Patrick Fu [Tue, 27 Oct 2020 02:06:08 +0000 (10:06 +0800)]
vhost: fix guest/host physical address conversion
gpa_to_hpa() function almost always fails due to the wrong setup of
the binary tree search key. Since there has already been a similar
function gpa_to_first_hpa() available in the vhost, instead of fixing
the issue in its original logic, gpa_to_hpa() function is rewritten to
be a wrapper of the gpa_to_first_hpa() to avoid code redundancy.
Fixes: e246896178e6 ("vhost: get guest/host physical address mappings") Fixes: faa9867c4da2 ("vhost: use binary search in address conversion") Cc: stable@dpdk.org Signed-off-by: Patrick Fu <patrick.fu@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Mon, 26 Oct 2020 16:39:30 +0000 (17:39 +0100)]
net/virtio-user: set status on socket reconnect
Newer vhost-user backends will rely on SET_STATUS to start the device
so this required to support them.
Fixes: 57912824615f ("net/virtio-user: support vhost status setting") Cc: stable@dpdk.org Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Mon, 26 Oct 2020 16:39:29 +0000 (17:39 +0100)]
net/virtio-user: do not assume vhost status feature
There are some status reads and updates that need to happen before the
protocol features are negotiated. Therefore, assuming the backend does
support this feature can lead to failures.
On server mode, do not assume the backend supports
VHOST_USER_PROTOCOL_F_STATUS. Activate it back on reconnection and
clear it on disconnection.
Fixes: 57912824615f ("net/virtio-user: support vhost status setting") Cc: stable@dpdk.org Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Mon, 26 Oct 2020 16:39:27 +0000 (17:39 +0100)]
net/virtio-user: ignore result if status is unsupported
GET/SET STATUS is an optional feature, so it may not be negotiated. In
that case, the VIRTIO_GET_STATUS call will not update the status (given
as a pointer argument). Failing to identify this case would lead to
undefined behavior as the device status will be updated with the value
of a stack-allocated variable.
To fix this, return ENOTSUP if the feature is not supported and, in that
case, don't update device status.
Fixes: 44102e6298e7 ("net/virtio: check protocol feature in user backend")
Cc stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Mon, 26 Oct 2020 16:39:26 +0000 (17:39 +0100)]
net/virtio-user: do not assume features are negotiated
According to the virtio spec, ACK and DRIVER status bits should be set
before feature negotiation.
However, until the protocol features are negotiated, the driver does not
know if the device actually supports those vhost-user messages.
Therefore, until FEATURES_OK is set, the GET/SET_STATUS messages should
not be sent.
Fixes: 57912824615f ("net/virtio-user: support vhost status setting") Cc: stable@dpdk.org Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
The rte_atomic API is deprecated and needs to be replaced with
C11 atomic builtins. Use the relaxed ordering and explicit
memory barrier for Clock Queue and timestamps synchronization.
Suanming Mou [Wed, 28 Oct 2020 09:33:47 +0000 (17:33 +0800)]
net/mlx5: fix sample register error flow
Currently, sample flow need to prepare and register the sub-actions
before sample action is created.
Once the same sample action exists, the sub-actions registered by
the second flow should be released, or these sub-actions will be
leaked. Since the exist sample action only release these same
sub-actions when the sample action itself releases.
When same sample action exists, call the sub-action release function
for the later flow to release the redundant prepared sub-actions.
Fixes: 0756228b2704 ("net/mlx5: update translate function for sample action") Signed-off-by: Suanming Mou <suanmingm@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Suanming Mou [Wed, 28 Oct 2020 09:33:46 +0000 (17:33 +0800)]
net/mlx5: simplify sample attributes
Currently, the sample action resource already has ft_type to indicate
the action domain attribute, the extra flow attributes parameter can
be optimized.
This commit uses action resource ty_type as domain attribute instead of
the flow attribute.
Xueming Li [Wed, 28 Oct 2020 09:33:40 +0000 (17:33 +0800)]
net/mlx5: introduce thread safe linked list cache
New API of linked list for cache:
- Optimized for small amount cache list.
- Optimized for read-most list.
- Thread safe.
- Since number of entries are limited, entries allocated by API.
- For dynamic entry size, pass 0 as entry size, then the creation
callback allocate the entry.
- Since number of entries are limited, no need to use indexed pool to
allocate memory. API will remove entry and free with mlx5_free.
- Search API is not supposed to be used in multi-thread.
Signed-off-by: Xueming Li <xuemingl@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Suanming Mou [Wed, 28 Oct 2020 09:33:37 +0000 (17:33 +0800)]
net/mlx5: remove unused mreg copy
After non-cache mode feature was implemented, the flows can only be
created when port started. No need to check if the mreg flows are
created in port stopped status, and apply the mreg flows after port
start will also never happen.
This commit removed the relevant not used mreg copy code.
Suanming Mou [Wed, 28 Oct 2020 09:33:34 +0000 (17:33 +0800)]
net/mlx5: fix redundant Direct Verbs resources allocate
All table, tag, header modify, header reformat are supported only on DV
mode. For the OFED version doesn't support these, create the related
redundant DV resources waste the memory.
Add the code section in the HAVE_IBV_FLOW_DV_SUPPORT macro to avoid the
redundant resources allocation.
Suanming Mou [Wed, 28 Oct 2020 09:33:32 +0000 (17:33 +0800)]
net/mlx5: add flow table tunnel offload attribute
As flow table is shared between the ports in the same shared IB device,
flow table may be created by one port and released by other port.
Currently, the tunnel offloading active check in flow table release is
based on the port which release the flow table. Since the flow table
create port and release port may have different tunnel offloading
configuration, it will cause invalid tunnel offloading release or
tunnel offloading resource leaks.
Add the flow table tunnel offloading attribute to indicate the flow
table has tunnel offloading resource or not to avoid wrong tunnel
offloading operation.
Xueming Li [Wed, 28 Oct 2020 09:33:31 +0000 (17:33 +0800)]
net/mlx5: support concurrent access for hash list
In order to support hash list concurrent access, adding next:
1. List level read/write lock.
2. Entry reference counter.
3. Entry create/match/remove callback.
4. Remove insert/lookup/remove function which are not thread safe.
5. Add register/unregister function to support entry reuse.
For better performance, lookup function uses read lock to
allow concurrent lookup from different thread, all other hash list
modification functions uses write lock which blocks concurrent
modification and lookups from other thread.
The exact objects change will be applied in the next patches.
Signed-off-by: Xueming Li <xuemingl@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Suanming Mou [Wed, 28 Oct 2020 09:33:30 +0000 (17:33 +0800)]
net/mlx5: create global drop action
This commit creates the global drop action for flows instead of
maintain it in flow insertion time. The uniqueu global drop action
makes it thread safe.
Suanming Mou [Wed, 28 Oct 2020 09:33:28 +0000 (17:33 +0800)]
net/mlx5: create global jump action
This commit changes the jump action in table to be created with table
creation in advanced. In this case, the jump action is safe to be used
in multiple thread. The jump action will be destroyed when table is not
used anymore and released.
Suanming Mou [Wed, 28 Oct 2020 09:33:26 +0000 (17:33 +0800)]
net/mlx5: make meter action thread safe
This commit adds the spinlock for the meter action to make it be thread
safe. Atomic reference counter in all is not enough as the meter action
should be created synchronized with reference counter increment. With
only atomic reference counter, even the counter is increased, the action
may still not be created.
Xueming Li [Wed, 28 Oct 2020 09:33:24 +0000 (17:33 +0800)]
net/mlx5: use indexed pool as id generator
The ID generation API used an integer pool to save released ID, To
support multiple flow, it has to be enhanced to be thread safe.
Indexed pool could be used to generate unique ID by setting size of pool
entry to zero. Since bitmap is used, an extra benefits is saving memory
to about one bit per entry. Further more indexed pool could be thread
safe by enabling lock.
This patch leverages indexed pool to generate ID, removes
unused ID generating API.
Signed-off-by: Xueming Li <xuemingl@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Xueming Li [Wed, 28 Oct 2020 09:33:22 +0000 (17:33 +0800)]
net/mlx5: reuse flow id as hairpin id
Hairpin flow matching required a unique flow ID for matching.
This patch reuses flow ID as hairpin flow ID, this will save some code
to generate a separate hairpin ID, also saves flow memory by removing
hairpin ID.
Signed-off-by: Xueming Li <xuemingl@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Xueming Li [Wed, 28 Oct 2020 09:33:21 +0000 (17:33 +0800)]
net/mlx5: use thread specific flow workspace
As part of multi-thread flow support, this patch moves flow intermediate
data to thread specific, makes them a flow workspace. The workspace is
allocated per thread, destroyed along with thread life-cycle.
Signed-off-by: Xueming Li <xuemingl@nvidia.com> Acked-by: Matan Azrad <matan@nvidia.com>
Suanming Mou [Wed, 28 Oct 2020 09:33:20 +0000 (17:33 +0800)]
net/mlx5: use thread safe index pool for flow objects
As mlx5 PMD is changed to be thread safe, all the flow-related
sub-objects inside the PMD should be thread safe. This commit
changes the index memory pools' lock configuration to be enabled.
That makes the index pool be thread safe.
Bing Zhao [Tue, 27 Oct 2020 14:46:54 +0000 (22:46 +0800)]
net/mlx5: add flow sync API
When creating a flow, the rule itself might not take effort
immediately once the function call returns with success. It would
take some time to let the steering synchronize with the hardware.
If the application wants the packet to be sent to hit the flow after
it is created, this flow sync API can be used to clear the steering
HW cache to enforce next packet hits the latest rules.
For TX, usually the NIC TX domain and/or the FDB domain should be
synchronized depends in which domain the flow is created.
The application could also try to synchronize the NIC RX and/or the
FDB domain for the ingress packets.
Signed-off-by: Bing Zhao <bingz@nvidia.com> Acked-by: Ori Kam <orika@nvidia.com> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Bing Zhao [Tue, 27 Oct 2020 14:46:53 +0000 (22:46 +0800)]
common/mlx5: add glue function for domain sync
In rdma-core, the "mlx5dv_dr_domain_sync" function was already
provided. It is used to flush the rule submission queue. The wrapper
function in the glue layer is added for using this.
It only supports DR flows right now the same as domain creating and
destroying functions.
Signed-off-by: Bing Zhao <bingz@nvidia.com> Acked-by: Ori Kam <orika@nvidia.com> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The rte_atomic API is deprecated and needs to be replaced with
C11 atomic builtins. Use the relaxed ordering for RTE flow tables.
Enforce Acquire/Release model for managing DevX pools.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The rte_atomic API is deprecated and needs to be replaced with
C11 atomic builtins. Use __atomic_add_fetch instead of
rte_atomic32_add_return to generate a Netlink sequence number.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Matan Azrad [Tue, 27 Oct 2020 06:43:25 +0000 (06:43 +0000)]
net/mlx5: fix Tx queue start
The Tx queue stop\start operations update the HW state of the Tx queue
object. The stop API should update the state from ready to reset in
order to stop any queue traffic and the start API should update the
state from reset to ready in order to open the traffic path.
The start API wrongly tried to change the state from ready to ready what
caused a failure in FW on the current state validation.
Replace ready to ready command by reset to ready command in the Tx start
API.
Raslan Darawsheh [Mon, 26 Oct 2020 11:41:47 +0000 (13:41 +0200)]
common/mlx5: add ConnectX-7 and Bluefield-3 device IDs
This adds the ConnectX-7 and Bluefield-3 device ids to the list of
supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
Bing Zhao [Mon, 26 Oct 2020 16:37:46 +0000 (00:37 +0800)]
net/mlx5: do not split hairpin flow in explicit mode
In the current implementation, the hairpin flow will be split into
two flows implicitly if there is some action that only belongs to the
Tx part. A Tx device flow will be inserted by the mlx5 PMD itself.
In hairpin between two ports, the explicit Tx flow mode will be the
only one to be supported. It is not the appropriate behavior to
insert a Tx flow into another device implicitly. The application
could create any flow as it likes and has full control of the user
flows. Hairpin flows will have no difference from standard flows and
the application can decide how to chain Rx and Tx flows together.
Even in the single port hairpin, this explicit Tx flow mode could
also be supported.
When checking if the hairpin needs to be split, it will just return
if the hairpin queue is with "tx_explicit" attribute. Then in the
following steps for validation and translation, the code path will
be the same as that for standard flows.
Bing Zhao [Mon, 26 Oct 2020 16:37:45 +0000 (00:37 +0800)]
net/mlx5: change hairpin ingress flow validation
In the current implementation of the single port hairpin, there is
an implicit splitting process for actions. When inserting a hairpin
flow, all the actions will be included with the ingress attribute.
The flow engine will check and decide which actions should be moved
into the TX flow part, e.g., encapsulation, VLAN push.
In some NICs, some actions can only be done in one direction. Since
the hairpin flow will be split into two parts, such validation will
be skipped.
With the hairpin explicit TX flow mode, no splitting is needed any
more. The hairpin flow may have no big difference from a standard
flow (except the queue). The application should take full charge of
the actions and the flow engine should validate the hairpin flow in
the same way as other flows.
In the meanwhile, a new internal API is added to get the hairpin
configuration. This will bypass the useless atomic operation to save
the CPU cycles.
Bing Zhao [Mon, 26 Oct 2020 16:37:44 +0000 (00:37 +0800)]
net/mlx5: add conditional hairpin auto bind
In single port hairpin mode, after the queues are configured during
start up. The binding process will be enabled automatically in the
port start phase and the default control flow for egress will be
created.
When switching to two ports hairpin mode, the auto binding process
should be skipped if there is no TX queue with the peer RX queue on
the same device, and it should be skipped also if the queues are
configured with manual bind attribute.
If the explicit TX flow rule mode is configured or hairpin is
between two ports, the default control flows for TX queues should
not be created.
Bing Zhao [Mon, 26 Oct 2020 16:37:43 +0000 (00:37 +0800)]
net/mlx5: support getting hairpin peer ports
In real-life business, one device could be attached and detached
dynamically. The hairpin configuration of this port to/from all the
other ports should be enabled and disabled accordingly.
The RTE ethdev lib and PMD should provide this ability to get the
peer ports list in case that the application doesn't save it. It is
recommended that the size of the array to save the port IDs is as
large as the "RTE_MAX_ETHPORTS" to have the maximal capacity.
The order of the peer port IDs may be different from that during
hairpin queues set in the initialization stage. The peer port ID
could be the same as the current device port ID when the hairpin
peer ports contain itself - the single port hairpin.
The application should check the ports' status and decide if the
peer port should be bound / unbound when starting / stopping the
current device.
Bing Zhao [Mon, 26 Oct 2020 16:37:42 +0000 (00:37 +0800)]
net/mlx5: support two ports hairpin mode
In order to support hairpin between two ports, mlx5 PMD needs to
implement the functions and provide them as the function pointers.
The bind and unbind functions are executed per port pairs. All the
hairpin queues between the two ports should have the same attributes
during queues setup. Different configurations among queue pairs from
the same ports are not supported. It is allowed that two ports only
have one direction hairpin.
In order to set up the connection between two queues, peer Rx queue
HW information must be fetched via the internal RTE API and the queue
information could be used to modify the SQ object. Then the RQ object
will be modified with the Tx queue HW information. The reverse
operation is not supported right now.
When disconnecting the queues pair, SQ and RQ object should be reset
without any peer HW information. The unbinding operation will try to
disconnect all Tx queues from the port from the Rx queues of the peer
port.
Tx explicit mode attribute will be saved and used when creating a
hairpin flow.
Bing Zhao [Mon, 26 Oct 2020 16:37:41 +0000 (00:37 +0800)]
net/mlx5: change hairpin queue peer checking
In the current implementation of single port mode hairpin, the peer
queue should belong to the same port of the current queue. When the
two ports hairpin mode is introduced, such checking should be removed
to make the hairpin queue setup execute successfully since it is not
an invalid condition, if the Tx port and Rx port are not the same.
In the meanwhile, different devices could have different queue
configurations. The queues number of peer port is unknown to the
current device. The checking should be removed also.
If the Tx and Rx port IDs of a hairpin peer are different, only the
manual binding and explicit Tx flows are supported. Or else, the four
combinations of modes could be supported. The mode attributes
consistency checking will be done when connecting the queue with its
peer queue.
Bing Zhao [Mon, 26 Oct 2020 08:37:42 +0000 (16:37 +0800)]
common/mlx5: fix PCI driver name
In the refactor of mlx5 common layer, the PCI driver name to the RTE
device was changed from "net_mlx5" to "mlx5_pci". The string of name
"mlx5_pci" is used directly in the structure rte_pci_driver.
In the past, a macro "MLX5_DRIVER_NAME" is used instead of any direct
string, and now it is missing. The functions that use
"MLX5_DRIVER_NAME" will get some mismatch, e.g mlx5_eth_find_next.
It needs to use this macro again in all code to make everything get
aligned.
Rahul Gupta [Mon, 26 Oct 2020 03:56:16 +0000 (20:56 -0700)]
net/bnxt: fix Rx performance by removing spinlock
The spinlock was trying to protect scenarios where rx_queue stop/start
could be initiated dynamically. Assigning bnxt_dummy_recv_pkts and
bnxt_dummy_xmit_pkts immediately to avoid concurrent access of mbuf in Rx
and cleanup path should help achieve the same result.
Ajit Khaparde [Mon, 26 Oct 2020 03:56:15 +0000 (20:56 -0700)]
net/bnxt: set thread safe flow ops flag
PMD supports thread-safe flow operations. Set the
RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE dev_flag to indicate this info
to the application. rte_flow API functions can avoid using its
own mutex for safe multi-thread flow handling.
Ajit Khaparde [Mon, 26 Oct 2020 03:56:14 +0000 (20:56 -0700)]
net/bnxt: fix resetting mbuf data offset
Reset mbuf->data_off before handing the Rx packet to the application.
We were not doing this in the TPA path. It can cause applications
using this field for post processing to work incorrectly.
Ajit Khaparde [Mon, 26 Oct 2020 03:56:13 +0000 (20:56 -0700)]
net/bnxt: increase size of Rx CQ
LRO aka TPA and jumbo frame support uses aggregation ring for placing
Rx buffers. These features can generate multiple Rx completions for a
single Rx packet. Increase size of Rx Completion Queue to handle TPA
and aggregation ring events.
Fixes: daef48efe5e5 ("net/bnxt: support set MTU") Cc: stable@dpdk.org Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com> Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Venkat Duvvuru [Mon, 26 Oct 2020 03:56:12 +0000 (20:56 -0700)]
net/bnxt: support VXLAN decap offload
VXLAN decap offload can happen in stages. The offload request may
not come as a single flow request rather may come as two flow offload
requests F1 & F2. This patch is adding support for this two stage
offload design. The match criteria for F1 is O_DMAC, O_SMAC,
O_DST_IP, O_UDP_DPORT and actions are COUNT, MARK, JUMP. The match
criteria for F2 is O_SRC_IP, O_DST_IP, VNI and inner header fields.
F1 and F2 flow offload requests can come in any order. If F2 flow
offload request comes first then F2 can’t be offloaded as there is
no O_DMAC information in F2. In this case, F2 will be deferred until
F1 flow offload request arrives. When F1 flow offload request is
received it will have O_DMAC information. Using F1’s O_DMAC, driver
creates an L2 context entry in the hardware as part of offloading F1.
F2 will now use F1’s O_DMAC to get the L2 context id associated with
this O_DMAC and other flow fields that are cached already at the time
of deferring F2 for offloading. F2s that arrive after F1 is offloaded
will be directly programmed and not cached.
Venkat Duvvuru [Mon, 26 Oct 2020 03:56:11 +0000 (20:56 -0700)]
net/bnxt: add VXLAN decap templates
Templates for outer tunnel & inner tunnel flow are added in this patch.
This will be used by subsequent patches to implement support for
VXLAN decap rte_flow offload.
Venkat Duvvuru [Mon, 26 Oct 2020 03:56:10 +0000 (20:56 -0700)]
net/bnxt: refactor flow id allocation
Currently, the flow id is allocated inside ulp_mapper_flow_create.
However with vxlan decap feature if F2 flow comes before F1 flow
then F2 is cached and not really installed in the hardware which
means the code will return without calling ulp_mapper_flow_create.
But, ULP has to still return valid flow id to the stack.
Hence, move the flow id allocation outside ulp_mapper_flow_create.
Added support for the key and mask fields encoding for the
wildcard TCAM entry. Also add internal function to post process
the key/mask blobs for wildcard TCAM table. The size of the
wildcard TCAM slice is 80 bytes.
Somnath Kotur [Mon, 26 Oct 2020 03:56:08 +0000 (20:56 -0700)]
net/bnxt: modify HWRM command to create reps
Use cfa pair alloc for configuring reps.
Instead of cfa_vfr_alloc for Wh+ and cfa_pair_alloc for Stingray,
converge to cfa_pair_alloc/free for both devices. Set the command
request structure bits accordingly.
As part of this, remove the old cfa_vfr_alloc cmd definitions as FW
has deprecated support for those commands.
Add support for hierarchical flow counter accumulation.
In case of hierarchical flows, involving parent and child flows,
the child flow counters are aggregated to get the parent flow counter
information. This should help in cases where one ore more flows
is related to a previously offloaded flow.
Somnath Kotur [Mon, 26 Oct 2020 03:56:06 +0000 (20:56 -0700)]
net/bnxt: fix flow query count
Fix infinite loop in flow query count.
`nxt_resource_idx` could be zero in some cases which is invalid and
should be part of the while loop condition. Also synchronize access to
the flow db using the fdb_lock
Update ULP resource counts for Stingray device.
- FW needs some resources for normal operation. Account those
in the resource manager.
- Update the SR ULP requested resource counts to reflect
those available after AFM resources are accounted for.
- Add build option to select either 2 or 4 slot EM entries.
The default is 4 slot entries.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com> Signed-off-by: Farah Smith <farah.smith@broadcom.com> Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Farah Smith [Mon, 26 Oct 2020 03:56:04 +0000 (20:56 -0700)]
net/bnxt: add table scope to PF mapping
Add table scope to PF Mapping for SR and Wh+ devices.
Legacy devices require PF set of base addresses for EEM operation.
A table scope id is a logical construct and is mapped to the PF
associated with the communications channel used.
In the case of a VF, the parent PF is used.
Signed-off-by: Farah Smith <farah.smith@broadcom.com> Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Jay Ding [Mon, 26 Oct 2020 03:56:03 +0000 (20:56 -0700)]
net/bnxt: support two table scopes
Adding support for two table scopes. One for Exact Match tables
and other for External Exact Match tables.
New API to map a PARIF to an EEM table scope (set of Rx and Tx EEM
base addresses). It uses HWRM_TF_GLOBAL_CFG_SET HWRM to configure.
PARIF is handler to a partition of the physical port.
Adjustments to tf_global_cfg_set() to reduce overhead and nominal
name clarification.
Signed-off-by: Jay Ding <jay.ding@broadcom.com> Signed-off-by: Farah Smith <farah.smith@broadcom.com> Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Moved P4 chip specific code under the P4 directory
- Added P45 skeleton code for SR to build on
- Add SR support in TRUFLOW core layer.
The TRUFLOW core or the tf-core is a shim layer which communicates with
the CFA block in the hardware.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com> Signed-off-by: Jay Ding <jay.ding@broadcom.com> Reviewed-by: Farah Smith <farah.smith@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Qi Zhang [Tue, 20 Oct 2020 03:48:57 +0000 (11:48 +0800)]
net/ice/base: specify global RSS LUT id in get/set RSS LUT
There is no way to specify a global RSS lookup table (LUT) ID with the
current API and 0 is the only global LUT ID that can be supported since
it's hard coded.
Upcoming support to specify a global LUT ID will require this
flexibility. To fix this, update the API for ice_aq_get_rss_lut() and
ice_aq_set_rss_lut() to take the new structure
ice_aq_get_set_rss_params, which includes a global_lut_id member. A new
structure was introduced instead of adding another parameter to the
previously mentioned functions for 2 reasons:
1. Reduce the number of parameters passed to the functions.
2. Reduce the amount of change required if the arguments ever need to be
updated in the future.
Also, reduce duplicate code that was checking for an invalid vsi_handle
and lut parameter by moving the checks to the lower level
__ice_aq_get_set_rss_lut().
Qi Zhang [Tue, 20 Oct 2020 02:43:08 +0000 (10:43 +0800)]
net/ice/base: refactor RSS configure API
Use struct ice_rss_hash_cfg as parameter for
ice_add_rss_cfg, ice_add_rss_cfg_sync and
ice_rem_rss_cfg, ice_rem_rss_cfg_sync.
Introduce enmu ice_rss_cfg_hdr_type to allow user specify the more
flexible RSS configure.
ICE_RSS_OUTER_HEADERS - take outer layer as RSS inputset
ICE_RSS_INNER_HEADERS - take inner layer as RSS inputset
ICE_RSS_INNER_HEADERS_W_OUTER_IPV4
- take inner layer as RSS inputset for packet with outer IPV4
ICE_RSS_INNER_HEADERS_W_OUTER_IPV6
- take inner layer as RSS inputset for packet with outer IPV6
ICE_RSS_ANY_HEADERS - try with outer first then inner
(same as the behaviour without this change)
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Qi Zhang [Tue, 20 Oct 2020 01:26:08 +0000 (09:26 +0800)]
net/ice/base: remove duplicated AQ command flag setting
When sending the indirect Read/Write SFF EEPROM AQ command. The flag is
already added later in the code flow for all indirect AQ commands, i.e.
commands that provide an additional data buffer.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Qi Zhang [Tue, 20 Oct 2020 01:00:40 +0000 (09:00 +0800)]
net/ice/base: recognize 860 as iSCSI port in CEE mode
iSCSI can use both TCP ports 860 and 3260. However, in our current
implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command
doesn't provide a way to communicate the protocol port number to the
AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the
AQ's caller layer.
In this patch, we will rely on the dcbx-willing mode, desired QOS and
remote QOS configuration to determine which port number that iSCSI will
use.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Qi Zhang [Tue, 20 Oct 2020 00:52:03 +0000 (08:52 +0800)]
net/ice/base: implement shared rate limiter
Implemented shared bandwidth rate limit functionality to account for
dedicated bandwidth and minimum bandwidth. It requires non default
profile be programmed for CIR, EIR/PIR, and SRL.
Currently QSFP/SFP modules up to power class 4 are supported.
100G modules require higher power in many cases.
Also, low power mode requires support of power classes 7 and even 8.
This change extends "Get Link Status" AQ command (0x0607) to
support class 5+ modules.
The patch also add couple other missing bits for link status.
Signed-off-by: Shay Amir <shay.amir@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: use package info from ice segment metadata
There are two package versions in the package binary. Today, these two
version numbers are the same. However, in the future that may change.
Update code to use the package info from the ice segment metadata
section, which is the package information that is actually downloaded to
the firmware during the download package process.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
net/ice/base: allocate and free RSS global lookup table
Currently there is no API to allocate and free a RSS global LUT.
Incoming changes to support VFs having >16 queues will require using
RSS global LUT resources. The functions included will allow a PF to
configure a RSS global LUT for VFs that request >16 queues.
The main NVM module and the Option ROM module contain a security
revision in their CSS header. This security revision is used to
determine whether or not the signed module should be loaded at bootup.
If the module security revision is lower than the associated minimum
security revision, it will not be loaded.
The CSS header does not have a module id associated with it, and thus
requires flat NVM reads in order to access it. To do this, take
advantage of the cached bank information. Introduce a new
"ice_read_flash_module" function that takes the module and bank to read.
Implement both ice_read_active_nvm_module and
ice_read_active_orom_module. These functions will use the cached values
to determine the active bank and calculate the appropriate offset.
Using these new access functions, extract the security revision for both
the main NVM bank and the Option ROM into the associated info structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
Added NVM Write Admin Command (0x703) ARQ response flags - as
returned in "Response flags" field.
Three flags are supported: POR, PERST and EMPR. All indicate the
type of reset required to get the NVM bank update effective.
Signed-off-by: Shay Amir <shay.amir@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Acked-by: Qiming Yang <qiming.yang@intel.com>
git.droids-corp.org / dpdk.git / log