--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2016 6WIND S.A.
+ * Copyright 2016 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+
+#include <rte_errno.h>
+#include <rte_branch_prediction.h>
+#include "rte_ethdev.h"
+#include "rte_flow_driver.h"
+#include "rte_flow.h"
+
+/* Get generic flow operations structure from a port. */
+const struct rte_flow_ops *
+rte_flow_ops_get(uint8_t port_id, struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops;
+ int code;
+
+ if (unlikely(!rte_eth_dev_is_valid_port(port_id)))
+ code = ENODEV;
+ else if (unlikely(!dev->dev_ops->filter_ctrl ||
+ dev->dev_ops->filter_ctrl(dev,
+ RTE_ETH_FILTER_GENERIC,
+ RTE_ETH_FILTER_GET,
+ &ops) ||
+ !ops))
+ code = ENOSYS;
+ else
+ return ops;
+ rte_flow_error_set(error, code, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(code));
+ return NULL;
+}
+
+/* Check whether a flow rule can be created on a given port. */
+int
+rte_flow_validate(uint8_t port_id,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+ if (unlikely(!ops))
+ return -rte_errno;
+ if (likely(!!ops->validate))
+ return ops->validate(dev, attr, pattern, actions, error);
+ rte_flow_error_set(error, ENOSYS, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+ return -rte_errno;
+}
+
+/* Create a flow rule on a given port. */
+struct rte_flow *
+rte_flow_create(uint8_t port_id,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+
+ if (unlikely(!ops))
+ return NULL;
+ if (likely(!!ops->create))
+ return ops->create(dev, attr, pattern, actions, error);
+ rte_flow_error_set(error, ENOSYS, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+ return NULL;
+}
+
+/* Destroy a flow rule on a given port. */
+int
+rte_flow_destroy(uint8_t port_id,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+
+ if (unlikely(!ops))
+ return -rte_errno;
+ if (likely(!!ops->destroy))
+ return ops->destroy(dev, flow, error);
+ rte_flow_error_set(error, ENOSYS, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+ return -rte_errno;
+}
+
+/* Destroy all flow rules associated with a port. */
+int
+rte_flow_flush(uint8_t port_id,
+ struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+
+ if (unlikely(!ops))
+ return -rte_errno;
+ if (likely(!!ops->flush))
+ return ops->flush(dev, error);
+ rte_flow_error_set(error, ENOSYS, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+ return -rte_errno;
+}
+
+/* Query an existing flow rule. */
+int
+rte_flow_query(uint8_t port_id,
+ struct rte_flow *flow,
+ enum rte_flow_action_type action,
+ void *data,
+ struct rte_flow_error *error)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
+
+ if (!ops)
+ return -rte_errno;
+ if (likely(!!ops->query))
+ return ops->query(dev, flow, action, data, error);
+ rte_flow_error_set(error, ENOSYS, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, rte_strerror(ENOSYS));
+ return -rte_errno;
+}
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2016 6WIND S.A.
+ * Copyright 2016 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_FLOW_H_
+#define RTE_FLOW_H_
+
+/**
+ * @file
+ * RTE generic flow API
+ *
+ * This interface provides the ability to program packet matching and
+ * associated actions in hardware through flow rules.
+ */
+
+#include <rte_arp.h>
+#include <rte_ether.h>
+#include <rte_icmp.h>
+#include <rte_ip.h>
+#include <rte_sctp.h>
+#include <rte_tcp.h>
+#include <rte_udp.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Flow rule attributes.
+ *
+ * Priorities are set on two levels: per group and per rule within groups.
+ *
+ * Lower values denote higher priority, the highest priority for both levels
+ * is 0, so that a rule with priority 0 in group 8 is always matched after a
+ * rule with priority 8 in group 0.
+ *
+ * Although optional, applications are encouraged to group similar rules as
+ * much as possible to fully take advantage of hardware capabilities
+ * (e.g. optimized matching) and work around limitations (e.g. a single
+ * pattern type possibly allowed in a given group).
+ *
+ * Group and priority levels are arbitrary and up to the application, they
+ * do not need to be contiguous nor start from 0, however the maximum number
+ * varies between devices and may be affected by existing flow rules.
+ *
+ * If a packet is matched by several rules of a given group for a given
+ * priority level, the outcome is undefined. It can take any path, may be
+ * duplicated or even cause unrecoverable errors.
+ *
+ * Note that support for more than a single group and priority level is not
+ * guaranteed.
+ *
+ * Flow rules can apply to inbound and/or outbound traffic (ingress/egress).
+ *
+ * Several pattern items and actions are valid and can be used in both
+ * directions. Those valid for only one direction are described as such.
+ *
+ * At least one direction must be specified.
+ *
+ * Specifying both directions at once for a given rule is not recommended
+ * but may be valid in a few cases (e.g. shared counter).
+ */
+struct rte_flow_attr {
+ uint32_t group; /**< Priority group. */
+ uint32_t priority; /**< Priority level within group. */
+ uint32_t ingress:1; /**< Rule applies to ingress traffic. */
+ uint32_t egress:1; /**< Rule applies to egress traffic. */
+ uint32_t reserved:30; /**< Reserved, must be zero. */
+};
+
+/**
+ * Matching pattern item types.
+ *
+ * Pattern items fall in two categories:
+ *
+ * - Matching protocol headers and packet data (ANY, RAW, ETH, VLAN, IPV4,
+ * IPV6, ICMP, UDP, TCP, SCTP, VXLAN and so on), usually associated with a
+ * specification structure. These must be stacked in the same order as the
+ * protocol layers to match, starting from the lowest.
+ *
+ * - Matching meta-data or affecting pattern processing (END, VOID, INVERT,
+ * PF, VF, PORT and so on), often without a specification structure. Since
+ * they do not match packet contents, these can be specified anywhere
+ * within item lists without affecting others.
+ *
+ * See the description of individual types for more information. Those
+ * marked with [META] fall into the second category.
+ */
+enum rte_flow_item_type {
+ /**
+ * [META]
+ *
+ * End marker for item lists. Prevents further processing of items,
+ * thereby ending the pattern.
+ *
+ * No associated specification structure.
+ */
+ RTE_FLOW_ITEM_TYPE_END,
+
+ /**
+ * [META]
+ *
+ * Used as a placeholder for convenience. It is ignored and simply
+ * discarded by PMDs.
+ *
+ * No associated specification structure.
+ */
+ RTE_FLOW_ITEM_TYPE_VOID,
+
+ /**
+ * [META]
+ *
+ * Inverted matching, i.e. process packets that do not match the
+ * pattern.
+ *
+ * No associated specification structure.
+ */
+ RTE_FLOW_ITEM_TYPE_INVERT,
+
+ /**
+ * Matches any protocol in place of the current layer, a single ANY
+ * may also stand for several protocol layers.
+ *
+ * See struct rte_flow_item_any.
+ */
+ RTE_FLOW_ITEM_TYPE_ANY,
+
+ /**
+ * [META]
+ *
+ * Matches packets addressed to the physical function of the device.
+ *
+ * If the underlying device function differs from the one that would
+ * normally receive the matched traffic, specifying this item
+ * prevents it from reaching that device unless the flow rule
+ * contains a PF action. Packets are not duplicated between device
+ * instances by default.
+ *
+ * No associated specification structure.
+ */
+ RTE_FLOW_ITEM_TYPE_PF,
+
+ /**
+ * [META]
+ *
+ * Matches packets addressed to a virtual function ID of the device.
+ *
+ * If the underlying device function differs from the one that would
+ * normally receive the matched traffic, specifying this item
+ * prevents it from reaching that device unless the flow rule
+ * contains a VF action. Packets are not duplicated between device
+ * instances by default.
+ *
+ * See struct rte_flow_item_vf.
+ */
+ RTE_FLOW_ITEM_TYPE_VF,
+
+ /**
+ * [META]
+ *
+ * Matches packets coming from the specified physical port of the
+ * underlying device.
+ *
+ * The first PORT item overrides the physical port normally
+ * associated with the specified DPDK input port (port_id). This
+ * item can be provided several times to match additional physical
+ * ports.
+ *
+ * See struct rte_flow_item_port.
+ */
+ RTE_FLOW_ITEM_TYPE_PORT,
+
+ /**
+ * Matches a byte string of a given length at a given offset.
+ *
+ * See struct rte_flow_item_raw.
+ */
+ RTE_FLOW_ITEM_TYPE_RAW,
+
+ /**
+ * Matches an Ethernet header.
+ *
+ * See struct rte_flow_item_eth.
+ */
+ RTE_FLOW_ITEM_TYPE_ETH,
+
+ /**
+ * Matches an 802.1Q/ad VLAN tag.
+ *
+ * See struct rte_flow_item_vlan.
+ */
+ RTE_FLOW_ITEM_TYPE_VLAN,
+
+ /**
+ * Matches an IPv4 header.
+ *
+ * See struct rte_flow_item_ipv4.
+ */
+ RTE_FLOW_ITEM_TYPE_IPV4,
+
+ /**
+ * Matches an IPv6 header.
+ *
+ * See struct rte_flow_item_ipv6.
+ */
+ RTE_FLOW_ITEM_TYPE_IPV6,
+
+ /**
+ * Matches an ICMP header.
+ *
+ * See struct rte_flow_item_icmp.
+ */
+ RTE_FLOW_ITEM_TYPE_ICMP,
+
+ /**
+ * Matches a UDP header.
+ *
+ * See struct rte_flow_item_udp.
+ */
+ RTE_FLOW_ITEM_TYPE_UDP,
+
+ /**
+ * Matches a TCP header.
+ *
+ * See struct rte_flow_item_tcp.
+ */
+ RTE_FLOW_ITEM_TYPE_TCP,
+
+ /**
+ * Matches a SCTP header.
+ *
+ * See struct rte_flow_item_sctp.
+ */
+ RTE_FLOW_ITEM_TYPE_SCTP,
+
+ /**
+ * Matches a VXLAN header.
+ *
+ * See struct rte_flow_item_vxlan.
+ */
+ RTE_FLOW_ITEM_TYPE_VXLAN,
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_ANY
+ *
+ * Matches any protocol in place of the current layer, a single ANY may also
+ * stand for several protocol layers.
+ *
+ * This is usually specified as the first pattern item when looking for a
+ * protocol anywhere in a packet.
+ *
+ * A zeroed mask stands for any number of layers.
+ */
+struct rte_flow_item_any {
+ uint32_t num; /* Number of layers covered. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_VF
+ *
+ * Matches packets addressed to a virtual function ID of the device.
+ *
+ * If the underlying device function differs from the one that would
+ * normally receive the matched traffic, specifying this item prevents it
+ * from reaching that device unless the flow rule contains a VF
+ * action. Packets are not duplicated between device instances by default.
+ *
+ * - Likely to return an error or never match any traffic if this causes a
+ * VF device to match traffic addressed to a different VF.
+ * - Can be specified multiple times to match traffic addressed to several
+ * VF IDs.
+ * - Can be combined with a PF item to match both PF and VF traffic.
+ *
+ * A zeroed mask can be used to match any VF ID.
+ */
+struct rte_flow_item_vf {
+ uint32_t id; /**< Destination VF ID. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_PORT
+ *
+ * Matches packets coming from the specified physical port of the underlying
+ * device.
+ *
+ * The first PORT item overrides the physical port normally associated with
+ * the specified DPDK input port (port_id). This item can be provided
+ * several times to match additional physical ports.
+ *
+ * Note that physical ports are not necessarily tied to DPDK input ports
+ * (port_id) when those are not under DPDK control. Possible values are
+ * specific to each device, they are not necessarily indexed from zero and
+ * may not be contiguous.
+ *
+ * As a device property, the list of allowed values as well as the value
+ * associated with a port_id should be retrieved by other means.
+ *
+ * A zeroed mask can be used to match any port index.
+ */
+struct rte_flow_item_port {
+ uint32_t index; /**< Physical port index. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_RAW
+ *
+ * Matches a byte string of a given length at a given offset.
+ *
+ * Offset is either absolute (using the start of the packet) or relative to
+ * the end of the previous matched item in the stack, in which case negative
+ * values are allowed.
+ *
+ * If search is enabled, offset is used as the starting point. The search
+ * area can be delimited by setting limit to a nonzero value, which is the
+ * maximum number of bytes after offset where the pattern may start.
+ *
+ * Matching a zero-length pattern is allowed, doing so resets the relative
+ * offset for subsequent items.
+ *
+ * This type does not support ranges (struct rte_flow_item.last).
+ */
+struct rte_flow_item_raw {
+ uint32_t relative:1; /**< Look for pattern after the previous item. */
+ uint32_t search:1; /**< Search pattern from offset (see also limit). */
+ uint32_t reserved:30; /**< Reserved, must be set to zero. */
+ int32_t offset; /**< Absolute or relative offset for pattern. */
+ uint16_t limit; /**< Search area limit for start of pattern. */
+ uint16_t length; /**< Pattern length. */
+ uint8_t pattern[]; /**< Byte string to look for. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_ETH
+ *
+ * Matches an Ethernet header.
+ */
+struct rte_flow_item_eth {
+ struct ether_addr dst; /**< Destination MAC. */
+ struct ether_addr src; /**< Source MAC. */
+ uint16_t type; /**< EtherType. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_VLAN
+ *
+ * Matches an 802.1Q/ad VLAN tag.
+ *
+ * This type normally follows either RTE_FLOW_ITEM_TYPE_ETH or
+ * RTE_FLOW_ITEM_TYPE_VLAN.
+ */
+struct rte_flow_item_vlan {
+ uint16_t tpid; /**< Tag protocol identifier. */
+ uint16_t tci; /**< Tag control information. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_IPV4
+ *
+ * Matches an IPv4 header.
+ *
+ * Note: IPv4 options are handled by dedicated pattern items.
+ */
+struct rte_flow_item_ipv4 {
+ struct ipv4_hdr hdr; /**< IPv4 header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_IPV6.
+ *
+ * Matches an IPv6 header.
+ *
+ * Note: IPv6 options are handled by dedicated pattern items.
+ */
+struct rte_flow_item_ipv6 {
+ struct ipv6_hdr hdr; /**< IPv6 header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_ICMP.
+ *
+ * Matches an ICMP header.
+ */
+struct rte_flow_item_icmp {
+ struct icmp_hdr hdr; /**< ICMP header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_UDP.
+ *
+ * Matches a UDP header.
+ */
+struct rte_flow_item_udp {
+ struct udp_hdr hdr; /**< UDP header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_TCP.
+ *
+ * Matches a TCP header.
+ */
+struct rte_flow_item_tcp {
+ struct tcp_hdr hdr; /**< TCP header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_SCTP.
+ *
+ * Matches a SCTP header.
+ */
+struct rte_flow_item_sctp {
+ struct sctp_hdr hdr; /**< SCTP header definition. */
+};
+
+/**
+ * RTE_FLOW_ITEM_TYPE_VXLAN.
+ *
+ * Matches a VXLAN header (RFC 7348).
+ */
+struct rte_flow_item_vxlan {
+ uint8_t flags; /**< Normally 0x08 (I flag). */
+ uint8_t rsvd0[3]; /**< Reserved, normally 0x000000. */
+ uint8_t vni[3]; /**< VXLAN identifier. */
+ uint8_t rsvd1; /**< Reserved, normally 0x00. */
+};
+
+/**
+ * Matching pattern item definition.
+ *
+ * A pattern is formed by stacking items starting from the lowest protocol
+ * layer to match. This stacking restriction does not apply to meta items
+ * which can be placed anywhere in the stack without affecting the meaning
+ * of the resulting pattern.
+ *
+ * Patterns are terminated by END items.
+ *
+ * The spec field should be a valid pointer to a structure of the related
+ * item type. It may be set to NULL in many cases to use default values.
+ *
+ * Optionally, last can point to a structure of the same type to define an
+ * inclusive range. This is mostly supported by integer and address fields,
+ * may cause errors otherwise. Fields that do not support ranges must be set
+ * to 0 or to the same value as the corresponding fields in spec.
+ *
+ * By default all fields present in spec are considered relevant (see note
+ * below). This behavior can be altered by providing a mask structure of the
+ * same type with applicable bits set to one. It can also be used to
+ * partially filter out specific fields (e.g. as an alternate mean to match
+ * ranges of IP addresses).
+ *
+ * Mask is a simple bit-mask applied before interpreting the contents of
+ * spec and last, which may yield unexpected results if not used
+ * carefully. For example, if for an IPv4 address field, spec provides
+ * 10.1.2.3, last provides 10.3.4.5 and mask provides 255.255.0.0, the
+ * effective range becomes 10.1.0.0 to 10.3.255.255.
+ *
+ * Note: the defaults for data-matching items such as IPv4 when mask is not
+ * specified actually depend on the underlying implementation since only
+ * recognized fields can be taken into account.
+ */
+struct rte_flow_item {
+ enum rte_flow_item_type type; /**< Item type. */
+ const void *spec; /**< Pointer to item specification structure. */
+ const void *last; /**< Defines an inclusive range (spec to last). */
+ const void *mask; /**< Bit-mask applied to spec and last. */
+};
+
+/**
+ * Action types.
+ *
+ * Each possible action is represented by a type. Some have associated
+ * configuration structures. Several actions combined in a list can be
+ * affected to a flow rule. That list is not ordered.
+ *
+ * They fall in three categories:
+ *
+ * - Terminating actions (such as QUEUE, DROP, RSS, PF, VF) that prevent
+ * processing matched packets by subsequent flow rules, unless overridden
+ * with PASSTHRU.
+ *
+ * - Non terminating actions (PASSTHRU, DUP) that leave matched packets up
+ * for additional processing by subsequent flow rules.
+ *
+ * - Other non terminating meta actions that do not affect the fate of
+ * packets (END, VOID, MARK, FLAG, COUNT).
+ *
+ * When several actions are combined in a flow rule, they should all have
+ * different types (e.g. dropping a packet twice is not possible).
+ *
+ * Only the last action of a given type is taken into account. PMDs still
+ * perform error checking on the entire list.
+ *
+ * Note that PASSTHRU is the only action able to override a terminating
+ * rule.
+ */
+enum rte_flow_action_type {
+ /**
+ * [META]
+ *
+ * End marker for action lists. Prevents further processing of
+ * actions, thereby ending the list.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_END,
+
+ /**
+ * [META]
+ *
+ * Used as a placeholder for convenience. It is ignored and simply
+ * discarded by PMDs.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_VOID,
+
+ /**
+ * Leaves packets up for additional processing by subsequent flow
+ * rules. This is the default when a rule does not contain a
+ * terminating action, but can be specified to force a rule to
+ * become non-terminating.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_PASSTHRU,
+
+ /**
+ * [META]
+ *
+ * Attaches a 32 bit value to packets.
+ *
+ * See struct rte_flow_action_mark.
+ */
+ RTE_FLOW_ACTION_TYPE_MARK,
+
+ /**
+ * [META]
+ *
+ * Flag packets. Similar to MARK but only affects ol_flags.
+ *
+ * Note: a distinctive flag must be defined for it.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_FLAG,
+
+ /**
+ * Assigns packets to a given queue index.
+ *
+ * See struct rte_flow_action_queue.
+ */
+ RTE_FLOW_ACTION_TYPE_QUEUE,
+
+ /**
+ * Drops packets.
+ *
+ * PASSTHRU overrides this action if both are specified.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_DROP,
+
+ /**
+ * [META]
+ *
+ * Enables counters for this rule.
+ *
+ * These counters can be retrieved and reset through rte_flow_query(),
+ * see struct rte_flow_query_count.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_COUNT,
+
+ /**
+ * Duplicates packets to a given queue index.
+ *
+ * This is normally combined with QUEUE, however when used alone, it
+ * is actually similar to QUEUE + PASSTHRU.
+ *
+ * See struct rte_flow_action_dup.
+ */
+ RTE_FLOW_ACTION_TYPE_DUP,
+
+ /**
+ * Similar to QUEUE, except RSS is additionally performed on packets
+ * to spread them among several queues according to the provided
+ * parameters.
+ *
+ * See struct rte_flow_action_rss.
+ */
+ RTE_FLOW_ACTION_TYPE_RSS,
+
+ /**
+ * Redirects packets to the physical function (PF) of the current
+ * device.
+ *
+ * No associated configuration structure.
+ */
+ RTE_FLOW_ACTION_TYPE_PF,
+
+ /**
+ * Redirects packets to the virtual function (VF) of the current
+ * device with the specified ID.
+ *
+ * See struct rte_flow_action_vf.
+ */
+ RTE_FLOW_ACTION_TYPE_VF,
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_MARK
+ *
+ * Attaches a 32 bit value to packets.
+ *
+ * This value is arbitrary and application-defined. For compatibility with
+ * FDIR it is returned in the hash.fdir.hi mbuf field. PKT_RX_FDIR_ID is
+ * also set in ol_flags.
+ */
+struct rte_flow_action_mark {
+ uint32_t id; /**< 32 bit value to return with packets. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_QUEUE
+ *
+ * Assign packets to a given queue index.
+ *
+ * Terminating by default.
+ */
+struct rte_flow_action_queue {
+ uint16_t index; /**< Queue index to use. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_COUNT (query)
+ *
+ * Query structure to retrieve and reset flow rule counters.
+ */
+struct rte_flow_query_count {
+ uint32_t reset:1; /**< Reset counters after query [in]. */
+ uint32_t hits_set:1; /**< hits field is set [out]. */
+ uint32_t bytes_set:1; /**< bytes field is set [out]. */
+ uint32_t reserved:29; /**< Reserved, must be zero [in, out]. */
+ uint64_t hits; /**< Number of hits for this rule [out]. */
+ uint64_t bytes; /**< Number of bytes through this rule [out]. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_DUP
+ *
+ * Duplicates packets to a given queue index.
+ *
+ * This is normally combined with QUEUE, however when used alone, it is
+ * actually similar to QUEUE + PASSTHRU.
+ *
+ * Non-terminating by default.
+ */
+struct rte_flow_action_dup {
+ uint16_t index; /**< Queue index to duplicate packets to. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_RSS
+ *
+ * Similar to QUEUE, except RSS is additionally performed on packets to
+ * spread them among several queues according to the provided parameters.
+ *
+ * Note: RSS hash result is normally stored in the hash.rss mbuf field,
+ * however it conflicts with the MARK action as they share the same
+ * space. When both actions are specified, the RSS hash is discarded and
+ * PKT_RX_RSS_HASH is not set in ol_flags. MARK has priority. The mbuf
+ * structure should eventually evolve to store both.
+ *
+ * Terminating by default.
+ */
+struct rte_flow_action_rss {
+ const struct rte_eth_rss_conf *rss_conf; /**< RSS parameters. */
+ uint16_t num; /**< Number of entries in queue[]. */
+ uint16_t queue[]; /**< Queues indices to use. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_VF
+ *
+ * Redirects packets to a virtual function (VF) of the current device.
+ *
+ * Packets matched by a VF pattern item can be redirected to their original
+ * VF ID instead of the specified one. This parameter may not be available
+ * and is not guaranteed to work properly if the VF part is matched by a
+ * prior flow rule or if packets are not addressed to a VF in the first
+ * place.
+ *
+ * Terminating by default.
+ */
+struct rte_flow_action_vf {
+ uint32_t original:1; /**< Use original VF ID if possible. */
+ uint32_t reserved:31; /**< Reserved, must be zero. */
+ uint32_t id; /**< VF ID to redirect packets to. */
+};
+
+/**
+ * Definition of a single action.
+ *
+ * A list of actions is terminated by a END action.
+ *
+ * For simple actions without a configuration structure, conf remains NULL.
+ */
+struct rte_flow_action {
+ enum rte_flow_action_type type; /**< Action type. */
+ const void *conf; /**< Pointer to action configuration structure. */
+};
+
+/**
+ * Opaque type returned after successfully creating a flow.
+ *
+ * This handle can be used to manage and query the related flow (e.g. to
+ * destroy it or retrieve counters).
+ */
+struct rte_flow;
+
+/**
+ * Verbose error types.
+ *
+ * Most of them provide the type of the object referenced by struct
+ * rte_flow_error.cause.
+ */
+enum rte_flow_error_type {
+ RTE_FLOW_ERROR_TYPE_NONE, /**< No error. */
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, /**< Cause unspecified. */
+ RTE_FLOW_ERROR_TYPE_HANDLE, /**< Flow rule (handle). */
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP, /**< Group field. */
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY, /**< Priority field. */
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, /**< Ingress field. */
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, /**< Egress field. */
+ RTE_FLOW_ERROR_TYPE_ATTR, /**< Attributes structure. */
+ RTE_FLOW_ERROR_TYPE_ITEM_NUM, /**< Pattern length. */
+ RTE_FLOW_ERROR_TYPE_ITEM, /**< Specific pattern item. */
+ RTE_FLOW_ERROR_TYPE_ACTION_NUM, /**< Number of actions. */
+ RTE_FLOW_ERROR_TYPE_ACTION, /**< Specific action. */
+};
+
+/**
+ * Verbose error structure definition.
+ *
+ * This object is normally allocated by applications and set by PMDs, the
+ * message points to a constant string which does not need to be freed by
+ * the application, however its pointer can be considered valid only as long
+ * as its associated DPDK port remains configured. Closing the underlying
+ * device or unloading the PMD invalidates it.
+ *
+ * Both cause and message may be NULL regardless of the error type.
+ */
+struct rte_flow_error {
+ enum rte_flow_error_type type; /**< Cause field and error types. */
+ const void *cause; /**< Object responsible for the error. */
+ const char *message; /**< Human-readable error message. */
+};
+
+/**
+ * Check whether a flow rule can be created on a given port.
+ *
+ * While this function has no effect on the target device, the flow rule is
+ * validated against its current configuration state and the returned value
+ * should be considered valid by the caller for that state only.
+ *
+ * The returned value is guaranteed to remain valid only as long as no
+ * successful calls to rte_flow_create() or rte_flow_destroy() are made in
+ * the meantime and no device parameter affecting flow rules in any way are
+ * modified, due to possible collisions or resource limitations (although in
+ * such cases EINVAL should not be returned).
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] pattern
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 if flow rule is valid and can be created. A negative errno value
+ * otherwise (rte_errno is also set), the following errors are defined:
+ *
+ * -ENOSYS: underlying device does not support this functionality.
+ *
+ * -EINVAL: unknown or invalid rule specification.
+ *
+ * -ENOTSUP: valid but unsupported rule specification (e.g. partial
+ * bit-masks are unsupported).
+ *
+ * -EEXIST: collision with an existing rule.
+ *
+ * -ENOMEM: not enough resources.
+ *
+ * -EBUSY: action cannot be performed due to busy device resources, may
+ * succeed if the affected queues or even the entire port are in a stopped
+ * state (see rte_eth_dev_rx_queue_stop() and rte_eth_dev_stop()).
+ */
+int
+rte_flow_validate(uint8_t port_id,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error);
+
+/**
+ * Create a flow rule on a given port.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] pattern
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * A valid handle in case of success, NULL otherwise and rte_errno is set
+ * to the positive version of one of the error codes defined for
+ * rte_flow_validate().
+ */
+struct rte_flow *
+rte_flow_create(uint8_t port_id,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error);
+
+/**
+ * Destroy a flow rule on a given port.
+ *
+ * Failure to destroy a flow rule handle may occur when other flow rules
+ * depend on it, and destroying it would result in an inconsistent state.
+ *
+ * This function is only guaranteed to succeed if handles are destroyed in
+ * reverse order of their creation.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param flow
+ * Flow rule handle to destroy.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+rte_flow_destroy(uint8_t port_id,
+ struct rte_flow *flow,
+ struct rte_flow_error *error);
+
+/**
+ * Destroy all flow rules associated with a port.
+ *
+ * In the unlikely event of failure, handles are still considered destroyed
+ * and no longer valid but the port must be assumed to be in an inconsistent
+ * state.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+rte_flow_flush(uint8_t port_id,
+ struct rte_flow_error *error);
+
+/**
+ * Query an existing flow rule.
+ *
+ * This function allows retrieving flow-specific data such as counters.
+ * Data is gathered by special actions which must be present in the flow
+ * rule definition.
+ *
+ * \see RTE_FLOW_ACTION_TYPE_COUNT
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param flow
+ * Flow rule handle to query.
+ * @param action
+ * Action type to query.
+ * @param[in, out] data
+ * Pointer to storage for the associated query data type.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+rte_flow_query(uint8_t port_id,
+ struct rte_flow *flow,
+ enum rte_flow_action_type action,
+ void *data,
+ struct rte_flow_error *error);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* RTE_FLOW_H_ */
git.droids-corp.org / dpdk.git / commitdiff