dpdk.git
9 years agoixgbe: enable Rx queue interrupts for PF and VF
Cunming Liang [Mon, 20 Jul 2015 03:02:27 +0000 (11:02 +0800)]
ixgbe: enable Rx queue interrupts for PF and VF

The patch does below things for ixgbe PF and VF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoethdev: add Rx interrupt control functions
Cunming Liang [Mon, 20 Jul 2015 03:02:26 +0000 (11:02 +0800)]
ethdev: add Rx interrupt control functions

The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: add interrupt API for drivers
Cunming Liang [Mon, 20 Jul 2015 03:02:22 +0000 (11:02 +0800)]
eal/linux: add interrupt API for drivers

The patch exposes intr event fd create and release for PMD.
The device driver can assign the number of event associated with interrupt vector.
It also provides misc functions to check 1) allows other slowpath intr(e.g. lsc);
2) intr event on fastpath is enabled or not.

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: fix link status interrupt with uio_pci_generic
Cunming Liang [Mon, 20 Jul 2015 03:02:23 +0000 (11:02 +0800)]
eal/linux: fix link status interrupt with uio_pci_generic

The intr handle type(RTE_INTR_HANDLE_UIO_INTX) was introduced by UIO pci generic.
When turning on the lsc interrupt, it complains fd read error.
The patch uses the correct read size in the case of RTE_INTR_HANDLE_UIO_INTX.

Fixes: 3f313bef3467 ("eal/linux: fix irq handling with igb_uio")

Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: map eventfd to vfio MSI-X vector
Cunming Liang [Mon, 20 Jul 2015 03:02:21 +0000 (11:02 +0800)]
eal/linux: map eventfd to vfio MSI-X vector

The patch maps each of the eventfd to the interrupt vector of VFIO MSI-X.

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: fix comments on vfio MSI
Cunming Liang [Mon, 20 Jul 2015 03:02:20 +0000 (11:02 +0800)]
eal/linux: fix comments on vfio MSI

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: add Rx interrupt control function
Cunming Liang [Mon, 20 Jul 2015 03:02:19 +0000 (11:02 +0800)]
eal/linux: add Rx interrupt control function

The patch adds 'rte_intr_rx_ctl' to add or delete interrupt vector
events monitor on specified epoll instance.

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: add epoll wrappers
Cunming Liang [Mon, 20 Jul 2015 03:02:18 +0000 (11:02 +0800)]
eal/linux: add epoll wrappers

The patch adds 'rte_epoll_wait' and 'rte_epoll_ctl' for async event wakeup.
It defines 'struct rte_epoll_event' as the event param.
When the event fds add to a specified epoll instance, 'eptrs' will hold
the rte_epoll_event object pointer.
The 'op' uses the same enum as epoll_wait/ctl does.
The epoll event support to carry a raw user data and to register a callback
which is executed during wakeup.

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/linux: add interrupt vectors
Cunming Liang [Mon, 20 Jul 2015 03:02:17 +0000 (11:02 +0800)]
eal/linux: add interrupt vectors

The patch adds interrupt vectors support in rte_intr_handle.
'vec_en' is set when interrupt vectors are detected and associated
event fds are set. Those event fds are stored in efds[].
'intr_vec' is reserved for device driver to initialize the vector
mapping table.

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agoeal/bsd: fix inappropriate header guards
Cunming Liang [Mon, 20 Jul 2015 03:02:25 +0000 (11:02 +0800)]
eal/bsd: fix inappropriate header guards

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
9 years agodoc: add bonding hotplug example in testpmd guide
Bernard Iremonger [Mon, 27 Jul 2015 15:54:37 +0000 (16:54 +0100)]
doc: add bonding hotplug example in testpmd guide

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
9 years agoapp/testpmd: fix bonding start
Bernard Iremonger [Mon, 27 Jul 2015 15:54:35 +0000 (16:54 +0100)]
app/testpmd: fix bonding start

When the bonded port is started it also starts the slave port,
but the slave port status is not set. A slave_flag has been
added to struct rte_port to resolve this issue.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
9 years agobonding: free queue memory when closing
Bernard Iremonger [Mon, 27 Jul 2015 15:54:36 +0000 (16:54 +0100)]
bonding: free queue memory when closing

Add function bond_ethdev_free_queues() and call from the
bond_ethdev_close() function.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
9 years agobonding: support port hotplug
Bernard Iremonger [Mon, 27 Jul 2015 15:54:34 +0000 (16:54 +0100)]
bonding: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the link bonding pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
9 years agoexamples/l3fwd: increase lookup burst size to 8
Pablo de Lara [Thu, 23 Jul 2015 16:12:07 +0000 (17:12 +0100)]
examples/l3fwd: increase lookup burst size to 8

With the new hash implementation, the minimum lookup burst size
to get good performance is 8, since its internal pipeline
consists of 4 stages of 2 entries each, so to avoid
duplication, burst size should be 8 or more entries.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
9 years agoexamples/ip_pipeline: fix cpu cores parsing
Maciej Gajdzica [Tue, 21 Jul 2015 14:39:00 +0000 (16:39 +0200)]
examples/ip_pipeline: fix cpu cores parsing

This patch fixes parsing value of core variable in pipeline config.
Before not every combination of cores (c), sockets (s) and
hyperthreading (h) was parsed correctly.

Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
9 years agoixgbe: fix Rx queue reset
Konstantin Ananyev [Mon, 27 Jul 2015 13:28:16 +0000 (14:28 +0100)]
ixgbe: fix Rx queue reset

As Steve pointed out, the commit 11b220c6498d ("ixgbe: fix release queue mbufs")
is not complete.
As at queue stop we don't reset vector related rx queue fields to their
initial values.

Fixes: c95584dc2b18 ("ixgbe: new vectorized functions for Rx/Tx")

Reported-by: Cunming Liang <cunming.liang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoigb_uio: fix build
Jan Viktorin [Fri, 24 Jul 2015 17:11:44 +0000 (19:11 +0200)]
igb_uio: fix build

The missing header prevents to build with linux v3.18.

The problem is with kzalloc and kfree which are undefined in the igb_uio
driver.

HOSTCC="/usr/bin/gcc" HOSTCFLAGS="" ARCH=arm
RTE_TARGET=arm-armv7-a-linuxapp-gcc
CROSS=arm-none-linux-gnueabi-
lib/librte_eal/linuxapp/igb_uio/igb_uio.c:
error: implicit declaration of function 'kzalloc'
error: implicit declaration of function 'kfree'

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
9 years agofm10k: expose Tx checksum capability
Chen Jing D(Mark) [Mon, 27 Jul 2015 07:56:57 +0000 (15:56 +0800)]
fm10k: expose Tx checksum capability

fm10k has the capability to do checksum offload in TX side. This
change will expose the capability to application in infos_get
function.

Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
9 years agoconfig: fix ABI breakage in BSD build
Thomas Monjalon [Mon, 27 Jul 2015 02:01:57 +0000 (04:01 +0200)]
config: fix ABI breakage in BSD build

When reverting the max queues per port to fix an ABI breakage,
the BSD config was forgotten.

Fixes: 94c6cba001ae ("config: revert the max queues per port to 256")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoeal: fix tsc frequency
Sergio Gonzalez Monroy [Mon, 27 Jul 2015 12:17:55 +0000 (13:17 +0100)]
eal: fix tsc frequency

Fix error where TSC freq is 0.

The logical OR operator evaluates to 1 if any of its operands is
different than 0.

Error showed later while initializing PMD:
EAL: TSC frequency is ~0 KHz
<snip>
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30
EAL: Error - exiting with code: 1
  Cause: Requested device 0000:84:00.0 cannot be used

Fixes: 040cf8a41187 ("eal: deduplicate timer functions")

Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoring: support port hotplug
Bernard Iremonger [Tue, 7 Jul 2015 13:09:23 +0000 (14:09 +0100)]
ring: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the ring pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.ruchardson@intel.com>
9 years agobnx2x: enable PMD build
Stephen Hemminger [Mon, 20 Jul 2015 16:33:20 +0000 (09:33 -0700)]
bnx2x: enable PMD build

This is build infrastructure changes for bnx2x driver.
 - enable BNX2X poll mode driver in default config.
 - add it to mk
 - put entry in MAINTAINERS

Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
9 years agobnx2x: driver support routines
Stephen Hemminger [Mon, 20 Jul 2015 16:33:19 +0000 (09:33 -0700)]
bnx2x: driver support routines

More code for the Broadcom/Qlogic NetExtreme II poll mode driver.
Split into pieces for review and not to overwhelm mailers.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
9 years agobnx2x: driver core
Stephen Hemminger [Mon, 20 Jul 2015 16:33:18 +0000 (09:33 -0700)]
bnx2x: driver core

This is the first of several parts for a new driver supporting
Broadcom/Qlogic NetXtremeII 10 gigabit devices.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
9 years agoeal: provide functions to access PCI config
Stephen Hemminger [Mon, 20 Jul 2015 16:33:17 +0000 (09:33 -0700)]
eal: provide functions to access PCI config

Some drivers need ability to access PCI config (for example for power
management). This adds an abstraction to do this for both Linux
and BSD.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
9 years agoeal: deduplicate memory initialization
Ravi Kerur [Sat, 25 Jul 2015 19:36:29 +0000 (12:36 -0700)]
eal: deduplicate memory initialization

Move common functions from BSD/Linux to eal_common_memory.c file.
BSD uses contigmem kernel module and Linux uses /proc/self/pagemap file.

Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoeal: deduplicate timer functions
Ravi Kerur [Sat, 25 Jul 2015 19:36:28 +0000 (12:36 -0700)]
eal: deduplicate timer functions

Move common functions from BSD/Linux to eal_common_timer.c.
BSD uses sysctl and Linux uses CLOCK_MONOTIC_RAW to calibrate TSC.
HPET is specific to Linux and not integrated in the common init.

Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoeal: deduplicate lcore initialization
Ravi Kerur [Sat, 25 Jul 2015 19:36:27 +0000 (12:36 -0700)]
eal: deduplicate lcore initialization

Implement cpu_detected() for BSD.
Move common function in eal_lcore.c to eal_common_lcore.c file.

Signed-off-by: Ravi Kerur <rkerur@gmail.com>
9 years agoeal: remove useless PCI id header inclusions
David Marchand [Thu, 23 Jul 2015 07:15:32 +0000 (09:15 +0200)]
eal: remove useless PCI id header inclusions

Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: move inclusion used by ixgbe bypass]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoeal: remove dependency on drivers
David Marchand [Thu, 23 Jul 2015 07:15:31 +0000 (09:15 +0200)]
eal: remove dependency on drivers

There is no reason why eal should depend on drivers.
Remove remaining (unused) references.

Signed-off-by: David Marchand <david.marchand@6wind.com>
9 years agombuf: fix tunnel flags check
Thomas Monjalon [Wed, 15 Jul 2015 23:50:12 +0000 (01:50 +0200)]
mbuf: fix tunnel flags check

A packet is tunnelled if the tunnel type is identified or if it has
an inner part.

Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.

Fixes: f295a00a2b44 ("mbuf: add definitions of unified packet types")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
9 years agomempool: fix trailer address
Yuichi Nakai [Wed, 22 Jul 2015 13:57:00 +0000 (22:57 +0900)]
mempool: fix trailer address

__mempool_get_trailer() calculated header's address.
The address of trailer should set after element area.
This patch fixes this calculating.

Fixes: 97e7e685bfcd ("mempool: add structure for object trailers")

Signed-off-by: Yuichi Nakai <xoxyuxu@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoethdev: fix C linkage type of latest functions
Konstantin Ananyev [Fri, 24 Jul 2015 15:18:25 +0000 (16:18 +0100)]
ethdev: fix C linkage type of latest functions

Move #ifdef __cplusplus to the end of the file.

Fixes: 64b7acd861b1 ("ethdev: add multicast address filtering")

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoe1000: enable jumbo frame for 82583V device
Klaus Degner [Wed, 22 Jul 2015 09:07:43 +0000 (11:07 +0200)]
e1000: enable jumbo frame for 82583V device

This patch enables jumbo frame support for the 82583V.
It has been tested ( rx and tx ) with real HW.

Signed-off-by: Klaus Degner <kd@allegro-packets.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
9 years agoixgbe: fix check for split packets
Bruce Richardson [Wed, 22 Jul 2015 09:13:30 +0000 (10:13 +0100)]
ixgbe: fix check for split packets

The check for split packets to be reassembled in the vector ixgbe PMD
was incorrectly only checking the first 16 elements of the array instead
of all 32. This is fixed by changing the uint32_t values to be uint64_t
instead.

Fixes: cf4b4708a88a ("ixgbe: improve slow-path perf with vector scattered Rx")

Reported-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
9 years agoixgbe: remove Rx bulk allocation option
Pablo de Lara [Thu, 23 Jul 2015 14:29:41 +0000 (15:29 +0100)]
ixgbe: remove Rx bulk allocation option

RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC config option is not really
necessary, as bulk alloc rx function can be used anyway, as long as the
necessary conditions are satisfied, which are checked already
in the library.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoixgbe: remove awkward typecasts
Konstantin Ananyev [Fri, 24 Jul 2015 13:58:15 +0000 (14:58 +0100)]
ixgbe: remove awkward typecasts

The vector/SSE pmd used a different element type for the tx queue sw_ring
entries. This led to lots of typecasts in the code which required specific
use of bracketing, leading to subtle errors.
For example, in the original code:
txe = (struct ixgbe_tx_entry_v *)&txq->sw_ring[i];
instead needs to be written as:
txe = &((struct ixgbe_tx_entry_v *)txq->sw_ring)[i];

We can eliminate this problem, by having two software ring pointers in the
structure for the two different element types.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoixgbe: rename Tx queue release function
Konstantin Ananyev [Fri, 24 Jul 2015 13:58:14 +0000 (14:58 +0100)]
ixgbe: rename Tx queue release function

The function inside the vector/SSE poll-mode driver for releasing
the mbufs on the TX queues had the same name as another function
inside the regular PMD. To keep consistency and avoid confusion,
rename the vector PMD version to have a "_vec" suffix.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoixgbe: fix release queue mbufs
Konstantin Ananyev [Fri, 24 Jul 2015 13:58:13 +0000 (14:58 +0100)]
ixgbe: fix release queue mbufs

The calculations of what mbufs were valid in the RX and TX queues were
incorrect when freeing the mbufs for the vector PMD. This led to crashes
due to invalid reference counts when mbuf debugging was turned on, and
possibly other more subtle problems (such as mbufs being freed when in use)
in other cases.

To fix this, the following changes were made:
* correct counts and post-loop values in the TX release function for the
  vector code.
* create a new separate RX release function for the RX vector code, since the
  tracking of what mbufs are valid or not is different for that code path

Fixes: c95584dc2b18 ("ixgbe: new vectorized functions for Rx/Tx")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoixgbe: revert mbuf refcnt check when clearing a ring
Konstantin Ananyev [Fri, 24 Jul 2015 13:58:11 +0000 (14:58 +0100)]
ixgbe: revert mbuf refcnt check when clearing a ring

The bug fix was incorrect as it did not take account of the fact that
the mbufs that were previously freed may have since be re-allocated.

Reverts: b35d0d80f0a8 ("ixgbe: check mbuf refcnt when clearing a ring")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoixgbe: fix comments on Rx queue fields
Konstantin Ananyev [Fri, 24 Jul 2015 13:58:12 +0000 (14:58 +0100)]
ixgbe: fix comments on Rx queue fields

The two fields for vector RX rearming in the rx queue structure were
incorrectly labelled. Switching the comments on each around makes things
clearer.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoixgbe: fix Rx error stats
Maryam Tahhan [Mon, 20 Jul 2015 12:28:29 +0000 (13:28 +0100)]
ixgbe: fix Rx error stats

Bug fix to remove (rxnfgpc - hw_stats->gprc) which does not account
for phy errors.
hw_stats->gprc is the Number of good (non-erred) Rx packets (from the
network) that pass L2 filtering and has a legal length as defined by
LongPacketEnable. While rxnfgpc is the Number of good (non-erred with
legal length) Rx packets (from the network) regardless of packet
filtering and receive enablement. Thus hw_stats->gprc can be > rxnfgpc
and this calculation should be removed from the calculation of ierrors.
Validated with testpmd by sending packets to the interface without
forwarding enabled - packets should be dropped and the error counters
incremented.

Fixes: f6bf669b9900 ("ixgbe: account more Rx errors")

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Balazs Nemeth <balazs.nemeth@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
9 years agokni: remove needless casts
Stephen Hemminger [Thu, 16 Jul 2015 23:47:24 +0000 (16:47 -0700)]
kni: remove needless casts

This fixes cases in KNI where kernel allocation function return value
is needlessly casted.

Detected with coccinelle:
lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c:3181:25-28:
WARNING: casting value returned by memory allocation function to (u32 *) is useless.
lib/librte_eal/linuxapp/kni/kni_vhost.c:690:9-28:
WARNING: casting value returned by memory allocation function to (struct rte_kni_fifo *) is useless.
lib/librte_eal/linuxapp/kni/kni_vhost.c:684:13-27:
WARNING: casting value returned by memory allocation function to (struct sk_buff *) is useless

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agoethdev: fix crash if malloc of user callback fails
Stephen Hemminger [Thu, 16 Jul 2015 23:47:23 +0000 (16:47 -0700)]
ethdev: fix crash if malloc of user callback fails

Found by coccinelle script.
If rte_zmalloc() failed in rte_eth_dev_callback_register
then NULL pointer would be dereferenced.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
[Thomas: restore pointer comparison style]

9 years agocxgbe: update doc for FreeBSD support
Rahul Lakkireddy [Mon, 20 Jul 2015 17:31:37 +0000 (23:01 +0530)]
cxgbe: update doc for FreeBSD support

Update cxgbe documentation to include support for FreeBSD:
1. Add instructions on how to compile CXGBE PMD in FreeBSD.
2. Add instructions on how to flash firmware image on Chelsio T5 cards in
   FreeBSD.
3. Add sample application usage for FreeBSD.
4. Add an extra step to reload kernel module in Linux in order for the new
   firmware to be loaded.
5. Typo fixes.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
9 years agocxgbe: enable build on FreeBSD
Rahul Lakkireddy [Mon, 20 Jul 2015 17:31:36 +0000 (23:01 +0530)]
cxgbe: enable build on FreeBSD

Fix "MACRO redefined" and "function redefined" compilation errors in FreeBSD
by adding CXGBE prefix to them.  Also remove reference to a linux header
linux/if_ether.h and use DPDK macros directly.  Finally, enable CXGBE PMD
for FreeBSD.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
9 years agonic_uio: allow to bind any device
Rahul Lakkireddy [Mon, 20 Jul 2015 17:31:35 +0000 (23:01 +0530)]
nic_uio: allow to bind any device

nic_uio requires the pci ids to be present in rte_pci_dev_ids.h in order to
bind the devices to nic_uio.  However, it's better to remove this whitelist
of pci ids, and instead rely on hw.nic_uio.bdfs kenv parameter to allow
binding any device to nic_uio.

Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
9 years agofm10k: fix interrupt fault handling
Stephen Hemminger [Fri, 17 Jul 2015 00:33:22 +0000 (17:33 -0700)]
fm10k: fix interrupt fault handling

The fm10k driver was reading the interrupt cause register but then
using the interrupt mask register defines to look at the bits.
The result is that if a fault happens, the driver would never clear
the fault and would get into an infinite cycle of interrupts.

Note: I don't work for Intel or have the hardware manuals (probably
requires NDA anyway), but this looks logical and matches how the
known working Linux driver handles these bits.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
9 years agofm10k: remove useless code
Stephen Hemminger [Thu, 16 Jul 2015 22:05:17 +0000 (15:05 -0700)]
fm10k: remove useless code

The return in fm10k_dev_handle_fault has useless conditional
since it always returns 0 here.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
9 years agofm10k: fix missing newline in debug log
Stephen Hemminger [Thu, 16 Jul 2015 21:06:40 +0000 (14:06 -0700)]
fm10k: fix missing newline in debug log

If FM10K_DEBUG_DRIVER is enabled, then the log messages about
function entry are missing newline causing extremely long lines.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
9 years agoapp/testpmd: fix ieee1588 32-bit timestamp log
Pablo de Lara [Wed, 22 Jul 2015 08:06:48 +0000 (09:06 +0100)]
app/testpmd: fix ieee1588 32-bit timestamp log

In ieee1588fwd.c, timestamp.tv_sec is a time_t variable,
which is a long int, but it was being printed with PRIu64,
causing an issue on 32 bits.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
9 years agoixgbe: fix build with bulk alloc disabled
Pablo de Lara [Wed, 22 Jul 2015 09:50:11 +0000 (10:50 +0100)]
ixgbe: fix build with bulk alloc disabled

ixgbe_recv_pkts_lro uses field rx_free_trigger
in structure ixgbe_rx_queue, but that field is only defined
if IXGBE_RX_ALLOW_BULK_ALLOC is enabled, so even though
that field is not used when it is disabled,
compiler complains about it.
Therefore, the lines of code that use that field
have been ifdef.

Fixes: 8eecb329 ("ixgbe: add LRO support")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
9 years agohash: move struct field to keep ABI stable
Pablo de Lara [Tue, 21 Jul 2015 14:10:19 +0000 (15:10 +0100)]
hash: move struct field to keep ABI stable

In order to keep the ABI consistent with the old hash library,
hash_func_init_val field has been moved, so it remains
at the same offset as previously, since hash_func and
hash_func_init_val are fields accessed by the public function
rte_hash_hash and must keep the same offset as older versions.

Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
9 years agovirtio: small cleanups
Stephen Hemminger [Mon, 20 Jul 2015 18:40:46 +0000 (11:40 -0700)]
virtio: small cleanups

Some minor cleanups.
  * pass constant to virtio_dev_queue_setup
  * fix message on rx_queue_setup
  * get rid of extra double spaces

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
9 years agovirtio: fix queue size and number of descriptors
Stephen Hemminger [Mon, 20 Jul 2015 18:40:45 +0000 (11:40 -0700)]
virtio: fix queue size and number of descriptors

The virtual queue ring size and the number of slots actually usable
are separate parameters. In the most common environment (QEMU)
the virtual queue ring size is 256, but some environments the
ring maybe much larger.

The ring size comes from the host and the driver must use the
actual size passed.

The number of descriptors can be either zero to use the whole
available ring, or some value smaller. This is used to limit
the number of mbufs allocated for the receive ring. If more
descriptors are requested than available the size is silently
truncated.

Note: the ring size (from host) must be a power of two, but
the number of descriptors used can be any size from 1 to the
size of the virtual ring.

Fixes: d78deadae4dc ("virtio: fix ring size negotiation")

Reported-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
9 years agomalloc: fix combined lib build
Sergio Gonzalez Monroy [Tue, 21 Jul 2015 10:33:17 +0000 (11:33 +0100)]
malloc: fix combined lib build

Malloc was moved to the EAL and dummy malloc library was left
to not break apps that had a librte_malloc.so dependency.
Note that the dummy library will be removed in the next release.

When building a combined library, all objects are copied to the same
directory before creating the library itself.

There are a few issues:
 - CONFIG_RTE_LIBRTE_MALLOC is not a valid option anymore resulting
 in wrong syntax and a compilation failure. Fix it by replacing it
 with CONFIG_RTE_LIBRTE_EAL.
 - As we kept a dummy library, there are now two objects with the
 same name. This means that the proper rte_malloc.o object in eal gets
 overwritten by an empty rte_malloc.o object from the dummy malloc lib.
 Fix it by changing the name of rte_malloc.o object in the dummy
 library.
 - Update the copyright year.

Fixes: 2f9d47013e4dbb738 ("mem: move librte_malloc to eal/common")

Reported-by: Alin Rauta <alin.rauta@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
9 years agoversion: 2.1.0-rc1
Thomas Monjalon [Mon, 20 Jul 2015 01:44:18 +0000 (03:44 +0200)]
version: 2.1.0-rc1

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agodevargs: fix crash on failure
Stephen Hemminger [Fri, 15 May 2015 16:37:40 +0000 (09:37 -0700)]
devargs: fix crash on failure

This problem was discovered when passing invalid PCI id to the
blacklist API in devargs.

Any failures in rte_devargs_add would cause a core dump because
it would call rte_log() before the the EAL log environment was
initialized.  Rather than try and log just remove the messages
and leave it up to the caller to check the return value.

Most of the other failure possibilities are when malloc() fails, and if
that happens any logging that used malloc() would also fail.

This failure was not caught by the standalone tests to devargs
because the tests are run after calling rte_eal_init (which is not
how devargs is intended to be used).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agobonding: fix name and port validation
Stephen Hemminger [Wed, 10 Jun 2015 22:06:25 +0000 (15:06 -0700)]
bonding: fix name and port validation

Cleanup the code in bonding that checks ports.
  * Use standard rte_eth_dev_is_valid_port
  * Change name of driver string to avoid variable namespace conflicts
  * Get rid of unnecessary string comparison stuff. A simple pointer
    check is enough here.
  * Get rid of unnecessary assignment of driver_name, it is already
    done by common code.
  * Don't generate unnecessary log messages on error.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
9 years agoethdev: export function to check port validity
Stephen Hemminger [Wed, 10 Jun 2015 22:06:24 +0000 (15:06 -0700)]
ethdev: export function to check port validity

The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
9 years agoeal/linux: change log severity levels
Stephen Hemminger [Fri, 15 May 2015 17:10:47 +0000 (10:10 -0700)]
eal/linux: change log severity levels

Change the log level of startup messages. Anything that is
just normal activity (like getting virtual areas) is changed
to debug level. Anything that is a failure should be NOTICE
or ERR severity.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agoeal/linux: handle signal on event read
Stephen Hemminger [Wed, 15 Jul 2015 17:16:16 +0000 (10:16 -0700)]
eal/linux: handle signal on event read

The read for events in the interrupt thread may get interrupted
by signals from application. Avoid generating stray log message.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agoi40e: fix registers access from big endian CPU
Zhe Tao [Fri, 17 Jul 2015 07:25:40 +0000 (15:25 +0800)]
i40e: fix registers access from big endian CPU

Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
9 years agoi40evf: fix RSS with less Rx queues than Tx queues
Jingjing Wu [Mon, 13 Jul 2015 01:21:41 +0000 (09:21 +0800)]
i40evf: fix RSS with less Rx queues than Tx queues

I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.

This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.

Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
9 years agoi40e: fix SCTP flow director
Jingjing Wu [Tue, 7 Jul 2015 07:58:31 +0000 (15:58 +0800)]
i40e: fix SCTP flow director

Due to the NIC's firmware update, the input set of sctp flow is changed
to source IP, destination IP, source port, destination port and
Verification-Tag. This patch adds the sport and dport in the programming
packet of flow director.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
9 years agoethdev: add ports to SCTP flow director
Jingjing Wu [Tue, 7 Jul 2015 07:58:30 +0000 (15:58 +0800)]
ethdev: add ports to SCTP flow director

Add sport and dport into the input set of sctp flow.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
9 years agoapp/testpmd: fix port detaching with virtio
Bernard Iremonger [Wed, 15 Jul 2015 13:51:05 +0000 (14:51 +0100)]
app/testpmd: fix port detaching with virtio

At this point the stop() and close() functions have already been called.
The rte_eth_promiscuous_disable() function does not return on the VM.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agovirtio: free queue memory when closing
Bernard Iremonger [Wed, 15 Jul 2015 13:51:03 +0000 (14:51 +0100)]
virtio: free queue memory when closing

Add function virtio_free_queues() and call from virtio_dev_close()
Use virtio_dev_rx_queue_release() and virtio_dev_tx_queue_release()

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agovirtio: add queue release
Bernard Iremonger [Wed, 15 Jul 2015 13:51:02 +0000 (14:51 +0100)]
virtio: add queue release

Add functions virtio_dev_queue_release(), virtio_dev_rx_queue_release() and
virtio_dev_tx_queue_release().

Use queue_release in virtio_dev_uninit().

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
9 years agovirtio: check virtqueue parameter when detaching
Bernard Iremonger [Wed, 15 Jul 2015 13:51:01 +0000 (14:51 +0100)]
virtio: check virtqueue parameter when detaching

If vq is NULL, there is a segmentation fault.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agovirtio: support port hotplug
Bernard Iremonger [Wed, 15 Jul 2015 13:51:00 +0000 (14:51 +0100)]
virtio: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit_t() function for virtio pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
9 years agofm10k: support port hotplug
Michael Qiu [Tue, 14 Jul 2015 12:45:45 +0000 (20:45 +0800)]
fm10k: support port hotplug

Add hotplug support for fm10k.

Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
9 years agofm10k: free queue memory when closing
Michael Qiu [Tue, 14 Jul 2015 12:45:44 +0000 (20:45 +0800)]
fm10k: free queue memory when closing

When close a port, lots of memory should be released,
such as software rings, queues, etc.

Signed-off-by: Michael Qiu <michael.qiu@intel.com>
9 years agoi40e: free queue memory when closing
Bernard Iremonger [Fri, 3 Jul 2015 14:04:00 +0000 (15:04 +0100)]
i40e: free queue memory when closing

Add i40e_dev_free_queues() function and call it from close() functions.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40e: check Rx queue parameter when resetting
Bernard Iremonger [Fri, 3 Jul 2015 14:03:59 +0000 (15:03 +0100)]
i40e: check Rx queue parameter when resetting

There is a segmentation fault if rxq is NULL.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40evf: clear queues when stopping
Bernard Iremonger [Fri, 3 Jul 2015 14:03:58 +0000 (15:03 +0100)]
i40evf: clear queues when stopping

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40evf: clear command when error occurs
Bernard Iremonger [Fri, 3 Jul 2015 14:03:57 +0000 (15:03 +0100)]
i40evf: clear command when error occurs

_clear_cmd() was not being called in failure situations,
resulting in the next command also failing.
Fix several typos.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40evf: increase messaging wait time
Bernard Iremonger [Fri, 3 Jul 2015 14:03:56 +0000 (15:03 +0100)]
i40evf: increase messaging wait time

Increase delay from 50 * 10 to 100 * 20 to avoid i40evf_read_pfmsg() failures.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40e: free vmdq vsi when closing
Bernard Iremonger [Fri, 3 Jul 2015 14:03:55 +0000 (15:03 +0100)]
i40e: free vmdq vsi when closing

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoi40e: support port hotplug
Bernard Iremonger [Fri, 3 Jul 2015 14:03:54 +0000 (15:03 +0100)]
i40e: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoixgbe: free queue memory when closing
Bernard Iremonger [Thu, 2 Jul 2015 14:36:51 +0000 (15:36 +0100)]
ixgbe: free queue memory when closing

Add ixgbe_dev_free_queues() function and call it from close() functions.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoixgbe: support port hotplug
Bernard Iremonger [Thu, 2 Jul 2015 14:36:49 +0000 (15:36 +0100)]
ixgbe: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_ixgbe_pmd and
rte_ixgbevf_pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
9 years agoe1000: free queue memory when closing
Bernard Iremonger [Fri, 3 Jul 2015 14:38:27 +0000 (15:38 +0100)]
e1000: free queue memory when closing

Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoe1000: support port hotplug
Bernard Iremonger [Fri, 3 Jul 2015 14:38:26 +0000 (15:38 +0100)]
e1000: support port hotplug

This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_em_pmd,
rte_igb_pmd and rte_igbvf_pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
9 years agoethdev: free queue array when closing
Bernard Iremonger [Mon, 13 Jul 2015 13:04:05 +0000 (14:04 +0100)]
ethdev: free queue array when closing

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
9 years agoethdev: fix doxygen internal comments
Thomas Monjalon [Sat, 18 Jul 2015 18:04:13 +0000 (20:04 +0200)]
ethdev: fix doxygen internal comments

The internal functions must be marked with the doxygen command @internal.

The allocate and release_port functions are not restricted only to dummy
drivers.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agoethdev: refactor port release
Thomas Monjalon [Sat, 18 Jul 2015 17:46:20 +0000 (19:46 +0200)]
ethdev: refactor port release

Use DEV_DETACHED constant and deduplicate code in init.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agopci: fix detach and uninit naming
Thomas Monjalon [Sat, 18 Jul 2015 18:35:57 +0000 (20:35 +0200)]
pci: fix detach and uninit naming

There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agodoc: rename ABI chapter to deprecation
Thomas Monjalon [Sat, 18 Jul 2015 19:08:58 +0000 (21:08 +0200)]
doc: rename ABI chapter to deprecation

This chapter is for ABI and API. That's why a renaming is required.

Remove also the examples which are now in the referenced guidelines.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
9 years agohash: fix build for non-x86 arch
Pablo de Lara [Fri, 17 Jul 2015 09:17:58 +0000 (10:17 +0100)]
hash: fix build for non-x86 arch

Hash library uses optimized compare functions that use
x86 intrinsics, therefore non-x86 systems could not build
the library. In that case, the compare function is set
to the generic memcmp.

Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")

Reported-by: Zhigang Lu <zlu@ezchip.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Zhigang Lu <zlu@ezchip.com>
9 years agoexamples/vhost: fix driver unregistering
Ouyang Changchun [Mon, 6 Jul 2015 02:26:53 +0000 (10:26 +0800)]
examples/vhost: fix driver unregistering

The following commit broke vhost sample when it runs in second time:
292959c71961acde0cda6e77e737bb0a4df1559c

It should call api to unregister vhost driver when sample exit/quit, then
the socket file will be removed(by calling unlink), and thus make vhost sample
work correctly in the second time startup.

Test report: http://dpdk.org/ml/archives/dev/2015-July/020896.html

Fixes: 292959c71961 ("vhost: cleanup unix socket")

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
9 years agoexamples/vhost: fix comment and log
Ouyang Changchun [Mon, 6 Jul 2015 02:26:52 +0000 (10:26 +0800)]
examples/vhost: fix comment and log

It fixes the wrong log info when failing to unregister vhost driver.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
9 years agovhost: add log on socket bind failure
Ouyang Changchun [Mon, 6 Jul 2015 02:26:51 +0000 (10:26 +0800)]
vhost: add log on socket bind failure

It adds more readable log info if a socket fails to bind to
local socket file name.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
9 years agoapp: replace dump_cfg by proc_info
Maryam Tahhan [Wed, 15 Jul 2015 13:11:32 +0000 (14:11 +0100)]
app: replace dump_cfg by proc_info

proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoixgbe: account more Rx errors
Maryam Tahhan [Wed, 15 Jul 2015 13:11:31 +0000 (14:11 +0100)]
ixgbe: account more Rx errors

ierrors only included a base set of error statistics, this patch adds
additional error registers to ierrors.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoixgbe: add specific stats
Maryam Tahhan [Wed, 15 Jul 2015 13:11:30 +0000 (14:11 +0100)]
ixgbe: add specific stats

Add the NIC/HW specific stats that were removed from rte_ethdev.c to
the extended stats in ixgbe.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoethdev: remove driver specific stats
Maryam Tahhan [Wed, 15 Jul 2015 13:11:29 +0000 (14:11 +0100)]
ethdev: remove driver specific stats

Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoethdev: expose generic and driver specific stats in xstats
Maryam Tahhan [Wed, 15 Jul 2015 13:11:28 +0000 (14:11 +0100)]
ethdev: expose generic and driver specific stats in xstats

Extend rte_eth_xstats_get to retrieve additional stats from the device
driver as well the ethdev generic stats.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
9 years agoixgbe: add xstats
Maryam Tahhan [Wed, 15 Jul 2015 13:11:27 +0000 (14:11 +0100)]
ixgbe: add xstats

Implement ixgbe_dev_xstats_reset and ixgbe_dev_xstats_get.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>