git.droids-corp.org - dpdk.git/log

fm10k/base: fix a comment

The header comment included a miscopy of a C-code line, and also
mis-used Rx FIFO when it clearly meant Tx FIFO.

Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>

eal: add new i40e device id

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add outer UDP checksum for X722

Fixes a minor definition change in the Rx descriptor.
Also adds FortPark specific changes to the Descriptors.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add WOL/proxy capability parsing

Adds support to retrieve and parse WoL/Proxy capabilities from the
device/function list.
Also saves WR_CSR_PROT field from DEV/FUNC capabilities.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: support WOL config for X722

Adds admin q function for "Set Wake on LAN Filter AQ"
and "Get Wake Up Reason AQ".

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: support proxy config for X722

Adds admin q functions for "Set Proxying Configuration Command"
and "Set NS Proxy Table Entry Command".

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: support RSS for X722

Add AQ functions to handle RSS Key and LUT programming.
This is needed for FortPark RSS support.

FortPark has additional PCTYPES supported for RSS

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add X722 specific registers

This patch adds registers and bit field definitions specific to FortPark.
Most of these new registers are related to PE (IWARP), Reset, NVM, RSS
and ATR changes.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add X722 device

Add device ids for X722 devices

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: print FCoE capability

This is to allow quick check for FCoE capability is enabled or not
in device function before any SW overrides.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: support ESS

Add some delays specific to ESS/Veloce system.
This patch requires driver changes to define ESS_SUPPORT.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add definition of GLINT_CTL register

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: support pre-allocated pages for pd

The i40e_add_pd_table_entry() routine is being modified to handle both
cases where a backing page is passed and where backing page is allocated
in i40e_add_pd_table_entry().

For pble resource management, it is more efficient for it to manage its
backing pages. For VF, pble backing page addresses will be send to PF
driver for pble resource.

The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and
free only ones which were allocated in i40e_add_pd_table_entry().

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add checks for CEE APP priority validity

The firmware has added additional status information to allow software
to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in
CEE DCBX mode.

This patch adds to support those additional checks and will only add
applications to the software table that have oper and sync bits set
without any error.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: more Solaris config

In order to support some extra Solaris features the Solaris VF drivers need
additional configuration data from the PF that aren't provided with the current
virtual channel commands.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: fix padding in struct

The struct i40e_aqc_get_cee_dcb_cfg_v1_resp was originally defined with
word boundary layout issues, which most compilers deal with by silently
adding padding, making the actual struct larger than designed.
This patch adds an extra byte in fields reserved3 and reserved4 to directly
acknowledge that padding.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: remove useless assignments

The assignments of addr_high and addr_low were not only wrong because
they were assigning virtual addresses to a hardware accessed variable,
but they were shortly thereafter overwritten by the send_asq_command
call with a non-NULL third argument (buffer) with correctly formatted
data.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: minor clean up

Use INLINE macro for better cross-platform code management.

Clean up some unnecessary logic jumping and drop a variable.

There was one more __FUNCTION__ reference that wasn't needed.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add new link status defines

Add the new Port link status bit and rename the link status to function
link status.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: explicitly assign index for VSI type

The change is to explicitly assign enum index for each VSI type
so that PF and VF always reference to the same VSI type even if the
enum lists are different.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add more stats

This will help us avoid a whole bunch of log messages when the driver
is running.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: update Flex-10 capabilities

The Flex10 device/function capability has been upgraded to revision 2
to include information needed to support Flex-10 DCC and DCI
configurations. This patch adds new fields to the i40e_hw_capabilities
structure and updates i40e_parse_discover_capabilities functions to
extract them from the AQ response. Naming convention has changed to use
flex10 mode instead of existing mfp_mode_1.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: store CEE DCBX config

This patch adds capability to query and store the CEE DCBX DesiredCfg
and RemoteCfg data from the LLDP MIB.
Added new member "desired_dcbx_config" in the i40e_hw data structure
to hold CEE only DesiredCfg data.

Store the CEE TLV status returned by firmware to allow drivers to dump that
for debug purposes.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add PHY capabilities

Remove unused members in the PHY structure and add a new member to store
all the capabilities the PHY has as reported by the FW. This information will
help us determine what speeds the device is capable of when link is
down.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: prepare local LLDP MIB in TLV

This patch prepares the LLDP MIB in IEEE TLV format based on
the local dcb config.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add parsing for CEE DCBX TLVs

This patch adds parsing for CEE DCBX TLVs from the LLDP MIB.

While the driver gets the DCB CEE operational configuration from Firmware
using the "Get CEE DCBX Oper Config" AQ command there is a need to get
the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for
debug and other application purposes.

Also gets rid of unused locals variables.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: use bit shift macros

Use macros for abstracting (1 << foo) to BIT(foo)
and (1ULL << foo64) to BIT_ULL(foo64) in order to match
better with linux kernel requirements.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: increase PF reset max loop limit

With latest LANconf and NVMupdate tools, pf_reset failed due to Firmware not
being ready, so this patch increases I40E_PF_RESET_WAIT_COUNT to 200, using
original value defined for A0 silicon, in order to make sure that FW is ready.

Test result indicates that firmware became ready at the loop count of 114.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: wrap the register definitions for PF and VF

There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch defines a new #define PF_DRIVER.
All the PF specific register definitions are wrapped in it.

The drivers will have to be updated to use the define in the PF
driver builds. Makes for a very short register.h for VF drivers.

Also fixes the code where PF driver register fields were getting used for
VF driver.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add VF capabilities to virtual channel interface

To prepare for the changes coming up in the X722 device and future
devices, the virtual channel interface has to change slightly. The VF
driver can now report what its capable of supporting, which then informs
the PF driver when it sends the configuration information back to the
VF.

A 1.1 VF driver on a 1.0 PF driver should not send its capabilities.
Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect
or depend upon receiving the VF capabilities.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add OEM post update

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add debug dump internal data

This patch adds support for "Debug Dump Internal Data" AQ command.
It is used to dump internal firmware or hardware data for debug
purposes.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add workaround to drop all flow control frames

This patch adds a workaround to drop any flow control frames from being
transmitted from any VSI. FW can still send Flow control frames if Flow
control is enabled.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add promiscuous on VLAN

NFV use cases require the ability to steer packets to VSIs by VLAN tag
alone while being in promiscuous mode for multicast and unicast MAC
addresses. These two new functions support that ability.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: allow per-device FW API version

Allow for unique FW API versions for different HW

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: get OEM version

This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: handle AQ timeout when releasing NVM

There are some rare cases where the release resource call will return an
admin Q timeout. In these cases the code needs to try to release the
resource again until it succeeds or it times out.

Also add little endian conversion for checksum

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add commands for NVM update

Add a new GetStatus command so that the NVM update tool can query
the current status instead of doing fake write requests to probe for
readiness.
Add a facility to run AQ commands through the nvmupdate utility in order
to allow the update tools to interact with the FW and do special
commands needed for updates and configuration changes.
Add a facility to recover the result of a previously run AQ command.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add wait states to NVM state machine

This adds wait states to the NVM update state machine to signify when
waiting for an update operation to finish, whether we're in the middle
of a set of Write operations, or we're now idle but waiting.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add Tx scheduling related AQ commands

This patch adds support for AQ commands related to Tx scheduling.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: save AQ write back descriptor

Add the ability to save the AdminQ write back descriptor. If the writeback
descriptor buffer was previously created, this gives it to the AQ command
request to be used to save the results.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: grab AQ spinlocks before clearing registers

Make sure we have the spinlocks before we clear the ARQ and ASQ management
registers. Also, widen the locked portion and make a sanity check earlier
in the send function to be sure we're working with safe register values.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: save link module type

Add a module_types variable to the link_info struct to save the module
information from get_phy_capabilities. This information can be used to
determine which speeds the module supports.

Also add a new function update_link_info which updates the module_types
parameter and then calls get_link_info. This function should be called
in place of get_link_info so that the module_types variable stays
up-to-date with the rest of the link information.

Also rework the function get_link_status to allow caller to get all
return values in the call chain bubbled back to the source, which keeps
information about failures from being lost.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: update AQ command header

Update the admin queue command header for the Fortville SW 4 Release. As
part of this release the minor FW API version number is bumped to 4 so
that the FW API version for the FVLSW4 release will now be 1.4.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: reformat AQ debug output

Replace sprintf with i40e_debug.
Pad the line out with zeros to get to 16 bytes.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: fix error code conversion type

The error code sent into i40e_aq_rc_to_posix() are signed values, so we
really need to treat them as such.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add error status decoding

Add status value to string decoding routines to be used in error reporting
in order to give more readable error messages rather than bare error
numbers. This decodes both the i40e_status and the AQ error codes.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: add new device id for 20Gb and Fort pond

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

i40e/base: move device ids into a separate file

Due to desires to write userland drivers such as for DPDK support, and
other requests, without needing the rest of the include files, the device
ids are pulled out into a standalone file.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>

ethdev: remove old flow director API

Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
  - rte_eth_dev_fdir_add_perfect_filter;
  - rte_eth_dev_fdir_add_signature_filter;
  - rte_eth_dev_fdir_get_infos;
  - rte_eth_dev_fdir_remove_perfect_filter;
  - rte_eth_dev_fdir_remove_signature_filter;
  - rte_eth_dev_fdir_set_masks;
  - rte_eth_dev_fdir_update_perfect_filter;
  - rte_eth_dev_fdir_update_signature_filter;

The library version was already incremented in a previous patch.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

enic: remove #ident lines

This patch removes the #ident strings at the beginning of the source files.

Signed-off-by: Sujith Sankar <ssujith@cisco.com>

vhost: inject only one interrupt for a batch of packets

In merge-able RX path, vhost injects interrupts to guest for each packet.
This should degrade performance a lot.
This patch fixes this issue by injecting one interrupt for a batch of packets.

Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>

vhost: fix wrong usage of eventfd_t

According to eventfd man page:

    typedef uint64_t eventfd_t;

    int eventfd_read(int fd, eventfd_t *value);
    int eventfd_write(int fd, eventfd_t value);

eventfd_t is defined for the second arg(value), but not for fd.

Here I redefine those fd fields to `int' type, which also removes
the redundant (int) cast. And as the man page stated, we should
cast 1 to eventfd_t type for eventfd_write().

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>

vhost: get rid of duplicate code

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>

vhost: fix typo

_det => _dev

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>

vhost: remove extra semicolon

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>

doc: update release notes

Update the DPDK 2.2 release notes with recent fixes:

  9db649 eal/linux: fix epoll timeout
  d49e0f hash: fix memory allocation of cuckoo key table
  7fcd13 ixgbe: fix X550 DCB
  5e73f4 ixgbe: remove burst size restriction of vector Rx
  7e01e3 i40e: fix base driver allocation when not using first numa node
  d53364 vhost: fix qemu shutdown

The order of sections (and inside) is inspired from MAINTAINERS file.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

vhost: build eventfd_link module against specified kernel

The vHost eventlink driver is a kernel module that requires a kernel
source/build directory to build the ko. Convert the fixed kernel build
directory specifier to one which may be user specified on the command-line.

Signed-off-by: Aaron Conole <aconole@redhat.com>

vhost: fix qemu shutdown

This patch originates from the patch:
"Patch for Qemu wrapper for US-VHost to ensure Qemu process ends when
VM is shutdown", http://dpdk.org/ml/archives/dev/2014-June/003606.html

Also update the vhost sample guide doc.

Signed-off-by: Claire Murphy <claire.k.murphy@intel.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>

doc: fix vhost sample parameter

This commit removes the dev-index, so update the doc for this change:

Fixes: 17b8320a3e11 ("vhost: remove index parameter")

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>

doc: add guideline for updating release notes

From version 2.2 of DPDK onwards patchsets should include
updates to the Release Notes for additions, fixes and
changes.

Add guideline on what to update in the Release Notes to the
Documentation Contribution guidelines.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

i40e: fix base driver allocation when not using first numa node

Seen by code review.

If dpdk is run with memory only available on a non-0 socket, then i40e pmd
refuses to initialize ports as this pmd requires some memory on socket 0.
Fix this by setting socket to SOCKET_ID_ANY, so that allocations happen on
the caller socket.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>

ixgbe: remove burst size restriction of vector Rx

On receive side, the burst size now floor aligns to RTE_IXGBE_DESCS_PER_LOOP
power of 2. According to this rule, the burst size less than 4 still won't
receive anything.
(Before this change, the burst size less than 32 can't receive anything.)
_recv_*_pkts_vec returns no more than 32(RTE_IXGBE_RXQ_REARM_THRESH) packets.

On transmit side, the max burst size no longer bind with a constant, however
it still requires to check the cross tx_rs_thresh violation.

There's no obvious performance drop found on both recv_pkts_vec
and recv_scattered_pkts_vec on burst size 32.

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

ixgbe: fix X550 DCB

There's a DCB issue on x550. For 8 TCs, if a packet with user priority 6
or 7 is injected to the NIC, then the NIC will put 3 packets into the
queue. There's also a similar issue for 4 TCs.
The root cause is RXPBSIZE is not right. RXPBSIZE of x550 is 384. It's
different from other 10G NICs. We need to set the RXPBSIZE according to
the NIC type.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

hash: fix memory allocation of cuckoo key table

When calculating the size for the table which allocates
the keys, size was calculated wrongly from multiplying
two 32-bit variables, resulting on a 32-bit number,
before casting to 64-bit, so maximum size was 4G.

Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

eal/linux: fix epoll timeout

Function rte_epoll_wait should return when underlying call
to epoll_wait times out.

Signed-off-by: Robert Sanford <rsanford@akamai.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>

app/test: replace x86 fence by multi arch function

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

app/test: fix needless build dependency on x86

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

sched: remove unused inclusion of intrinsics

SSSE3 intrinsics not used in rte_bitmap.h

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

doc: fix ethertype filter example in testpmd guide

The two examples of ethertype_filter in testpmd documentation
were missing the mac address field, so the example was incorrect.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

version: 2.2.0-rc0

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

hash: remove deprecated function and macros

The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.

RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.

The library version number is incremented.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

enic: use appropriate key length in hash table

RTE_HASH_KEY_LENGTH_MAX was deprecated, and the hash table
actually is hosting bigger keys than that size, so key length
has been increased to properly allocate all keys.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>

ring: remove deprecated functions

These were deprecated in 2.0 so remove them from 2.2.
The library version is incremented.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

kni: remove deprecated functions

These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

acl: remove old API

The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

lpm: remove deprecated field

The library version is incremented.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

mem: remove dummy malloc library

The malloc library is now part of the EAL.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

eal: remove deprecated function

The function rte_eal_pci_close_one() was renamed rte_eal_pci_detach().

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David Marchand <david.marchand@6wind.com>

ethdev: remove SCTP flow entries switch

The extended SCTP flow entries are now part of the standard API.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

mbuf: remove packet type from offload flags

The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

ethdev: remove Rx interrupt switch

The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

doc: init next release notes

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

version: 2.1.0

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: add mlx4 release notes for version 2.1

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
[Thomas: merged with new release notes style]
Acked-by: John McNamara <john.mcnamara@intel.com>

doc: add missing release notes for mlx4 availability in 2.0

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

doc: update release notes for version 2.1

Added release notes for the DPDK R2.1 release.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
[Thomas: small fixes]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

app/test: initialize table parameters

In table_autotest, the structures containing the parameters
to create the tables were not initialized, and therefore,
some checks could fail and so the unit test.

Also, due to this initialization, one of the tests that was
checking if the table was improperly initialized has been
removed, as it is not needed anymore (duplicated)

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

app/test: fix table alignment check

In commit: 1129992baa61d72c5 checking for offset alignment was removed.
Unit tests wasn't updated to reflect that change. This patch changes
checks with unaligned offsets to make tests pass.

Fixes: 1129992baa61 ("port: fix unaligned access to metadata")

Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>

eal: fix C++ app build

* Forward declaration of enum in C++ requires explicit underlying
type definitions.

* This fixes the issue at:
http://dpdk.org/ml/archives/dev/2015-April/017065.html

include/generic/rte_cpuflags.h:50:6:
error: use of enum ‘rte_cpu_flag_t’ without previous declaration
enum rte_cpu_flag_t;

include/generic/rte_cpuflags.h:55:6:
error: use of enum ‘cpu_register_t’ without previous declaration
enum cpu_register_t;

Signed-off-by: Joongi Kim <joongi@an.kaist.ac.kr>
[Thomas: fix extended to ppc and tile]

mempool: fix explicit cast to build C++ app

When DPDK is being compiled in C++ project using g++ then
'invalid conversion from' error appears. Added explicit
typecast on function return to get rid of the error.

Fixes: 6cf14ce4ce6c ("mempool: silence warning on pointer arithmetic")

Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mbuf: fix explicit cast to build C++ app

When DPDK is being compiled in C++ project using g++ then
'invalid conversion from' error appears. Added explicit
typecast on function return to get rid of the error.

Fixes: 7755baae8378 ("mbuf: silence warning on pointer arithmetic")

Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

doc: announce removal of LPM memory location

This field is deprecated for a long time and should be removed.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce removal of jhash2 function

Fixes: 7530c9eea7d9 ("hash: rename a jhash function")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce ring PMD functions removal

These functions are marked as deprecated for a long time:
61934c0956d4 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019253.html

Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce removal of kni functions using port id

These functions are marked as deprecated for a long time:
fbf895d44cfe ("kni: identify device by name")
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019254.html

Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce legacy 7-tuple acl rule removal

These functions are marked as deprecated for a long time.
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019255.html

Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce ABI change for pipeline library

Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>

doc: announce ABI change for table library

Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>