net/sfc: support loopback mode configuration

All loopback modes are listed in efx_loopback_type_t.
Available loopback modes are listed per link speed in
the enc_loopback_types member of the efx_nic_cfg_t.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index c170e36..abaed67 100644 (file)
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -88,6 +88,8 @@ SFC EFX PMD has support for:
 
 - Flow API
 
+- Loopback
+
 
 Non-supported Features
 ----------------------
@@ -98,8 +100,6 @@ The features not yet supported include:
 
 - Priority-based flow control
 
-- Loopback
-
 - Configurable RX CRC stripping (always stripped)
 
 - Header split on receive

diff --git a/drivers/net/sfc/efsys.h b/drivers/net/sfc/efsys.h
index 7eb2c3f..12f77dc 100644 (file)
--- a/drivers/net/sfc/efsys.h
+++ b/drivers/net/sfc/efsys.h
@@ -166,7 +166,7 @@ prefetch_read_once(const volatile void *addr)
 
 #define EFSYS_OPT_MAC_STATS 1
 
-#define EFSYS_OPT_LOOPBACK 0
+#define EFSYS_OPT_LOOPBACK 1
 
 #define EFSYS_OPT_MON_MCDI 0
 #define EFSYS_OPT_MON_STATS 0

diff --git a/drivers/net/sfc/sfc.c b/drivers/net/sfc/sfc.c
index 69abaff..716683b 100644 (file)
--- a/drivers/net/sfc/sfc.c
+++ b/drivers/net/sfc/sfc.c
@@ -123,10 +123,12 @@ sfc_check_conf(struct sfc_adapter *sa)
                rc = EINVAL;
        }
 
+#if !EFSYS_OPT_LOOPBACK
        if (conf->lpbk_mode != 0) {
                sfc_err(sa, "Loopback not supported");
                rc = EINVAL;
        }
+#endif
 
        if (conf->dcb_capability_en != 0) {
                sfc_err(sa, "Priority-based flow control not supported");

diff --git a/drivers/net/sfc/sfc_port.c b/drivers/net/sfc/sfc_port.c
index fd267e1..5cc3ad7 100644 (file)
--- a/drivers/net/sfc/sfc_port.c
+++ b/drivers/net/sfc/sfc_port.c
@@ -121,6 +121,28 @@ sfc_port_init_dev_link(struct sfc_adapter *sa)
        return 0;
 }
 
+#if EFSYS_OPT_LOOPBACK
+
+static efx_link_mode_t
+sfc_port_phy_caps_to_max_link_speed(uint32_t phy_caps)
+{
+       if (phy_caps & (1u << EFX_PHY_CAP_100000FDX))
+               return EFX_LINK_100000FDX;
+       if (phy_caps & (1u << EFX_PHY_CAP_50000FDX))
+               return EFX_LINK_50000FDX;
+       if (phy_caps & (1u << EFX_PHY_CAP_40000FDX))
+               return EFX_LINK_40000FDX;
+       if (phy_caps & (1u << EFX_PHY_CAP_25000FDX))
+               return EFX_LINK_25000FDX;
+       if (phy_caps & (1u << EFX_PHY_CAP_10000FDX))
+               return EFX_LINK_10000FDX;
+       if (phy_caps & (1u << EFX_PHY_CAP_1000FDX))
+               return EFX_LINK_1000FDX;
+       return EFX_LINK_UNKNOWN;
+}
+
+#endif
+
 int
 sfc_port_start(struct sfc_adapter *sa)
 {
@@ -143,6 +165,21 @@ sfc_port_start(struct sfc_adapter *sa)
        if (rc != 0)
                goto fail_port_init;
 
+#if EFSYS_OPT_LOOPBACK
+       if (sa->eth_dev->data->dev_conf.lpbk_mode != 0) {
+               efx_link_mode_t link_mode;
+
+               link_mode =
+                       sfc_port_phy_caps_to_max_link_speed(port->phy_adv_cap);
+               sfc_log_init(sa, "set loopback link_mode=%u type=%u", link_mode,
+                            sa->eth_dev->data->dev_conf.lpbk_mode);
+               rc = efx_port_loopback_set(sa->nic, link_mode,
+                       sa->eth_dev->data->dev_conf.lpbk_mode);
+               if (rc != 0)
+                       goto fail_loopback_set;
+       }
+#endif
+
        sfc_log_init(sa, "set flow control to %#x autoneg=%u",
                     port->flow_ctrl, port->flow_ctrl_autoneg);
        rc = efx_mac_fcntl_set(sa->nic, port->flow_ctrl,
@@ -268,6 +305,9 @@ fail_mac_addr_set:
 fail_mac_pdu_set:
 fail_phy_adv_cap_set:
 fail_mac_fcntl_set:
+#if EFSYS_OPT_LOOPBACK
+fail_loopback_set:
+#endif
        efx_port_fini(sa->nic);
 
 fail_port_init: