doc: fix naming of Mellanox devices

The devices of the family ConnectX may have two letters as suffix.
Such suffix is preceded with a space and the second x is lowercase:
    - ConnectX-4 Lx
    - ConnectX-5 Ex
    - ConnectX-6 Dx

Uppercase of the device family name BlueField is also fixed.

The lists of supported devices are fixed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

diff --git a/config/common_base b/config/common_base
index 6ea9c63..7ca2f28 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -361,13 +361,13 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 
 #
 # Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
-# ConnectX-6 & Bluefield (MLX5) PMD
+# ConnectX-6 & BlueField (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
 
 #
-# Compile vdpa-oriented Mellanox ConnectX-6 & Bluefield (MLX5) PMD
+# Compile vdpa-oriented Mellanox ConnectX-6 & BlueField (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=n
 

diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index 4b1d1ac..1f1e2f6 100644 (file)
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -298,11 +298,6 @@ Installing Mellanox OFED
 
 5. Continue with :ref:`section 2 of the Quick Start Guide <QSG_2>`.
 
-Supported NICs
---------------
-
-* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
-
 .. _qsg:
 
 Quick Start Guide

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 006d075..4a96979 100644 (file)
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -2,12 +2,14 @@
     Copyright 2015 6WIND S.A.
     Copyright 2015 Mellanox Technologies, Ltd
 
+.. include:: <isonum.txt>
+
 MLX5 poll mode driver
 =====================
 
 The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
 for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6DX** and
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6 Dx** and
 **Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
 as well as their virtual functions (VF) in SR-IOV context.
 
@@ -336,9 +338,9 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+  - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
     and BlueField.
-  - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+  - POWER9 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
     and BlueField.
 
 - ``rxq_cqe_pad_en`` parameter [int]
@@ -369,9 +371,9 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+  - x86_64 with ConnectX-4, ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
     and BlueField.
-  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+  - POWER8 and ARMv8 with ConnectX-4 Lx, ConnectX-5, ConnectX-6, ConnectX-6 Dx
     and BlueField.
 
 - ``mprq_en`` parameter [int]
@@ -474,14 +476,14 @@ Run-time configuration
   If ``txq_inline_min`` key is not present, the value may be queried by the
   driver from the NIC via DevX if this feature is available. If there is no DevX
   enabled/supported the value 18 (supposing L2 header including VLAN) is set
-  for ConnectX-4 and ConnectX-4LX, and 0 is set by default for ConnectX-5
+  for ConnectX-4 and ConnectX-4 Lx, and 0 is set by default for ConnectX-5
   and newer NICs. If packet is shorter the ``txq_inline_min`` value, the entire
   packet is inlined.
 
   For ConnectX-4 NIC, driver does not allow specifying value below 18
   (minimal L2 header, including VLAN), error will be raised.
 
-  For ConnectX-4LX NIC, it is allowed to specify values below 18, but
+  For ConnectX-4 Lx NIC, it is allowed to specify values below 18, but
   it is not recommended and may prevent NIC from sending packets over
   some configurations.
 
@@ -564,7 +566,7 @@ Run-time configuration
 - ``txq_mpw_en`` parameter [int]
 
   A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
-  ConnectX-6, ConnectX-6 DX and BlueField. eMPW allows the TX burst function to pack
+  ConnectX-6, ConnectX-6 Dx and BlueField. eMPW allows the TX burst function to pack
   up multiple packets in a single descriptor session in order to save PCI bandwidth
   and improve performance at the cost of a slightly higher CPU usage. When
   ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
@@ -611,7 +613,7 @@ Run-time configuration
 
 - ``tx_vec_en`` parameter [int]
 
-  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 DX
+  A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 Dx
   and BlueField NICs if the number of global Tx queues on the port is less than
   ``txqs_max_vec``. The parameter is deprecated and ignored.
 
@@ -912,7 +914,7 @@ Mellanox OFED/EN
   - ConnectX-5: **16.21.1000** and above.
   - ConnectX-5 Ex: **16.21.1000** and above.
   - ConnectX-6: **20.99.5374** and above.
-  - ConnectX-6 DX: **22.27.0090** and above.
+  - ConnectX-6 Dx: **22.27.0090** and above.
   - BlueField: **18.25.1010** and above.
 
 While these libraries and kernel modules are available on OpenFabrics
@@ -937,28 +939,43 @@ required from that distribution.
 Supported NICs
 --------------
 
-* Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
-* Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
-* Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
-* Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
-* Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT (1x40G)
-* Mellanox(R) ConnectX(R)-4 40G MCX413A-BCAT (1x40G)
-* Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
-* Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT (1x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX413A-GCAT (1x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT (2x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX416A-BCAT (2x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX416A-GCAT (2x50G)
-* Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
-* Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
-* Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
-* Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
-* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
-* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
-* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
-* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100g)
-* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200g)
+The following Mellanox device families are supported by the same mlx5 driver:
+
+  - ConnectX-4
+  - ConnectX-4 Lx
+  - ConnectX-5
+  - ConnectX-5 Ex
+  - ConnectX-6
+  - ConnectX-6 Dx
+  - BlueField
+
+Below are detailed device names:
+
+* Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX4111A-XCAT (1x10G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 10G MCX412A-XCAT (2x10G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX4111A-ACAT (1x25G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 25G MCX412A-ACAT (2x25G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX413A-BCAT (1x40G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX4131A-BCAT (1x40G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 40G MCX415A-BCAT (1x40G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX413A-GCAT (1x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX4131A-GCAT (1x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX414A-BCAT (2x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-GCAT (1x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX416A-BCAT (2x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX416A-GCAT (2x50G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 50G MCX415A-CCAT (1x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 100G MCX416A-CCAT (2x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 Lx 10G MCX4111A-XCAT (1x10G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 Lx 10G MCX4121A-XCAT (2x10G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4111A-ACAT (1x25G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4121A-ACAT (2x25G)
+* Mellanox\ |reg| ConnectX\ |reg|-4 Lx 40G MCX4131A-BCAT (1x40G)
+* Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-5 Ex EN 100G MCX516A-CDAT (2x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 200G MCX654106A-HCAT (2x200G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 200G MCX623105AN-VDAT (1x200G)
 
 Quick Start Guide on OFED/EN
 ----------------------------

diff --git a/doc/guides/rel_notes/release_18_08.rst b/doc/guides/rel_notes/release_18_08.rst
index 8a09dee..4ae388c 100644 (file)
--- a/doc/guides/rel_notes/release_18_08.rst
+++ b/doc/guides/rel_notes/release_18_08.rst
@@ -546,4 +546,4 @@ Tested Platforms
      * Mellanox MLNX_OFED 4.2-1.4.21.0
 
   * DPDK application running on ARM cores inside SmartNIC
-  * Bluefield representors support planned for next release.
+  * BlueField representors support planned for next release.

diff --git a/doc/guides/rel_notes/release_19_02.rst b/doc/guides/rel_notes/release_19_02.rst
index ace1534..87dfbf5 100644 (file)
--- a/doc/guides/rel_notes/release_19_02.rst
+++ b/doc/guides/rel_notes/release_19_02.rst
@@ -109,7 +109,7 @@ New Features
     ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` for make and ``ibverbs_link`` for meson.
   * Added static linkage of ``mlx`` dependency.
   * Improved stability of E-Switch flow driver.
-  * Added new make build configuration to set the cacheline size for Bluefield
+  * Added new make build configuration to set the cacheline size for BlueField
     correctly - ``arm64-bluefield-linux-gcc``.
 
 * **Updated the enic driver.**

diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 84aa03a..f0aee29 100644 (file)
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -206,7 +206,7 @@ New Features
   * Added support for VLAN set VID offload command.
   * Added support for matching on packets withe Geneve tunnel header.
   * Added hairpin support.
-  * Added ConnectX6-DX support.
+  * Added ConnectX-6 Dx support.
   * Flow engine selected based on RDMA Core library version.
     DV flow engine selected if version is rdma-core-24.0 or higher.
     Verbs flow engine selected otherwise.

diff --git a/doc/guides/vdpadevs/mlx5.rst b/doc/guides/vdpadevs/mlx5.rst
index 1660192..dd377af 100644 (file)
--- a/doc/guides/vdpadevs/mlx5.rst
+++ b/doc/guides/vdpadevs/mlx5.rst
@@ -1,12 +1,14 @@
 ..  SPDX-License-Identifier: BSD-3-Clause
     Copyright 2019 Mellanox Technologies, Ltd
 
+.. include:: <isonum.txt>
+
 MLX5 vDPA driver
 ================
 
 The MLX5 vDPA (vhost data path acceleration) driver library
 (**librte_pmd_mlx5_vdpa**) provides support for **Mellanox ConnectX-6**,
-**Mellanox ConnectX-6DX** and **Mellanox BlueField** families of
+**Mellanox ConnectX-6 Dx** and **Mellanox BlueField** families of
 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF) in
 SR-IOV context.
 
@@ -48,10 +50,10 @@ By default, the mlx5 device will be probed by the net/mlx5 driver.
 Supported NICs
 --------------
 
-* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
-* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100G)
-* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200G)
-* Mellanox(R) BlueField SmartNIC 25G MBF1M332A-ASCAT (2*25G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 200G MCX654106A-HCAT (2x200G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 200G MCX623105AN-VDAT (1x200G)
+* Mellanox\ |reg| BlueField SmartNIC 25G MBF1M332A-ASCAT (2x25G)
 
 Prerequisites
 -------------

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 4803760..94aaa60 100644 (file)
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1724,7 +1724,7 @@ out:
  *   key is specified in devargs
  * - if DevX is enabled the inline mode is queried from the
  *   device (HCA attributes and NIC vport context if needed).
- * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
+ * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
  *   and none (0 bytes) for other NICs
  *
  * @param spawn

diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index 2b4fc2a..5ac63da 100644 (file)
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -5213,7 +5213,7 @@ MLX5_TXOFF_DECL(iv,
 
 /*
  * Generate routines with Legacy Multi-Packet Write support.
- * This mode is supported by ConnectX-4LX only and imposes
+ * This mode is supported by ConnectX-4 Lx only and imposes
  * offload limitations, not supported:
  *   - ACL/Flows (metadata are becoming meaningless)
  *   - WQE Inline headers

diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index 2ad849a..57bc116 100644 (file)
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -983,7 +983,7 @@ txq_set_params(struct mlx5_txq_ctrl *txq_ctrl)
         * If there is requested minimal amount of data to inline
         * we MUST enable inlining. This is a case for ConnectX-4
         * which usually requires L2 inlined for correct operating
-        * and ConnectX-4LX which requires L2-L4 inlined to
+        * and ConnectX-4 Lx which requires L2-L4 inlined to
         * support E-Switch Flows.
         */
        if (inlen_mode) {