--- /dev/null
+TARGET = main
+
+# repertoire des modules
+AVERSIVE_DIR ?= ../../..
+# VALUE, absolute or relative path : example ../.. #
+
+CFLAGS += -Werror
+
+# atm128 or atm1284
+# address is 0xf000 (in words)
+LDFLAGS += -Wl,--section-start=.text=1e000
+UART_NUM = 1
+
+# atm2560
+# address is 0x1f800 (in words)
+# LDFLAGS += -Wl,--section-start=.text=3f000
+# UART_NUM = 1
+
+CFLAGS += -DUART_NUM=$(UART_NUM)
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+########################################
+
+-include .aversive_conf
+include $(AVERSIVE_DIR)/mk/aversive_project.mk
+
+program_noerase: $(TARGET).$(FORMAT_EXTENSION) $(TARGET).eep
+ echo $(AVRDUDE) -D -V $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) ;\
+ $(AVRDUDE) -D -V $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) ;\
+
--- /dev/null
+/*
+ * Copyright Droids Corporation
+ * Olivier Matz <zer0@droids-corp.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Revision : $Id: main.c,v 1.4 2009-05-27 20:04:06 zer0 Exp $
+ *
+ */
+
+/*
+ * A simple bootloader example.
+ */
+
+#include <aversive.h>
+#include <aversive/wait.h>
+#include <aversive/pgmspace.h>
+
+#include <stdlib.h>
+#include <string.h>
+#include <util/crc16.h>
+#include <avr/boot.h>
+
+#define NOECHO
+
+#ifdef NOECHO
+#define echo(c) do {} while(0)
+#else
+#define echo(c) uart_send(c)
+#endif
+
+#if UART_NUM == 0
+
+#define UCSRxA UCSR0A
+#define UCSRxB UCSR0B
+#define UCSRxC UCSR0C
+#define RXCx RXC0
+#define UDRx UDR0
+#define UDREx UDRE0
+#define U2Xx U2X0
+#define RXENx RXEN0
+#define TXENx TXEN0
+#define UCSZx0 UCSZ00
+#define UCSZx1 UCSZ01
+#define UBRRx UBRR0
+
+#elif UART_NUM == 1
+
+#define UCSRxA UCSR1A
+#define UCSRxB UCSR1B
+#define UCSRxC UCSR1C
+#define RXCx RXC1
+#define UDRx UDR1
+#define UDREx UDRE1
+#define U2Xx U2X1
+#define RXENx RXEN1
+#define TXENx TXEN1
+#define UCSZx0 UCSZ10
+#define UCSZx1 UCSZ11
+#define UBRRx UBRR1
+
+#elif UART_NUM == 2
+
+#define UCSRxA UCSR2A
+#define UCSRxB UCSR2B
+#define UCSRxC UCSR2C
+#define RXCx RXC2
+#define UDRx UDR2
+#define UDREx UDRE2
+#define U2Xx U2X2
+#define RXENx RXEN2
+#define TXENx TXEN2
+#define UCSZx0 UCSZ20
+#define UCSZx1 UCSZ21
+#define UBRRx UBRR2
+
+#elif UART_NUM == 3
+
+#define UCSRxA UCSR3A
+#define UCSRxB UCSR3B
+#define UCSRxC UCSR3C
+#define RXCx RXC3
+#define UDRx UDR3
+#define UDREx UDRE3
+#define U2Xx U2X3
+#define RXENx RXEN3
+#define TXENx TXEN3
+#define UCSZx0 UCSZ30
+#define UCSZx1 UCSZ31
+#define UBRRx UBRR3
+
+#endif
+
+
+static char uart_recv(void)
+{
+ while ( !(UCSRxA & (1<<RXCx)) ) ;
+ return UDRx;
+}
+
+static void uart_send(char c)
+{
+ while ( !( UCSRxA & (1<<UDREx)) ) ;
+ UDRx = c;
+}
+
+static void uart_puts(const char *buf)
+{
+ while (*buf)
+ uart_send(*(buf++));
+}
+
+static int8_t bootloader_query_hex(uint32_t *val)
+{
+ uint32_t tmp = 0;
+ int c;
+
+ while (1) {
+ c = uart_recv();
+ echo(c);
+
+ if (c == '\n' || c == '\r') {
+ *val = tmp;
+ return 0;
+ }
+ else if (c >= '0' && c <= '9') {
+ tmp <<= 4;
+ tmp += (c - '0');
+ }
+ else if (c >= 'a' && c <= 'f') {
+ tmp <<= 4;
+ tmp += (c - 'a' + 10);
+ }
+ else if (c >= 'A' && c <= 'F') {
+ tmp <<= 4;
+ tmp += (c - 'A' + 10);
+ }
+ else
+ return -1;
+ }
+ return 0;
+}
+
+/* launch application */
+static void launch_app(void)
+{
+ uart_puts("Boot...");
+ MCUCR = (1 << IVCE);
+ MCUCR = (0 << IVSEL);
+ reset();
+}
+
+static void disp_digit(uint8_t x)
+{
+ if (x < 10)
+ x += '0';
+ else
+ x += 'a' - 10 ;
+ uart_send(x);
+}
+
+static void disp_hex8(uint8_t x)
+{
+ disp_digit(x>>4);
+ disp_digit(x&0xf);
+}
+
+static void disp_hex16(uint16_t x)
+{
+ disp_hex8(x>>8);
+ disp_hex8(x);
+}
+
+static void disp_hex32(uint32_t x)
+{
+ disp_hex16(x>>16);
+ disp_hex16(x);
+}
+
+static void crc_app(void)
+{
+ uint32_t start_addr, addr, size;
+ uint8_t c;
+ uint16_t crc = 0xffff;
+ uint16_t sum = 0;
+
+ uart_puts("addr?\r\n");
+ if (bootloader_query_hex(&start_addr))
+ goto fail;
+ if (start_addr > FLASHEND)
+ goto fail;
+ uart_puts("size?\r\n");
+ if (bootloader_query_hex(&size))
+ goto fail;
+ if (start_addr + size > FLASHEND)
+ goto fail;
+ for (addr=start_addr; addr<start_addr+size; addr++) {
+#if 0
+ /* ignore the 2nd page, it contains microb infos */
+ if (addr >= 256 && addr < 512)
+ continue;
+#endif
+ c = pgm_read_byte_far(addr);
+ crc = _crc_ccitt_update(crc, c);
+ sum += c;
+ }
+ disp_hex16(crc);
+ disp_hex16(sum);
+ return;
+ fail:
+ uart_puts("KO");
+}
+
+static void read32(void)
+{
+ uint32_t start_addr, val = 0;
+ uint8_t c, i;
+
+ uart_puts("addr?\r\n");
+ if (bootloader_query_hex(&start_addr))
+ goto fail;
+ if (start_addr > FLASHEND)
+ goto fail;
+ for (i=0; i<4; i++) {
+ c = pgm_read_byte_far(start_addr+i);
+ val <<= 8;
+ val |= c;
+ }
+ disp_hex32(val);
+ return;
+ fail:
+ uart_puts("KO");
+}
+
+static void prog_page(void)
+{
+ int c;
+ uint32_t addr;
+ uint16_t i;
+ uint16_t crc = 0xffff;
+ uint16_t sum = 0;
+ uint8_t buf[SPM_PAGESIZE];
+
+#define SPM_PAGEMASK ((uint32_t)SPM_PAGESIZE-1)
+ uart_puts("addr?\r\n");
+ if (bootloader_query_hex(&addr))
+ goto fail;
+ if (addr > FLASHEND)
+ goto fail;
+ /* start_addr must be page aligned */
+ if (addr & SPM_PAGEMASK)
+ goto fail;
+
+ uart_puts("ok\r\n");
+
+
+ /* data is received like the .bin format (which is already in
+ * little endian) */
+ for (i=0; i<SPM_PAGESIZE; i++) {
+ c = uart_recv();
+ crc = _crc_ccitt_update(crc, c);
+ sum += c;
+ buf[i] = c;
+ }
+ disp_hex16(crc);
+ disp_hex16(sum);
+ uart_puts(" (y?)\r\n");
+ c = uart_recv();
+ if (c != 'y')
+ goto fail;
+
+ /* erase page */
+ eeprom_busy_wait();
+ boot_page_erase(addr);
+ boot_spm_busy_wait();
+
+ /* Set up little-endian word and fill tmp buf. */
+ for (i=0; i<SPM_PAGESIZE; i+=2) {
+ uint16_t w = buf[i] + ((uint16_t)(buf[i+1]) << 8);
+ boot_page_fill(addr + i, w);
+ }
+
+ boot_page_write(addr);
+ boot_spm_busy_wait();
+
+ /* Reenable RWW-section again. We need this if we want to jump
+ * back to the application after bootloading. */
+ boot_rww_enable();
+
+ uart_puts("OK");
+ return;
+ fail:
+ uart_puts("KO");
+}
+
+int main(void)
+{
+ int c;
+ uint32_t i=0;
+
+ UCSRxA = _BV(U2Xx);
+ UCSRxB = _BV(RXENx) | _BV(TXENx);
+ UCSRxC = _BV(UCSZx1) | _BV(UCSZx0); /* 8 bits no parity 1 stop */
+ UBRRx = 25; /* 57600 at 12 Mhz */
+
+ /* move interrupt vector in bootloader section */
+ MCUCR = (1 << IVCE);
+ MCUCR = (1 << IVSEL);
+
+ sei();
+
+ uart_puts("\r\ncmd> ");
+
+ /* timeout */
+ while ( !(UCSRxA & (1<<RXCx)) ) {
+ i++;
+ if (i>1000000) /* wait about 1 sec */
+ launch_app();
+ }
+
+ while (1) {
+ uart_puts("\r\ncmd> ");
+ c = uart_recv();
+ if (c == 'x')
+ launch_app();
+ else if (c == 'c')
+ crc_app();
+ else if (c == 'p')
+ prog_page();
+ else if (c == 'd')
+ read32();
+ else
+ uart_puts("p:prog_page c:crc x:exec d:dump32");
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright Droids Corporation, Microb Technology, Eirbot (2005)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:06 zer0 Exp $
+ *
+ */
+
+/* Droids-corp 2004 - Zer0
+ * config for uart module
+ */
+
+#ifndef UART_CONFIG_H
+#define UART_CONFIG_H
+
+#if UART_NUM == 0
+
+/* compile uart0 fonctions, undefine it to pass compilation */
+#define UART0_COMPILE
+
+/* enable uart0 if == 1, disable if == 0 */
+#define UART0_ENABLED 1
+
+/* enable uart0 interrupts if == 1, disable if == 0 */
+#define UART0_INTERRUPT_ENABLED 1
+
+#define UART0_BAUDRATE 57600
+
+#define UART0_USE_DOUBLE_SPEED 0
+
+#define UART0_RX_FIFO_SIZE 64
+#define UART0_TX_FIFO_SIZE 16
+
+#define UART0_NBITS 8
+#define UART0_PARITY UART_PARTITY_NONE
+#define UART0_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 1
+
+/* compile uart1 fonctions, undefine it to pass compilation */
+#define UART1_COMPILE
+
+/* enable uart1 if == 1, disable if == 0 */
+#define UART1_ENABLED 1
+
+/* enable uart1 interrupts if == 1, disable if == 0 */
+#define UART1_INTERRUPT_ENABLED 1
+
+#define UART1_BAUDRATE 57600
+
+#define UART1_USE_DOUBLE_SPEED 0
+
+#define UART1_RX_FIFO_SIZE 32
+#define UART1_TX_FIFO_SIZE 4
+
+#define UART1_NBITS 8
+#define UART1_PARITY UART_PARTITY_NONE
+#define UART1_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 2
+
+/* compile uart2 fonctions, undefine it to pass compilation */
+#define UART2_COMPILE
+
+/* enable uart2 if == 1, disable if == 0 */
+#define UART2_ENABLED 1
+
+/* enable uart2 interrupts if == 1, disable if == 0 */
+#define UART2_INTERRUPT_ENABLED 1
+
+#define UART2_BAUDRATE 57600
+
+#define UART2_USE_DOUBLE_SPEED 0
+
+#define UART2_RX_FIFO_SIZE 32
+#define UART2_TX_FIFO_SIZE 4
+
+#define UART2_NBITS 8
+#define UART2_PARITY UART_PARTITY_NONE
+#define UART2_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 3
+
+/* compile uart3 fonctions, undefine it to pass compilation */
+#define UART3_COMPILE
+
+/* enable uart3 if == 1, disable if == 0 */
+#define UART3_ENABLED 1
+
+/* enable uart3 interrupts if == 1, disable if == 0 */
+#define UART3_INTERRUPT_ENABLED 1
+
+#define UART3_BAUDRATE 57600
+
+#define UART3_USE_DOUBLE_SPEED 0
+
+#define UART3_RX_FIFO_SIZE 32
+#define UART3_TX_FIFO_SIZE 4
+
+#define UART3_NBITS 8
+#define UART3_PARITY UART_PARTITY_NONE
+#define UART3_STOP_BIT UART_STOP_BITS_1
+
+#endif /* uart num */
+
+#endif
+
git.droids-corp.org / fpv.git / commitdiff