}
rte_spinlock_unlock(&rte_eth_dev_cb_lock);
}
+
+#ifdef RTE_NEXT_ABI
+int
+rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
+{
+ uint32_t vec;
+ struct rte_eth_dev *dev;
+ struct rte_intr_handle *intr_handle;
+ uint16_t qid;
+ int rc;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%u\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ intr_handle = &dev->pci_dev->intr_handle;
+ if (!intr_handle->intr_vec) {
+ PMD_DEBUG_TRACE("RX Intr vector unset\n");
+ return -EPERM;
+ }
+
+ for (qid = 0; qid < dev->data->nb_rx_queues; qid++) {
+ vec = intr_handle->intr_vec[qid];
+ rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec, data);
+ if (rc && rc != -EEXIST) {
+ PMD_DEBUG_TRACE("p %u q %u rx ctl error"
+ " op %d epfd %d vec %u\n",
+ port_id, qid, op, epfd, vec);
+ }
+ }
+
+ return 0;
+}
+
+int
+rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+ int epfd, int op, void *data)
+{
+ uint32_t vec;
+ struct rte_eth_dev *dev;
+ struct rte_intr_handle *intr_handle;
+ int rc;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%u\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ if (queue_id >= dev->data->nb_rx_queues) {
+ PMD_DEBUG_TRACE("Invalid RX queue_id=%u\n", queue_id);
+ return -EINVAL;
+ }
+
+ intr_handle = &dev->pci_dev->intr_handle;
+ if (!intr_handle->intr_vec) {
+ PMD_DEBUG_TRACE("RX Intr vector unset\n");
+ return -EPERM;
+ }
+
+ vec = intr_handle->intr_vec[queue_id];
+ rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec, data);
+ if (rc && rc != -EEXIST) {
+ PMD_DEBUG_TRACE("p %u q %u rx ctl error"
+ " op %d epfd %d vec %u\n",
+ port_id, queue_id, op, epfd, vec);
+ return rc;
+ }
+
+ return 0;
+}
+
+int
+rte_eth_dev_rx_intr_enable(uint8_t port_id,
+ uint16_t queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable, -ENOTSUP);
+ return (*dev->dev_ops->rx_queue_intr_enable)(dev, queue_id);
+}
+
+int
+rte_eth_dev_rx_intr_disable(uint8_t port_id,
+ uint16_t queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
+ return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
+}
+#else
+int
+rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id)
+{
+ RTE_SET_USED(port_id);
+ RTE_SET_USED(queue_id);
+ return -ENOTSUP;
+}
+
+int
+rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id)
+{
+ RTE_SET_USED(port_id);
+ RTE_SET_USED(queue_id);
+ return -ENOTSUP;
+}
+
+int
+rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
+{
+ RTE_SET_USED(port_id);
+ RTE_SET_USED(epfd);
+ RTE_SET_USED(op);
+ RTE_SET_USED(data);
+ return -1;
+}
+
+int
+rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+ int epfd, int op, void *data)
+{
+ RTE_SET_USED(port_id);
+ RTE_SET_USED(queue_id);
+ RTE_SET_USED(epfd);
+ RTE_SET_USED(op);
+ RTE_SET_USED(data);
+ return -1;
+}
+#endif
+
#ifdef RTE_NIC_BYPASS
int rte_eth_dev_bypass_init(uint8_t port_id)
{
struct rte_intr_conf {
/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
uint16_t lsc;
+#ifdef RTE_NEXT_ABI
+ /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+ uint16_t rxq;
+#endif
};
/**
const struct rte_eth_txconf *tx_conf);
/**< @internal Setup a transmit queue of an Ethernet device. */
+typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
+
typedef void (*eth_queue_release_t)(void *queue);
/**< @internal Release memory resources allocated by given RX/TX queue. */
eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
+#ifdef RTE_NEXT_ABI
+ /**< Enable Rx queue interrupt. */
+ eth_rx_enable_intr_t rx_queue_intr_enable;
+ /**< Disable Rx queue interrupt.*/
+ eth_rx_disable_intr_t rx_queue_intr_disable;
+#endif
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
enum rte_eth_event_type event);
+/**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when rx packect arrives.
+ *
+ * The rte_eth_dev_rx_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * RX Interrupt control per port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
+
+/**
+ * RX Interrupt control per queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+ int epfd, int op, void *data);
+
/**
* Turn on the LED on the Ethernet device.
* This function turns on the LED on the Ethernet device.
rte_eth_dev_get_reg_info;
rte_eth_dev_get_reg_length;
rte_eth_dev_is_valid_port;
+ rte_eth_dev_rx_intr_ctl;
+ rte_eth_dev_rx_intr_ctl_q;
+ rte_eth_dev_rx_intr_disable;
+ rte_eth_dev_rx_intr_enable;
rte_eth_dev_set_eeprom;
rte_eth_dev_set_mc_addr_list;
rte_eth_timesync_disable;