0xA2 is not supported.\n");
+                       modinfo->type = RTE_ETH_MODULE_SFF_8079;
+                       modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+               } else if (sff8472_comp == 0x00) {
+                       /* Module is not SFF-8472 compliant */
+                       modinfo->type = RTE_ETH_MODULE_SFF_8079;
+                       modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+               } else {
+                       modinfo->type = RTE_ETH_MODULE_SFF_8472;
+                       modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+               }
+               break;
+       case I40E_MODULE_TYPE_QSFP_PLUS:
+               /* Read from memory page 0. */
+               status = i40e_aq_get_phy_register(hw,
+                               I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+                               0,
+                               I40E_MODULE_REVISION_ADDR,
+                               &sff8636_rev, NULL);
+               if (status)
+                       return -EIO;
+               /* Determine revision compliance byte */
+               if (sff8636_rev > 0x02) {
+                       /* Module is SFF-8636 compliant */
+                       modinfo->type = RTE_ETH_MODULE_SFF_8636;
+                       modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+               } else {
+                       modinfo->type = RTE_ETH_MODULE_SFF_8436;
+                       modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+               }
+               break;
+       case I40E_MODULE_TYPE_QSFP28:
+               modinfo->type = RTE_ETH_MODULE_SFF_8636;
+               modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+               break;
+       default:
+               PMD_DRV_LOG(ERR, "Module type unrecognized\n");
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int i40e_get_module_eeprom(struct rte_eth_dev *dev,
+                                 struct rte_dev_eeprom_info *info)
+{
+       struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+       bool is_sfp = false;
+       i40e_status status;
+       uint8_t *data = info->data;
+       uint32_t value = 0;
+       uint32_t i;
+
+       if (!info || !info->length || !data)
+               return -EINVAL;
+
+       if (hw->phy.link_info.module_type[0] == I40E_MODULE_TYPE_SFP)
+               is_sfp = true;
+
+       for (i = 0; i < info->length; i++) {
+               u32 offset = i + info->offset;
+               u32 addr = is_sfp ? I40E_I2C_EEPROM_DEV_ADDR : 0;
+
+               /* Check if we need to access the other memory page */
+               if (is_sfp) {
+                       if (offset >= RTE_ETH_MODULE_SFF_8079_LEN) {
+                               offset -= RTE_ETH_MODULE_SFF_8079_LEN;
+                               addr = I40E_I2C_EEPROM_DEV_ADDR2;
+                       }
+               } else {
+                       while (offset >= RTE_ETH_MODULE_SFF_8436_LEN) {
+                               /* Compute memory page number and offset. */
+                               offset -= RTE_ETH_MODULE_SFF_8436_LEN / 2;
+                               addr++;
+                       }
+               }
+               status = i40e_aq_get_phy_register(hw,
+                               I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+                               addr, offset, &value, NULL);
+               if (status)
+                       return -EIO;
+               data[i] = (uint8_t)value;
+       }
+       return 0;
+}
+
 static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
                                     struct ether_addr *mac_addr)
 {