=====================
The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
-for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox
-ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their
-virtual functions (VF) in SR-IOV context.
+for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
+ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s
+adapters as well as their virtual functions (VF) in SR-IOV context.
Information and documentation about these adapters can be found on the
`Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5.
- - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5.
+ - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield.
+ - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield.
- ``mprq_en`` parameter [int]
This option should be used in combination with ``txq_inline`` above.
- On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW:
+ On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without
+ Enhanced MPW:
- Disabled by default.
- In case ``txq_inline`` is set recommendation is 4.
- On ConnectX-5 with Enhanced MPW:
+ On ConnectX-5 and Bluefield with Enhanced MPW:
- Set to 8 by default.
- ``txq_mpw_en`` parameter [int]
A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
- enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
- TX burst function to pack up multiple packets in a single descriptor
- session in order to save PCI bandwidth and improve performance at the
- cost of a slightly higher CPU usage. When ``txq_inline`` is set along
- with ``txq_mpw_en``, TX burst function tries to copy entire packet data
- on to TX descriptor instead of including pointer of packet only if there
- is enough room remained in the descriptor. ``txq_inline`` sets
- per-descriptor space for either pointers or inlined packets. In addition,
- Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
- in the same descriptor.
+ enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefield.
+ MPS allows the TX burst function to pack up multiple packets in a
+ single descriptor session in order to save PCI bandwidth and improve
+ performance at the cost of a slightly higher CPU usage. When
+ ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries
+ to copy entire packet data on to TX descriptor instead of including
+ pointer of packet only if there is enough room remained in the
+ descriptor. ``txq_inline`` sets per-descriptor space for either pointers
+ or inlined packets. In addition, Enhanced MPS supports hybrid mode -
+ mixing inlined packets and pointers in the same descriptor.
This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
When those offloads are requested the MPS send function will not be used.
- It is currently only supported on the ConnectX-4 Lx and ConnectX-5
+ It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield
families of adapters. Enabled by default.
- ``txq_mpw_hdr_dseg_en`` parameter [int]
- ``tx_vec_en`` parameter [int]
- A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of
+ A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of
global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS.
This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
When those offloads are requested the MPS send function will not be used.
- Enabled by default on ConnectX-5.
+ Enabled by default on ConnectX-5 and Bluefield.
- ``rx_vec_en`` parameter [int]
- **libmlx5**
- Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5
- devices, it is automatically loaded by libibverbs.
+ Low-level user space driver library for Mellanox
+ ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded
+ by libibverbs.
This library basically implements send/receive calls to the hardware
queues.
Unlike most other PMDs, these modules must remain loaded and bound to
their devices:
- - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5
- devices and related Ethernet kernel network devices.
+ - mlx5_core: hardware driver managing Mellanox
+ ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel
+ network devices.
- mlx5_ib: InifiniBand device driver.
- ib_uverbs: user space driver for Verbs (entry point for libibverbs).
- **Firmware update**
- Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5
- adapters.
+ Mellanox OFED releases include firmware updates for
+ ConnectX-4/ConnectX-5/Bluefield adapters.
Because each release provides new features, these updates must be applied to
match the kernel modules and libraries they come with.
- ConnectX-4 Lx: **14.21.1000** and above.
- ConnectX-5: **16.21.1000** and above.
- ConnectX-5 Ex: **16.21.1000** and above.
+ - Bluefield: **18.99.3950** and above.
While these libraries and kernel modules are available on OpenFabrics
Alliance's `website <https://www.openfabrics.org/>`__ and provided by package
-------------
This section demonstrates how to launch **testpmd** with Mellanox
-ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5.
+ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5.
#. Load the kernel modules:
git.droids-corp.org / dpdk.git / commitdiff