#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
#
# Compile generic ethernet library
#
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
#
# Compile generic ethernet library
#
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
#
# Compile generic ethernet library
#
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
#
# Compile generic ethernet library
#
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
#
# Compile generic ethernet library
#
DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl
+DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
--- /dev/null
+# BSD LICENSE
+#
+# Copyright 2014 6WIND S.A.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# - Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# - Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+#
+# - Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+# OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_kvargs.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) := rte_kvargs.c
+
+# install includes
+INCS := rte_kvargs.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_KVARGS)-include := $(INCS)
+
+# this lib needs eal and malloc
+DEPDIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += lib/librte_malloc
+
+include $(RTE_SDK)/mk/rte.lib.mk
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ * Copyright(c) 2014 6WIND S.A.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <sys/user.h>
+#include <linux/binfmts.h>
+
+#include <rte_malloc.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#include "rte_kvargs.h"
+
+/*
+ * Initialize a rte_kvargs structure to an empty key/value list.
+ */
+int
+rte_kvargs_init(struct rte_kvargs *kvlist)
+{
+ kvlist->count = 0;
+ kvlist->size = RTE_KVARGS_MAX;
+ memset(kvlist->pairs, 0, kvlist->size);
+ return 0;
+}
+
+/*
+ * Add a key-value pair at the end of a given key/value list.
+ * Return an error if the list is full or if the key is duplicated.
+ */
+static int
+rte_kvargs_add_pair(struct rte_kvargs *kvlist, char *key, char *val)
+{
+ unsigned i;
+ struct rte_kvargs_pair* entry;
+
+ /* is the list full? */
+ if (kvlist->count >= kvlist->size) {
+ RTE_LOG(ERR, PMD, "Couldn't add %s, key/value list is full\n", key);
+ return -1;
+ }
+
+ /* Check if the key is duplicated */
+ for (i = 0; i < kvlist->count; i++) {
+ entry = &kvlist->pairs[i];
+ if (strcmp(entry->key, key) == 0) {
+ RTE_LOG(ERR, PMD, "Couldn't add %s, duplicated key\n", key);
+ return -1;
+ }
+ }
+
+ entry = &kvlist->pairs[kvlist->count];
+ entry->key = key;
+ entry->value = val;
+ kvlist->count++;
+ return 0;
+}
+
+/*
+ * Receive a string with a list of arguments following the pattern
+ * key=value;key=value;... and insert them into the list.
+ * strtok() is used so the params string will be copied to be modified.
+ */
+static int
+rte_kvargs_tokenize(struct rte_kvargs *kvlist, const char *name,
+ const char *params)
+{
+ unsigned i, count;
+ char *args;
+ char *pairs[RTE_KVARGS_MAX];
+ char *pair[2];
+
+ /* If params are empty, nothing to do */
+ if (params == NULL || params[0] == 0) {
+ RTE_LOG(ERR, PMD, "Couldn't parse %s device, empty arguments\n", name);
+ return -1;
+ }
+
+ /* Copy the const char *params to a modifiable string
+ * to pass to rte_strsplit
+ */
+ args = strdup(params);
+ if(args == NULL){
+ RTE_LOG(ERR, PMD, "Couldn't parse %s device \n", name);
+ return -1;
+ }
+
+ count = rte_strsplit(args, strnlen(args, MAX_ARG_STRLEN), pairs,
+ RTE_KVARGS_MAX, RTE_KVARGS_PAIRS_DELIM);
+
+ for (i = 0; i < count; i++) {
+ pair[0] = NULL;
+ pair[1] = NULL;
+
+ rte_strsplit(pairs[i], strnlen(pairs[i], MAX_ARG_STRLEN), pair, 2,
+ RTE_KVARGS_KV_DELIM);
+
+ if (pair[0] == NULL || pair[1] == NULL || pair[0][0] == 0
+ || pair[1][0] == 0) {
+ RTE_LOG(ERR, PMD,
+ "Couldn't parse %s device, wrong key or value \n", name);
+ goto error;
+ }
+
+ if (rte_kvargs_add_pair(kvlist, pair[0], pair[1]) < 0)
+ goto error;
+ }
+ return 0;
+
+error:
+ rte_free(args);
+ return -1;
+}
+
+/*
+ * Determine whether a key is valid or not by looking
+ * into a list of valid keys.
+ */
+static int
+is_valid_key(const char *valid[], const char *key_match)
+{
+ const char **valid_ptr;
+
+ for (valid_ptr = valid; *valid_ptr != NULL; valid_ptr++)
+ if (strstr(key_match, *valid_ptr) != NULL)
+ return 1;
+ return 0;
+}
+
+/*
+ * Determine whether all keys are valid or not by looking
+ * into a list of valid keys.
+ */
+static int
+check_for_valid_keys(struct rte_kvargs *kvlist,
+ const char *valid[])
+{
+ unsigned i, ret;
+ struct rte_kvargs_pair *pair;
+
+ for (i = 0; i < kvlist->count; i++) {
+ pair = &kvlist->pairs[i];
+ ret = is_valid_key(valid, pair->key);
+ if (!ret) {
+ RTE_LOG(ERR, PMD,
+ "Error parsing device, invalid key <%s>\n",
+ pair->key);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Return the number of times a given arg_name exists in the key/value list.
+ * E.g. given a list = { rx = 0, rx = 1, tx = 2 } the number of args for
+ * arg "rx" will be 2.
+ */
+unsigned
+rte_kvargs_count(const struct rte_kvargs *kvlist, const char *key_match)
+{
+ const struct rte_kvargs_pair *pair;
+ unsigned i, ret;
+
+ ret = 0;
+ for (i = 0; i < kvlist->count; i++) {
+ pair = &kvlist->pairs[i];
+ if (strcmp(pair->key, key_match) == 0)
+ ret++;
+ }
+
+ return ret;
+}
+
+/*
+ * For each matching key, call the given handler function.
+ */
+int
+rte_kvargs_process(const struct rte_kvargs *kvlist,
+ const char *key_match,
+ arg_handler_t handler,
+ void *opaque_arg)
+{
+ const struct rte_kvargs_pair *pair;
+ unsigned i;
+
+ for (i = 0; i < kvlist->count; i++) {
+ pair = &kvlist->pairs[i];
+ if (strstr(pair->key, key_match) != NULL) {
+ if ((*handler)(pair->value, opaque_arg) < 0)
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Parse the arguments "key=value;key=value;..." string and return
+ * an allocated structure that contains a key/value list. Also
+ * check if only valid keys were used.
+ */
+int
+rte_kvargs_parse(struct rte_kvargs *kvlist,
+ const char *name,
+ const char *args,
+ const char *valid_keys[])
+{
+
+ int ret;
+
+ ret = rte_kvargs_tokenize(kvlist, name, args);
+ if (ret < 0)
+ return ret;
+
+ if (valid_keys == NULL)
+ return 0;
+
+ return check_for_valid_keys(kvlist, valid_keys);
+}
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ * Copyright(c) 2014 6WIND S.A.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_KVARGS_H_
+#define _RTE_KVARGS_H_
+
+/**
+ * @file
+ * RTE Argument parsing
+ *
+ * This module can be used to parse arguments whose format is
+ * key1=value1;key2=value2;key3=value3;...
+ *
+ * This file provides some helpers that are especially used by virtual
+ * ethernet devices at initialization for arguments parsing.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Maximum number of key/value associations */
+#define RTE_KVARGS_MAX 32
+
+/** separator character used between each pair */
+#define RTE_KVARGS_PAIRS_DELIM ';'
+
+/** separator character used between key and value */
+#define RTE_KVARGS_KV_DELIM '='
+
+/** Type of callback function used by rte_kvargs_process() */
+typedef int (*arg_handler_t)(char *value, void *opaque);
+
+/** A key/value association */
+struct rte_kvargs_pair {
+ char *key; /**< the name (key) of the association */
+ char *value; /**< the value associated to that key */
+};
+
+/** Store a list of key/value associations */
+struct rte_kvargs {
+ unsigned count; /**< number of entries in the list */
+ size_t size; /**< maximum number of entries */
+ struct rte_kvargs_pair pairs[RTE_KVARGS_MAX]; /**< list of key/values */
+};
+
+/**
+ * Initialize an empty rte_kvargs structure
+ *
+ * Set the content of the rte_kvargs structure given as a parameter
+ * to an empty list of key/value.
+ *
+ * @param kvlist
+ * The rte_kvargs structure
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+int rte_kvargs_init(struct rte_kvargs *kvlist);
+
+/**
+ * Append key/value associations in a rte_kvargs structure from a string
+ *
+ * The function fills a rte_kvargs structure from a string whose format
+ * is key1=value1;key2=value2;...
+ * The key/value associations are appended to those which are already
+ * present in the rte_kvargs structure.
+ *
+ * @param kvlist
+ * The rte_kvargs structure
+ * @param name
+ * The name of the driver
+ * @param args
+ * The input string containing the key/value associations
+ * @param valid_keys
+ * A list of valid keys (table of const char *, the last must be NULL).
+ * This argument is ignored if NULL
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+int rte_kvargs_parse(struct rte_kvargs *kvlist, const char *name,
+ const char *args, const char *valid_keys[]);
+
+/**
+ * Call a handler function for each key/value matching the key
+ *
+ * For each key/value association that matches the given key, calls the
+ * handler function with the for a given arg_name passing the value on the
+ * dictionary for that key and a given extra argument.
+ *
+ * @param kvlist
+ * The rte_kvargs structure
+ * @param key_match
+ * The key on which the handler should be called
+ * @param handler
+ * The function to call for each matching key
+ * @param opaque_arg
+ * A pointer passed unchanged to the handler
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+int rte_kvargs_process(const struct rte_kvargs *kvlist,
+ const char *key_match, arg_handler_t handler, void *opaque_arg);
+
+/**
+ * Count the number of associations matching the given key
+ *
+ * @param kvlist
+ * The rte_kvargs structure
+ * @param key_match
+ * The key that should match
+
+ * @return
+ * The number of entries
+ */
+unsigned rte_kvargs_count(const struct rte_kvargs *kvlist,
+ const char *key_match);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
LDLIBS += --start-group
+ifeq ($(CONFIG_RTE_LIBRTE_KVARGS),y)
+LDLIBS += -lrte_kvargs
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_MBUF),y)
LDLIBS += -lrte_mbuf
endif
git.droids-corp.org / dpdk.git / commitdiff