static int i40e_pf_parameter_init(struct rte_eth_dev *dev);
static int i40e_pf_setup(struct i40e_pf *pf);
static int i40e_vsi_init(struct i40e_vsi *vsi);
+static int i40e_vmdq_setup(struct rte_eth_dev *dev);
static void i40e_stat_update_32(struct i40e_hw *hw, uint32_t reg,
bool offset_loaded, uint64_t *offset, uint64_t *stat);
static void i40e_stat_update_48(struct i40e_hw *hw,
};
static inline int
-i40e_prev_power_of_2(int n)
+i40e_align_floor(int n)
{
- int p = n;
-
- --p;
- p |= p >> 1;
- p |= p >> 2;
- p |= p >> 4;
- p |= p >> 8;
- p |= p >> 16;
- if (p == (n - 1))
- return n;
- p >>= 1;
-
- return ++p;
+ if (n == 0)
+ return 0;
+ return (1 << (sizeof(n) * CHAR_BIT - 1 - __builtin_clz(n)));
}
static inline int
if (!dev->data->mac_addrs) {
PMD_INIT_LOG(ERR, "Failed to allocated memory "
"for storing mac address");
- goto err_get_mac_addr;
+ goto err_mac_alloc;
}
ether_addr_copy((struct ether_addr *)hw->mac.perm_addr,
&dev->data->mac_addrs[0]);
return 0;
+err_mac_alloc:
+ i40e_vsi_release(pf->main_vsi);
err_setup_pf_switch:
- rte_free(pf->main_vsi);
err_get_mac_addr:
err_configure_lan_hmc:
(void)i40e_shutdown_lan_hmc(hw);
static int
i40e_dev_configure(struct rte_eth_dev *dev)
{
+ int ret;
+ enum rte_eth_rx_mq_mode mq_mode = dev->data->dev_conf.rxmode.mq_mode;
+
+ /* VMDQ setup.
+ * Needs to move VMDQ setting out of i40e_pf_config_mq_rx() as VMDQ and
+ * RSS setting have different requirements.
+ * General PMD driver call sequence are NIC init, configure,
+ * rx/tx_queue_setup and dev_start. In rx/tx_queue_setup() function, it
+ * will try to lookup the VSI that specific queue belongs to if VMDQ
+ * applicable. So, VMDQ setting has to be done before
+ * rx/tx_queue_setup(). This function is good to place vmdq_setup.
+ * For RSS setting, it will try to calculate actual configured RX queue
+ * number, which will be available after rx_queue_setup(). dev_start()
+ * function is good to place RSS setup.
+ */
+ if (mq_mode & ETH_MQ_RX_VMDQ_FLAG) {
+ ret = i40e_vmdq_setup(dev);
+ if (ret)
+ return ret;
+ }
+
return i40e_dev_init_vlan(dev);
}
.txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS,
};
+ if (pf->flags | I40E_FLAG_VMDQ) {
+ dev_info->max_vmdq_pools = pf->max_nb_vmdq_vsi;
+ dev_info->vmdq_queue_base = dev_info->max_rx_queues;
+ dev_info->vmdq_queue_num = pf->vmdq_nb_qps *
+ pf->max_nb_vmdq_vsi;
+ dev_info->vmdq_pool_base = I40E_VMDQ_POOL_BASE;
+ dev_info->max_rx_queues += dev_info->vmdq_queue_num;
+ dev_info->max_tx_queues += dev_info->vmdq_queue_num;
+ }
}
static int
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
struct i40e_hw *hw = I40E_PF_TO_HW(pf);
- uint16_t sum_queues = 0, sum_vsis;
+ uint16_t sum_queues = 0, sum_vsis, left_queues;
/* First check if FW support SRIOV */
if (dev->pci_dev->max_vfs && !hw->func_caps.sr_iov_1_1) {
pf->flags |= I40E_FLAG_RSS;
pf->lan_nb_qps = RTE_MIN(hw->func_caps.num_tx_qp,
(uint32_t)(1 << hw->func_caps.rss_table_entry_width));
- pf->lan_nb_qps = i40e_prev_power_of_2(pf->lan_nb_qps);
+ pf->lan_nb_qps = i40e_align_floor(pf->lan_nb_qps);
} else
pf->lan_nb_qps = 1;
sum_queues = pf->lan_nb_qps;
if (hw->func_caps.vmdq) {
pf->flags |= I40E_FLAG_VMDQ;
- pf->vmdq_nb_qps = I40E_DEFAULT_QP_NUM_VMDQ;
- sum_queues += pf->vmdq_nb_qps;
- sum_vsis += 1;
- PMD_INIT_LOG(INFO, "VMDQ queue pairs:%u", pf->vmdq_nb_qps);
+ pf->vmdq_nb_qps = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
+ pf->max_nb_vmdq_vsi = 1;
+ /*
+ * If VMDQ available, assume a single VSI can be created. Will adjust
+ * later.
+ */
+ sum_queues += pf->vmdq_nb_qps * pf->max_nb_vmdq_vsi;
+ sum_vsis += pf->max_nb_vmdq_vsi;
+ } else {
+ pf->vmdq_nb_qps = 0;
+ pf->max_nb_vmdq_vsi = 0;
}
+ pf->nb_cfg_vmdq_vsi = 0;
if (hw->func_caps.fd) {
pf->flags |= I40E_FLAG_FDIR;
return -EINVAL;
}
+ /* Adjust VMDQ setting to support as many VMs as possible */
+ if (pf->flags & I40E_FLAG_VMDQ) {
+ left_queues = hw->func_caps.num_rx_qp - sum_queues;
+
+ pf->max_nb_vmdq_vsi += RTE_MIN(left_queues / pf->vmdq_nb_qps,
+ pf->max_num_vsi - sum_vsis);
+
+ /* Limit the max VMDQ number that rte_ether that can support */
+ pf->max_nb_vmdq_vsi = RTE_MIN(pf->max_nb_vmdq_vsi,
+ ETH_64_POOLS - 1);
+
+ PMD_INIT_LOG(INFO, "Max VMDQ VSI num:%u",
+ pf->max_nb_vmdq_vsi);
+ PMD_INIT_LOG(INFO, "VMDQ queue pairs:%u", pf->vmdq_nb_qps);
+ }
+
/* Each VSI occupy 1 MSIX interrupt at least, plus IRQ0 for misc intr
* cause */
if (sum_vsis > hw->func_caps.num_msix_vectors - 1) {
vsi->enabled_tc = enabled_tcmap;
/* Number of queues per enabled TC */
- qpnum_per_tc = i40e_prev_power_of_2(vsi->nb_qps / total_tc);
+ qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc);
qpnum_per_tc = RTE_MIN(qpnum_per_tc, I40E_MAX_Q_PER_TC);
bsf = rte_bsf32(qpnum_per_tc);
case I40E_VSI_SRIOV :
vsi->nb_qps = pf->vf_nb_qps;
break;
+ case I40E_VSI_VMDQ2:
+ vsi->nb_qps = pf->vmdq_nb_qps;
+ break;
default:
goto fail_mem;
}
* Since VSI is not created yet, only configure parameter,
* will add vsi below.
*/
- }
- else {
+ } else if (type == I40E_VSI_VMDQ2) {
+ memset(&ctxt, 0, sizeof(ctxt));
+ /*
+ * For other VSI, the uplink_seid equals to uplink VSI's
+ * uplink_seid since they share same VEB
+ */
+ vsi->uplink_seid = uplink_vsi->uplink_seid;
+ ctxt.pf_num = hw->pf_id;
+ ctxt.vf_num = 0;
+ ctxt.uplink_seid = vsi->uplink_seid;
+ ctxt.connection_type = 0x1;
+ ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
+
+ ctxt.info.valid_sections |=
+ rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ /* user_param carries flag to enable loop back */
+ if (user_param) {
+ ctxt.info.switch_id =
+ rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_LOCAL_LB);
+ ctxt.info.switch_id |=
+ rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
+
+ /* Configure port/vlan */
+ ctxt.info.valid_sections |=
+ rte_cpu_to_le_16(I40E_AQ_VSI_PROP_VLAN_VALID);
+ ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
+ ret = i40e_vsi_config_tc_queue_mapping(vsi, &ctxt.info,
+ I40E_DEFAULT_TCMAP);
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(ERR, "Failed to configure "
+ "TC queue mapping");
+ goto fail_msix_alloc;
+ }
+ ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
+ ctxt.info.valid_sections |=
+ rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
+ } else {
PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet");
goto fail_msix_alloc;
}
{
struct i40e_hw *hw = I40E_PF_TO_HW(pf);
struct i40e_filter_control_settings settings;
- struct rte_eth_dev_data *dev_data = pf->dev_data;
struct i40e_vsi *vsi;
int ret;
return I40E_ERR_NOT_READY;
}
pf->main_vsi = vsi;
- dev_data->nb_rx_queues = vsi->nb_qps;
- dev_data->nb_tx_queues = vsi->nb_qps;
/* Configure filter control */
memset(&settings, 0, sizeof(settings));
return err;
}
+static int
+i40e_vmdq_setup(struct rte_eth_dev *dev)
+{
+ struct rte_eth_conf *conf = &dev->data->dev_conf;
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ int i, err, conf_vsis, j, loop;
+ struct i40e_vsi *vsi;
+ struct i40e_vmdq_info *vmdq_info;
+ struct rte_eth_vmdq_rx_conf *vmdq_conf;
+ struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+
+ /*
+ * Disable interrupt to avoid message from VF. Furthermore, it will
+ * avoid race condition in VSI creation/destroy.
+ */
+ i40e_pf_disable_irq0(hw);
+
+ if ((pf->flags & I40E_FLAG_VMDQ) == 0) {
+ PMD_INIT_LOG(ERR, "FW doesn't support VMDQ");
+ return -ENOTSUP;
+ }
+
+ conf_vsis = conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools;
+ if (conf_vsis > pf->max_nb_vmdq_vsi) {
+ PMD_INIT_LOG(ERR, "VMDQ config: %u, max support:%u",
+ conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools,
+ pf->max_nb_vmdq_vsi);
+ return -ENOTSUP;
+ }
+
+ if (pf->vmdq != NULL) {
+ PMD_INIT_LOG(INFO, "VMDQ already configured");
+ return 0;
+ }
+
+ pf->vmdq = rte_zmalloc("vmdq_info_struct",
+ sizeof(*vmdq_info) * conf_vsis, 0);
+
+ if (pf->vmdq == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate memory");
+ return -ENOMEM;
+ }
+
+ vmdq_conf = &conf->rx_adv_conf.vmdq_rx_conf;
+
+ /* Create VMDQ VSI */
+ for (i = 0; i < conf_vsis; i++) {
+ vsi = i40e_vsi_setup(pf, I40E_VSI_VMDQ2, pf->main_vsi,
+ vmdq_conf->enable_loop_back);
+ if (vsi == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to create VMDQ VSI");
+ err = -1;
+ goto err_vsi_setup;
+ }
+ vmdq_info = &pf->vmdq[i];
+ vmdq_info->pf = pf;
+ vmdq_info->vsi = vsi;
+ }
+ pf->nb_cfg_vmdq_vsi = conf_vsis;
+
+ /* Configure Vlan */
+ loop = sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT;
+ for (i = 0; i < vmdq_conf->nb_pool_maps; i++) {
+ for (j = 0; j < loop && j < pf->nb_cfg_vmdq_vsi; j++) {
+ if (vmdq_conf->pool_map[i].pools & (1UL << j)) {
+ PMD_INIT_LOG(INFO, "Add vlan %u to vmdq pool %u",
+ vmdq_conf->pool_map[i].vlan_id, j);
+
+ err = i40e_vsi_add_vlan(pf->vmdq[j].vsi,
+ vmdq_conf->pool_map[i].vlan_id);
+ if (err) {
+ PMD_INIT_LOG(ERR, "Failed to add vlan");
+ err = -1;
+ goto err_vsi_setup;
+ }
+ }
+ }
+ }
+
+ i40e_pf_enable_irq0(hw);
+
+ return 0;
+
+err_vsi_setup:
+ for (i = 0; i < conf_vsis; i++)
+ if (pf->vmdq[i].vsi == NULL)
+ break;
+ else
+ i40e_vsi_release(pf->vmdq[i].vsi);
+
+ rte_free(pf->vmdq);
+ pf->vmdq = NULL;
+ i40e_pf_enable_irq0(hw);
+ return err;
+}
+
static void
i40e_stat_update_32(struct i40e_hw *hw,
uint32_t reg,
struct i40e_hw *hw = I40E_PF_TO_HW(pf);
struct rte_eth_rss_conf rss_conf;
uint32_t i, lut = 0;
- uint16_t j, num = i40e_prev_power_of_2(pf->dev_data->nb_rx_queues);
+ uint16_t j, num = i40e_align_floor(pf->dev_data->nb_rx_queues);
for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
if (j == num)
git.droids-corp.org / dpdk.git / commitdiff