net/ixgbe/base: remove unused EEE code
[dpdk.git] / drivers / net / ixgbe / base / ixgbe_x550.c
2017-01-17 Wei Dainet/ixgbe/base: remove unused EEE code
2017-01-17 Wei Dainet/ixgbe/base: add EEE support for some PHYs
2017-01-17 Wei Dainet/ixgbe/base: update FW PHY flow control
2017-01-17 Wei Dainet/ixgbe/base: add physical layer options for FW PHY...
2017-01-17 Wei Dainet/ixgbe/base: support busy SGMII register reads
2017-01-17 Wei Dainet/ixgbe/base: use FW commands to control some PHYs
2017-01-17 Wei Dainet/ixgbe/base: support FW commands to control some...
2017-01-17 Wei Dainet/ixgbe/base: cleanup dead EEE code
2017-01-17 Wei Dainet/ixgbe/base: fix SGMII link setup for M88 PHYs
2017-01-17 Wei Dainet/ixgbe/base: fix getting PHY type for some x550...
2017-01-17 Wei Dainet/ixgbe/base: limit iXFI setup to X552 devices
2017-01-17 Wei Dainet/ixgbe/base: enable LASI only for X552 devices
2017-01-17 Wei Dainet/ixgbe/base: add driver version to firmware
2017-01-17 Wei Dainet/ixgbe/base: clean up X557 link status check
2017-01-17 Wei Dainet/ixgbe/base: fix PHY identification for x550a
2017-01-17 Wei Dainet/ixgbe/base: use fast MDIO for non-10G devices
2016-11-10 Wei Zhaonet/ixgbe: fix link up with X552
2016-09-30 Xiao Wangnet/ixgbe/base: clean up
2016-09-30 Xiao Wangnet/ixgbe/base: remove unneeded flow control code
2016-09-30 Xiao Wangnet/ixgbe/base: update X550em_a backplane speed
2016-09-30 Xiao Wangnet/ixgbe/base: fix possible corruption of shadow RAM
2016-09-30 Xiao Wangnet/ixgbe/base: add X550em_a FW ALEF support
2016-09-30 Xiao Wangnet/ixgbe/base: separate PHY ops init from PHY init
2016-09-30 Xiao Wangnet/ixgbe/base: reduce delay for SWFW semaphore
2016-09-30 Xiao Wangnet/ixgbe/base: set default autoneg speed at reset
2016-09-30 Xiao Wangnet/ixgbe/base: use default check link for X550em_a
2016-09-30 Xiao Wangnet/ixgbe/base: support X550em_a SGMII FC autoneg
2016-09-30 Xiao Wangnet/ixgbe/base: access IOSF by host interface
2016-09-30 Xiao Wangnet/ixgbe/base: fix function comments about X550
2016-09-30 Xiao Wangnet/ixgbe/base: configure DMA coalescing for 10Mb
2016-09-30 Xiao Wangnet/ixgbe/base: clear page register in error path
2016-09-30 Xiao Wangnet/ixgbe/base: add flow control autoneg for X550em_a...
2016-09-30 Xiao Wangnet/ixgbe/base: add flow control for X550em_a fiber
2016-09-30 Xiao Wangnet/ixgbe/base: rework X550em_a 1G PHY init
2016-09-30 Xiao Wangnet/ixgbe/base: move X550 MAC ops init into functions
2016-09-30 Xiao Wangnet/ixgbe/base: support X550em_a 10G PHY
2016-09-30 Xiao Wangnet/ixgbe/base: change endianness of PHY data
2016-09-30 Xiao Wangnet/ixgbe/base: remove X550em SFP iXFI setup
2016-06-27 Beilei Xingnet/ixgbe/base: add flow control autoneg for X550a
2016-06-27 Beilei Xingnet/ixgbe/base: fix endianness
2016-06-27 Beilei Xingnet/ixgbe/base: unify coding style
2016-06-27 Beilei Xingnet/ixgbe/base: limit PHY token lock to MDIO access
2016-06-27 Beilei Xingnet/ixgbe/base: update device IDs
2016-06-27 Beilei Xingnet/ixgbe/base: support new PHY types
2016-06-27 Beilei Xingnet/ixgbe/base: refactor internal PHY mode determination
2016-06-27 Beilei Xingnet/ixgbe/base: fix error path to release lock
2016-06-27 Beilei Xingnet/ixgbe/base: add link MAC setup for X550a SFP+
2016-06-27 Beilei Xingnet/ixgbe/base: allow per-device-type method calls
2016-06-27 Beilei Xingnet/ixgbe/base: add KR support for X550em_a devices
2016-06-27 Beilei Xingnet/ixgbe/base: refactor EEE setup for X550
2016-06-27 Beilei Xingnet/ixgbe/base: fix firmware command checksum error
2016-06-27 Beilei Xingnet/ixgbe/base: add MAC link setup for X550a SFP
2016-06-27 Beilei Xingnet/ixgbe/base: add SGMII link for X550
2016-03-16 Wenzhuo Luixgbe/base: abstract out link read/write
2016-03-16 Wenzhuo Luixgbe/base: set MDIO speed after MAC reset
2016-03-16 Wenzhuo Luixgbe/base: add sw-firmware sync for resource sharing...
2016-03-16 Wenzhuo Luixgbe/base: support X550em_x V2 device
2016-03-16 Wenzhuo Luixgbe/base: support X550em_a device
2016-01-14 Wenzhuo Luixgbe/base: add X550T1 device
2016-01-14 Wenzhuo Luixgbe/base: support new thermal alarm
2016-01-14 Wenzhuo Luixgbe/base: add new X550 iXFI configuration function
2016-01-14 Wenzhuo Luixgbe/base: move X550 MDIO clock speed init
2016-01-14 Wenzhuo Luixgbe/base: prevent X550 KR PHY reset in init
2016-01-14 Wenzhuo Luixgbe/base: support KR mode for X550 link
2016-01-14 Wenzhuo Luixgbe/base: remove X550 driver config of KX4 PHY
2016-01-14 Wenzhuo Luixgbe/base: check MAC type when setting X550 callbacks
2015-06-26 Wenzhuo Luixgbe/base: fix X550em CS4227 speed mode
2015-06-26 Wenzhuo Luixgbe/base: fix X550em flow control to be KR only
2015-06-26 Wenzhuo Luixgbe/base: disable software LPLU implementation for...
2015-06-26 Wenzhuo Luixgbe/base: add X557 PHY LEDs support
2015-06-26 Wenzhuo Luixgbe/base: configure MDIO clock for X550em
2015-06-26 Wenzhuo Luixgbe/base: check X550em link again after getting speed
2015-06-26 Wenzhuo Luixgbe/base: remove FEC disablement for X550em
2015-06-26 Wenzhuo Luixgbe/base: add X550em KR/iXFI internal link mode support
2015-06-26 Wenzhuo Luixgbe/base: update EEE/FEC support for X550EM_X_KR
2015-06-26 Wenzhuo Luixgbe/base: enable X550 FEC when EEE is disabled
2015-06-26 Wenzhuo Luixgbe/base: check for functional CS4227 ucode
2015-06-26 Wenzhuo Luixgbe/base: use a semaphore to serialize X550 IOSF...
2015-06-26 Wenzhuo Luixgbe/base: add wait helper for X550 IOSF accesses
2015-06-26 Wenzhuo Luixgbe/base: fix X550em UniPHY link configuration
2015-06-26 Wenzhuo Luixgbe/base: power down the X550em PHY on overtemp event
2015-06-26 Wenzhuo Luixgbe/base: check X550em SFP support
2015-06-26 Wenzhuo Luixgbe/base: fix X550em link setup without SFP
2015-06-26 Wenzhuo Luixgbe/base: fix uninitialized variable
2015-06-26 Wenzhuo Luixgbe/base: fix X550em SFP+ link stability
2015-06-26 Wenzhuo Luixgbe/base: restore advertised autoneg after setting...
2015-06-26 Wenzhuo Luixgbe/base: update X550em LPLU
2015-06-15 Wenzhuo Luixgbe/base: restrict EEE to X550em KR backplane
2015-06-15 Wenzhuo Luixgbe/base: add X550em PHY reset
2015-06-15 Wenzhuo Luixgbe/base: fix lan id before first i2c access
2015-06-15 Wenzhuo Luixgbe/base: fix lan id for X550em
2015-06-15 Wenzhuo Luixgbe/base: add X550em link check
2015-06-15 Wenzhuo Luixgbe/base: add X550em PHY interrupt and forced speeds
2015-06-15 Wenzhuo Luixgbe/base: add X550em autoneg flow control
2015-06-15 Wenzhuo Luixgbe/base: rework X550em PHY setup function
2015-06-15 Wenzhuo Luixgbe/base: fix init handling of X550em link down
2015-06-15 Wenzhuo Luixgbe/base: move i2c mux function for X550em
2015-06-15 Wenzhuo Luixgbe/base: new simplified X550em init flow
2015-06-15 Wenzhuo Luixgbe/base: fix X550em flow control for KR backplane
2015-06-15 Wenzhuo Luixgbe/base: add X550em LPLU support
next