common/sfc_efx/base: check for MAE privilege

VFs can't control MAE, so it's important to override the general
MAE capability bit by taking MAE privilege into account. Reorder
the code slightly to have the privileges queried before datapath
capabilities are discovered and add required MAE privilege check.

Fixes: eb4e80085fae ("common/sfc_efx/base: indicate support for MAE")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

diff --git a/drivers/common/sfc_efx/base/ef10_nic.c b/drivers/common/sfc_efx/base/ef10_nic.c
index 68414d9..9dccde9 100644 (file)
--- a/drivers/common/sfc_efx/base/ef10_nic.c
+++ b/drivers/common/sfc_efx/base/ef10_nic.c
@@ -1423,11 +1423,19 @@ ef10_get_datapath_caps(
 
 #if EFSYS_OPT_MAE
        /*
-        * Indicate support for MAE.
-        * MAE is supported by Riverhead boards starting with R2,
-        * and it is required that FW is built with MAE support, too.
+        * Check support for EF100 Match Action Engine (MAE).
+        * MAE hardware is present on Riverhead boards (from R2),
+        * and on Keystone, and requires support in firmware.
+        *
+        * MAE control operations require MAE control privilege,
+        * which is not available for VFs.
+        *
+        * Privileges can change dynamically at runtime: we assume
+        * MAE support requires the privilege is granted initially,
+        * and ignore later dynamic changes.
         */
-       if (CAP_FLAGS3(req, MAE_SUPPORTED))
+       if (CAP_FLAGS3(req, MAE_SUPPORTED) &&
+           EFX_MCDI_HAVE_PRIVILEGE(encp->enc_privilege_mask, MAE))
                encp->enc_mae_supported = B_TRUE;
        else
                encp->enc_mae_supported = B_FALSE;
@@ -1896,6 +1904,18 @@ efx_mcdi_nic_board_cfg(
 
        EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
 
+       /*
+        * Get the current privilege mask. Note that this may be modified
+        * dynamically, so for most cases the value is informational only.
+        * If the privilege being discovered can't be granted dynamically,
+        * it's fine to rely on the value. In all other cases, DO NOT use
+        * the privilege mask to check for sufficient privileges, as that
+        * can result in time-of-check/time-of-use bugs.
+        */
+       if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
+               goto fail6;
+       encp->enc_privilege_mask = mask;
+
        /* Board configuration (legacy) */
        rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
        if (rc != 0) {
@@ -1903,14 +1923,14 @@ efx_mcdi_nic_board_cfg(
                if (rc == EACCES)
                        board_type = 0;
                else
-                       goto fail6;
+                       goto fail7;
        }
 
        encp->enc_board_type = board_type;
 
        /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
        if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
-               goto fail7;
+               goto fail8;
 
        /*
         * Firmware with support for *_FEC capability bits does not
@@ -1929,18 +1949,18 @@ efx_mcdi_nic_board_cfg(
 
        /* Obtain the default PHY advertised capabilities */
        if ((rc = ef10_phy_get_link(enp, &els)) != 0)
-               goto fail8;
+               goto fail9;
        epp->ep_default_adv_cap_mask = els.epls.epls_adv_cap_mask;
        epp->ep_adv_cap_mask = els.epls.epls_adv_cap_mask;
 
        /* Check capabilities of running datapath firmware */
        if ((rc = ef10_get_datapath_caps(enp)) != 0)
-               goto fail9;
+               goto fail10;
 
        /* Get interrupt vector limits */
        if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
                if (EFX_PCI_FUNCTION_IS_PF(encp))
-                       goto fail10;
+                       goto fail11;
 
                /* Ignore error (cannot query vector limits from a VF). */
                base = 0;
@@ -1949,16 +1969,6 @@ efx_mcdi_nic_board_cfg(
        encp->enc_intr_vec_base = base;
        encp->enc_intr_limit = nvec;
 
-       /*
-        * Get the current privilege mask. Note that this may be modified
-        * dynamically, so this value is informational only. DO NOT use
-        * the privilege mask to check for sufficient privileges, as that
-        * can result in time-of-check/time-of-use bugs.
-        */
-       if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
-               goto fail11;
-       encp->enc_privilege_mask = mask;
-
        return (0);
 
 fail11: