uint64_t rx_mcast_pkts;
uint64_t rx_bcast_pkts;
uint64_t rx_drop_pkts;
- uint64_t rx_err_pkts;
+ uint64_t rx_discard_pkts;
uint64_t rx_ucast_bytes;
uint64_t rx_mcast_bytes;
uint64_t rx_bcast_bytes;
uint64_t tx_mcast_pkts;
uint64_t tx_bcast_pkts;
uint64_t tx_drop_pkts;
- uint64_t tx_err_pkts;
+ uint64_t tx_discard_pkts;
uint64_t tx_ucast_bytes;
uint64_t tx_mcast_bytes;
uint64_t tx_bcast_bytes;
uint64_t tpa_bytes;
uint64_t tpa_events;
uint64_t tpa_aborts;
-} ctx_hw_stats64_t;
+} __attribute__((packed));
-/* HW Resource Manager Specification 1.2.0 */
+/* HW Resource Manager Specification 1.5.1 */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 2
-#define HWRM_VERSION_UPDATE 0
+#define HWRM_VERSION_MINOR 5
+#define HWRM_VERSION_UPDATE 1
+
+#define HWRM_VERSION_STR "1.5.1"
/*
* Following is the signature for HWRM message field that indicates not
/* Output (80 bytes) */
struct hwrm_func_qcaps_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
+ /* This field returns the type of original request. */
uint16_t seq_id;
-
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
-
/*
- * FID value. This value is used to identify operations on the PCI bus
- * as belonging to a particular PCI function.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
uint16_t fid;
-
/*
- * Port ID of port that this function is associated with. Valid only for
- * the PF. 0xFF... (All Fs) if this function is not associated with any
- * port. 0xFF... (All Fs) if this function is called from a VF.
+ * FID value. This value is used to identify operations on the
+ * PCI bus as belonging to a particular PCI function.
*/
uint16_t port_id;
-
+ /*
+ * Port ID of port that this function is associated with. Valid
+ * only for the PF. 0xFF... (All Fs) if this function is not
+ * associated with any port. 0xFF... (All Fs) if this function
+ * is called from a VF.
+ */
+ uint32_t flags;
/* If 1, then Push mode is supported on this function. */
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
/*
- * If 1, then the global MSI-X auto-masking is enabled for the device.
+ * If 1, then the global MSI-X auto-masking is enabled for the
+ * device.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
- UINT32_C(0x2)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING UINT32_C(0x2)
/*
- * If 1, then the Precision Time Protocol (PTP) processing is supported
- * on this function. The HWRM should enable PTP on only a single
- * Physical Function (PF) per port.
+ * If 1, then the Precision Time Protocol (PTP) processing is
+ * supported on this function. The HWRM should enable PTP on
+ * only a single Physical Function (PF) per port.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
- uint32_t flags;
-
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
/*
- * This value is current MAC address configured for this function. A
- * value of 00-00-00-00-00-00 indicates no MAC address is currently
- * configured.
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1 is
+ * supported on this function.
*/
- uint8_t perm_mac_address[6];
-
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
/*
- * The maximum number of RSS/COS contexts that can be allocated to the
- * function.
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2 is
+ * supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
+ /*
+ * If 1, then control and configuration of WoL magic packet are
+ * supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED UINT32_C(0x20)
+ /*
+ * If 1, then control and configuration of bitmap pattern packet
+ * are supported on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
+ /*
+ * If set to 1, then the control and configuration of rate limit
+ * of an allocated TX ring on the queried function is supported.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
+ /*
+ * If 1, then control and configuration of minimum and maximum
+ * bandwidths are supported on the queried function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
+ /*
+ * If the query is for a VF, then this flag shall be ignored. If
+ * this query is for a PF and this flag is set to 1, then the PF
+ * has the capability to set the rate limits on the TX rings of
+ * its children VFs. If this query is for a PF and this flag is
+ * set to 0, then the PF does not have the capability to set the
+ * rate limits on the TX rings of its children VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED UINT32_C(0x200)
+ /*
+ * If the query is for a VF, then this flag shall be ignored. If
+ * this query is for a PF and this flag is set to 1, then the PF
+ * has the capability to set the minimum and/or maximum
+ * bandwidths for its children VFs. If this query is for a PF
+ * and this flag is set to 0, then the PF does not have the
+ * capability to set the minimum or maximum bandwidths for its
+ * children VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
+ uint8_t mac_address[6];
+ /*
+ * This value is current MAC address configured for this
+ * function. A value of 00-00-00-00-00-00 indicates no MAC
+ * address is currently configured.
*/
uint16_t max_rsscos_ctx;
-
/*
- * The maximum number of completion rings that can be allocated to the
- * function.
+ * The maximum number of RSS/COS contexts that can be allocated
+ * to the function.
*/
uint16_t max_cmpl_rings;
-
/*
- * The maximum number of transmit rings that can be allocated to the
- * function.
+ * The maximum number of completion rings that can be allocated
+ * to the function.
*/
uint16_t max_tx_rings;
-
/*
- * The maximum number of receive rings that can be allocated to the
- * function.
+ * The maximum number of transmit rings that can be allocated to
+ * the function.
*/
uint16_t max_rx_rings;
-
/*
- * The maximum number of L2 contexts that can be allocated to the
- * function.
+ * The maximum number of receive rings that can be allocated to
+ * the function.
*/
uint16_t max_l2_ctxs;
-
- /* The maximum number of VNICs that can be allocated to the function. */
+ /*
+ * The maximum number of L2 contexts that can be allocated to
+ * the function.
+ */
uint16_t max_vnics;
-
/*
- * The identifier for the first VF enabled on a PF. This is valid only
- * on the PF with SR-IOV enabled. 0xFF... (All Fs) if this command is
- * called on a PF with SR-IOV disabled or on a VF.
+ * The maximum number of VNICs that can be allocated to the
+ * function.
*/
uint16_t first_vf_id;
-
/*
- * The maximum number of VFs that can be allocated to the function. This
- * is valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if this
- * command is called on a PF with SR-IOV disabled or on a VF.
+ * The identifier for the first VF enabled on a PF. This is
+ * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
+ * this command is called on a PF with SR-IOV disabled or on a
+ * VF.
*/
uint16_t max_vfs;
-
/*
- * The maximum number of statistic contexts that can be allocated to the
- * function.
+ * The maximum number of VFs that can be allocated to the
+ * function. This is valid only on the PF with SR-IOV enabled.
+ * 0xFF... (All Fs) if this command is called on a PF with SR-
+ * IOV disabled or on a VF.
*/
uint16_t max_stat_ctx;
-
/*
- * The maximum number of Encapsulation records that can be offloaded by
- * this function.
+ * The maximum number of statistic contexts that can be
+ * allocated to the function.
*/
uint32_t max_encap_records;
-
/*
- * The maximum number of decapsulation records that can be offloaded by
- * this function.
+ * The maximum number of Encapsulation records that can be
+ * offloaded by this function.
*/
uint32_t max_decap_records;
-
/*
- * The maximum number of Exact Match (EM) flows that can be offloaded by
- * this function on the TX side.
+ * The maximum number of decapsulation records that can be
+ * offloaded by this function.
*/
uint32_t max_tx_em_flows;
-
/*
- * The maximum number of Wildcard Match (WM) flows that can be offloaded
- * by this function on the TX side.
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the TX side.
*/
uint32_t max_tx_wm_flows;
-
/*
- * The maximum number of Exact Match (EM) flows that can be offloaded by
- * this function on the RX side.
+ * The maximum number of Wildcard Match (WM) flows that can be
+ * offloaded by this function on the TX side.
*/
uint32_t max_rx_em_flows;
-
/*
- * The maximum number of Wildcard Match (WM) flows that can be offloaded
- * by this function on the RX side.
+ * The maximum number of Exact Match (EM) flows that can be
+ * offloaded by this function on the RX side.
*/
uint32_t max_rx_wm_flows;
-
/*
- * The maximum number of multicast filters that can be supported by this
- * function on the RX side.
+ * The maximum number of Wildcard Match (WM) flows that can be
+ * offloaded by this function on the RX side.
*/
uint32_t max_mcast_filters;
-
/*
- * The maximum value of flow_id that can be supported in completion
- * records.
+ * The maximum number of multicast filters that can be supported
+ * by this function on the RX side.
*/
uint32_t max_flow_id;
-
/*
- * The maximum number of HW ring groups that can be supported on this
- * function.
+ * The maximum value of flow_id that can be supported in
+ * completion records.
*/
uint32_t max_hw_ring_grps;
-
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
-
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * The maximum number of HW ring groups that can be supported on
+ * this function.
*/
+ uint16_t max_sp_tx_rings;
+ /*
+ * The maximum number of strict priority transmit rings that can
+ * be allocated to the function. This number indicates the
+ * maximum number of TX rings that can be assigned strict
+ * priorities out of the maximum number of TX rings that can be
+ * allocated (max_tx_rings) to the function.
+ */
+ uint8_t unused_0;
uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
} __attribute__((packed));
/* hwrm_func_reset */
git.droids-corp.org / dpdk.git / commitdiff