Update edge router usecase config files to use bulk commands.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
; BSD LICENSE
;
-; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; network) contains the following functional blocks: Packet RX & Routing,
; Traffic management and Packet TX. The input packets are assumed to be
; IPv4, while the output packets are Q-in-Q IPv4.
-
+;
; A simple implementation for this functional pipeline is presented below.
-
+;
; Packet Rx & Traffic Management Packet Tx
; Routing (Pass-Through) (Pass-Through)
; _____________________ SWQ0 ______________________ SWQ4 _____________________
; | | SWQ3 | | SWQ7 | |
; RXQ3.0 --->| |----->| |----->| |---> TXQ3.0
; |_____________________| |______________________| |_____________________|
-; | _|_ ^ _|_ ^ _|_ ^ _|_ ^
-; | |___|||___|||___|||___||
-; +--> SINK0 |___|||___|||___|||___||
-; (route miss) |__| |__| |__| |__|
-; TM0 TM1 TM2 TM3
+; | | ^ | ^ | ^ | ^
+; | |__| |__| |__| |__|
+; +--> SINK0 TM0 TM1 TM2 TM3
+; (Default)
+;
+; Input packet: Ethernet/IPv4
+; Output packet: Ethernet/QinQ/IPv4
+;
+; Packet buffer layout:
+; # Field Name Offset (Bytes) Size (Bytes)
+; 0 Mbuf 0 128
+; 1 Headroom 128 128
+; 2 Ethernet header 256 14
+; 3 IPv4 header 270 20
+
+[EAL]
+log_level = 0
[PIPELINE0]
type = MASTER
pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
encap = ethernet_qinq
qinq_sched = test
-ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+ip_hdr_offset = 270
[PIPELINE2]
type = PASS-THROUGH
+#
+# run ./config/edge_router_downstream.sh
+#
+
################################################################################
# Routing: Ether QinQ, ARP off
################################################################################
p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
-
-p 1 route ls
+#p 1 route ls
; BSD LICENSE
;
-; Copyright(c) 2015 Intel Corporation. All rights reserved.
+; Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
; An edge router typically sits between two networks such as the provider
; core network and the provider access network. A typical packet processing
; pipeline for the upstream traffic (i.e. traffic from access to core
; Flow classification, Metering, Routing and Packet TX. The input packets
; are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
; (with variable number of labels per route).
-
+;
; A simple implementation for this functional pipeline is presented below.
-
-; Packet Rx & Pass-Through Flow-Classification Flow-Actions Routing
+;
+; Packet RX & Pass-Through Flow Classification Flow Actions Routing
: Firewall
; __________ SWQ0 __________ SWQ4 __________ SWQ8 __________ SWQ12 __________
; RXQ0.0 --->| |------>| |------>| |------>| |------>| |------> TXQ0.0
; RXQ3.0 --->| |------>| |------>| |------>| |------>| |------> TXQ3.0
; |__________| |__________| |__________| |__________| |__________|
; | | |
-; +--> SINK0 (Default) +--> SINK1 (Default) +--> SINK2 (Route Miss)
+; +--> SINK0 (Default) +--> SINK1 (Default) +--> SINK2 (Default)
+;
+; Input packet: Ethernet/QinQ/IPv4
+; Output packet: Ethernet/MPLS/IPv4
+;
+; Packet buffer layout:
+; # Field Name Offset (Bytes) Size (Bytes)
+; 0 Mbuf 0 128
+; 1 Headroom 128 128
+; 2 Ethernet header 256 14
+; 3 QinQ header 270 8
+; 4 IPv4 header 278 20
+[EAL]
+log_level = 0
[PIPELINE0]
type = MASTER
pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
dma_size = 8
-dma_dst_offset = 128; mbuf (128)
-dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_dst_offset = 128
+dma_src_offset = 268; 1st Ethertype offset
dma_src_mask = 00000FFF00000FFF; qinq
-dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+dma_hash_offset = 136; dma_dst_offset + dma_size
[PIPELINE3]
type = FLOW_CLASSIFICATION
key_size = 8; dma_size
key_offset = 128; dma_dst_offset
hash_offset = 136; dma_hash_offset
-flowid_offset = 192; mbuf (128) + 64
+flowid_offset = 192
[PIPELINE4]
type = FLOW_ACTIONS
n_flows = 65536
n_meters_per_flow = 1
flow_id_offset = 192; flowid_offset
-ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+ip_hdr_offset = 278
color_offset = 196; flowid_offset + sizeof(flow_id)
[PIPELINE5]
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
encap = ethernet_mpls
mpls_color_mark = yes
-ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+ip_hdr_offset = 278
color_offset = 196; flowid_offset + sizeof(flow_id)
-################################################
-# Firewall Rules:4 for 4 ports
-################################################
-p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
-p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
-p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
-p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
-p 1 firewall add default 4 #SINK0
+#
+# run ./config/edge_router_upstream.sh
+#
+################################################################################
+# Firewall
+################################################################################
+p 1 firewall add default 4 #SINK0
+p 1 firewall add bulk ./config/edge_router_upstream_firewall.txt
+#p 1 firewall ls
################################################################################
-# Flow classification
+# Flow Classification
################################################################################
p 3 flow add default 4 #SINK1
-p 3 flow add qinq all 65536 4
+p 3 flow add qinq bulk ./config/edge_router_upstream_flow.txt
+#p 3 flow ls
################################################################################
-# Flow Actions - Metering
+# Flow Actions - Metering and Policing
################################################################################
-p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
-p 4 flows 65536 ports 4
+p 4 action flow bulk ./config/edge_router_upstream_action.txt
+#p 4 action flow ls
################################################################################
# Routing: Ether MPLS, ARP off
p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
-
-################################################################################
-# List all configurations
-################################################################################
-p 1 firewall ls
-#p 3 flow ls
-#p 4 flow actions ls
-p 5 route ls
+#p 5 route ls
git.droids-corp.org / dpdk.git / commitdiff