net/axgbe: add a HW quirk for register definitions

V1000/R1000 processors are using the same PCI ids for the network
device as SNOWYOWL processor but has altered register definitions
for determining the window settings for the indirect PCS access.
Add support to check for this hardware and if found use the new
register values.

Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index 99fa92d..fdb037d 100644 (file)
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -841,6 +841,8 @@
 #define PCS_V1_WINDOW_SELECT           0x03fc
 #define PCS_V2_WINDOW_DEF              0x9060
 #define PCS_V2_WINDOW_SELECT           0x9064
+#define PCS_V2_RV_WINDOW_DEF           0x1060
+#define PCS_V2_RV_WINDOW_SELECT                0x1064
 
 /* PCS register entry bit positions and sizes */
 #define PCS_V2_WINDOW_DEF_OFFSET_INDEX 6

diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index 750a768..d0b6f09 100644 (file)
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -99,6 +99,7 @@ static const struct axgbe_xstats axgbe_xstats_strings[] = {
 
 /* The set of PCI devices this driver supports */
 #define AMD_PCI_VENDOR_ID       0x1022
+#define AMD_PCI_RV_ROOT_COMPLEX_ID     0x15d0
 #define AMD_PCI_AXGBE_DEVICE_V2A 0x1458
 #define AMD_PCI_AXGBE_DEVICE_V2B 0x1459
 
@@ -982,6 +983,30 @@ static void axgbe_default_config(struct axgbe_port *pdata)
        pdata->power_down = 0;
 }
 
+static int
+pci_device_cmp(const struct rte_device *dev, const void *_pci_id)
+{
+       const struct rte_pci_device *pdev = RTE_DEV_TO_PCI_CONST(dev);
+       const struct rte_pci_id *pcid = _pci_id;
+
+       if (pdev->id.vendor_id == AMD_PCI_VENDOR_ID &&
+                       pdev->id.device_id == pcid->device_id)
+               return 0;
+       return 1;
+}
+
+static bool
+pci_search_device(int device_id)
+{
+       struct rte_bus *pci_bus;
+       struct rte_pci_id dev_id;
+
+       dev_id.device_id = device_id;
+       pci_bus = rte_bus_find_by_name("pci");
+       return (pci_bus != NULL) &&
+               (pci_bus->find_device(NULL, pci_device_cmp, &dev_id) != NULL);
+}
+
 /*
  * It returns 0 on success.
  */
@@ -1013,6 +1038,17 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
        pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
        pdata->pci_dev = pci_dev;
 
+       /*
+        * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE
+        */
+       if (pci_search_device(AMD_PCI_RV_ROOT_COMPLEX_ID)) {
+               pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF;
+               pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT;
+       } else {
+               pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
+               pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;
+       }
+
        pdata->xgmac_regs =
                (void *)pci_dev->mem_resource[AXGBE_AXGMAC_BAR].addr;
        pdata->xprop_regs = (void *)((uint8_t *)pdata->xgmac_regs
@@ -1028,14 +1064,13 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
                pdata->vdata = &axgbe_v2b;
 
        /* Configure the PCS indirect addressing support */
-       reg = XPCS32_IOREAD(pdata, PCS_V2_WINDOW_DEF);
+       reg = XPCS32_IOREAD(pdata, pdata->xpcs_window_def_reg);
        pdata->xpcs_window = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, OFFSET);
        pdata->xpcs_window <<= 6;
        pdata->xpcs_window_size = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, SIZE);
        pdata->xpcs_window_size = 1 << (pdata->xpcs_window_size + 7);
        pdata->xpcs_window_mask = pdata->xpcs_window_size - 1;
-       pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
-       pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;
+
        PMD_INIT_LOG(DEBUG,
                     "xpcs window :%x, size :%x, mask :%x ", pdata->xpcs_window,
                     pdata->xpcs_window_size, pdata->xpcs_window_mask);