switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
supported = true;
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED)
+ return ret_val;
/* Cache bit indicating need for crosstalk fix */
switch (hw->mac.type) {
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
switch (mac->ops.get_media_type(hw)) {
case ixgbe_media_type_fiber:
- mac->ops.setup_fc = ixgbe_setup_fc_fiber_x550em_a;
+ mac->ops.setup_fc = NULL;
mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
break;
case ixgbe_media_type_backplane:
}
/**
- * ixgbe_fc_autoneg_fiber_x550em_a - Enable flow control IEEE clause 37
+ * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
* @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
**/
void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
{
- u32 link_s1, pcs_an_lp, pcs_an;
- s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
- ixgbe_link_speed speed;
- bool link_up;
-
- /* AN should have completed when the cable was plugged in.
- * Look for reasons to bail out. Bail out if:
- * - FC autoneg is disabled, or if
- * - link is not up.
- */
- if (hw->fc.disable_fc_autoneg) {
- ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
- "Flow control autoneg is disabled");
- goto out;
- }
-
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- if (!link_up) {
- ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
- goto out;
- }
-
- /* Check if auto-negotiation has completed */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_S1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1);
-
- if (status != IXGBE_SUCCESS ||
- (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- status = IXGBE_ERR_FC_NOT_NEGOTIATED;
- goto out;
- }
-
- /* Determine advertised flow control */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an);
-
- if (status != IXGBE_SUCCESS) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- goto out;
- }
-
- /* Determine link parter flow control */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN_LP(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an_lp);
-
- if (status != IXGBE_SUCCESS) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- goto out;
- }
-
- status = ixgbe_negotiate_fc(hw, pcs_an, pcs_an_lp,
- IXGBE_KRM_PCS_KX_AN_SYM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_ASM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_LP_SYM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_LP_ASM_PAUSE);
-
-out:
- if (status == IXGBE_SUCCESS) {
- hw->fc.fc_was_autonegged = true;
- } else {
- hw->fc.fc_was_autonegged = false;
- hw->fc.current_mode = hw->fc.requested_mode;
- }
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
}
/**
return status;
}
-/**
- * ixgbe_setup_fc_fiber_x550em_a - Set up flow control
- * @hw: pointer to hardware structure
- *
- * Called at init time to set up flow control.
- **/
-s32 ixgbe_setup_fc_fiber_x550em_a(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
- s32 rc = IXGBE_SUCCESS;
- u32 an_cntl4, lctrl, pcs_an;
-
- DEBUGFUNC("ixgbe_setup_fc_fiber_x550em_a");
-
- /* Validate the requested mode */
- if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
- ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
- "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
- }
-
- /* Enable clause 37 auto-negotiation in KRM_LINK_CTRL_1 */
- if (hw->fc.requested_mode == ixgbe_fc_default)
- hw->fc.requested_mode = ixgbe_fc_full;
-
- rc = mac->ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &lctrl);
- if (rc)
- return rc;
-
- lctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
- lctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
-
- rc = mac->ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, lctrl);
- if (rc)
- return rc;
-
- /* Enable clause 37 over 73 in KRM_AN_CNTL_4 */
- rc = mac->ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl4);
- if (rc)
- return rc;
-
- an_cntl4 |= IXGBE_KRM_AN_CNTL_4_ECSR_AN37_OVER_73;
-
- rc = mac->ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl4);
- if (rc)
- return rc;
-
- rc = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an);
-
- if (rc)
- return rc;
-
- /* The possible values of fc.requested_mode are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but
- * we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.requested_mode) {
- case ixgbe_fc_none:
- /* Flow control completely disabled by software override. */
- pcs_an &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
- IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
- break;
- case ixgbe_fc_tx_pause:
- /* Tx Flow control is enabled, and Rx Flow control is
- * disabled by software override.
- */
- pcs_an |= IXGBE_KRM_PCS_KX_AN_ASM_PAUSE;
- pcs_an &= ~IXGBE_KRM_PCS_KX_AN_SYM_PAUSE;
- break;
- case ixgbe_fc_rx_pause:
- /* Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE, as such we fall
- * through to the fc_full statement. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- case ixgbe_fc_full:
- /* Flow control (both Rx and Tx) is enabled by SW override. */
- pcs_an |= IXGBE_KRM_PCS_KX_AN_SYM_PAUSE |
- IXGBE_KRM_PCS_KX_AN_ASM_PAUSE;
- break;
- default:
- ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
- "Flow control param set incorrectly\n");
- return IXGBE_ERR_CONFIG;
- }
-
- rc = hw->mac.ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, pcs_an);
-
- /* Restart auto-negotiation. */
- rc = ixgbe_restart_an_internal_phy_x550em(hw);
-
- return rc;
-}
-
/**
* ixgbe_set_mux - Set mux for port 1 access with CS4227
* @hw: pointer to hardware structure
git.droids-corp.org / dpdk.git / commitdiff