bus/ifpga: add Intel FPGA bus library

Defined FPGA-BUS for Acceleration Drivers of AFUs

1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.

2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.

This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.

Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>

crypto/ccp: support run-time CPU based auth

CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.

Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>

bbdev: change names of baseband devices

Change baseband device name:
 - from turbo_sw to baseband_turbo_sw
 - from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

doc: add compression driver and ISA-L PMD guides

This adds general compression drivers feature guide
as well as the ISA-L PMD documentation and guide.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add ISA-L decomp functionality

Adds decompression functionality, similar to compression,
this sets internal ISA-L structures, provides input & output mbuf
addresses, executes decompression, which ISA-L calls inflate and
finally error checks.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Greg Tucker <greg.b.tucker@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add ISA-L compression functionality

Adds compression functionality, this sets internal ISA-L
structures, provides input & output mbuf addresses,
executes compression, which ISA-L calls deflate,
and finally error checks.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Greg Tucker <greg.b.tucker@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add stats related ops

Add functions for statistic retrieval and resetting.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: support burst enqueue/dequeue

This patchs adds support for the compressdev enqueue_burst
and dequeue_burst API operations.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add queue pair related ops

This adds queue pair operations such as setup and release.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add private xform related ops

This patch  creates, configures and frees the private xform, taking the
applications xform and using it to populate the PMDs own private xform
with the information which will be required for the compress/decompress
functions. This information includes the level, algorithm,
type of huffman code, type of checksum etc.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add basic PMD ops

Add basic device poll mode driver operations to
give ability to start, stop, close device etc.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add device init and de-init

This patch adds device initialization functionality such as
probe and create, also adding deinitialize functionality.
Dynamic logging component also added.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

compress/isal: add skeleton ISA-L compression PMD

Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.

The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.

Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

doc: update bbdev test app guide

Update the test app documentation:
- description of tests added
- usage of test app updated

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

doc: add shared lib building instructions for bbdev

Added a note to enable building as a shared lib.

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

doc: update bbdev guide

Update the documentation describing Wireless Baseband Device:
- device capabilities updated
- input/output data buffers description added
- details about implementation of turbo encode/decode
  operation added

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

app/bbdev: improve readability

Improve readability of test application by replacing
int values with rte_bbdev_event_type enum.

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

app/bbdev: add new test vectors

Creation of new vectors to test and validate BBDevice capabilities
Test app documentation updated accordingly

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

app/bbdev: update default test vectors

Update test vectors directory for Wireless Baseband Device:
- update test vectors names
- python script used for tests execution updated

Update the test app documentation:
- vector test names updated

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

bbdev: split queue groups

Splitting Queue Groups into UL/DL Groups in Turbo Software
Driver. They are independent for Decode/Encode.
Release note updated accordingly.

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

bbdev: measure offload cost

New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: support optional CRC overlap

Support for optional CRC overlap in decode processing implemented
in Turbo Software driver

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: increase internal buffers

Sizes of the internal buffers used by decoding were increased due to
problem with memory for large vectors

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: scale likelihood ratio input

Update Turbo Software driver for Wireless Baseband Device:
- function scaling input LLR values to specific range [-16, 16] added
- new test vectors to check device capabilities added
- release note updated accordingly

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: move macros to bbdev library

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: optimize memory copy

Optimization of Turbo Software driver by limiting or changing
usage of memory copying function.

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

baseband/turbo_sw: support FlexRAN 1.4.0

Adjusting BaseBand drivers code to changes in FlexRAN 1.4.0:
- update usage of crc functions after API changes

Update the documentation describing Wireless Baseband Device:
- FlexRAN releases mapping table added
- download and build instructions for BBDEV turbo_sw driver in
  compliance with FlexRAN 1.4.0 release added

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>

examples/ipsec-secgw: limit inflight packets count

Revert previous patch that introduce a performance
degradation in certain scenarios and add a configurable
limit for number inflight packets.

Revert
commit 84d4b5e4ec48 ("examples/ipsec-secgw: improve IPsec dequeue logic")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

app/crypto-perf: check minimum lcore number

The crypto performance application requires at least
two cores: one master core that launches the other slaves
and one core acting as slave running the crypto device.

Fixes: f8be1786b1b8 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

test/crypto: enhance scheduler unit tests

Unit test cases for Multi-core mode, Fail-over mode,
anf Packet distribution mode are added to improve code coverage.

Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/dpaa2_sec: remove IOVA conversion for fle address

fle is already in virtual addressing mode - no need to perform
address conversion for it.

Fixes: 8d1f3a5d751b ("crypto/dpaa2_sec: support crypto operation")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

app/crypto-perf: fix burst size calculation

This patch fixes segmentation fault in pmd_cyclecount_bench_ops
function in case when state->opts->nb_descriptors is not
natural multiple of burst size.
To reproduce run: dpdk-test-crypto-perf with params:
  --ptest pmd-cyclecount --pmd-cyclecount-delay-ms 5 \
  --devtype crypto_qat --optype cipher-then-auth \
  --cipher-algo aes-cbc --cipher-op encrypt \
  --cipher-key-sz 16 --cipher-iv-sz 16 \
  --auth-algo sha2-256-hmac \
  --auth-op generate --auth-key-sz 64 --digest-sz 32 \
  --total-ops 10000 --burst-sz 255 --buffer-sz 1024 --silent

Fixes: 96dfeb609be1 ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/dpaa_sec: update maximum queue pairs to 8

The underlying hardware can support multiple queue pairs.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test/compress: add invalid configuration tests

Add tests that check if device configuration
is not successful when providing invalid parameters.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>

test/compress: add multi xform test

Add test that checks if multiple xforms can be
handled on a single enqueue call.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>

test/compress: add multi level test

Add test that checks if all compression levels
are supported and compress a buffer correctly.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>

test/compress: add multi op test

Add test that checks if multiple operations with
different buffers can be handled on a single enqueue call.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>

test/compress: add initial unit tests

This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.

Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>

doc: add compressdev library guide

Add section in programmer’s guide for Compressdev library.

Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: get device id from name

Added API to retrieve the device id provided the device name.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add device capabilities

Added structure which each PMD will fill out,
providing the capabilities of each driver
(containing mainly which compression services
it supports).

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add device stats

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add compression service feature flags

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add device feature flags

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: support hash operations

- Added hash algo enumeration and params in xform and rte_comp_op
- Updated compress/decompress xform to input hash algorithm
- Updated struct rte_comp_op to input hash buffer

User in capability query will know about support hashes via
device info comp_feature_flag. If supported, application can initialize
desired algorithm enumeration in xform structure and pass valid hash
buffer during enqueue_burst().

Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: support stateful operations

Added stream data (stream) in compression operation,
which will contain the private data from each PMD
to support stateful operations.
Also, added functions to create/free this data.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: support stateless operations

Added private transform data (priv_xform) in compression
operation, which will contain the private data from each
PMD to support stateless operations.
Also, added functions to create/free this data.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add operation management

Added functions to allocate and free compression operations.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add enqueue/dequeue functions

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add compression specific data

Added structures and enums specific to compression,
including the compression operation structure and the
different supported algorithms, checksums and compression
levels.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add queue pair management

Add functions to manage device queue pairs.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

compressdev: add basic device management

Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>

crypto/scheduler: fix memory leak

If private context creation fails, the memory
allocated for it and for some of the rings created
was being leaked.
In case of failure, it must be freed.

Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

crypto/scheduler: set null pointer after freeing

When freeing memory, pointers should be set to NULL,
to avoid memory corruption/segmentation faults.

Fixes: 31439ee72b2c ("crypto/scheduler: add API implementations")
Fixes: 50e14527b9d1 ("crypto/scheduler: improve parameters parsing")
Fixes: 57523e682bb7 ("crypto/scheduler: register operation functions")
Fixes: a783aa634410 ("crypto/scheduler: add packet size based mode")
Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

crypto/mrvl: rename PMD to mvsam

Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.

This patch addresses that and renames mrvl to mvsam.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

eventdev: make ethdev port identifiers 16-bit

Ethernet port ID data size has been extended to 16 bits size 17.11
Update the Rx event adapter interface and implementation accordingly.

This commit bumps the library version to refect the ABI change
caused by extending the ethernet port parameter in Rx adapter
functions from 8 to 16 bits.

Fixes: 9c38b704d280 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>

doc: add event crypto adapter guide

Add entries in the programmer's guide, API index, maintainer's file
and release notes for the event crypto adapter.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test: add event crypto adapter auto-test

Added testsuite to test the crypto adapter functionality.
The testsuite detects the HW/SW event & crypto devices and
their capabilities. Depending upon the capability, adapter
is confgured and modes are tested.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

eventdev: add crypto adapter implementation

This patch adds common code for the crypto adapter to support
SW and HW based transfer mechanisms. The adapter uses an EAL
service core function for SW based packet transfer and uses
the eventdev PMD functions to configure HW based packet
transfer between the crypto device and the event device.
This patch also adds adapter to the meson build system &
updates the necessary makefile & map file.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

eventdev: add driver interface of crypto adapter

This patch defines capabilities & functions to be called
for eventdev PMDs.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

eventdev: introduce event crypto adapter

This patch introduces event crypto adapter APIs. It
also provides information on working model/adapter
modes & their usage. Application is expected to use
this interface to transfer packets between the crypto
device & the event device.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

event/dpaa2: remove link from info structure

Removing use of link data under evq_info_t structure which was
used to check whether the the associated evq has been linked
or not. Since, an evq can be linked to multiple event ports,
thus setting the link variable only allowed the first event
port to be associated with the evq. This led to huge performance
drop in case of multiple event ports as I/O only worked on
first event port associated with the evq.

Fixes: 0ce3ce7c275c ("event/dpaa2: add configuration functions")
Cc: stable@dpdk.org
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

event/dpaa2: remove check on epoll return

Driver shouldn't take decision on signals received. The return
from epoll was blocking on EINTR which is not the right use-case.

Fixes: 36d87bb92230 ("event/dpaa2: handle timeout using interrupts in dequeue")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

test: fix build with gcc 4.8.5

Build errors occur on CentOS 7 with GCC 4.8.5 20150623 in the
event_timer_adapter_test autotest; the
-Werror=missing-field-initializers option causes the compiler to emit
messages like "error: missing initializer for field ‘priority’ of
‘struct <anonymous>’" in several places.

Add -Wno-missing-field-initializers to the test's CFLAGS to allow the
current syntax if we are using GCC 5.0 or lower.

Fixes: d1f3385d0076 ("test: add event timer adapter auto-test")

Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

mk: disable OcteonTx for buggy compilers

Disable octeontx for gcc 4.8.5 as compiler is emitting "internal
compiler error" for aarch64.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

event/octeontx: fix SPDX tag placement

Fixes: fd5baf09cdf9 ("event/octeontx: probe timvf PCIe devices")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

eventdev: convert eth Rx adapter files to SPDX license tag

Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

doc: update release notes for OcteonTx TIM driver

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>

event/octeontx: fix build with clang 6

Clang 6 & 7 fail to naturally align packed structs due to this clang
can't use 8byte atomic primitives and splits them into lesser atomic
primitives. To use lesser atomic primitives we need to link libatomic
(-latomic), instead supply alignment attribute to the compiler.

timvf_worker.c:(.text+0x498): undefined reference to `__atomic_fetch_add_8'
timvf_worker.c:(.text+0x525): undefined reference to `__atomic_store_2'
timvf_worker.c:(.text+0x557): undefined reference to `__atomic_fetch_add_4'
timvf_worker.c:(.text+0x5de): undefined reference to `__atomic_store_2'

Fixes: f874c1eb1519 ("event/octeontx: create and free timer adapter")

Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

table: add dedicated params struct for cuckoo hash

Add dedicated parameter structure for cuckoo hash. The cuckoo hash from
librte_hash uses slightly different prototype for the hash function (no
key_mask parameter, 32-bit seed and return value) that require either
of the following approaches:
   1/ Function pointer conversion: gcc 8.1 warning [1], misleading [2]
   2/ Union within the parameter structure: pollutes a very generic API
      parameter structure with some implementation dependent detail
      (i.e. key mask not available for one of the available
      implementations)
   3/ Using opaque pointer for hash function: same issue from 2/
   4/ Different parameter structure: avoid issue from 2/; hopefully,
      it won't be long before librte_hash implements the key mask feature,
      so the generic API structure could be used.

[1] http://www.dpdk.org/ml/archives/dev/2018-April/094950.html
[2] http://www.dpdk.org/ml/archives/dev/2018-April/096250.html

Fixes: 5a80bf0ae613 ("table: add cuckoo hash")

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

examples/ip_pipeline: replace strncpy with strlcpy

The destination string may not have a null termination if
the source string's length is equal to the sizeof.

Fix by replacing strncpy with strlcpy that guarantees NULL-termination.

[merged several commits]

Coverty issue: 272606
Fixes: d75c371e9b46 ("examples/ip_pipeline: add pipeline object")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Coverty issue: 272594
Fixes: 133c2c6565d6 ("examples/ip_pipeline: add link object")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Coverty issue: 272603
Fixes: 2f74ae28e23f ("examples/ip_pipeline: add tap object")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Coverity issue: 272588
Fixes: 6bfe74f8c93e ("examples/ip_pipeline: add mempool object")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Coverity issue: 272592
Fixes: 25961ff3bcb9 ("examples/ip_pipeline: add traffic manager object")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Coverity issue: 272562
Fixes: 9a408cc8ac ("examples/ip_pipeline: add KNI object")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Coverity issue: 272580
Fixes: 719374345c ("examples/ip_pipeline: add action profile objects")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Coverity issue: 272572
Fixes: 719374345cee ("examples/ip_pipeline: add action profile objects")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Coverity issue: 272563
Fixes: 8245472c58c8 ("examples/ip_pipeline: add sw queue object")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

examples/ip_pipeline: remove dead code in table command

Coverity issue: 272567
Fixes: d75c371e9b46 ("examples/ip_pipeline: add pipeline object")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

examples/ip_pipeline: fix uninitialized KNI parameter

Using uninitialized value p.thread_id when calling kni_create.
Initialize the kni_params object to 0.

Coverity issue: 272569
Fixes: 9a408cc8ac ("examples/ip_pipeline: add KNI object")

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

examples/ip_pipeline: fix uninitialized link parameter

Coverity issue: 272575
Fixes: 133c2c6565d6 ("examples/ip_pipeline: add link object")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

examples/ip_pipeline: fix leak on DSCP parsing

Close the file stream before returning from the function to avoid
memory leak.

Coverity issue: 272605
Fixes: 2b82ef4861c0 ("examples/ip_pipeline: add DSCP table update command")

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>

examples/ip_pipeline: fix leak on tap creation failure

Close tap device fd before returning upon failures.

Coverity issue: 272576
Fixes: 2f74ae28e2 ("examples/ip_pipeline: add tap object")

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

examples/ip_pipeline: fix leak on connection error

Closing the fd_server file descriptor on error to fix the resource leak.

Coverity issue: 272587
Fixes: 4bbf8e30aa5e ("examples/ip_pipeline: add CLI interface")

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

app/testpmd: add command to resume a TM node

Traffic manager provides an API for resuming
an arbitrary node in a hierarchy.

This commit adds support for calling this API
from testpmd.

Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

app/testpmd: add command to suspend a TM node

Traffic manager provides an API for suspending
an arbitrary node in a hierarchy.

This commit adds support for calling this API from testpmd.

Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>

sched: add post-init pipe profile API

Add new API function to add more pipe configuration profiles
post initialization to the set of exisitng profiles specified during
the creation of scheduler port.

This API removes the current limitation that forces the user
to define the full set of pipe profiles as the part of port parameters
while port is being created.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>

ethdev: support WRED thresholds in bytes

WRED thresholds can be specified in bytes if the TM leaf
node supports it. Also extend WRED thresholds to 32 bits from 16.

TM capability (port/level/queue) fields cman_wred_packet_mode_supported and
cman_wred_byte_mode_supported, when non-zero, indicate support for WRED
thresholds in packets and bytes respectively.

The packet_mode member of struct rte_tm_wred_params, when non-zero,
indicates that the min and max thresholds are specified in
packets and when zero, indicates that the min and max thresholds
are specified in bytes.

Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>

ethdev: fix TM API comment

The rte_tm_node_wfq_weight_mode_update() API function operates on
non-leaf nodes, not leaf nodes.

Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>

app/testpmd: fix copy of raw flow item

When calculate memory size of an RTE_FLOW_ITEM_TYPE_RAW 's mask
mask->length is not the real size of binary pattern, it should take
spec->length, or memory size will be over counted (0xffff) and invalid
memory be access during following memcpy.

Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>

mem: add argument to memory event callback

It may be useful to pass arbitrary data to the callback (such
as device pointers), so add this to the mem event callback API.

Suggested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>

mempool: fix alignment of memzone length when populating

When populating a mempool with the default function, if there is not
enough virtually contiguous memory for the whole mempool, it will be
populated with several chunks. A chunk of the maximum available length
is requested with:

  mz = rte_memzone_reserve_aligned(..., len=0, ..., align=x)

If align is smaller than the page size, the address and the length of
the memzone may not be a multiple of the page size. This makes
rte_mempool_populate_virt() to fail because it requires them to be
page-aligned. This patch fixes that.

The problem can be reproduced easily by allocating more than available
memory:
  ./build/app/testpmd -l 0,1 -- --total-num-mbufs=65536
  ...
  Cause: Creation of mbuf pool for socket 0 failed: Invalid argument

After the patch, the error code is correct:
  ./build/app/testpmd -l 0,1 -- --total-num-mbufs=65536
  ...
  Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate memory

Fixes: ba0009560c30 ("mempool: support new allocation methods")

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>

doc: add DPAA2 CMDIF rawdev guide

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_cmdif: support enqueue/dequeue operations

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_cmdif: add attribute get functionality

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_cmdif: introduce DPAA2 command interface driver

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

bus/fslmc: keep Tx queues information for DPCI devices

The DPCI devices have both Tx and Rx queues. Event devices use
DPCI Rx queues only, but CMDIF (AIOP) uses both Tx and Rx queues.
This patch enables Tx queues configuration too.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

bus/fslmc: expose API to free DPCI device

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

mempool/dpaa2: add functions for CMDIF

There are two API's which are required by NXP specific Command Interface
Application (AIOP CMDIF). This patch exposes these two API's.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

doc: add DPAA2 QDMA rawdev guide

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_qdma: support enqueue/dequeue operations

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_qdma: support configuration APIs

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

raw/dpaa2_qdma: introduce the DPAA2 QDMA driver

DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

bus/fslmc: add macros required by QDMA for FLE and FD

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

bus/fslmc: support scanning and probing of QDMA devices

'dpdmai' devices detected on fsl-mc bus are represented by DPAA2 QDMA
devices in DPDK.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

bus/fslmc: support MC DPDMAI object

This patch adds the DPDMAI (Data Path DMA Interface)
object support in MC driver.

Signed-off-by: Cristian Sovaiala <cristian.sovaiala@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

drivers/raw: support meson build

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>