M: Dmitri Epshtein <dima@marvell.com>
M: Natalie Samsonov <nsamsono@marvell.com>
M: Jianbo Liu <jianbo.liu@arm.com>
-F: drivers/crypto/mrvl/
-F: doc/guides/cryptodevs/mrvl.rst
-F: doc/guides/cryptodevs/features/mrvl.ini
+F: drivers/crypto/mvsam/
+F: doc/guides/cryptodevs/mvsam.rst
+F: doc/guides/cryptodevs/features/mvsam.ini
Null Crypto
M: Declan Doherty <declan.doherty@intel.com>
#
# Compile PMD for Marvell Crypto device
#
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
#
# Compile generic security library
sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(PMD_MRVL_CRYPTO=)n,\1y,' $1/.config
+ sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
build_config_hook $1 $2 $3
+++ /dev/null
-; Supported features of the 'mrvl' crypto driver.
-;
-; Refer to default.ini for the full list of available PMD features.
-;
-[Features]
-Symmetric crypto = Y
-Sym operation chaining = Y
-
-;
-; Supported crypto algorithms of a default crypto driver.
-;
-[Cipher]
-AES CBC (128) = Y
-AES CBC (192) = Y
-AES CBC (256) = Y
-AES CTR (128) = Y
-AES CTR (192) = Y
-AES CTR (256) = Y
-3DES CBC = Y
-3DES CTR = Y
-
-;
-; Supported authentication algorithms of a default crypto driver.
-;
-[Auth]
-MD5 = Y
-MD5 HMAC = Y
-SHA1 = Y
-SHA1 HMAC = Y
-SHA256 = Y
-SHA256 HMAC = Y
-SHA384 = Y
-SHA384 HMAC = Y
-SHA512 = Y
-SHA512 HMAC = Y
-AES GMAC = Y
-
-;
-; Supported AEAD algorithms of a default crypto driver.
-;
-[AEAD]
-AES GCM (128) = Y
--- /dev/null
+; Supported features of the 'mvsam' crypto driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Symmetric crypto = Y
+Sym operation chaining = Y
+
+;
+; Supported crypto algorithms of a default crypto driver.
+;
+[Cipher]
+AES CBC (128) = Y
+AES CBC (192) = Y
+AES CBC (256) = Y
+AES CTR (128) = Y
+AES CTR (192) = Y
+AES CTR (256) = Y
+3DES CBC = Y
+3DES CTR = Y
+
+;
+; Supported authentication algorithms of a default crypto driver.
+;
+[Auth]
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
+AES GMAC = Y
+
+;
+; Supported AEAD algorithms of a default crypto driver.
+;
+[AEAD]
+AES GCM (128) = Y
dpaa_sec
kasumi
openssl
- mrvl
+ mvsam
null
scheduler
snow3g
+++ /dev/null
-.. BSD LICENSE
- Copyright(c) 2017 Marvell International Ltd.
- Copyright(c) 2017 Semihalf.
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of the copyright holder nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-MRVL Crypto Poll Mode Driver
-============================
-
-The MRVL CRYPTO PMD (**librte_crypto_mrvl_pmd**) provides poll mode crypto driver
-support by utilizing MUSDK library, which provides cryptographic operations
-acceleration by using Security Acceleration Engine (EIP197) directly from
-user-space with minimum overhead and high performance.
-
-Features
---------
-
-MRVL CRYPTO PMD has support for:
-
-* Symmetric crypto
-* Sym operation chaining
-* AES CBC (128)
-* AES CBC (192)
-* AES CBC (256)
-* AES CTR (128)
-* AES CTR (192)
-* AES CTR (256)
-* 3DES CBC
-* 3DES CTR
-* MD5
-* MD5 HMAC
-* SHA1
-* SHA1 HMAC
-* SHA256
-* SHA256 HMAC
-* SHA384
-* SHA384 HMAC
-* SHA512
-* SHA512 HMAC
-* AES GCM (128)
-
-Limitations
------------
-
-* Hardware only supports scenarios where ICV (digest buffer) is placed just
- after the authenticated data. Other placement will result in error.
-
-Installation
-------------
-
-MRVL CRYPTO PMD driver compilation is disabled by default due to external dependencies.
-Currently there are two driver specific compilation options in
-``config/common_base`` available:
-
-- ``CONFIG_RTE_LIBRTE_MRVL_CRYPTO`` (default ``n``)
-
- Toggle compilation of the librte_pmd_mrvl driver.
-
-- ``CONFIG_RTE_LIBRTE_MRVL_CRYPTO_DEBUG`` (default ``n``)
-
- Toggle display of debugging messages.
-
-For a list of prerequisites please refer to `Prerequisites` section in
-:ref:`MVPP2 Poll Mode Driver <mvpp2_poll_mode_driver>` guide.
-
-MRVL CRYPTO PMD requires MUSDK built with EIP197 support thus following
-extra option must be passed to the library configuration script:
-
-.. code-block:: console
-
- --enable-sam
-
-For `crypto_safexcel.ko` module build instructions please refer
-to `doc/musdk_get_started.txt`.
-
-Initialization
---------------
-
-After successfully building MRVL CRYPTO PMD, the following modules need to be
-loaded:
-
-.. code-block:: console
-
- insmod musdk_uio.ko
- insmod mvpp2x_sysfs.ko
- insmod mv_pp_uio.ko
- insmod mv_sam_uio.ko
- insmod crypto_safexcel.ko
-
-The following parameters (all optional) are exported by the driver:
-
-* max_nb_queue_pairs: maximum number of queue pairs in the device (8 by default).
-* max_nb_sessions: maximum number of sessions that can be created (2048 by default).
-* socket_id: socket on which to allocate the device resources on.
-
-l2fwd-crypto example application can be used to verify MRVL CRYPTO PMD
-operation:
-
-.. code-block:: console
-
- ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mrvl -- \
- --cipher_op ENCRYPT --cipher_algo aes-cbc \
- --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
- --auth_op GENERATE --auth_algo sha1-hmac \
- --auth_key 10:11:12:13:14:15:16:17:18:19:1a:1b:1c:1d:1e:1f
-
-Example output:
-
-.. code-block:: console
-
- [...]
- AAD: at [0x7f253ceb80], len=
- P ID 0 configuration ----
- Port mode : KR
- MAC status : disabled
- Link status : link up
- Port speed : 10G
- Port duplex : full
- Port: Egress enable tx_port_num=16 qmap=0x1
- PORT: Port0 - link
- P ID 0 configuration ----
- Port mode : KR
- MAC status : disabled
- Link status : link down
- Port speed : 10G
- Port duplex : full
- Port: Egress enable tx_port_num=16 qmap=0x1
- Port 0, MAC address: 00:50:43:02:21:20
-
-
- Checking link statusdone
- Port 0 Link Up - speed 0 Mbps - full-duplex
- Lcore 0: RX port 0
- Allocated session pool on socket 0
- eip197: 0:0 registers: paddr: 0xf2880000, vaddr: 0x0x7f56a80000
- DMA buffer (131136 bytes) for CDR #0 allocated: paddr = 0xb0585e00, vaddr = 0x7f09384e00
- DMA buffer (131136 bytes) for RDR #0 allocated: paddr = 0xb05a5f00, vaddr = 0x7f093a4f00
- DMA buffers allocated for 2049 operations. Tokens - 256 bytes
- Lcore 0: cryptodev 0
- L2FWD: lcore 1 has nothing to do
- L2FWD: lcore 2 has nothing to do
- L2FWD: lcore 3 has nothing to do
- L2FWD: entering main loop on lcore 0
- L2FWD: -- lcoreid=0 portid=0
- L2FWD: -- lcoreid=0 cryptoid=0
- Options:-
- nportmask: ffffffff
- ports per lcore: 1
- refresh period : 10000
- single lcore mode: disabled
- stats_printing: enabled
- sessionless crypto: disabled
-
- Crypto chain: Input --> Encrypt --> Auth generate --> Output
-
- ---- Cipher information ---
- Algorithm: aes-cbc
- Cipher key: at [0x7f56db4e80], len=16
- 00000000: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F | ................
- IV: at [0x7f56db4b80], len=16
- 00000000: 20 F0 63 0E 45 EB 2D 84 72 D4 13 6E 36 B5 AF FE | .c.E.-.r..n6...
-
- ---- Authentication information ---
- Algorithm: sha1-hmac
- Auth key: at [0x7f56db4d80], len=16
- 00000000: 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F | ................
- IV: at [0x7f56db4a80], len=0
- AAD: at [0x7f253ceb80], len=
--- /dev/null
+.. BSD LICENSE
+ Copyright(c) 2017 Marvell International Ltd.
+ Copyright(c) 2017 Semihalf.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of the copyright holder nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MVSAM Crypto Poll Mode Driver
+=============================
+
+The MVSAM CRYPTO PMD (**librte_crypto_mvsam_pmd**) provides poll mode crypto driver
+support by utilizing MUSDK library, which provides cryptographic operations
+acceleration by using Security Acceleration Engine (EIP197) directly from
+user-space with minimum overhead and high performance.
+
+Features
+--------
+
+MVSAM CRYPTO PMD has support for:
+
+* Symmetric crypto
+* Sym operation chaining
+* AES CBC (128)
+* AES CBC (192)
+* AES CBC (256)
+* AES CTR (128)
+* AES CTR (192)
+* AES CTR (256)
+* 3DES CBC
+* 3DES CTR
+* MD5
+* MD5 HMAC
+* SHA1
+* SHA1 HMAC
+* SHA256
+* SHA256 HMAC
+* SHA384
+* SHA384 HMAC
+* SHA512
+* SHA512 HMAC
+* AES GCM (128)
+
+Limitations
+-----------
+
+* Hardware only supports scenarios where ICV (digest buffer) is placed just
+ after the authenticated data. Other placement will result in error.
+
+Installation
+------------
+
+MVSAM CRYPTO PMD driver compilation is disabled by default due to external dependencies.
+Currently there are two driver specific compilation options in
+``config/common_base`` available:
+
+- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO`` (default ``n``)
+
+ Toggle compilation of the librte_pmd_mvsam driver.
+
+- ``CONFIG_RTE_LIBRTE_MVSAM_CRYPTO_DEBUG`` (default ``n``)
+
+ Toggle display of debugging messages.
+
+For a list of prerequisites please refer to `Prerequisites` section in
+:ref:`MVPP2 Poll Mode Driver <mvpp2_poll_mode_driver>` guide.
+
+MVSAM CRYPTO PMD requires MUSDK built with EIP197 support thus following
+extra option must be passed to the library configuration script:
+
+.. code-block:: console
+
+ --enable-sam
+
+For `crypto_safexcel.ko` module build instructions please refer
+to `doc/musdk_get_started.txt`.
+
+Initialization
+--------------
+
+After successfully building MVSAM CRYPTO PMD, the following modules need to be
+loaded:
+
+.. code-block:: console
+
+ insmod musdk_uio.ko
+ insmod mvpp2x_sysfs.ko
+ insmod mv_pp_uio.ko
+ insmod mv_sam_uio.ko
+ insmod crypto_safexcel.ko
+
+The following parameters (all optional) are exported by the driver:
+
+* max_nb_queue_pairs: maximum number of queue pairs in the device (8 by default).
+* max_nb_sessions: maximum number of sessions that can be created (2048 by default).
+* socket_id: socket on which to allocate the device resources on.
+
+l2fwd-crypto example application can be used to verify MVSAM CRYPTO PMD
+operation:
+
+.. code-block:: console
+
+ ./l2fwd-crypto --vdev=eth_mvpp2,iface=eth0 --vdev=crypto_mvsam -- \
+ --cipher_op ENCRYPT --cipher_algo aes-cbc \
+ --cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f \
+ --auth_op GENERATE --auth_algo sha1-hmac \
+ --auth_key 10:11:12:13:14:15:16:17:18:19:1a:1b:1c:1d:1e:1f
+
+Example output:
+
+.. code-block:: console
+
+ [...]
+ AAD: at [0x7f253ceb80], len=
+ P ID 0 configuration ----
+ Port mode : KR
+ MAC status : disabled
+ Link status : link up
+ Port speed : 10G
+ Port duplex : full
+ Port: Egress enable tx_port_num=16 qmap=0x1
+ PORT: Port0 - link
+ P ID 0 configuration ----
+ Port mode : KR
+ MAC status : disabled
+ Link status : link down
+ Port speed : 10G
+ Port duplex : full
+ Port: Egress enable tx_port_num=16 qmap=0x1
+ Port 0, MAC address: 00:50:43:02:21:20
+
+
+ Checking link statusdone
+ Port 0 Link Up - speed 0 Mbps - full-duplex
+ Lcore 0: RX port 0
+ Allocated session pool on socket 0
+ eip197: 0:0 registers: paddr: 0xf2880000, vaddr: 0x0x7f56a80000
+ DMA buffer (131136 bytes) for CDR #0 allocated: paddr = 0xb0585e00, vaddr = 0x7f09384e00
+ DMA buffer (131136 bytes) for RDR #0 allocated: paddr = 0xb05a5f00, vaddr = 0x7f093a4f00
+ DMA buffers allocated for 2049 operations. Tokens - 256 bytes
+ Lcore 0: cryptodev 0
+ L2FWD: lcore 1 has nothing to do
+ L2FWD: lcore 2 has nothing to do
+ L2FWD: lcore 3 has nothing to do
+ L2FWD: entering main loop on lcore 0
+ L2FWD: -- lcoreid=0 portid=0
+ L2FWD: -- lcoreid=0 cryptoid=0
+ Options:-
+ nportmask: ffffffff
+ ports per lcore: 1
+ refresh period : 10000
+ single lcore mode: disabled
+ stats_printing: enabled
+ sessionless crypto: disabled
+
+ Crypto chain: Input --> Encrypt --> Auth generate --> Output
+
+ ---- Cipher information ---
+ Algorithm: aes-cbc
+ Cipher key: at [0x7f56db4e80], len=16
+ 00000000: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F | ................
+ IV: at [0x7f56db4b80], len=16
+ 00000000: 20 F0 63 0E 45 EB 2D 84 72 D4 13 6E 36 B5 AF FE | .c.E.-.r..n6...
+
+ ---- Authentication information ---
+ Algorithm: sha1-hmac
+ Auth key: at [0x7f56db4d80], len=16
+ 00000000: 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F | ................
+ IV: at [0x7f56db4a80], len=0
+ AAD: at [0x7f253ceb80], len=
A new crypto PMD has been added, which provides several ciphering and hashing
algorithms. All cryptography operations use the MUSDK library crypto API.
- See the :doc:`../cryptodevs/mrvl` document for more details.
+ See the :doc:`../cryptodevs/mvsam` document for more details.
* **Add new benchmarking mode to dpdk-test-crypto-perf application.**
crypto_dpaa2_sec
crypto_armv8
crypto_scheduler
- crypto_mrvl
+ crypto_mvsam
* ``--optype <name>``
DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += zuc
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += mrvl
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += mvsam
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
-drivers = ['dpaa_sec', 'dpaa2_sec', 'mrvl',
+drivers = ['dpaa_sec', 'dpaa2_sec', 'mvsam',
'null', 'openssl', 'qat', 'virtio']
std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
+++ /dev/null
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Marvell International Ltd.
-# Copyright(c) 2017 Semihalf.
-# All rights reserved.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),config)
-ifeq ($(LIBMUSDK_PATH),)
-$(error "Please define LIBMUSDK_PATH environment variable")
-endif
-endif
-endif
-
-# library name
-LIB = librte_pmd_mrvl_crypto.a
-
-# build flags
-CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -I$(LIBMUSDK_PATH)/include
-CFLAGS += -DMVCONF_TYPES_PUBLIC
-CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
-
-# library version
-LIBABIVER := 1
-
-# versioning export map
-EXPORT_MAP := rte_pmd_mrvl_version.map
-
-# external library dependencies
-LDLIBS += -L$(LIBMUSDK_PATH)/lib -lmusdk
-LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
-LDLIBS += -lrte_cryptodev
-LDLIBS += -lrte_bus_vdev
-
-# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += rte_mrvl_pmd.c
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += rte_mrvl_pmd_ops.c
-
-include $(RTE_SDK)/mk/rte.lib.mk
+++ /dev/null
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2018 Marvell International Ltd.
-# Copyright(c) 2018 Semihalf.
-# All rights reserved.
-
-path = get_option('lib_musdk_dir')
-lib_dir = path + '/lib'
-inc_dir = path + '/include'
-
-lib = cc.find_library('libmusdk', dirs: [lib_dir], required: false)
-if not lib.found()
- build = false
-else
- ext_deps += lib
- includes += include_directories(inc_dir)
- cflags += ['-DMVCONF_TYPES_PUBLIC', '-DMVCONF_DMA_PHYS_ADDR_T_PUBLIC']
-endif
-
-sources = files('rte_mrvl_pmd.c', 'rte_mrvl_pmd_ops.c')
-
-deps += ['bus_vdev']
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2017 Marvell International Ltd.
- * Copyright(c) 2017 Semihalf.
- * All rights reserved.
- */
-
-#ifndef _RTE_MRVL_COMPAT_H_
-#define _RTE_MRVL_COMPAT_H_
-
-/* Unluckily, container_of is defined by both DPDK and MUSDK,
- * we'll declare only one version.
- *
- * Note that it is not used in this PMD anyway.
- */
-#ifdef container_of
-#undef container_of
-#endif
-#include "env/mv_autogen_comp_flags.h"
-#include "drivers/mv_sam.h"
-#include "drivers/mv_sam_cio.h"
-#include "drivers/mv_sam_session.h"
-
-#endif /* _RTE_MRVL_COMPAT_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2017 Marvell International Ltd.
- * Copyright(c) 2017 Semihalf.
- * All rights reserved.
- */
-
-#include <rte_common.h>
-#include <rte_hexdump.h>
-#include <rte_cryptodev.h>
-#include <rte_cryptodev_pmd.h>
-#include <rte_bus_vdev.h>
-#include <rte_malloc.h>
-#include <rte_cpuflags.h>
-
-#include "rte_mrvl_pmd_private.h"
-
-#define MRVL_MUSDK_DMA_MEMSIZE 41943040
-
-static uint8_t cryptodev_driver_id;
-
-/**
- * Flag if particular crypto algorithm is supported by PMD/MUSDK.
- *
- * The idea is to have Not Supported value as default (0).
- * This way we need only to define proper map sizes,
- * non-initialized entries will be by default not supported.
- */
-enum algo_supported {
- ALGO_NOT_SUPPORTED = 0,
- ALGO_SUPPORTED = 1,
-};
-
-/** Map elements for cipher mapping.*/
-struct cipher_params_mapping {
- enum algo_supported supported; /**< On/Off switch */
- enum sam_cipher_alg cipher_alg; /**< Cipher algorithm */
- enum sam_cipher_mode cipher_mode; /**< Cipher mode */
- unsigned int max_key_len; /**< Maximum key length (in bytes)*/
-}
-/* We want to squeeze in multiple maps into the cache line. */
-__rte_aligned(32);
-
-/** Map elements for auth mapping.*/
-struct auth_params_mapping {
- enum algo_supported supported; /**< On/off switch */
- enum sam_auth_alg auth_alg; /**< Auth algorithm */
-}
-/* We want to squeeze in multiple maps into the cache line. */
-__rte_aligned(32);
-
-/**
- * Map of supported cipher algorithms.
- */
-static const
-struct cipher_params_mapping cipher_map[RTE_CRYPTO_CIPHER_LIST_END] = {
- [RTE_CRYPTO_CIPHER_3DES_CBC] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_3DES,
- .cipher_mode = SAM_CIPHER_CBC,
- .max_key_len = BITS2BYTES(192) },
- [RTE_CRYPTO_CIPHER_3DES_CTR] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_3DES,
- .cipher_mode = SAM_CIPHER_CTR,
- .max_key_len = BITS2BYTES(192) },
- [RTE_CRYPTO_CIPHER_3DES_ECB] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_3DES,
- .cipher_mode = SAM_CIPHER_ECB,
- .max_key_len = BITS2BYTES(192) },
- [RTE_CRYPTO_CIPHER_AES_CBC] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_AES,
- .cipher_mode = SAM_CIPHER_CBC,
- .max_key_len = BITS2BYTES(256) },
- [RTE_CRYPTO_CIPHER_AES_CTR] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_AES,
- .cipher_mode = SAM_CIPHER_CTR,
- .max_key_len = BITS2BYTES(256) },
-};
-
-/**
- * Map of supported auth algorithms.
- */
-static const
-struct auth_params_mapping auth_map[RTE_CRYPTO_AUTH_LIST_END] = {
- [RTE_CRYPTO_AUTH_MD5_HMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HMAC_MD5 },
- [RTE_CRYPTO_AUTH_MD5] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_MD5 },
- [RTE_CRYPTO_AUTH_SHA1_HMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HMAC_SHA1 },
- [RTE_CRYPTO_AUTH_SHA1] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_SHA1 },
- [RTE_CRYPTO_AUTH_SHA224] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_SHA2_224 },
- [RTE_CRYPTO_AUTH_SHA256_HMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HMAC_SHA2_256 },
- [RTE_CRYPTO_AUTH_SHA256] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_SHA2_256 },
- [RTE_CRYPTO_AUTH_SHA384_HMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HMAC_SHA2_384 },
- [RTE_CRYPTO_AUTH_SHA384] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_SHA2_384 },
- [RTE_CRYPTO_AUTH_SHA512_HMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HMAC_SHA2_512 },
- [RTE_CRYPTO_AUTH_SHA512] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_HASH_SHA2_512 },
- [RTE_CRYPTO_AUTH_AES_GMAC] = {
- .supported = ALGO_SUPPORTED,
- .auth_alg = SAM_AUTH_AES_GMAC },
-};
-
-/**
- * Map of supported aead algorithms.
- */
-static const
-struct cipher_params_mapping aead_map[RTE_CRYPTO_AEAD_LIST_END] = {
- [RTE_CRYPTO_AEAD_AES_GCM] = {
- .supported = ALGO_SUPPORTED,
- .cipher_alg = SAM_CIPHER_AES,
- .cipher_mode = SAM_CIPHER_GCM,
- .max_key_len = BITS2BYTES(256) },
-};
-
-/*
- *-----------------------------------------------------------------------------
- * Forward declarations.
- *-----------------------------------------------------------------------------
- */
-static int cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev);
-
-/*
- *-----------------------------------------------------------------------------
- * Session Preparation.
- *-----------------------------------------------------------------------------
- */
-
-/**
- * Get xform chain order.
- *
- * @param xform Pointer to configuration structure chain for crypto operations.
- * @returns Order of crypto operations.
- */
-static enum mrvl_crypto_chain_order
-mrvl_crypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
-{
- /* Currently, Marvell supports max 2 operations in chain */
- if (xform->next != NULL && xform->next->next != NULL)
- return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
-
- if (xform->next != NULL) {
- if ((xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
- (xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER))
- return MRVL_CRYPTO_CHAIN_AUTH_CIPHER;
-
- if ((xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) &&
- (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH))
- return MRVL_CRYPTO_CHAIN_CIPHER_AUTH;
- } else {
- if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH)
- return MRVL_CRYPTO_CHAIN_AUTH_ONLY;
-
- if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
- return MRVL_CRYPTO_CHAIN_CIPHER_ONLY;
-
- if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD)
- return MRVL_CRYPTO_CHAIN_COMBINED;
- }
- return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
-}
-
-/**
- * Set session parameters for cipher part.
- *
- * @param sess Crypto session pointer.
- * @param cipher_xform Pointer to configuration structure for cipher operations.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-mrvl_crypto_set_cipher_session_parameters(struct mrvl_crypto_session *sess,
- const struct rte_crypto_sym_xform *cipher_xform)
-{
- /* Make sure we've got proper struct */
- if (cipher_xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
- MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
- return -EINVAL;
- }
-
- /* See if map data is present and valid */
- if ((cipher_xform->cipher.algo > RTE_DIM(cipher_map)) ||
- (cipher_map[cipher_xform->cipher.algo].supported
- != ALGO_SUPPORTED)) {
- MRVL_CRYPTO_LOG_ERR("Cipher algorithm not supported!");
- return -EINVAL;
- }
-
- sess->cipher_iv_offset = cipher_xform->cipher.iv.offset;
-
- sess->sam_sess_params.dir =
- (cipher_xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
- SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
- sess->sam_sess_params.cipher_alg =
- cipher_map[cipher_xform->cipher.algo].cipher_alg;
- sess->sam_sess_params.cipher_mode =
- cipher_map[cipher_xform->cipher.algo].cipher_mode;
-
- /* Assume IV will be passed together with data. */
- sess->sam_sess_params.cipher_iv = NULL;
-
- /* Get max key length. */
- if (cipher_xform->cipher.key.length >
- cipher_map[cipher_xform->cipher.algo].max_key_len) {
- MRVL_CRYPTO_LOG_ERR("Wrong key length!");
- return -EINVAL;
- }
-
- sess->sam_sess_params.cipher_key_len = cipher_xform->cipher.key.length;
- sess->sam_sess_params.cipher_key = cipher_xform->cipher.key.data;
-
- return 0;
-}
-
-/**
- * Set session parameters for authentication part.
- *
- * @param sess Crypto session pointer.
- * @param auth_xform Pointer to configuration structure for auth operations.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-mrvl_crypto_set_auth_session_parameters(struct mrvl_crypto_session *sess,
- const struct rte_crypto_sym_xform *auth_xform)
-{
- /* Make sure we've got proper struct */
- if (auth_xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
- MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
- return -EINVAL;
- }
-
- /* See if map data is present and valid */
- if ((auth_xform->auth.algo > RTE_DIM(auth_map)) ||
- (auth_map[auth_xform->auth.algo].supported != ALGO_SUPPORTED)) {
- MRVL_CRYPTO_LOG_ERR("Auth algorithm not supported!");
- return -EINVAL;
- }
-
- sess->sam_sess_params.dir =
- (auth_xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
- SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
- sess->sam_sess_params.auth_alg =
- auth_map[auth_xform->auth.algo].auth_alg;
- sess->sam_sess_params.u.basic.auth_icv_len =
- auth_xform->auth.digest_length;
- /* auth_key must be NULL if auth algorithm does not use HMAC */
- sess->sam_sess_params.auth_key = auth_xform->auth.key.length ?
- auth_xform->auth.key.data : NULL;
- sess->sam_sess_params.auth_key_len = auth_xform->auth.key.length;
-
- return 0;
-}
-
-/**
- * Set session parameters for aead part.
- *
- * @param sess Crypto session pointer.
- * @param aead_xform Pointer to configuration structure for aead operations.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-mrvl_crypto_set_aead_session_parameters(struct mrvl_crypto_session *sess,
- const struct rte_crypto_sym_xform *aead_xform)
-{
- /* Make sure we've got proper struct */
- if (aead_xform->type != RTE_CRYPTO_SYM_XFORM_AEAD) {
- MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
- return -EINVAL;
- }
-
- /* See if map data is present and valid */
- if ((aead_xform->aead.algo > RTE_DIM(aead_map)) ||
- (aead_map[aead_xform->aead.algo].supported
- != ALGO_SUPPORTED)) {
- MRVL_CRYPTO_LOG_ERR("AEAD algorithm not supported!");
- return -EINVAL;
- }
-
- sess->sam_sess_params.dir =
- (aead_xform->aead.op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
- SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
- sess->sam_sess_params.cipher_alg =
- aead_map[aead_xform->aead.algo].cipher_alg;
- sess->sam_sess_params.cipher_mode =
- aead_map[aead_xform->aead.algo].cipher_mode;
-
- /* Assume IV will be passed together with data. */
- sess->sam_sess_params.cipher_iv = NULL;
-
- /* Get max key length. */
- if (aead_xform->aead.key.length >
- aead_map[aead_xform->aead.algo].max_key_len) {
- MRVL_CRYPTO_LOG_ERR("Wrong key length!");
- return -EINVAL;
- }
-
- sess->sam_sess_params.cipher_key = aead_xform->aead.key.data;
- sess->sam_sess_params.cipher_key_len = aead_xform->aead.key.length;
-
- if (sess->sam_sess_params.cipher_mode == SAM_CIPHER_GCM)
- sess->sam_sess_params.auth_alg = SAM_AUTH_AES_GCM;
-
- sess->sam_sess_params.u.basic.auth_icv_len =
- aead_xform->aead.digest_length;
-
- sess->sam_sess_params.u.basic.auth_aad_len =
- aead_xform->aead.aad_length;
-
- return 0;
-}
-
-/**
- * Parse crypto transform chain and setup session parameters.
- *
- * @param dev Pointer to crypto device
- * @param sess Poiner to crypto session
- * @param xform Pointer to configuration structure chain for crypto operations.
- * @returns 0 in case of success, negative value otherwise.
- */
-int
-mrvl_crypto_set_session_parameters(struct mrvl_crypto_session *sess,
- const struct rte_crypto_sym_xform *xform)
-{
- const struct rte_crypto_sym_xform *cipher_xform = NULL;
- const struct rte_crypto_sym_xform *auth_xform = NULL;
- const struct rte_crypto_sym_xform *aead_xform = NULL;
-
- /* Filter out spurious/broken requests */
- if (xform == NULL)
- return -EINVAL;
-
- sess->chain_order = mrvl_crypto_get_chain_order(xform);
- switch (sess->chain_order) {
- case MRVL_CRYPTO_CHAIN_CIPHER_AUTH:
- cipher_xform = xform;
- auth_xform = xform->next;
- break;
- case MRVL_CRYPTO_CHAIN_AUTH_CIPHER:
- auth_xform = xform;
- cipher_xform = xform->next;
- break;
- case MRVL_CRYPTO_CHAIN_CIPHER_ONLY:
- cipher_xform = xform;
- break;
- case MRVL_CRYPTO_CHAIN_AUTH_ONLY:
- auth_xform = xform;
- break;
- case MRVL_CRYPTO_CHAIN_COMBINED:
- aead_xform = xform;
- break;
- default:
- return -EINVAL;
- }
-
- if ((cipher_xform != NULL) &&
- (mrvl_crypto_set_cipher_session_parameters(
- sess, cipher_xform) < 0)) {
- MRVL_CRYPTO_LOG_ERR("Invalid/unsupported cipher parameters");
- return -EINVAL;
- }
-
- if ((auth_xform != NULL) &&
- (mrvl_crypto_set_auth_session_parameters(
- sess, auth_xform) < 0)) {
- MRVL_CRYPTO_LOG_ERR("Invalid/unsupported auth parameters");
- return -EINVAL;
- }
-
- if ((aead_xform != NULL) &&
- (mrvl_crypto_set_aead_session_parameters(
- sess, aead_xform) < 0)) {
- MRVL_CRYPTO_LOG_ERR("Invalid/unsupported aead parameters");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- *-----------------------------------------------------------------------------
- * Process Operations
- *-----------------------------------------------------------------------------
- */
-
-/**
- * Prepare a single request.
- *
- * This function basically translates DPDK crypto request into one
- * understandable by MUDSK's SAM. If this is a first request in a session,
- * it starts the session.
- *
- * @param request Pointer to pre-allocated && reset request buffer [Out].
- * @param src_bd Pointer to pre-allocated source descriptor [Out].
- * @param dst_bd Pointer to pre-allocated destination descriptor [Out].
- * @param op Pointer to DPDK crypto operation struct [In].
- */
-static inline int
-mrvl_request_prepare(struct sam_cio_op_params *request,
- struct sam_buf_info *src_bd,
- struct sam_buf_info *dst_bd,
- struct rte_crypto_op *op)
-{
- struct mrvl_crypto_session *sess;
- struct rte_mbuf *dst_mbuf;
- uint8_t *digest;
-
- if (unlikely(op->sess_type == RTE_CRYPTO_OP_SESSIONLESS)) {
- MRVL_CRYPTO_LOG_ERR("MRVL CRYPTO PMD only supports session "
- "oriented requests, op (%p) is sessionless.",
- op);
- return -EINVAL;
- }
-
- sess = (struct mrvl_crypto_session *)get_session_private_data(
- op->sym->session, cryptodev_driver_id);
- if (unlikely(sess == NULL)) {
- MRVL_CRYPTO_LOG_ERR("Session was not created for this device");
- return -EINVAL;
- }
-
- /*
- * If application delivered us null dst buffer, it means it expects
- * us to deliver the result in src buffer.
- */
- dst_mbuf = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
-
- request->sa = sess->sam_sess;
- request->cookie = op;
-
- /* Single buffers only, sorry. */
- request->num_bufs = 1;
- request->src = src_bd;
- src_bd->vaddr = rte_pktmbuf_mtod(op->sym->m_src, void *);
- src_bd->paddr = rte_pktmbuf_iova(op->sym->m_src);
- src_bd->len = rte_pktmbuf_data_len(op->sym->m_src);
-
- /* Empty source. */
- if (rte_pktmbuf_data_len(op->sym->m_src) == 0) {
- /* EIP does not support 0 length buffers. */
- MRVL_CRYPTO_LOG_ERR("Buffer length == 0 not supported!");
- return -1;
- }
-
- /* Empty destination. */
- if (rte_pktmbuf_data_len(dst_mbuf) == 0) {
- /* Make dst buffer fit at least source data. */
- if (rte_pktmbuf_append(dst_mbuf,
- rte_pktmbuf_data_len(op->sym->m_src)) == NULL) {
- MRVL_CRYPTO_LOG_ERR("Unable to set big enough dst buffer!");
- return -1;
- }
- }
-
- request->dst = dst_bd;
- dst_bd->vaddr = rte_pktmbuf_mtod(dst_mbuf, void *);
- dst_bd->paddr = rte_pktmbuf_iova(dst_mbuf);
-
- /*
- * We can use all available space in dst_mbuf,
- * not only what's used currently.
- */
- dst_bd->len = dst_mbuf->buf_len - rte_pktmbuf_headroom(dst_mbuf);
-
- if (sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED) {
- request->cipher_len = op->sym->aead.data.length;
- request->cipher_offset = op->sym->aead.data.offset;
- request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
- sess->cipher_iv_offset);
-
- request->auth_aad = op->sym->aead.aad.data;
- request->auth_offset = request->cipher_offset;
- request->auth_len = request->cipher_len;
- } else {
- request->cipher_len = op->sym->cipher.data.length;
- request->cipher_offset = op->sym->cipher.data.offset;
- request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
- sess->cipher_iv_offset);
-
- request->auth_offset = op->sym->auth.data.offset;
- request->auth_len = op->sym->auth.data.length;
- }
-
- digest = sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED ?
- op->sym->aead.digest.data : op->sym->auth.digest.data;
- if (digest == NULL) {
- /* No auth - no worry. */
- return 0;
- }
-
- request->auth_icv_offset = request->auth_offset + request->auth_len;
-
- /*
- * EIP supports only scenarios where ICV(digest buffer) is placed at
- * auth_icv_offset. Any other placement means risking errors.
- */
- if (sess->sam_sess_params.dir == SAM_DIR_ENCRYPT) {
- /*
- * This should be the most common case anyway,
- * EIP will overwrite DST buffer at auth_icv_offset.
- */
- if (rte_pktmbuf_mtod_offset(
- dst_mbuf, uint8_t *,
- request->auth_icv_offset) == digest) {
- return 0;
- }
- } else {/* sess->sam_sess_params.dir == SAM_DIR_DECRYPT */
- /*
- * EIP will look for digest at auth_icv_offset
- * offset in SRC buffer.
- */
- if (rte_pktmbuf_mtod_offset(
- op->sym->m_src, uint8_t *,
- request->auth_icv_offset) == digest) {
- return 0;
- }
- }
-
- /*
- * If we landed here it means that digest pointer is
- * at different than expected place.
- */
- return -1;
-}
-
-/*
- *-----------------------------------------------------------------------------
- * PMD Framework handlers
- *-----------------------------------------------------------------------------
- */
-
-/**
- * Enqueue burst.
- *
- * @param queue_pair Pointer to queue pair.
- * @param ops Pointer to ops requests array.
- * @param nb_ops Number of elements in ops requests array.
- * @returns Number of elements consumed from ops.
- */
-static uint16_t
-mrvl_crypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
- uint16_t nb_ops)
-{
- uint16_t iter_ops = 0;
- uint16_t to_enq = 0;
- uint16_t consumed = 0;
- int ret;
- struct sam_cio_op_params requests[nb_ops];
- /*
- * DPDK uses single fragment buffers, so we can KISS descriptors.
- * SAM does not store bd pointers, so on-stack scope will be enough.
- */
- struct sam_buf_info src_bd[nb_ops];
- struct sam_buf_info dst_bd[nb_ops];
- struct mrvl_crypto_qp *qp = (struct mrvl_crypto_qp *)queue_pair;
-
- if (nb_ops == 0)
- return 0;
-
- /* Prepare the burst. */
- memset(&requests, 0, sizeof(requests));
-
- /* Iterate through */
- for (; iter_ops < nb_ops; ++iter_ops) {
- if (mrvl_request_prepare(&requests[iter_ops],
- &src_bd[iter_ops],
- &dst_bd[iter_ops],
- ops[iter_ops]) < 0) {
- MRVL_CRYPTO_LOG_ERR(
- "Error while parameters preparation!");
- qp->stats.enqueue_err_count++;
- ops[iter_ops]->status = RTE_CRYPTO_OP_STATUS_ERROR;
-
- /*
- * Number of handled ops is increased
- * (even if the result of handling is error).
- */
- ++consumed;
- break;
- }
-
- ops[iter_ops]->status =
- RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
-
- /* Increase the number of ops to enqueue. */
- ++to_enq;
- } /* for (; iter_ops < nb_ops;... */
-
- if (to_enq > 0) {
- /* Send the burst */
- ret = sam_cio_enq(qp->cio, requests, &to_enq);
- consumed += to_enq;
- if (ret < 0) {
- /*
- * Trust SAM that in this case returned value will be at
- * some point correct (now it is returned unmodified).
- */
- qp->stats.enqueue_err_count += to_enq;
- for (iter_ops = 0; iter_ops < to_enq; ++iter_ops)
- ops[iter_ops]->status =
- RTE_CRYPTO_OP_STATUS_ERROR;
- }
- }
-
- qp->stats.enqueued_count += to_enq;
- return consumed;
-}
-
-/**
- * Dequeue burst.
- *
- * @param queue_pair Pointer to queue pair.
- * @param ops Pointer to ops requests array.
- * @param nb_ops Number of elements in ops requests array.
- * @returns Number of elements dequeued.
- */
-static uint16_t
-mrvl_crypto_pmd_dequeue_burst(void *queue_pair,
- struct rte_crypto_op **ops,
- uint16_t nb_ops)
-{
- int ret;
- struct mrvl_crypto_qp *qp = queue_pair;
- struct sam_cio *cio = qp->cio;
- struct sam_cio_op_result results[nb_ops];
- uint16_t i;
-
- ret = sam_cio_deq(cio, results, &nb_ops);
- if (ret < 0) {
- /* Count all dequeued as error. */
- qp->stats.dequeue_err_count += nb_ops;
-
- /* But act as they were dequeued anyway*/
- qp->stats.dequeued_count += nb_ops;
-
- return 0;
- }
-
- /* Unpack and check results. */
- for (i = 0; i < nb_ops; ++i) {
- ops[i] = results[i].cookie;
-
- switch (results[i].status) {
- case SAM_CIO_OK:
- ops[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
- break;
- case SAM_CIO_ERR_ICV:
- MRVL_CRYPTO_LOG_DBG("CIO returned SAM_CIO_ERR_ICV.");
- ops[i]->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
- break;
- default:
- MRVL_CRYPTO_LOG_DBG(
- "CIO returned Error: %d", results[i].status);
- ops[i]->status = RTE_CRYPTO_OP_STATUS_ERROR;
- break;
- }
- }
-
- qp->stats.dequeued_count += nb_ops;
- return nb_ops;
-}
-
-/**
- * Create a new crypto device.
- *
- * @param name Driver name.
- * @param vdev Pointer to device structure.
- * @param init_params Pointer to initialization parameters.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-cryptodev_mrvl_crypto_create(const char *name,
- struct rte_vdev_device *vdev,
- struct rte_cryptodev_pmd_init_params *init_params)
-{
- struct rte_cryptodev *dev;
- struct mrvl_crypto_private *internals;
- struct sam_init_params sam_params;
- int ret;
-
- dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
- if (dev == NULL) {
- MRVL_CRYPTO_LOG_ERR("failed to create cryptodev vdev");
- goto init_error;
- }
-
- dev->driver_id = cryptodev_driver_id;
- dev->dev_ops = rte_mrvl_crypto_pmd_ops;
-
- /* Register rx/tx burst functions for data path. */
- dev->enqueue_burst = mrvl_crypto_pmd_enqueue_burst;
- dev->dequeue_burst = mrvl_crypto_pmd_dequeue_burst;
-
- dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
- RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
- RTE_CRYPTODEV_FF_HW_ACCELERATED;
-
- /* Set vector instructions mode supported */
- internals = dev->data->dev_private;
-
- internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
-
- /*
- * ret == -EEXIST is correct, it means DMA
- * has been already initialized.
- */
- ret = mv_sys_dma_mem_init(MRVL_MUSDK_DMA_MEMSIZE);
- if (ret < 0) {
- if (ret != -EEXIST)
- return ret;
-
- MRVL_CRYPTO_LOG_INFO(
- "DMA memory has been already initialized by a different driver.");
- }
-
- sam_params.max_num_sessions = internals->max_nb_sessions;
-
- return sam_init(&sam_params);
-
-init_error:
- MRVL_CRYPTO_LOG_ERR(
- "driver %s: %s failed", init_params->name, __func__);
-
- cryptodev_mrvl_crypto_uninit(vdev);
- return -EFAULT;
-}
-
-/**
- * Initialize the crypto device.
- *
- * @param vdev Pointer to device structure.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-cryptodev_mrvl_crypto_init(struct rte_vdev_device *vdev)
-{
- struct rte_cryptodev_pmd_init_params init_params = { };
- const char *name, *args;
- int ret;
-
- name = rte_vdev_device_name(vdev);
- if (name == NULL)
- return -EINVAL;
- args = rte_vdev_device_args(vdev);
-
- init_params.private_data_size = sizeof(struct mrvl_crypto_private);
- init_params.max_nb_queue_pairs = sam_get_num_inst() * SAM_HW_RING_NUM;
- init_params.max_nb_sessions =
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS;
- init_params.socket_id = rte_socket_id();
-
- ret = rte_cryptodev_pmd_parse_input_args(&init_params, args);
- if (ret) {
- RTE_LOG(ERR, PMD,
- "Failed to parse initialisation arguments[%s]\n",
- args);
- return -EINVAL;
- }
-
- return cryptodev_mrvl_crypto_create(name, vdev, &init_params);
-}
-
-/**
- * Uninitialize the crypto device
- *
- * @param vdev Pointer to device structure.
- * @returns 0 in case of success, negative value otherwise.
- */
-static int
-cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev)
-{
- struct rte_cryptodev *cryptodev;
- const char *name = rte_vdev_device_name(vdev);
-
- if (name == NULL)
- return -EINVAL;
-
- RTE_LOG(INFO, PMD,
- "Closing Marvell crypto device %s on numa socket %u\n",
- name, rte_socket_id());
-
- sam_deinit();
-
- cryptodev = rte_cryptodev_pmd_get_named_dev(name);
- if (cryptodev == NULL)
- return -ENODEV;
-
- return rte_cryptodev_pmd_destroy(cryptodev);
-}
-
-/**
- * Basic driver handlers for use in the constructor.
- */
-static struct rte_vdev_driver cryptodev_mrvl_pmd_drv = {
- .probe = cryptodev_mrvl_crypto_init,
- .remove = cryptodev_mrvl_crypto_uninit
-};
-
-static struct cryptodev_driver mrvl_crypto_drv;
-
-/* Register the driver in constructor. */
-RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_MRVL_PMD, cryptodev_mrvl_pmd_drv);
-RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_MRVL_PMD,
- "max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
- "socket_id=<int>");
-RTE_PMD_REGISTER_CRYPTO_DRIVER(mrvl_crypto_drv, cryptodev_mrvl_pmd_drv.driver,
- cryptodev_driver_id);
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2017 Marvell International Ltd.
- * Copyright(c) 2017 Semihalf.
- * All rights reserved.
- */
-
-#include <string.h>
-
-#include <rte_common.h>
-#include <rte_malloc.h>
-#include <rte_cryptodev_pmd.h>
-
-#include "rte_mrvl_pmd_private.h"
-
-/**
- * Capabilities list to be used in reporting to DPDK.
- */
-static const struct rte_cryptodev_capabilities
- mrvl_crypto_pmd_capabilities[] = {
- { /* MD5 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 1,
- .max = 64,
- .increment = 1
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* MD5 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_MD5,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA1 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 1,
- .max = 64,
- .increment = 1
- },
- .digest_size = {
- .min = 20,
- .max = 20,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA1 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA1,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 20,
- .max = 20,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA224 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA224,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 28,
- .max = 28,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA256 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 1,
- .max = 64,
- .increment = 1
- },
- .digest_size = {
- .min = 32,
- .max = 32,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA256 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA256,
- .block_size = 64,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 32,
- .max = 32,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA384 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
- .block_size = 128,
- .key_size = {
- .min = 1,
- .max = 128,
- .increment = 1
- },
- .digest_size = {
- .min = 48,
- .max = 48,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA384 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA384,
- .block_size = 128,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 48,
- .max = 48,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA512 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
- .block_size = 128,
- .key_size = {
- .min = 1,
- .max = 128,
- .increment = 1
- },
- .digest_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* SHA512 */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA512,
- .block_size = 128,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- }, }
- }, }
- },
- { /* AES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES GCM */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
- {.aead = {
- .algo = RTE_CRYPTO_AEAD_AES_GCM,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = {
- .min = 8,
- .max = 12,
- .increment = 4
- },
- .iv_size = {
- .min = 12,
- .max = 16,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* AES GMAC (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_GMAC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 65532,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* 3DES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
- .block_size = 8,
- .key_size = {
- .min = 24,
- .max = 24,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* 3DES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
- .block_size = 8,
- .key_size = {
- .min = 24,
- .max = 24,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
-
- RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
-};
-
-
-/**
- * Configure device (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param config Pointer to configuration structure.
- * @returns 0. Always.
- */
-static int
-mrvl_crypto_pmd_config(__rte_unused struct rte_cryptodev *dev,
- __rte_unused struct rte_cryptodev_config *config)
-{
- return 0;
-}
-
-/**
- * Start device (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @returns 0. Always.
- */
-static int
-mrvl_crypto_pmd_start(__rte_unused struct rte_cryptodev *dev)
-{
- return 0;
-}
-
-/**
- * Stop device (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @returns 0. Always.
- */
-static void
-mrvl_crypto_pmd_stop(__rte_unused struct rte_cryptodev *dev)
-{
-}
-
-/**
- * Get device statistics (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param stats Pointer to statistics structure [out].
- */
-static void
-mrvl_crypto_pmd_stats_get(struct rte_cryptodev *dev,
- struct rte_cryptodev_stats *stats)
-{
- int qp_id;
-
- for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
- struct mrvl_crypto_qp *qp = dev->data->queue_pairs[qp_id];
-
- stats->enqueued_count += qp->stats.enqueued_count;
- stats->dequeued_count += qp->stats.dequeued_count;
-
- stats->enqueue_err_count += qp->stats.enqueue_err_count;
- stats->dequeue_err_count += qp->stats.dequeue_err_count;
- }
-}
-
-/**
- * Reset device statistics (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- */
-static void
-mrvl_crypto_pmd_stats_reset(struct rte_cryptodev *dev)
-{
- int qp_id;
-
- for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
- struct mrvl_crypto_qp *qp = dev->data->queue_pairs[qp_id];
-
- memset(&qp->stats, 0, sizeof(qp->stats));
- }
-}
-
-/**
- * Get device info (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param dev_info Pointer to the device info structure [out].
- */
-static void
-mrvl_crypto_pmd_info_get(struct rte_cryptodev *dev,
- struct rte_cryptodev_info *dev_info)
-{
- struct mrvl_crypto_private *internals = dev->data->dev_private;
-
- if (dev_info != NULL) {
- dev_info->driver_id = dev->driver_id;
- dev_info->feature_flags = dev->feature_flags;
- dev_info->capabilities = mrvl_crypto_pmd_capabilities;
- dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
- }
-}
-
-/**
- * Release queue pair (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param qp_id ID of Queue Pair to release.
- * @returns 0. Always.
- */
-static int
-mrvl_crypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
-{
- struct mrvl_crypto_qp *qp =
- (struct mrvl_crypto_qp *)dev->data->queue_pairs[qp_id];
-
- if (dev->data->queue_pairs[qp_id] != NULL) {
- sam_cio_flush(qp->cio);
- sam_cio_deinit(qp->cio);
- rte_free(dev->data->queue_pairs[qp_id]);
- dev->data->queue_pairs[qp_id] = NULL;
- }
-
- return 0;
-}
-
-/**
- * Close device (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @returns 0. Always.
- */
-static int
-mrvl_crypto_pmd_close(struct rte_cryptodev *dev)
-{
- int qp_id;
-
- for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++)
- mrvl_crypto_pmd_qp_release(dev, qp_id);
-
- return 0;
-}
-
-/**
- * Setup a queue pair (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param qp_id ID of the Queue Pair.
- * @param qp_conf Queue pair configuration (nb of descriptors).
- * @param socket_id NUMA socket to allocate memory on.
- * @returns 0 upon success, negative value otherwise.
- */
-static int
-mrvl_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
- const struct rte_cryptodev_qp_conf *qp_conf,
- int socket_id, struct rte_mempool *session_pool)
-{
- struct mrvl_crypto_qp *qp = NULL;
- char match[RTE_CRYPTODEV_NAME_MAX_LEN];
- unsigned int n;
-
- /* Allocate the queue pair data structure. */
- qp = rte_zmalloc_socket("MRVL Crypto PMD Queue Pair", sizeof(*qp),
- RTE_CACHE_LINE_SIZE, socket_id);
- if (qp == NULL)
- return -ENOMEM;
-
- /* Free old qp prior setup if needed. */
- if (dev->data->queue_pairs[qp_id] != NULL)
- mrvl_crypto_pmd_qp_release(dev, qp_id);
-
- do { /* Error handling block */
-
- /*
- * This extra check is necessary due to a bug in
- * crypto library.
- */
- int num = sam_get_num_inst();
- if (num == 0) {
- MRVL_CRYPTO_LOG_ERR("No crypto engines detected.\n");
- return -1;
- }
-
- /*
- * In case two crypto engines are enabled qps will
- * be evenly spread among them. Even and odd qps will
- * be handled by cio-0 and cio-1 respectively. qp-cio mapping
- * will look as follows:
- *
- * qp: 0 1 2 3
- * cio-x:y: cio-0:0, cio-1:0, cio-0:1, cio-1:1
- *
- * qp: 4 5 6 7
- * cio-x:y: cio-0:2, cio-1:2, cio-0:3, cio-1:3
- *
- * In case just one engine is enabled mapping will look as
- * follows:
- * qp: 0 1 2 3
- * cio-x:y: cio-0:0, cio-0:1, cio-0:2, cio-0:3
- */
- n = snprintf(match, sizeof(match), "cio-%u:%u",
- qp_id % num, qp_id / num);
-
- if (n >= sizeof(match))
- break;
-
- qp->cio_params.match = match;
- qp->cio_params.size = qp_conf->nb_descriptors;
-
- if (sam_cio_init(&qp->cio_params, &qp->cio) < 0)
- break;
-
- qp->sess_mp = session_pool;
-
- memset(&qp->stats, 0, sizeof(qp->stats));
- dev->data->queue_pairs[qp_id] = qp;
- return 0;
- } while (0);
-
- rte_free(qp);
- return -1;
-}
-
-/** Start queue pair (PMD ops callback) - not supported.
- *
- * @param dev Pointer to the device structure.
- * @param qp_id ID of the Queue Pair.
- * @returns -ENOTSUP. Always.
- */
-static int
-mrvl_crypto_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
- __rte_unused uint16_t queue_pair_id)
-{
- return -ENOTSUP;
-}
-
-/** Stop queue pair (PMD ops callback) - not supported.
- *
- * @param dev Pointer to the device structure.
- * @param qp_id ID of the Queue Pair.
- * @returns -ENOTSUP. Always.
- */
-static int
-mrvl_crypto_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
- __rte_unused uint16_t queue_pair_id)
-{
- return -ENOTSUP;
-}
-
-/** Return the number of allocated queue pairs (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @returns Number of allocated queue pairs.
- */
-static uint32_t
-mrvl_crypto_pmd_qp_count(struct rte_cryptodev *dev)
-{
- return dev->data->nb_queue_pairs;
-}
-
-/** Returns the size of the session structure (PMD ops callback).
- *
- * @param dev Pointer to the device structure [Unused].
- * @returns Size of Marvell crypto session.
- */
-static unsigned
-mrvl_crypto_pmd_session_get_size(__rte_unused struct rte_cryptodev *dev)
-{
- return sizeof(struct mrvl_crypto_session);
-}
-
-/** Configure the session from a crypto xform chain (PMD ops callback).
- *
- * @param dev Pointer to the device structure.
- * @param xform Pointer to the crytpo configuration structure.
- * @param sess Pointer to the empty session structure.
- * @returns 0 upon success, negative value otherwise.
- */
-static int
-mrvl_crypto_pmd_session_configure(__rte_unused struct rte_cryptodev *dev,
- struct rte_crypto_sym_xform *xform,
- struct rte_cryptodev_sym_session *sess,
- struct rte_mempool *mp)
-{
- struct mrvl_crypto_session *mrvl_sess;
- void *sess_private_data;
- int ret;
-
- if (sess == NULL) {
- MRVL_CRYPTO_LOG_ERR("Invalid session struct.");
- return -EINVAL;
- }
-
- if (rte_mempool_get(mp, &sess_private_data)) {
- CDEV_LOG_ERR("Couldn't get object from session mempool.");
- return -ENOMEM;
- }
-
- ret = mrvl_crypto_set_session_parameters(sess_private_data, xform);
- if (ret != 0) {
- MRVL_CRYPTO_LOG_ERR("Failed to configure session parameters.");
-
- /* Return session to mempool */
- rte_mempool_put(mp, sess_private_data);
- return ret;
- }
-
- set_session_private_data(sess, dev->driver_id, sess_private_data);
-
- mrvl_sess = (struct mrvl_crypto_session *)sess_private_data;
- if (sam_session_create(&mrvl_sess->sam_sess_params,
- &mrvl_sess->sam_sess) < 0) {
- MRVL_CRYPTO_LOG_DBG("Failed to create session!");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * Clear the memory of session so it doesn't leave key material behind.
- *
- * @param dev Pointer to the device structure.
- * @returns 0. Always.
- */
-static void
-mrvl_crypto_pmd_session_clear(struct rte_cryptodev *dev,
- struct rte_cryptodev_sym_session *sess)
-{
-
- uint8_t index = dev->driver_id;
- void *sess_priv = get_session_private_data(sess, index);
-
- /* Zero out the whole structure */
- if (sess_priv) {
- struct mrvl_crypto_session *mrvl_sess =
- (struct mrvl_crypto_session *)sess_priv;
-
- if (mrvl_sess->sam_sess &&
- sam_session_destroy(mrvl_sess->sam_sess) < 0) {
- MRVL_CRYPTO_LOG_INFO("Error while destroying session!");
- }
-
- memset(sess, 0, sizeof(struct mrvl_crypto_session));
- struct rte_mempool *sess_mp = rte_mempool_from_obj(sess_priv);
- set_session_private_data(sess, index, NULL);
- rte_mempool_put(sess_mp, sess_priv);
- }
-}
-
-/**
- * PMD handlers for crypto ops.
- */
-static struct rte_cryptodev_ops mrvl_crypto_pmd_ops = {
- .dev_configure = mrvl_crypto_pmd_config,
- .dev_start = mrvl_crypto_pmd_start,
- .dev_stop = mrvl_crypto_pmd_stop,
- .dev_close = mrvl_crypto_pmd_close,
-
- .dev_infos_get = mrvl_crypto_pmd_info_get,
-
- .stats_get = mrvl_crypto_pmd_stats_get,
- .stats_reset = mrvl_crypto_pmd_stats_reset,
-
- .queue_pair_setup = mrvl_crypto_pmd_qp_setup,
- .queue_pair_release = mrvl_crypto_pmd_qp_release,
- .queue_pair_start = mrvl_crypto_pmd_qp_start,
- .queue_pair_stop = mrvl_crypto_pmd_qp_stop,
- .queue_pair_count = mrvl_crypto_pmd_qp_count,
-
- .session_get_size = mrvl_crypto_pmd_session_get_size,
- .session_configure = mrvl_crypto_pmd_session_configure,
- .session_clear = mrvl_crypto_pmd_session_clear
-};
-
-struct rte_cryptodev_ops *rte_mrvl_crypto_pmd_ops = &mrvl_crypto_pmd_ops;
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2017 Marvell International Ltd.
- * Copyright(c) 2017 Semihalf.
- * All rights reserved.
- */
-
-#ifndef _RTE_MRVL_PMD_PRIVATE_H_
-#define _RTE_MRVL_PMD_PRIVATE_H_
-
-#include "rte_mrvl_compat.h"
-
-#define CRYPTODEV_NAME_MRVL_PMD crypto_mrvl
-/**< Marvell PMD device name */
-
-#define MRVL_CRYPTO_LOG_ERR(fmt, args...) \
- RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
- __func__, __LINE__, ## args)
-
-#ifdef RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG
-#define MRVL_CRYPTO_LOG_INFO(fmt, args...) \
- RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
- __func__, __LINE__, ## args)
-
-#define MRVL_CRYPTO_LOG_DBG(fmt, args...) \
- RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
- __func__, __LINE__, ## args)
-
-#else
-#define MRVL_CRYPTO_LOG_INFO(fmt, args...)
-#define MRVL_CRYPTO_LOG_DBG(fmt, args...)
-#endif
-
-/**
- * Handy bits->bytes conversion macro.
- */
-#define BITS2BYTES(x) ((x) >> 3)
-
-/** The operation order mode enumerator. */
-enum mrvl_crypto_chain_order {
- MRVL_CRYPTO_CHAIN_CIPHER_ONLY,
- MRVL_CRYPTO_CHAIN_AUTH_ONLY,
- MRVL_CRYPTO_CHAIN_CIPHER_AUTH,
- MRVL_CRYPTO_CHAIN_AUTH_CIPHER,
- MRVL_CRYPTO_CHAIN_COMBINED,
- MRVL_CRYPTO_CHAIN_NOT_SUPPORTED,
-};
-
-/** Private data structure for each crypto device. */
-struct mrvl_crypto_private {
- unsigned int max_nb_qpairs; /**< Max number of queue pairs */
- unsigned int max_nb_sessions; /**< Max number of sessions */
-};
-
-/** MRVL crypto queue pair structure. */
-struct mrvl_crypto_qp {
- /** SAM CIO (MUSDK Queue Pair equivalent).*/
- struct sam_cio *cio;
-
- /** Session Mempool. */
- struct rte_mempool *sess_mp;
-
- /** Queue pair statistics. */
- struct rte_cryptodev_stats stats;
-
- /** CIO initialization parameters.*/
- struct sam_cio_params cio_params;
-} __rte_cache_aligned;
-
-/** MRVL crypto private session structure. */
-struct mrvl_crypto_session {
- /** Crypto operations chain order. */
- enum mrvl_crypto_chain_order chain_order;
-
- /** Session initialization parameters. */
- struct sam_session_params sam_sess_params;
-
- /** SAM session pointer. */
- struct sam_sa *sam_sess;
-
- /** Cipher IV offset. */
- uint16_t cipher_iv_offset;
-} __rte_cache_aligned;
-
-/** Set and validate MRVL crypto session parameters */
-extern int
-mrvl_crypto_set_session_parameters(struct mrvl_crypto_session *sess,
- const struct rte_crypto_sym_xform *xform);
-
-/** device specific operations function pointer structure */
-extern struct rte_cryptodev_ops *rte_mrvl_crypto_pmd_ops;
-
-#endif /* _RTE_MRVL_PMD_PRIVATE_H_ */
+++ /dev/null
-DPDK_17.11 {
- local: *;
-};
--- /dev/null
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Marvell International Ltd.
+# Copyright(c) 2017 Semihalf.
+# All rights reserved.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),config)
+ifeq ($(LIBMUSDK_PATH),)
+$(error "Please define LIBMUSDK_PATH environment variable")
+endif
+endif
+endif
+
+# library name
+LIB = librte_pmd_mvsam_crypto.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -I$(LIBMUSDK_PATH)/include
+CFLAGS += -DMVCONF_TYPES_PUBLIC
+CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_mvsam_version.map
+
+# external library dependencies
+LDLIBS += -L$(LIBMUSDK_PATH)/lib -lmusdk
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
+LDLIBS += -lrte_cryptodev
+LDLIBS += -lrte_bus_vdev
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += rte_mrvl_pmd_ops.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
--- /dev/null
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Marvell International Ltd.
+# Copyright(c) 2018 Semihalf.
+# All rights reserved.
+
+path = get_option('lib_musdk_dir')
+lib_dir = path + '/lib'
+inc_dir = path + '/include'
+
+lib = cc.find_library('libmusdk', dirs: [lib_dir], required: false)
+if not lib.found()
+ build = false
+else
+ ext_deps += lib
+ includes += include_directories(inc_dir)
+ cflags += ['-DMVCONF_TYPES_PUBLIC', '-DMVCONF_DMA_PHYS_ADDR_T_PUBLIC']
+endif
+
+sources = files('rte_mrvl_pmd.c', 'rte_mrvl_pmd_ops.c')
+
+deps += ['bus_vdev']
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Marvell International Ltd.
+ * Copyright(c) 2017 Semihalf.
+ * All rights reserved.
+ */
+
+#ifndef _RTE_MRVL_COMPAT_H_
+#define _RTE_MRVL_COMPAT_H_
+
+/* Unluckily, container_of is defined by both DPDK and MUSDK,
+ * we'll declare only one version.
+ *
+ * Note that it is not used in this PMD anyway.
+ */
+#ifdef container_of
+#undef container_of
+#endif
+#include "env/mv_autogen_comp_flags.h"
+#include "drivers/mv_sam.h"
+#include "drivers/mv_sam_cio.h"
+#include "drivers/mv_sam_session.h"
+
+#endif /* _RTE_MRVL_COMPAT_H_ */
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Marvell International Ltd.
+ * Copyright(c) 2017 Semihalf.
+ * All rights reserved.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_bus_vdev.h>
+#include <rte_malloc.h>
+#include <rte_cpuflags.h>
+
+#include "rte_mrvl_pmd_private.h"
+
+#define MRVL_MUSDK_DMA_MEMSIZE 41943040
+
+static uint8_t cryptodev_driver_id;
+
+/**
+ * Flag if particular crypto algorithm is supported by PMD/MUSDK.
+ *
+ * The idea is to have Not Supported value as default (0).
+ * This way we need only to define proper map sizes,
+ * non-initialized entries will be by default not supported.
+ */
+enum algo_supported {
+ ALGO_NOT_SUPPORTED = 0,
+ ALGO_SUPPORTED = 1,
+};
+
+/** Map elements for cipher mapping.*/
+struct cipher_params_mapping {
+ enum algo_supported supported; /**< On/Off switch */
+ enum sam_cipher_alg cipher_alg; /**< Cipher algorithm */
+ enum sam_cipher_mode cipher_mode; /**< Cipher mode */
+ unsigned int max_key_len; /**< Maximum key length (in bytes)*/
+}
+/* We want to squeeze in multiple maps into the cache line. */
+__rte_aligned(32);
+
+/** Map elements for auth mapping.*/
+struct auth_params_mapping {
+ enum algo_supported supported; /**< On/off switch */
+ enum sam_auth_alg auth_alg; /**< Auth algorithm */
+}
+/* We want to squeeze in multiple maps into the cache line. */
+__rte_aligned(32);
+
+/**
+ * Map of supported cipher algorithms.
+ */
+static const
+struct cipher_params_mapping cipher_map[RTE_CRYPTO_CIPHER_LIST_END] = {
+ [RTE_CRYPTO_CIPHER_3DES_CBC] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_3DES,
+ .cipher_mode = SAM_CIPHER_CBC,
+ .max_key_len = BITS2BYTES(192) },
+ [RTE_CRYPTO_CIPHER_3DES_CTR] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_3DES,
+ .cipher_mode = SAM_CIPHER_CTR,
+ .max_key_len = BITS2BYTES(192) },
+ [RTE_CRYPTO_CIPHER_3DES_ECB] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_3DES,
+ .cipher_mode = SAM_CIPHER_ECB,
+ .max_key_len = BITS2BYTES(192) },
+ [RTE_CRYPTO_CIPHER_AES_CBC] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_AES,
+ .cipher_mode = SAM_CIPHER_CBC,
+ .max_key_len = BITS2BYTES(256) },
+ [RTE_CRYPTO_CIPHER_AES_CTR] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_AES,
+ .cipher_mode = SAM_CIPHER_CTR,
+ .max_key_len = BITS2BYTES(256) },
+};
+
+/**
+ * Map of supported auth algorithms.
+ */
+static const
+struct auth_params_mapping auth_map[RTE_CRYPTO_AUTH_LIST_END] = {
+ [RTE_CRYPTO_AUTH_MD5_HMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HMAC_MD5 },
+ [RTE_CRYPTO_AUTH_MD5] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_MD5 },
+ [RTE_CRYPTO_AUTH_SHA1_HMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HMAC_SHA1 },
+ [RTE_CRYPTO_AUTH_SHA1] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_SHA1 },
+ [RTE_CRYPTO_AUTH_SHA224] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_SHA2_224 },
+ [RTE_CRYPTO_AUTH_SHA256_HMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HMAC_SHA2_256 },
+ [RTE_CRYPTO_AUTH_SHA256] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_SHA2_256 },
+ [RTE_CRYPTO_AUTH_SHA384_HMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HMAC_SHA2_384 },
+ [RTE_CRYPTO_AUTH_SHA384] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_SHA2_384 },
+ [RTE_CRYPTO_AUTH_SHA512_HMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HMAC_SHA2_512 },
+ [RTE_CRYPTO_AUTH_SHA512] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_HASH_SHA2_512 },
+ [RTE_CRYPTO_AUTH_AES_GMAC] = {
+ .supported = ALGO_SUPPORTED,
+ .auth_alg = SAM_AUTH_AES_GMAC },
+};
+
+/**
+ * Map of supported aead algorithms.
+ */
+static const
+struct cipher_params_mapping aead_map[RTE_CRYPTO_AEAD_LIST_END] = {
+ [RTE_CRYPTO_AEAD_AES_GCM] = {
+ .supported = ALGO_SUPPORTED,
+ .cipher_alg = SAM_CIPHER_AES,
+ .cipher_mode = SAM_CIPHER_GCM,
+ .max_key_len = BITS2BYTES(256) },
+};
+
+/*
+ *-----------------------------------------------------------------------------
+ * Forward declarations.
+ *-----------------------------------------------------------------------------
+ */
+static int cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev);
+
+/*
+ *-----------------------------------------------------------------------------
+ * Session Preparation.
+ *-----------------------------------------------------------------------------
+ */
+
+/**
+ * Get xform chain order.
+ *
+ * @param xform Pointer to configuration structure chain for crypto operations.
+ * @returns Order of crypto operations.
+ */
+static enum mrvl_crypto_chain_order
+mrvl_crypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+ /* Currently, Marvell supports max 2 operations in chain */
+ if (xform->next != NULL && xform->next->next != NULL)
+ return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
+
+ if (xform->next != NULL) {
+ if ((xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
+ (xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER))
+ return MRVL_CRYPTO_CHAIN_AUTH_CIPHER;
+
+ if ((xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) &&
+ (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH))
+ return MRVL_CRYPTO_CHAIN_CIPHER_AUTH;
+ } else {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ return MRVL_CRYPTO_CHAIN_AUTH_ONLY;
+
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
+ return MRVL_CRYPTO_CHAIN_CIPHER_ONLY;
+
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD)
+ return MRVL_CRYPTO_CHAIN_COMBINED;
+ }
+ return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
+}
+
+/**
+ * Set session parameters for cipher part.
+ *
+ * @param sess Crypto session pointer.
+ * @param cipher_xform Pointer to configuration structure for cipher operations.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_crypto_set_cipher_session_parameters(struct mrvl_crypto_session *sess,
+ const struct rte_crypto_sym_xform *cipher_xform)
+{
+ /* Make sure we've got proper struct */
+ if (cipher_xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
+ return -EINVAL;
+ }
+
+ /* See if map data is present and valid */
+ if ((cipher_xform->cipher.algo > RTE_DIM(cipher_map)) ||
+ (cipher_map[cipher_xform->cipher.algo].supported
+ != ALGO_SUPPORTED)) {
+ MRVL_CRYPTO_LOG_ERR("Cipher algorithm not supported!");
+ return -EINVAL;
+ }
+
+ sess->cipher_iv_offset = cipher_xform->cipher.iv.offset;
+
+ sess->sam_sess_params.dir =
+ (cipher_xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
+ sess->sam_sess_params.cipher_alg =
+ cipher_map[cipher_xform->cipher.algo].cipher_alg;
+ sess->sam_sess_params.cipher_mode =
+ cipher_map[cipher_xform->cipher.algo].cipher_mode;
+
+ /* Assume IV will be passed together with data. */
+ sess->sam_sess_params.cipher_iv = NULL;
+
+ /* Get max key length. */
+ if (cipher_xform->cipher.key.length >
+ cipher_map[cipher_xform->cipher.algo].max_key_len) {
+ MRVL_CRYPTO_LOG_ERR("Wrong key length!");
+ return -EINVAL;
+ }
+
+ sess->sam_sess_params.cipher_key_len = cipher_xform->cipher.key.length;
+ sess->sam_sess_params.cipher_key = cipher_xform->cipher.key.data;
+
+ return 0;
+}
+
+/**
+ * Set session parameters for authentication part.
+ *
+ * @param sess Crypto session pointer.
+ * @param auth_xform Pointer to configuration structure for auth operations.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_crypto_set_auth_session_parameters(struct mrvl_crypto_session *sess,
+ const struct rte_crypto_sym_xform *auth_xform)
+{
+ /* Make sure we've got proper struct */
+ if (auth_xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
+ MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
+ return -EINVAL;
+ }
+
+ /* See if map data is present and valid */
+ if ((auth_xform->auth.algo > RTE_DIM(auth_map)) ||
+ (auth_map[auth_xform->auth.algo].supported != ALGO_SUPPORTED)) {
+ MRVL_CRYPTO_LOG_ERR("Auth algorithm not supported!");
+ return -EINVAL;
+ }
+
+ sess->sam_sess_params.dir =
+ (auth_xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
+ SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
+ sess->sam_sess_params.auth_alg =
+ auth_map[auth_xform->auth.algo].auth_alg;
+ sess->sam_sess_params.u.basic.auth_icv_len =
+ auth_xform->auth.digest_length;
+ /* auth_key must be NULL if auth algorithm does not use HMAC */
+ sess->sam_sess_params.auth_key = auth_xform->auth.key.length ?
+ auth_xform->auth.key.data : NULL;
+ sess->sam_sess_params.auth_key_len = auth_xform->auth.key.length;
+
+ return 0;
+}
+
+/**
+ * Set session parameters for aead part.
+ *
+ * @param sess Crypto session pointer.
+ * @param aead_xform Pointer to configuration structure for aead operations.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+mrvl_crypto_set_aead_session_parameters(struct mrvl_crypto_session *sess,
+ const struct rte_crypto_sym_xform *aead_xform)
+{
+ /* Make sure we've got proper struct */
+ if (aead_xform->type != RTE_CRYPTO_SYM_XFORM_AEAD) {
+ MRVL_CRYPTO_LOG_ERR("Wrong xform struct provided!");
+ return -EINVAL;
+ }
+
+ /* See if map data is present and valid */
+ if ((aead_xform->aead.algo > RTE_DIM(aead_map)) ||
+ (aead_map[aead_xform->aead.algo].supported
+ != ALGO_SUPPORTED)) {
+ MRVL_CRYPTO_LOG_ERR("AEAD algorithm not supported!");
+ return -EINVAL;
+ }
+
+ sess->sam_sess_params.dir =
+ (aead_xform->aead.op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
+ SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
+ sess->sam_sess_params.cipher_alg =
+ aead_map[aead_xform->aead.algo].cipher_alg;
+ sess->sam_sess_params.cipher_mode =
+ aead_map[aead_xform->aead.algo].cipher_mode;
+
+ /* Assume IV will be passed together with data. */
+ sess->sam_sess_params.cipher_iv = NULL;
+
+ /* Get max key length. */
+ if (aead_xform->aead.key.length >
+ aead_map[aead_xform->aead.algo].max_key_len) {
+ MRVL_CRYPTO_LOG_ERR("Wrong key length!");
+ return -EINVAL;
+ }
+
+ sess->sam_sess_params.cipher_key = aead_xform->aead.key.data;
+ sess->sam_sess_params.cipher_key_len = aead_xform->aead.key.length;
+
+ if (sess->sam_sess_params.cipher_mode == SAM_CIPHER_GCM)
+ sess->sam_sess_params.auth_alg = SAM_AUTH_AES_GCM;
+
+ sess->sam_sess_params.u.basic.auth_icv_len =
+ aead_xform->aead.digest_length;
+
+ sess->sam_sess_params.u.basic.auth_aad_len =
+ aead_xform->aead.aad_length;
+
+ return 0;
+}
+
+/**
+ * Parse crypto transform chain and setup session parameters.
+ *
+ * @param dev Pointer to crypto device
+ * @param sess Poiner to crypto session
+ * @param xform Pointer to configuration structure chain for crypto operations.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+int
+mrvl_crypto_set_session_parameters(struct mrvl_crypto_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ const struct rte_crypto_sym_xform *cipher_xform = NULL;
+ const struct rte_crypto_sym_xform *auth_xform = NULL;
+ const struct rte_crypto_sym_xform *aead_xform = NULL;
+
+ /* Filter out spurious/broken requests */
+ if (xform == NULL)
+ return -EINVAL;
+
+ sess->chain_order = mrvl_crypto_get_chain_order(xform);
+ switch (sess->chain_order) {
+ case MRVL_CRYPTO_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case MRVL_CRYPTO_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
+ case MRVL_CRYPTO_CHAIN_CIPHER_ONLY:
+ cipher_xform = xform;
+ break;
+ case MRVL_CRYPTO_CHAIN_AUTH_ONLY:
+ auth_xform = xform;
+ break;
+ case MRVL_CRYPTO_CHAIN_COMBINED:
+ aead_xform = xform;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((cipher_xform != NULL) &&
+ (mrvl_crypto_set_cipher_session_parameters(
+ sess, cipher_xform) < 0)) {
+ MRVL_CRYPTO_LOG_ERR("Invalid/unsupported cipher parameters");
+ return -EINVAL;
+ }
+
+ if ((auth_xform != NULL) &&
+ (mrvl_crypto_set_auth_session_parameters(
+ sess, auth_xform) < 0)) {
+ MRVL_CRYPTO_LOG_ERR("Invalid/unsupported auth parameters");
+ return -EINVAL;
+ }
+
+ if ((aead_xform != NULL) &&
+ (mrvl_crypto_set_aead_session_parameters(
+ sess, aead_xform) < 0)) {
+ MRVL_CRYPTO_LOG_ERR("Invalid/unsupported aead parameters");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ *-----------------------------------------------------------------------------
+ * Process Operations
+ *-----------------------------------------------------------------------------
+ */
+
+/**
+ * Prepare a single request.
+ *
+ * This function basically translates DPDK crypto request into one
+ * understandable by MUDSK's SAM. If this is a first request in a session,
+ * it starts the session.
+ *
+ * @param request Pointer to pre-allocated && reset request buffer [Out].
+ * @param src_bd Pointer to pre-allocated source descriptor [Out].
+ * @param dst_bd Pointer to pre-allocated destination descriptor [Out].
+ * @param op Pointer to DPDK crypto operation struct [In].
+ */
+static inline int
+mrvl_request_prepare(struct sam_cio_op_params *request,
+ struct sam_buf_info *src_bd,
+ struct sam_buf_info *dst_bd,
+ struct rte_crypto_op *op)
+{
+ struct mrvl_crypto_session *sess;
+ struct rte_mbuf *dst_mbuf;
+ uint8_t *digest;
+
+ if (unlikely(op->sess_type == RTE_CRYPTO_OP_SESSIONLESS)) {
+ MRVL_CRYPTO_LOG_ERR("MRVL CRYPTO PMD only supports session "
+ "oriented requests, op (%p) is sessionless.",
+ op);
+ return -EINVAL;
+ }
+
+ sess = (struct mrvl_crypto_session *)get_session_private_data(
+ op->sym->session, cryptodev_driver_id);
+ if (unlikely(sess == NULL)) {
+ MRVL_CRYPTO_LOG_ERR("Session was not created for this device");
+ return -EINVAL;
+ }
+
+ /*
+ * If application delivered us null dst buffer, it means it expects
+ * us to deliver the result in src buffer.
+ */
+ dst_mbuf = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+ request->sa = sess->sam_sess;
+ request->cookie = op;
+
+ /* Single buffers only, sorry. */
+ request->num_bufs = 1;
+ request->src = src_bd;
+ src_bd->vaddr = rte_pktmbuf_mtod(op->sym->m_src, void *);
+ src_bd->paddr = rte_pktmbuf_iova(op->sym->m_src);
+ src_bd->len = rte_pktmbuf_data_len(op->sym->m_src);
+
+ /* Empty source. */
+ if (rte_pktmbuf_data_len(op->sym->m_src) == 0) {
+ /* EIP does not support 0 length buffers. */
+ MRVL_CRYPTO_LOG_ERR("Buffer length == 0 not supported!");
+ return -1;
+ }
+
+ /* Empty destination. */
+ if (rte_pktmbuf_data_len(dst_mbuf) == 0) {
+ /* Make dst buffer fit at least source data. */
+ if (rte_pktmbuf_append(dst_mbuf,
+ rte_pktmbuf_data_len(op->sym->m_src)) == NULL) {
+ MRVL_CRYPTO_LOG_ERR("Unable to set big enough dst buffer!");
+ return -1;
+ }
+ }
+
+ request->dst = dst_bd;
+ dst_bd->vaddr = rte_pktmbuf_mtod(dst_mbuf, void *);
+ dst_bd->paddr = rte_pktmbuf_iova(dst_mbuf);
+
+ /*
+ * We can use all available space in dst_mbuf,
+ * not only what's used currently.
+ */
+ dst_bd->len = dst_mbuf->buf_len - rte_pktmbuf_headroom(dst_mbuf);
+
+ if (sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED) {
+ request->cipher_len = op->sym->aead.data.length;
+ request->cipher_offset = op->sym->aead.data.offset;
+ request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
+ sess->cipher_iv_offset);
+
+ request->auth_aad = op->sym->aead.aad.data;
+ request->auth_offset = request->cipher_offset;
+ request->auth_len = request->cipher_len;
+ } else {
+ request->cipher_len = op->sym->cipher.data.length;
+ request->cipher_offset = op->sym->cipher.data.offset;
+ request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
+ sess->cipher_iv_offset);
+
+ request->auth_offset = op->sym->auth.data.offset;
+ request->auth_len = op->sym->auth.data.length;
+ }
+
+ digest = sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED ?
+ op->sym->aead.digest.data : op->sym->auth.digest.data;
+ if (digest == NULL) {
+ /* No auth - no worry. */
+ return 0;
+ }
+
+ request->auth_icv_offset = request->auth_offset + request->auth_len;
+
+ /*
+ * EIP supports only scenarios where ICV(digest buffer) is placed at
+ * auth_icv_offset. Any other placement means risking errors.
+ */
+ if (sess->sam_sess_params.dir == SAM_DIR_ENCRYPT) {
+ /*
+ * This should be the most common case anyway,
+ * EIP will overwrite DST buffer at auth_icv_offset.
+ */
+ if (rte_pktmbuf_mtod_offset(
+ dst_mbuf, uint8_t *,
+ request->auth_icv_offset) == digest) {
+ return 0;
+ }
+ } else {/* sess->sam_sess_params.dir == SAM_DIR_DECRYPT */
+ /*
+ * EIP will look for digest at auth_icv_offset
+ * offset in SRC buffer.
+ */
+ if (rte_pktmbuf_mtod_offset(
+ op->sym->m_src, uint8_t *,
+ request->auth_icv_offset) == digest) {
+ return 0;
+ }
+ }
+
+ /*
+ * If we landed here it means that digest pointer is
+ * at different than expected place.
+ */
+ return -1;
+}
+
+/*
+ *-----------------------------------------------------------------------------
+ * PMD Framework handlers
+ *-----------------------------------------------------------------------------
+ */
+
+/**
+ * Enqueue burst.
+ *
+ * @param queue_pair Pointer to queue pair.
+ * @param ops Pointer to ops requests array.
+ * @param nb_ops Number of elements in ops requests array.
+ * @returns Number of elements consumed from ops.
+ */
+static uint16_t
+mrvl_crypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ uint16_t iter_ops = 0;
+ uint16_t to_enq = 0;
+ uint16_t consumed = 0;
+ int ret;
+ struct sam_cio_op_params requests[nb_ops];
+ /*
+ * DPDK uses single fragment buffers, so we can KISS descriptors.
+ * SAM does not store bd pointers, so on-stack scope will be enough.
+ */
+ struct sam_buf_info src_bd[nb_ops];
+ struct sam_buf_info dst_bd[nb_ops];
+ struct mrvl_crypto_qp *qp = (struct mrvl_crypto_qp *)queue_pair;
+
+ if (nb_ops == 0)
+ return 0;
+
+ /* Prepare the burst. */
+ memset(&requests, 0, sizeof(requests));
+
+ /* Iterate through */
+ for (; iter_ops < nb_ops; ++iter_ops) {
+ if (mrvl_request_prepare(&requests[iter_ops],
+ &src_bd[iter_ops],
+ &dst_bd[iter_ops],
+ ops[iter_ops]) < 0) {
+ MRVL_CRYPTO_LOG_ERR(
+ "Error while parameters preparation!");
+ qp->stats.enqueue_err_count++;
+ ops[iter_ops]->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+ /*
+ * Number of handled ops is increased
+ * (even if the result of handling is error).
+ */
+ ++consumed;
+ break;
+ }
+
+ ops[iter_ops]->status =
+ RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ /* Increase the number of ops to enqueue. */
+ ++to_enq;
+ } /* for (; iter_ops < nb_ops;... */
+
+ if (to_enq > 0) {
+ /* Send the burst */
+ ret = sam_cio_enq(qp->cio, requests, &to_enq);
+ consumed += to_enq;
+ if (ret < 0) {
+ /*
+ * Trust SAM that in this case returned value will be at
+ * some point correct (now it is returned unmodified).
+ */
+ qp->stats.enqueue_err_count += to_enq;
+ for (iter_ops = 0; iter_ops < to_enq; ++iter_ops)
+ ops[iter_ops]->status =
+ RTE_CRYPTO_OP_STATUS_ERROR;
+ }
+ }
+
+ qp->stats.enqueued_count += to_enq;
+ return consumed;
+}
+
+/**
+ * Dequeue burst.
+ *
+ * @param queue_pair Pointer to queue pair.
+ * @param ops Pointer to ops requests array.
+ * @param nb_ops Number of elements in ops requests array.
+ * @returns Number of elements dequeued.
+ */
+static uint16_t
+mrvl_crypto_pmd_dequeue_burst(void *queue_pair,
+ struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ int ret;
+ struct mrvl_crypto_qp *qp = queue_pair;
+ struct sam_cio *cio = qp->cio;
+ struct sam_cio_op_result results[nb_ops];
+ uint16_t i;
+
+ ret = sam_cio_deq(cio, results, &nb_ops);
+ if (ret < 0) {
+ /* Count all dequeued as error. */
+ qp->stats.dequeue_err_count += nb_ops;
+
+ /* But act as they were dequeued anyway*/
+ qp->stats.dequeued_count += nb_ops;
+
+ return 0;
+ }
+
+ /* Unpack and check results. */
+ for (i = 0; i < nb_ops; ++i) {
+ ops[i] = results[i].cookie;
+
+ switch (results[i].status) {
+ case SAM_CIO_OK:
+ ops[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ break;
+ case SAM_CIO_ERR_ICV:
+ MRVL_CRYPTO_LOG_DBG("CIO returned SAM_CIO_ERR_ICV.");
+ ops[i]->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ break;
+ default:
+ MRVL_CRYPTO_LOG_DBG(
+ "CIO returned Error: %d", results[i].status);
+ ops[i]->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
+ }
+
+ qp->stats.dequeued_count += nb_ops;
+ return nb_ops;
+}
+
+/**
+ * Create a new crypto device.
+ *
+ * @param name Driver name.
+ * @param vdev Pointer to device structure.
+ * @param init_params Pointer to initialization parameters.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+cryptodev_mrvl_crypto_create(const char *name,
+ struct rte_vdev_device *vdev,
+ struct rte_cryptodev_pmd_init_params *init_params)
+{
+ struct rte_cryptodev *dev;
+ struct mrvl_crypto_private *internals;
+ struct sam_init_params sam_params;
+ int ret;
+
+ dev = rte_cryptodev_pmd_create(name, &vdev->device, init_params);
+ if (dev == NULL) {
+ MRVL_CRYPTO_LOG_ERR("failed to create cryptodev vdev");
+ goto init_error;
+ }
+
+ dev->driver_id = cryptodev_driver_id;
+ dev->dev_ops = rte_mrvl_crypto_pmd_ops;
+
+ /* Register rx/tx burst functions for data path. */
+ dev->enqueue_burst = mrvl_crypto_pmd_enqueue_burst;
+ dev->dequeue_burst = mrvl_crypto_pmd_dequeue_burst;
+
+ dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+ RTE_CRYPTODEV_FF_HW_ACCELERATED;
+
+ /* Set vector instructions mode supported */
+ internals = dev->data->dev_private;
+
+ internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
+ internals->max_nb_sessions = init_params->max_nb_sessions;
+
+ /*
+ * ret == -EEXIST is correct, it means DMA
+ * has been already initialized.
+ */
+ ret = mv_sys_dma_mem_init(MRVL_MUSDK_DMA_MEMSIZE);
+ if (ret < 0) {
+ if (ret != -EEXIST)
+ return ret;
+
+ MRVL_CRYPTO_LOG_INFO(
+ "DMA memory has been already initialized by a different driver.");
+ }
+
+ sam_params.max_num_sessions = internals->max_nb_sessions;
+
+ return sam_init(&sam_params);
+
+init_error:
+ MRVL_CRYPTO_LOG_ERR(
+ "driver %s: %s failed", init_params->name, __func__);
+
+ cryptodev_mrvl_crypto_uninit(vdev);
+ return -EFAULT;
+}
+
+/**
+ * Initialize the crypto device.
+ *
+ * @param vdev Pointer to device structure.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+cryptodev_mrvl_crypto_init(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev_pmd_init_params init_params = { };
+ const char *name, *args;
+ int ret;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ args = rte_vdev_device_args(vdev);
+
+ init_params.private_data_size = sizeof(struct mrvl_crypto_private);
+ init_params.max_nb_queue_pairs = sam_get_num_inst() * SAM_HW_RING_NUM;
+ init_params.max_nb_sessions =
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS;
+ init_params.socket_id = rte_socket_id();
+
+ ret = rte_cryptodev_pmd_parse_input_args(&init_params, args);
+ if (ret) {
+ RTE_LOG(ERR, PMD,
+ "Failed to parse initialisation arguments[%s]\n",
+ args);
+ return -EINVAL;
+ }
+
+ return cryptodev_mrvl_crypto_create(name, vdev, &init_params);
+}
+
+/**
+ * Uninitialize the crypto device
+ *
+ * @param vdev Pointer to device structure.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev *cryptodev;
+ const char *name = rte_vdev_device_name(vdev);
+
+ if (name == NULL)
+ return -EINVAL;
+
+ RTE_LOG(INFO, PMD,
+ "Closing Marvell crypto device %s on numa socket %u\n",
+ name, rte_socket_id());
+
+ sam_deinit();
+
+ cryptodev = rte_cryptodev_pmd_get_named_dev(name);
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ return rte_cryptodev_pmd_destroy(cryptodev);
+}
+
+/**
+ * Basic driver handlers for use in the constructor.
+ */
+static struct rte_vdev_driver cryptodev_mrvl_pmd_drv = {
+ .probe = cryptodev_mrvl_crypto_init,
+ .remove = cryptodev_mrvl_crypto_uninit
+};
+
+static struct cryptodev_driver mrvl_crypto_drv;
+
+/* Register the driver in constructor. */
+RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_MRVL_PMD, cryptodev_mrvl_pmd_drv);
+RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_MRVL_PMD,
+ "max_nb_queue_pairs=<int> "
+ "max_nb_sessions=<int> "
+ "socket_id=<int>");
+RTE_PMD_REGISTER_CRYPTO_DRIVER(mrvl_crypto_drv, cryptodev_mrvl_pmd_drv.driver,
+ cryptodev_driver_id);
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Marvell International Ltd.
+ * Copyright(c) 2017 Semihalf.
+ * All rights reserved.
+ */
+
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "rte_mrvl_pmd_private.h"
+
+/**
+ * Capabilities list to be used in reporting to DPDK.
+ */
+static const struct rte_cryptodev_capabilities
+ mrvl_crypto_pmd_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 1,
+ .max = 128,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 1,
+ .max = 128,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES GCM */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
+ {.aead = {
+ .algo = RTE_CRYPTO_AEAD_AES_GCM,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = {
+ .min = 8,
+ .max = 12,
+ .increment = 4
+ },
+ .iv_size = {
+ .min = 12,
+ .max = 16,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* AES GMAC (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_AES_GMAC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 65532,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 24,
+ .max = 24,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .block_size = 8,
+ .key_size = {
+ .min = 24,
+ .max = 24,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+
+/**
+ * Configure device (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param config Pointer to configuration structure.
+ * @returns 0. Always.
+ */
+static int
+mrvl_crypto_pmd_config(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused struct rte_cryptodev_config *config)
+{
+ return 0;
+}
+
+/**
+ * Start device (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @returns 0. Always.
+ */
+static int
+mrvl_crypto_pmd_start(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+/**
+ * Stop device (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @returns 0. Always.
+ */
+static void
+mrvl_crypto_pmd_stop(__rte_unused struct rte_cryptodev *dev)
+{
+}
+
+/**
+ * Get device statistics (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param stats Pointer to statistics structure [out].
+ */
+static void
+mrvl_crypto_pmd_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct mrvl_crypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+ stats->enqueued_count += qp->stats.enqueued_count;
+ stats->dequeued_count += qp->stats.dequeued_count;
+
+ stats->enqueue_err_count += qp->stats.enqueue_err_count;
+ stats->dequeue_err_count += qp->stats.dequeue_err_count;
+ }
+}
+
+/**
+ * Reset device statistics (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ */
+static void
+mrvl_crypto_pmd_stats_reset(struct rte_cryptodev *dev)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct mrvl_crypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+ }
+}
+
+/**
+ * Get device info (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param dev_info Pointer to the device info structure [out].
+ */
+static void
+mrvl_crypto_pmd_info_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info)
+{
+ struct mrvl_crypto_private *internals = dev->data->dev_private;
+
+ if (dev_info != NULL) {
+ dev_info->driver_id = dev->driver_id;
+ dev_info->feature_flags = dev->feature_flags;
+ dev_info->capabilities = mrvl_crypto_pmd_capabilities;
+ dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
+ dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ }
+}
+
+/**
+ * Release queue pair (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param qp_id ID of Queue Pair to release.
+ * @returns 0. Always.
+ */
+static int
+mrvl_crypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+ struct mrvl_crypto_qp *qp =
+ (struct mrvl_crypto_qp *)dev->data->queue_pairs[qp_id];
+
+ if (dev->data->queue_pairs[qp_id] != NULL) {
+ sam_cio_flush(qp->cio);
+ sam_cio_deinit(qp->cio);
+ rte_free(dev->data->queue_pairs[qp_id]);
+ dev->data->queue_pairs[qp_id] = NULL;
+ }
+
+ return 0;
+}
+
+/**
+ * Close device (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @returns 0. Always.
+ */
+static int
+mrvl_crypto_pmd_close(struct rte_cryptodev *dev)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++)
+ mrvl_crypto_pmd_qp_release(dev, qp_id);
+
+ return 0;
+}
+
+/**
+ * Setup a queue pair (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param qp_id ID of the Queue Pair.
+ * @param qp_conf Queue pair configuration (nb of descriptors).
+ * @param socket_id NUMA socket to allocate memory on.
+ * @returns 0 upon success, negative value otherwise.
+ */
+static int
+mrvl_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id, struct rte_mempool *session_pool)
+{
+ struct mrvl_crypto_qp *qp = NULL;
+ char match[RTE_CRYPTODEV_NAME_MAX_LEN];
+ unsigned int n;
+
+ /* Allocate the queue pair data structure. */
+ qp = rte_zmalloc_socket("MRVL Crypto PMD Queue Pair", sizeof(*qp),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (qp == NULL)
+ return -ENOMEM;
+
+ /* Free old qp prior setup if needed. */
+ if (dev->data->queue_pairs[qp_id] != NULL)
+ mrvl_crypto_pmd_qp_release(dev, qp_id);
+
+ do { /* Error handling block */
+
+ /*
+ * This extra check is necessary due to a bug in
+ * crypto library.
+ */
+ int num = sam_get_num_inst();
+ if (num == 0) {
+ MRVL_CRYPTO_LOG_ERR("No crypto engines detected.\n");
+ return -1;
+ }
+
+ /*
+ * In case two crypto engines are enabled qps will
+ * be evenly spread among them. Even and odd qps will
+ * be handled by cio-0 and cio-1 respectively. qp-cio mapping
+ * will look as follows:
+ *
+ * qp: 0 1 2 3
+ * cio-x:y: cio-0:0, cio-1:0, cio-0:1, cio-1:1
+ *
+ * qp: 4 5 6 7
+ * cio-x:y: cio-0:2, cio-1:2, cio-0:3, cio-1:3
+ *
+ * In case just one engine is enabled mapping will look as
+ * follows:
+ * qp: 0 1 2 3
+ * cio-x:y: cio-0:0, cio-0:1, cio-0:2, cio-0:3
+ */
+ n = snprintf(match, sizeof(match), "cio-%u:%u",
+ qp_id % num, qp_id / num);
+
+ if (n >= sizeof(match))
+ break;
+
+ qp->cio_params.match = match;
+ qp->cio_params.size = qp_conf->nb_descriptors;
+
+ if (sam_cio_init(&qp->cio_params, &qp->cio) < 0)
+ break;
+
+ qp->sess_mp = session_pool;
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+ dev->data->queue_pairs[qp_id] = qp;
+ return 0;
+ } while (0);
+
+ rte_free(qp);
+ return -1;
+}
+
+/** Start queue pair (PMD ops callback) - not supported.
+ *
+ * @param dev Pointer to the device structure.
+ * @param qp_id ID of the Queue Pair.
+ * @returns -ENOTSUP. Always.
+ */
+static int
+mrvl_crypto_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Stop queue pair (PMD ops callback) - not supported.
+ *
+ * @param dev Pointer to the device structure.
+ * @param qp_id ID of the Queue Pair.
+ * @returns -ENOTSUP. Always.
+ */
+static int
+mrvl_crypto_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Return the number of allocated queue pairs (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @returns Number of allocated queue pairs.
+ */
+static uint32_t
+mrvl_crypto_pmd_qp_count(struct rte_cryptodev *dev)
+{
+ return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the session structure (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure [Unused].
+ * @returns Size of Marvell crypto session.
+ */
+static unsigned
+mrvl_crypto_pmd_session_get_size(__rte_unused struct rte_cryptodev *dev)
+{
+ return sizeof(struct mrvl_crypto_session);
+}
+
+/** Configure the session from a crypto xform chain (PMD ops callback).
+ *
+ * @param dev Pointer to the device structure.
+ * @param xform Pointer to the crytpo configuration structure.
+ * @param sess Pointer to the empty session structure.
+ * @returns 0 upon success, negative value otherwise.
+ */
+static int
+mrvl_crypto_pmd_session_configure(__rte_unused struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ struct rte_cryptodev_sym_session *sess,
+ struct rte_mempool *mp)
+{
+ struct mrvl_crypto_session *mrvl_sess;
+ void *sess_private_data;
+ int ret;
+
+ if (sess == NULL) {
+ MRVL_CRYPTO_LOG_ERR("Invalid session struct.");
+ return -EINVAL;
+ }
+
+ if (rte_mempool_get(mp, &sess_private_data)) {
+ CDEV_LOG_ERR("Couldn't get object from session mempool.");
+ return -ENOMEM;
+ }
+
+ ret = mrvl_crypto_set_session_parameters(sess_private_data, xform);
+ if (ret != 0) {
+ MRVL_CRYPTO_LOG_ERR("Failed to configure session parameters.");
+
+ /* Return session to mempool */
+ rte_mempool_put(mp, sess_private_data);
+ return ret;
+ }
+
+ set_session_private_data(sess, dev->driver_id, sess_private_data);
+
+ mrvl_sess = (struct mrvl_crypto_session *)sess_private_data;
+ if (sam_session_create(&mrvl_sess->sam_sess_params,
+ &mrvl_sess->sam_sess) < 0) {
+ MRVL_CRYPTO_LOG_DBG("Failed to create session!");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * Clear the memory of session so it doesn't leave key material behind.
+ *
+ * @param dev Pointer to the device structure.
+ * @returns 0. Always.
+ */
+static void
+mrvl_crypto_pmd_session_clear(struct rte_cryptodev *dev,
+ struct rte_cryptodev_sym_session *sess)
+{
+
+ uint8_t index = dev->driver_id;
+ void *sess_priv = get_session_private_data(sess, index);
+
+ /* Zero out the whole structure */
+ if (sess_priv) {
+ struct mrvl_crypto_session *mrvl_sess =
+ (struct mrvl_crypto_session *)sess_priv;
+
+ if (mrvl_sess->sam_sess &&
+ sam_session_destroy(mrvl_sess->sam_sess) < 0) {
+ MRVL_CRYPTO_LOG_INFO("Error while destroying session!");
+ }
+
+ memset(sess, 0, sizeof(struct mrvl_crypto_session));
+ struct rte_mempool *sess_mp = rte_mempool_from_obj(sess_priv);
+ set_session_private_data(sess, index, NULL);
+ rte_mempool_put(sess_mp, sess_priv);
+ }
+}
+
+/**
+ * PMD handlers for crypto ops.
+ */
+static struct rte_cryptodev_ops mrvl_crypto_pmd_ops = {
+ .dev_configure = mrvl_crypto_pmd_config,
+ .dev_start = mrvl_crypto_pmd_start,
+ .dev_stop = mrvl_crypto_pmd_stop,
+ .dev_close = mrvl_crypto_pmd_close,
+
+ .dev_infos_get = mrvl_crypto_pmd_info_get,
+
+ .stats_get = mrvl_crypto_pmd_stats_get,
+ .stats_reset = mrvl_crypto_pmd_stats_reset,
+
+ .queue_pair_setup = mrvl_crypto_pmd_qp_setup,
+ .queue_pair_release = mrvl_crypto_pmd_qp_release,
+ .queue_pair_start = mrvl_crypto_pmd_qp_start,
+ .queue_pair_stop = mrvl_crypto_pmd_qp_stop,
+ .queue_pair_count = mrvl_crypto_pmd_qp_count,
+
+ .session_get_size = mrvl_crypto_pmd_session_get_size,
+ .session_configure = mrvl_crypto_pmd_session_configure,
+ .session_clear = mrvl_crypto_pmd_session_clear
+};
+
+struct rte_cryptodev_ops *rte_mrvl_crypto_pmd_ops = &mrvl_crypto_pmd_ops;
--- /dev/null
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017 Marvell International Ltd.
+ * Copyright(c) 2017 Semihalf.
+ * All rights reserved.
+ */
+
+#ifndef _RTE_MRVL_PMD_PRIVATE_H_
+#define _RTE_MRVL_PMD_PRIVATE_H_
+
+#include "rte_mrvl_compat.h"
+
+#define CRYPTODEV_NAME_MRVL_PMD crypto_mvsam
+/**< Marvell PMD device name */
+
+#define MRVL_CRYPTO_LOG_ERR(fmt, args...) \
+ RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
+ __func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG
+#define MRVL_CRYPTO_LOG_INFO(fmt, args...) \
+ RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
+ __func__, __LINE__, ## args)
+
+#define MRVL_CRYPTO_LOG_DBG(fmt, args...) \
+ RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD), \
+ __func__, __LINE__, ## args)
+
+#else
+#define MRVL_CRYPTO_LOG_INFO(fmt, args...)
+#define MRVL_CRYPTO_LOG_DBG(fmt, args...)
+#endif
+
+/**
+ * Handy bits->bytes conversion macro.
+ */
+#define BITS2BYTES(x) ((x) >> 3)
+
+/** The operation order mode enumerator. */
+enum mrvl_crypto_chain_order {
+ MRVL_CRYPTO_CHAIN_CIPHER_ONLY,
+ MRVL_CRYPTO_CHAIN_AUTH_ONLY,
+ MRVL_CRYPTO_CHAIN_CIPHER_AUTH,
+ MRVL_CRYPTO_CHAIN_AUTH_CIPHER,
+ MRVL_CRYPTO_CHAIN_COMBINED,
+ MRVL_CRYPTO_CHAIN_NOT_SUPPORTED,
+};
+
+/** Private data structure for each crypto device. */
+struct mrvl_crypto_private {
+ unsigned int max_nb_qpairs; /**< Max number of queue pairs */
+ unsigned int max_nb_sessions; /**< Max number of sessions */
+};
+
+/** MRVL crypto queue pair structure. */
+struct mrvl_crypto_qp {
+ /** SAM CIO (MUSDK Queue Pair equivalent).*/
+ struct sam_cio *cio;
+
+ /** Session Mempool. */
+ struct rte_mempool *sess_mp;
+
+ /** Queue pair statistics. */
+ struct rte_cryptodev_stats stats;
+
+ /** CIO initialization parameters.*/
+ struct sam_cio_params cio_params;
+} __rte_cache_aligned;
+
+/** MRVL crypto private session structure. */
+struct mrvl_crypto_session {
+ /** Crypto operations chain order. */
+ enum mrvl_crypto_chain_order chain_order;
+
+ /** Session initialization parameters. */
+ struct sam_session_params sam_sess_params;
+
+ /** SAM session pointer. */
+ struct sam_sa *sam_sess;
+
+ /** Cipher IV offset. */
+ uint16_t cipher_iv_offset;
+} __rte_cache_aligned;
+
+/** Set and validate MRVL crypto session parameters */
+extern int
+mrvl_crypto_set_session_parameters(struct mrvl_crypto_session *sess,
+ const struct rte_crypto_sym_xform *xform);
+
+/** device specific operations function pointer structure */
+extern struct rte_cryptodev_ops *rte_mrvl_crypto_pmd_ops;
+
+#endif /* _RTE_MRVL_PMD_PRIVATE_H_ */
--- /dev/null
+DPDK_17.11 {
+ local: *;
+};
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += -L$(LIBMUSDK_PATH)/lib -lrte_pmd_mrvl_crypto -lmusdk
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += -L$(LIBMUSDK_PATH)/lib -lrte_pmd_mvsam_crypto -lmusdk
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
'cryptodev_sw_kasumi_autotest',
'cryptodev_sw_zuc_autotest',
'cryptodev_sw_armv8_autotest',
- 'cryptodev_sw_mrvl_autotest',
+ 'cryptodev_sw_mvsam_autotest',
'cryptodev_dpaa2_sec_autotest',
'cryptodev_dpaa_sec_autotest',
'cycles_autotest',
}
}
- /* Create a MRVL device if required */
+ /* Create a MVSAM device if required */
if (gbl_driver_id == rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_MRVL_PMD))) {
-#ifndef RTE_LIBRTE_PMD_MRVL_CRYPTO
- RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO must be"
- " enabled in config file to run this testsuite.\n");
- return TEST_FAILED;
-#endif
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD))) {
nb_devs = rte_cryptodev_device_count_by_driver(
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)));
if (nb_devs < 1) {
ret = rte_vdev_init(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD),
NULL);
TEST_ASSERT(ret == 0, "Failed to create "
"instance of pmd : %s",
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
}
}
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_AUTHONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_3DES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
ts_params->session_mpool,
ts_params->valid_devs[0],
rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD)),
BLKCIPHER_3DES_CIPHERONLY_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
test_cryptodev_mrvl(void)
{
gbl_driver_id = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
if (gbl_driver_id == -1) {
- RTE_LOG(ERR, USER1, "MRVL PMD must be loaded. Check if "
- "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO is enabled "
+ RTE_LOG(ERR, USER1, "MVSAM PMD must be loaded. Check if "
+ "CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO is enabled "
"in config file to run this testsuite.\n");
return TEST_SKIPPED;
}
REGISTER_TEST_COMMAND(cryptodev_sw_kasumi_autotest, test_cryptodev_sw_kasumi);
REGISTER_TEST_COMMAND(cryptodev_sw_zuc_autotest, test_cryptodev_sw_zuc);
REGISTER_TEST_COMMAND(cryptodev_sw_armv8_autotest, test_cryptodev_armv8);
-REGISTER_TEST_COMMAND(cryptodev_sw_mrvl_autotest, test_cryptodev_mrvl);
+REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest, test_cryptodev_mrvl);
REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec);
REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
#define CRYPTODEV_NAME_DPAA_SEC_PMD crypto_dpaa_sec
#define CRYPTODEV_NAME_DPAA2_SEC_PMD crypto_dpaa2_sec
#define CRYPTODEV_NAME_SCHEDULER_PMD crypto_scheduler
-#define CRYPTODEV_NAME_MRVL_PMD crypto_mrvl
+#define CRYPTODEV_NAME_MVSAM_PMD crypto_mvsam
#define CRYPTODEV_NAME_CCP_PMD crypto_ccp
#define CRYPTODEV_NAME_VIRTIO_PMD crypto_virtio
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO
},
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
int dpaa_sec_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_DPAA_SEC_PMD));
int mrvl_pmd = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
int virtio_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_VIRTIO_PMD));
int qat_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
int mrvl_pmd = rte_cryptodev_driver_id_get(
- RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ RTE_STR(CRYPTODEV_NAME_MVSAM_PMD));
int virtio_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_VIRTIO_PMD));
else if (driver_id == dpaa_sec_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC;
else if (driver_id == mrvl_pmd)
- target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MRVL;
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MVSAM;
else if (driver_id == virtio_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO;
else
#define BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER 0x0010 /* Scheduler */
#define BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC 0x0020 /* DPAA2_SEC flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC 0x0040 /* DPAA_SEC flag */
-#define BLOCKCIPHER_TEST_TARGET_PMD_MRVL 0x0080 /* Marvell flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_MVSAM 0x0080 /* Marvell flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_CCP 0x0040 /* CCP flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_VIRTIO 0x0200 /* VIRTIO flag */
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "DES-CBC Decryption",
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
};
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP
},
{
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "MD5 Digest Verify",
.test_data = &md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-MD5 Digest",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-MD5 Digest Verify",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA1 Digest",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA1 Digest Verify",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest Scatter Gather",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA1 Digest Verify Scatter Gather",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA224 Digest Verify",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA224 Digest",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA256 Digest Verify",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA256 Digest",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA256 Digest Verify",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA384 Digest",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA384 Digest Verify",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA384 Digest",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA384 Digest Verify",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA512 Digest",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "SHA512 Digest Verify",
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA512 Digest",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "HMAC-SHA512 Digest Verify",
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_MRVL
+ BLOCKCIPHER_TEST_TARGET_PMD_MVSAM
},
{
.test_descr = "CMAC Digest 12B",
git.droids-corp.org / dpdk.git / commitdiff