container_of((*priv->rxqs)[idx],
struct mlx5_rxq_ctrl, rxq);
- if (mark) {
+ /*
+ * To support metadata register copy on Tx loopback,
+ * this must be always enabled (metadata may arive
+ * from other port - not from local flows only.
+ */
+ if (priv->config.dv_flow_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ mlx5_flow_ext_mreg_supported(dev)) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n = 1;
+ } else if (mark) {
rxq_ctrl->rxq.mark = 1;
rxq_ctrl->flow_mark_n++;
}
container_of((*priv->rxqs)[idx],
struct mlx5_rxq_ctrl, rxq);
- if (mark) {
+ if (priv->config.dv_flow_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ mlx5_flow_ext_mreg_supported(dev)) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n = 1;
+ } else if (mark) {
rxq_ctrl->flow_mark_n--;
rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
}
return 0;
}
+/* Declare flow create/destroy prototype in advance. */
+static struct rte_flow *
+flow_list_create(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error);
+
+static void
+flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ struct rte_flow *flow);
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * As mark_id is unique, if there's already a registered flow for the mark_id,
+ * return by increasing the reference counter of the resource. Otherwise, create
+ * the resource (mcp_res) and flow.
+ *
+ * Flow looks like,
+ * - If ingress port is ANY and reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For default flow (zero mark_id), flow is like,
+ * - If ingress port is ANY,
+ * reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param mark_id
+ * ID of MARK action, zero means default flow for META.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * Associated resource on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_mreg_copy_resource *
+flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_attr attr = {
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ .ingress = 1,
+ };
+ struct mlx5_rte_flow_item_tag tag_spec = {
+ .data = mark_id,
+ };
+ struct rte_flow_item items[] = {
+ [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
+ };
+ struct rte_flow_action_mark ftag = {
+ .id = mark_id,
+ };
+ struct mlx5_flow_action_copy_mreg cp_mreg = {
+ .dst = REG_B,
+ .src = 0,
+ };
+ struct rte_flow_action_jump jump = {
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ };
+ struct rte_flow_action actions[] = {
+ [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
+ };
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ int ret;
+
+ /* Fill the register fileds in the flow. */
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return NULL;
+ tag_spec.id = ret;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
+ if (ret < 0)
+ return NULL;
+ cp_mreg.src = ret;
+ /* Check if already registered. */
+ assert(priv->mreg_cp_tbl);
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, mark_id);
+ if (mcp_res) {
+ /* For non-default rule. */
+ if (mark_id)
+ mcp_res->refcnt++;
+ assert(mark_id || mcp_res->refcnt == 1);
+ return mcp_res;
+ }
+ /* Provide the full width of FLAG specific value. */
+ if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
+ tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
+ /* Build a new flow. */
+ if (mark_id) {
+ items[0] = (struct rte_flow_item){
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
+ .spec = &tag_spec,
+ };
+ items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_MARK,
+ .conf = &ftag,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[3] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ } else {
+ /* Default rule, wildcard match. */
+ attr.priority = MLX5_FLOW_PRIO_RSVD;
+ items[0] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ }
+ /* Build a new entry. */
+ mcp_res = rte_zmalloc(__func__, sizeof(*mcp_res), 0);
+ if (!mcp_res) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ /*
+ * The copy Flows are not included in any list. There
+ * ones are referenced from other Flows and can not
+ * be applied, removed, deleted in ardbitrary order
+ * by list traversing.
+ */
+ mcp_res->flow = flow_list_create(dev, NULL, &attr, items,
+ actions, false, error);
+ if (!mcp_res->flow)
+ goto error;
+ mcp_res->refcnt++;
+ mcp_res->hlist_ent.key = mark_id;
+ ret = mlx5_hlist_insert(priv->mreg_cp_tbl,
+ &mcp_res->hlist_ent);
+ assert(!ret);
+ if (ret)
+ goto error;
+ return mcp_res;
+error:
+ if (mcp_res->flow)
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ rte_free(mcp_res);
+ return NULL;
+}
+
+/**
+ * Release flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_del_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!mcp_res || !priv->mreg_cp_tbl)
+ return;
+ if (flow->copy_applied) {
+ assert(mcp_res->appcnt);
+ flow->copy_applied = 0;
+ --mcp_res->appcnt;
+ if (!mcp_res->appcnt)
+ flow_drv_remove(dev, mcp_res->flow);
+ }
+ /*
+ * We do not check availability of metadata registers here,
+ * because copy resources are allocated in this case.
+ */
+ if (--mcp_res->refcnt)
+ return;
+ assert(mcp_res->flow);
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ rte_free(mcp_res);
+ flow->mreg_copy = NULL;
+}
+
+/**
+ * Start flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_start_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+ int ret;
+
+ if (!mcp_res || flow->copy_applied)
+ return 0;
+ if (!mcp_res->appcnt) {
+ ret = flow_drv_apply(dev, mcp_res->flow, NULL);
+ if (ret)
+ return ret;
+ }
+ ++mcp_res->appcnt;
+ flow->copy_applied = 1;
+ return 0;
+}
+
+/**
+ * Stop flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_stop_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+
+ if (!mcp_res || !flow->copy_applied)
+ return;
+ assert(mcp_res->appcnt);
+ --mcp_res->appcnt;
+ flow->copy_applied = 0;
+ if (!mcp_res->appcnt)
+ flow_drv_remove(dev, mcp_res->flow);
+}
+
+/**
+ * Remove the default copy action from RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ /* Check if default flow is registered. */
+ if (!priv->mreg_cp_tbl)
+ return;
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, 0ULL);
+ if (!mcp_res)
+ return;
+ assert(mcp_res->flow);
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ rte_free(mcp_res);
+}
+
+/**
+ * Add the default copy action in in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 for success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!priv->config.dv_flow_en ||
+ priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ mcp_res = flow_mreg_add_copy_action(dev, 0, error);
+ if (!mcp_res)
+ return -rte_errno;
+ return 0;
+}
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * All the flow having Q/RSS action should be split by
+ * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
+ * performs the following,
+ * - CQE->flow_tag := reg_c[1] (MARK)
+ * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
+ * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
+ * but there should be a flow per each MARK ID set by MARK action.
+ *
+ * For the aforementioned reason, if there's a MARK action in flow's action
+ * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
+ * the MARK ID to CQE's flow_tag like,
+ * - If reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For SET_META action which stores value in reg_c[0], as the destination is
+ * also a flow metadata register (reg_b), adding a default flow is enough. Zero
+ * MARK ID means the default flow. The default flow looks like,
+ * - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to flow structure.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 on success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_update_copy_table(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ const struct rte_flow_action_mark *mark;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!config->dv_flow_en ||
+ config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ /* Find MARK action. */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ mcp_res = flow_mreg_add_copy_action
+ (dev, MLX5_FLOW_MARK_DEFAULT, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->mreg_copy = mcp_res;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ mark = (const struct rte_flow_action_mark *)
+ actions->conf;
+ mcp_res =
+ flow_mreg_add_copy_action(dev, mark->id, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->mreg_copy = mcp_res;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
#define MLX5_MAX_SPLIT_ACTIONS 24
#define MLX5_MAX_SPLIT_ITEMS 24
if (ret < 0)
goto error;
}
+ /*
+ * Update the metadata register copy table. If extensive
+ * metadata feature is enabled and registers are supported
+ * we might create the extra rte_flow for each unique
+ * MARK/FLAG action ID.
+ *
+ * The table is updated for ingress Flows only, because
+ * the egress Flows belong to the different device and
+ * copy table should be updated in peer NIC Rx domain.
+ */
+ if (attr->ingress &&
+ (external || attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP)) {
+ ret = flow_mreg_update_copy_table(dev, flow, actions, error);
+ if (ret)
+ goto error;
+ }
if (dev->data->dev_started) {
ret = flow_drv_apply(dev, flow, error);
if (ret < 0)
hairpin_id);
return NULL;
error:
+ assert(flow);
+ flow_mreg_del_copy_action(dev, flow);
ret = rte_errno; /* Save rte_errno before cleanup. */
if (flow->hairpin_flow_id)
mlx5_flow_id_release(priv->sh->flow_id_pool,
flow_drv_destroy(dev, flow);
if (list)
TAILQ_REMOVE(list, flow, next);
+ flow_mreg_del_copy_action(dev, flow);
rte_free(flow->fdir);
rte_free(flow);
}
{
struct rte_flow *flow;
- TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
+ TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next) {
flow_drv_remove(dev, flow);
+ flow_mreg_stop_copy_action(dev, flow);
+ }
+ flow_mreg_del_default_copy_action(dev);
flow_rxq_flags_clear(dev);
}
struct rte_flow_error error;
int ret = 0;
+ /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
+ ret = flow_mreg_add_default_copy_action(dev, &error);
+ if (ret < 0)
+ return -rte_errno;
+ /* Apply Flows created by application. */
TAILQ_FOREACH(flow, list, next) {
+ ret = flow_mreg_start_copy_action(dev, flow);
+ if (ret < 0)
+ goto error;
ret = flow_drv_apply(dev, flow, &error);
if (ret < 0)
goto error;