net/mlx5: adjust maximum LRO message size

LRO message is contained in the MPRQ strides.
While the LRO message size cannot be bigger than 65280 according to the
PRM, the strides which contain it may be bigger than the maximum buffer
size allowed in dpdk mbuf - 0xFFFF.

Adjust the maximum LRO message size to avoid buffer length overflow.

Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index b98c406..6cb8858 100644 (file)
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -625,6 +625,7 @@ struct mlx5_priv {
        struct ibv_flow_action *verbs_action;
        /**< Verbs modify header action object. */
        uint8_t ft_type; /**< Flow table type, Rx or Tx. */
+       uint8_t max_lro_msg_size;
        /* Tags resources cache. */
        uint32_t link_speed_capa; /* Link speed capabilities. */
        struct mlx5_xstats_ctrl xstats_ctrl; /* Extended stats control. */

diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index edfcdd1..b225055 100644 (file)
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1540,6 +1540,39 @@ exit:
        return 0;
 }
 
+/**
+ * Adjust the maximum LRO massage size.
+ * LRO massage is contained in the MPRQ strides.
+ * While the LRO massage size cannot be bigger than 65280 according to the
+ * PRM, the strides which contain it may be bigger.
+ * Adjust the maximum LRO massage size to avoid the above option.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ * @param strd_n
+ *   Number of strides per WQE..
+ * @param strd_sz
+ *   The stride size.
+ */
+static void
+mlx5_max_lro_msg_size_adjust(struct rte_eth_dev *dev, uint32_t strd_n,
+                            uint32_t strd_sz)
+{
+       struct mlx5_priv *priv = dev->data->dev_private;
+       uint32_t max_buf_len = strd_sz * strd_n;
+
+       if (max_buf_len > (uint64_t)UINT16_MAX)
+               max_buf_len = RTE_ALIGN_FLOOR((uint32_t)UINT16_MAX, strd_sz);
+       max_buf_len /= 256;
+       max_buf_len = RTE_MIN(max_buf_len, (uint32_t)UINT8_MAX);
+       assert(max_buf_len);
+       if (priv->max_lro_msg_size)
+               priv->max_lro_msg_size =
+                       RTE_MIN((uint32_t)priv->max_lro_msg_size, max_buf_len);
+       else
+               priv->max_lro_msg_size = max_buf_len;
+}
+
 /**
  * Create a DPDK Rx queue.
  *
@@ -1623,6 +1656,8 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
                tmpl->rxq.strd_headroom_en = strd_headroom_en;
                tmpl->rxq.mprq_max_memcpy_len = RTE_MIN(mb_len -
                            RTE_PKTMBUF_HEADROOM, config->mprq.max_memcpy_len);
+               mlx5_max_lro_msg_size_adjust(dev, (1 << tmpl->rxq.strd_num_n),
+                                            (1 << tmpl->rxq.strd_sz_n));
                DRV_LOG(DEBUG,
                        "port %u Rx queue %u: Multi-Packet RQ is enabled"
                        " strd_num_n = %u, strd_sz_n = %u",
@@ -2165,7 +2200,7 @@ mlx5_hrxq_new(struct rte_eth_dev *dev,
                if (lro) {
                        tir_attr.lro_timeout_period_usecs =
                                        priv->config.lro.timeout;
-                       tir_attr.lro_max_msg_sz = 0xff;
+                       tir_attr.lro_max_msg_sz = priv->max_lro_msg_size;
                        tir_attr.lro_enable_mask = lro;
                }
                tir = mlx5_devx_cmd_create_tir(priv->sh->ctx, &tir_attr);