examples/dpdk_qat: minor change

Signed-off-by: Intel

examples/dpdk_qat: fix cross compile check

Signed-off-by: Intel

examples: work only on defined lcores

Signed-off-by: Intel

examples: time fixes

Signed-off-by: Intel

examples: use global RTE_MAX_ETHPORTS

Signed-off-by: Intel

examples: numa updates

Signed-off-by: Intel

app/testpmd: update csumonly

Signed-off-by: Intel

app: fix build with GCC 4.8

GCC 4.8 was producing this error:
argument to ‘sizeof’ in ‘strncmp’ call is the same expression as the
second source; did you mean to provide an explicit length?
[-Werror=sizeof-pointer-memaccess]

Signed-off-by: Intel

app: only use one thread to run autotests

Signed-off-by: Intel

app: fix build when some libs are disabled

Signed-off-by: Intel

app: rework ring tests

Signed-off-by: Intel

app: add a test on mbuf alignment

Signed-off-by: Intel

app: add tests on --syslog, --no-shconf and --huge-dir flags

Signed-off-by: Intel

app: add some tests

Signed-off-by: Intel

app: remove pmac from Makefile

Signed-off-by: Intel

app: fix Makefile

Signed-off-by: Intel

kni: disable ETHTOOL_GRXRINGS

Signed-off-by: Intel

kni: fix build with kernel 3.8

- timecompare (used for hardware timestamping) has been removed.
(see Linux commit 65f8f9a1c1db831e5159e3e3e50912d1f214cd0c)
Simply disable HW_TIME_STAMP feature because it is not used by KNI.

- annotations __devinit and __devexit have been removed.
(see Linux commit 54b956b903607f8f8878754dd4352da6a54a1da2)

Signed-off-by: Intel

kni: fix multi-process support

Signed-off-by: Intel

ixgbe: force phy power up/down

Signed-off-by: Intel

igb: force phy power up/down

Signed-off-by: Intel

ixgbe: update VMDq/DCB support

Signed-off-by: Intel

igb: update VMDq/DCB support

Signed-off-by: Intel

ethdev: update VMDq/DCB support

Signed-off-by: Intel

ethdev: set VMDq pool when adding mac address

Signed-off-by: Intel

ixgbe: add PF support

Signed-off-by: Intel

igb: add PF support

Signed-off-by: Intel

ethdev: add PF support

Signed-off-by: Intel

ixgbe: support dual vlan

Signed-off-by: Intel

igb: fix max RX packet size and support dual VLAN

When in 'normal' mode, hardware is designed to receive up to 1522 bytes.
When in 'jumbo' mode, RLPML register must be updated so that hardware accepts
a 802.1q vlan header. If dual vlan is enabled, then a second vlan header is
expected, so update RLPML register according to dual vlan support.

Signed-off-by: Intel

ixgbe: retrieve RX available descriptors

Signed-off-by: Intel

igb: retrieve RX available descriptors

Signed-off-by: Intel

e1000: retrieve RX available descriptors

Signed-off-by: Intel

ethdev: retrieve RX available descriptors

Signed-off-by: Intel

ixgbe: RSS RETA configuration

Signed-off-by: Intel

igb: RSS RETA configuration

Signed-off-by: Intel

ethdev: RSS RETA configuration

Signed-off-by: Intel

ixgbe: allocate structures on numa_node

Signed-off-by: Intel

ethdev: store numa_node per device

Signed-off-by: Intel

ixgbe: allow unsupported SFP

Add RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP build option

Signed-off-by: Intel

ixgbe: force inlining

Signed-off-by: Intel

ixgbe: log tx code path

Signed-off-by: Intel

e1000: move workaround for wthresh on 82576 at wrong place

The workaround is moved in e1000em code but 82576 is an igb NIC.
It breaks the fix of the commit 7e9e49feea.

Signed-off-by: Intel <intel.com>

igb: workaround errata with wthresh on 82576

The 82576 has known issues which require the write threshold to be set to 1.
See:
http://download.intel.com/design/network/specupdt/82576_SPECUPDATE.pdf

If not then single packets will hang in transmit ring until more arrive.
Simple tests like ping will fail.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>

ethdev: more doxygen comments about fdir

Signed-off-by: Intel

pci: store numa_node per device

Signed-off-by: Intel

pci: configure SR-IOV with max_vfs

Signed-off-by: Intel

pci: fix probing blacklisted device with RTE_PCI_DRV_MULTIPLE flag

When blacklisting network adapters that share a PCI bus address with multiple
ports such as Mellanox ConnectX-3 (librte_pmd_mlx4), RTE applications
enter infinite loops while probing PCI devices.

This commit removes this probe on subsequent instances for blacklisted devices
that have RTE_PCI_DRV_MULTIPLE set.

Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

pci: don't unbind resources on exit

unbind operations must be done before starting eal application

Signed-off-by: Intel

pci: rework interrupt handling

Signed-off-by: Intel <intel.com>

pci: support multiple PCI regions per device

Need to change PCI code to support multiple I/O regions on a single device.
Some devices like VMXNET3 have multiple PCI memory regions, and some
have none.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Intel

mbuf: force inlining

Signed-off-by: Intel

mem: force inlining

Signed-off-by: Intel

mem: remove RLIMIT_NOFILE update

Memory init won't try to increase its RLIMIT_NOFILE limit, this must be done
prior to starting it.

Signed-off-by: Intel

mem: find most little element from heap

Allocations now return the most little element from heap matching size
constraint instead of the first one available.

Signed-off-by: Intel

ring: optimisations

Signed-off-by: Intel

timer: add a rte_pause in a tight loop

Signed-off-by: Intel

timer: prefer TSC to HPET

Signed-off-by: Intel

timer: optimize for empty case

In many application there are no timers queued, and the call to
rte_timer_managecan be optimized in that case avoid reading HPET and
lock overhead.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>

timer: option --vmware-tsc-map for VMware guest

The VMWare TSC mapping uses a hook to RDPMC to read the physical TSC
in the case of VMware ESXi.

Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Jean-Mickael Guerin <jmg@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Introduce new option --vmware-tsc-map, ignored if
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is not set.

Default is CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y.

if CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is set:
    rte_rdtsc() selects at runtime between Vmware mapping of
    TSC or native TSC
else
    rte_rdtsc() always uses native rdtsc.

When running DPDK on VMware guest, enable --vmware-tsc-map to
read the physical TSC.
Caution: ESXi should pass monitor_control.pseudo_perfctr = TRUE
othewise it results in general protection fault.

Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

hash: jhash optimisation

Signed-off-by: Intel

hash: fix for multi-process apps

Signed-off-by: Intel

sched: initial import

Signed-off-by: Intel

meter: initial import

Signed-off-by: Intel

power: initial import

Signed-off-by: Intel

lpm: add IPv6 support

Signed-off-by: Intel

log: optimize log/panic with attribute cold

Both logging and calls to panic are never in the critical path.
Use the GCC attribute cold to mark these functions as cold,
which generates more optimised code.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>

log: get full path as syslog id

It partially reverts commit 04210699eee.

Signed-off-by: Intel <intel.com>

log: add ability to override syslog parameters

By default, DPDK based applications would only allow logging
to syslog as "rte", DAEMON; but for any production application more
control is desired to allow using actual application name and
overriding the facility.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>

eal: cosmetic changes

Signed-off-by: Intel

eal: add application usage hook

Signed-off-by: Intel

eal: memory barriers use intrinsic functions

Signed-off-by: Intel

eal: use intrinsic functions from compiler

RTE_FORCE_INTRINSICS makes it possible to force use of intrinsic
functions (defaults to n).

Signed-off-by: Intel

lib: add rte_hexdump and remove duplicated code

Signed-off-by: Intel

lib: fix various compilation warnings

Signed-off-by: Intel

lib: 32/64-bit cleanups

Signed-off-by: Intel

config: change max lcore to 64

Signed-off-by: Intel

app/testpmd: cosmetic changes

Signed-off-by: Intel

doc: fix file format (dos to unix)

Signed-off-by: Intel

file mode changes

Signed-off-by: Intel

set version to 1.3.1

Signed-off-by: Intel

update copyright date to 2013

Signed-off-by: Intel

examples: various changes

Signed-off-by: Intel

app: various changes

Signed-off-by: Intel

app: fix unused values

Fix warnings of type "Value stored to 'xxx' is never read".

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

app: fix volatile read for GCC >= 4.6

When a memory address must be read, for instance a [mapped] PCI register,
the read value is assigned to a local variable that is not used after,
as for instance:
    x = *((uint8_t *) mem_addr);

Such instructions do not compile with gcc 4.6.
The fix consists in adding the "volatile" attribute to the accessed data type
and to not assign the read value:
    *((volatile uint8_t *) mem_addr);

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

app/testpmd: fix compliance with __rte_mbuf_sanity_check()

Build mbuf and lists of mbufs in a way compliant with the checks performed
by the function __rte_mbuf_sanity_check() when CONFIG_RTE_LIBRTE_MBUF_DEBUG=y

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

app/testpmd: fix config crash

A chained topology must always have an increment of 1.
Here, it was 2 if ports number is even.

Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

lib: minor changes

Signed-off-by: Intel

lib: fix non-C99 macros definitions in exported headers

The original definitions prevent external programs/libraries from compiling
without warnings when using these headers and -std=gnu99 (relaxed C99 mode).

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>

lib: fix uninitialized value

Fix warning "The left expression of the compound assignment
is an uninitialized value".

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

lib: fix uninitialized variables

Fix compilation errors caused by uninitialized variables.

Signed-off-by: Krzysztof Witek <krzysztof.witek@6wind.com>
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

lib: fix unused values

Fix warnings of type "Value stored to 'xxx' is never read".

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

kni: various changes

Signed-off-by: Intel

kni: disable IGB_DCA

Signed-off-by: Intel

kni: fix disabling

Signed-off-by: Intel

kni: fix build with kernel < 2.6.34

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

igb_uio: fix build with kernel >= 3.8

__devinit has been removed in linux commit 54b956b903
("Remove __dev* markings from init.h", 3.8-rc4).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

igb: fix RX for Springville (i210)

Signed-off-by: Intel

pci: allow drivers to be bound several times to the same PCI device

Drivers with the flag RTE_PCI_DRV_MULTIPLE enabled will be bound several
times to the same device until they return an error.

These drivers must internally keep track of each device state in order for
this to work reliably.

This flag currently required for Ethernet adapters with several physical
ports but a single address on the PCI bus.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>