net/ixgbe/base: limit iXFI setup to X552 devices

The MAC register NW_MNG_IF_SEL fields have been redefined for X553.
These changes impact the iXFI driver code flow. Since iXFI is only
supported in X552, this patch adds X552 MAC check for iXFI flows.

Signed-off-by: Wei Dai <wei.dai@intel.com>

diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index b90ae6d..adc5fb3 100644 (file)
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -4271,8 +4271,8 @@ struct ixgbe_hw {
 #define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G       (1u << 19)
 #define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G     (1u << 20)
 #define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G      (1u << 21)
-#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M (1 << 23)
-#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
+#define IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE       (1u << 25)
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24) /* X552 reg field only */
 #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
 #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD       \
                                (0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)

diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index fecc8e6..a338a79 100644 (file)
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -3053,6 +3053,10 @@ STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
        s32 status;
        u32 reg_val;
 
+       /* iXFI is only supported with X552 */
+       if (mac->type != ixgbe_mac_X550EM_x)
+               return IXGBE_ERR_LINK_SETUP;
+
        /* Disable AN and force speed to 10G Serial. */
        status = mac->ops.read_iosf_sb_reg(hw,
                                        IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
@@ -3149,7 +3153,8 @@ s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
        if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
                return IXGBE_ERR_CONFIG;
 
-       if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+       if (hw->mac.type == ixgbe_mac_X550EM_x &&
+           !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
                /* If link is down, there is no setup necessary so return  */
                status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
                if (status != IXGBE_SUCCESS)
@@ -4651,8 +4656,10 @@ s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
        else
                force_speed = IXGBE_LINK_SPEED_1GB_FULL;
 
-       /* If internal link mode is XFI, then setup XFI internal link. */
-       if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+       /* If X552 and internal link mode is XFI, then setup XFI internal link.
+        */
+       if (hw->mac.type == ixgbe_mac_X550EM_x &&
+           !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
                status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
 
                if (status != IXGBE_SUCCESS)