examples/l3fwd-power: add legacy mode option

Currently, legacy mode is the implicit default, but it is not possible
to directly request using legacy mode. Add the argument to enable
requesting legacy mode, and also make it the default.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>

examples/l3fwd-power: fix style and control flow

Make the coding style more consistent, and the init logic control flow
more explicit.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>

examples/l3fwd-power: allow only supported environments

Currently, l3fwd-power will attempt to run even if the power env
is set to KVM, which is not supported. Fix this by preventing the
app from initializing unless the env is set to one of the supported
modes.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>

examples/l3fwd-power: disable interrupts by default

Currently, interrupts are enabled in telemetry and empty poll modes, but
they are not used. Switch to disabling interrupts by default, and only
enable interrupts for modes that require them.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>

pci: keep API compatibility with mmap values

The function pci_map_resource() returns MAP_FAILED in case of error.
When replacing the call to mmap() by rte_mem_map(),
the error code became NULL, breaking the API.
This function is probably not used outside of DPDK,
but it is still a problem for two reasons:
- the deprecation process was not followed
- the Linux function pci_vfio_mmap_bar() is broken for i40e

The error code is reverted to the Unix value MAP_FAILED.
Windows needs to define this special value (-1 as in Unix).
After proper deprecation process, the API could be changed again
if really needed.

Because of the switch from mmap() to rte_mem_map(),
another part of the API was changed: "int additional_flags"
are defined as "additional flags for the mapping range"
without mentioning it was directly used in mmap().
Currently it is directly used in rte_mem_map(),
that's why the values rte_map_flags must be mapped (sic) on the mmap ones
in case of Unix OS.

These are side effects of a badly defined API using Unix values.

Bugzilla ID: 503
Fixes: 2fd3567e5425 ("pci: use OS generic memory mapping functions")

Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>

eal: fix parentheses in alignment macros

Found an issue while using RTE_ALIGN_MUL_NEAR with an
expression, like as passed in estimate_tsc_freq().
RTE_ALIGN_MUL_FLOOR resulted in unexpected value as
parathesis are required to evaluate an expression.

Fixes: 5120203d753f ("eal: add macros to align value to multiple")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>

doc: add RIB and FIB into the API index

Add RIB/FIB library into the API doxygen index.
Move LPM/LPM6 under separate section "routing".

Fixes: 5a5793a5ffa2 ("rib: add RIB library")
Fixes: f7e861e21c46 ("rib: support IPv6")
Fixes: 39e927248416 ("fib: add FIB library")
Fixes: 40d41a8a7b34 ("fib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>

eal/windows: detect insufficient privileges for hugepages

AdjustTokenPrivileges() succeeds even if no requested privileges have
been granted; this behavior is documented. Check last error code in
addition to return value to detect such case.

Make error messages more specific and add troubleshooting hint.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>

net: fix checksum on big endian CPUs

With current code, the checksum of odd-length buffers is wrong on
big endian CPUs: the last byte is not properly summed to the
accumulator.

Fix this by left-shifting the remaining byte by 8. For instance,
if the last byte is 0x42, we should add 0x4200 to the accumulator
on big endian CPUs.

This change is similar to what is suggested in Errata 3133 of
RFC 1071.

Fixes: 6006818cfb26("net: new checksum functions")
Cc: stable@dpdk.org
Signed-off-by: Hongzhi Guo <guohongzhi1@huawei.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

net: fix unneeded replacement of TCP checksum 0

Per RFC768:
If the computed checksum is zero, it is transmitted as all ones.
An all zero transmitted checksum value means that the transmitter
generated no checksum.

RFC793 for TCP has no such special treatment for the checksum of zero.

Fixes: 6006818cfb26 ("net: new checksum functions")
Cc: stable@dpdk.org
Signed-off-by: Hongzhi Guo <guohongzhi1@huawei.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>

vhost: restrict pointer aliasing for packed ring

Restrict pointer aliasing to allow the compiler to vectorize loop
more aggressively.

With this patch, a 9.6% improvement is observed in throughput for
the packed virtio-net PVP case, and a 2.8% improvement in throughput
for the packed virtio-user PVP case. All performance data are measured
on ThunderX-2 platform under 0.001% acceptable packet loss with 1 core
on both vhost and virtio side.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>

net/virtio: restrict pointer aliasing for NEON

Restrict pointer aliasing to allow the compiler to vectorize loops
more aggressively.

With this patch, a 9.6% improvement is observed in throughput for
the virtio-net PVP case, and a 2.4% perf improvement in throughput
for the virtio-user PVP case. All performance data are measured
on ThunderX-2 platform under the 0.001% acceptable packet loss with
2 cores on the vhost side and 1 core on the virtio side.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>

introduce restricted pointer aliasing marker

The 'restrict' keyword is recognized in C99, while type qualifier
'__restrict' compiles ok in C with all language levels. This patch
is to replace the existing 'restrict' with '__rte_restrict' which
is a common wrapper supported by all compilers.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

test/lpm: add RCU performance tests

Add performance tests for RCU integration. The performance
difference with and without RCU integration is very small
(~1% to ~2%) on both Arm and x86 platforms.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>

test/lpm: add RCU functional tests

Add positive and negative tests for API rte_lpm_rcu_qsbr_add.
Also test LPM library behavior when RCU QSBR is enabled.

Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>

lpm: implement RCU rule reclamation

Currently, the tbl8 group is freed even though the readers might be
using the tbl8 group entries. The freed tbl8 group can be reallocated
quickly. This results in incorrect lookup results.

RCU QSBR process is integrated for safe tbl8 group reclaim.
Refer to RCU documentation to understand various aspects of
integrating RCU library into other libraries.

To avoid ABI breakage, a struct __rte_lpm is created for lpm library
internal use. This struct wraps rte_lpm that has been exposed and
also includes members that don't need to be exposed such as RCU related
config.

Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>

eal/linux: use C11 atomics for interrupt status

The event status is defined as a volatile variable and shared between
threads. Use C11 atomic built-ins with explicit ordering instead of
rte_atomic ops which enforce unnecessary barriers on aarch64.

The event status has been cleaned up by the compare-and-swap operation
when we free the event data, so there is no need to set it to invalid
after that.

Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>

ring: use custom element for fixed size API

Use rte_ring_xxx_elem_xxx APIs to replace legacy API implementation.
This reduces code duplication and improves code maintenance.

Tests done on Arm, x86 [1] and PPC [2] do not indicate performance
degradation.
[1] https://mails.dpdk.org/archives/dev/2020-July/173780.html
[2] https://mails.dpdk.org/archives/dev/2020-July/173863.html

Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

ring: remove experimental flag from custom element API

Remove the experimental tag for rte_ring_xxx_elem APIs that have been
around for 2 releases.

Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

ring: remove experimental flag from reset API

Remove the experimental tag for rte_ring_reset API that have been around
for 4 releases.

Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

service: fix C++ linkage

"extern C" define is added to rte_service_component.h file
to be able to use in C++ context

Fixes: 21698354c832 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Levend Sayar <levendsayar@gmail.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

ethdev: fix log type for some error messages

Some log macros was using 'EAL' logtype, convert them to 'ethdev'.
Also fix missing EOL and fix syntax for some logs.

Fixes: 214ed1acd125 ("ethdev: add iterator to match devargs input")
Fixes: e489007a411c ("ethdev: add generic create/destroy ethdev APIs")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>

doc: update feature list in hns3 guide

This patch updates the feature list for hns3 PMD driver document.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix inserted VLAN tag position in Tx

Based on hns3 network engine, in order to configure hardware VLAN insert
offload in Tx direction, PMD driver reads the VLAN tags from the
vlan_tci_outer and vlan_tci of the structure rte_mbuf, fills them into
the Tx Buffer Descriptor and sets the related offload flag for every
packet.

Currently, there are two VLAN related problems in the 'tx_pkt_burst' ops
implementation function:
1) When setting the related offload flag, PMD driver inserts the VLAN
   tag into the position that close to L3 header. So, when upper
   application sends a packet with a VLAN tag in the data buffer, the
   VLAN offloaded by hardware will be added to the wrong position. It is
   supposed to add the VLAN tag from the rte_mbuf to the position close
   to the MAC header in the packet when using VLAN insertion.

   And when PF PVID is enabled by calling the API function named
   rte_eth_dev_set_vlan_pvid or VF PVID is enabled by hns3 PF kernel
   ether driver, the VLAN tag from the structure rte_mbuf to enable the
   VLAN insertion should be filled into the position that close to L3
   header to avoid to be overwritten by the PVID which will always be
   inserted in the position that close to the MAC address.

2) When sending multiple segment packets, VLAN information is required
   to be filled into the first Tx Buffer descriptor. However, currently
   hns3 PMD driver incorrectly placed it in the last Tx Buffer
   Descriptor. This results in VLAN insert offload failure when sending
   multiple segment packets.

This patch fixed them by filling the VLAN information into the position
of the Tx Buffer Descriptor.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>

net/hns3: cleanup duplicated code on processing TSO in Tx

This patch fixes up paylen calculation twice when processing TSO request
in the '.tx_pkt_burst' ops implementation function to avoid performance
loss.

Fixes: 6dca716c9e1d ("net/hns3: support TSO")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>

net/hns3: check multi-process action register result

Currently, there is a coverity defect warning about hns3 PMD driver, the
detail information as blow:
CID 289969 (#1 of 1): Unchecked return value (CHECKED_RETURN)
1. check_return: Calling rte_mp_action_register without checking return
   value (as is done elsewhere 11 out of 13 times).

The problem is that missing checking the return value of calling the API
rte_mp_action_register during initialization. If registering an action
function for primary and secondary communication failed, the secondary
process can't work properly.

This patch fixes it by adding check return value of the API function
named rte_mp_action_register in the '.dev_init' implementation function
of hns3 PMD driver.

Coverity issue: 289969
Fixes: 23d4b61fee5d ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

app/testpmd: enable empty polls in burst stats

The number of empty polls provides information about available
CPU head room in the presence of continuous polling.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>

app/testpmd: fix burst percentage calculation

The burst % calculation can over flow due to multiplication.
Fix the multiplication and increase the size of variables to
64b.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>

app/testpmd: use clock time in throughput calculation

The throughput calculation requires a counter that measures
passing of time. However, the kernel saves and restores the PMU
state when a thread is unscheduled and scheduled. This ensures
that the PMU cycles are not counted towards a thread that is
not scheduled. Hence, when RTE_ARM_EAL_RDTSC_USE_PMU is enabled,
the PMU cycles do not represent the passing of time.
This results in incorrect calculation of throughput numbers.
Use clock_gettime system call to calculate the time passed since
last call.

Bugzilla ID: 450
Fixes: 0e106980301d ("app/testpmd: show throughput in port stats")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>

vhost: introduce async enqueue for split ring

This patch implements async enqueue data path for split ring. 2 new
async data path APIs are defined, by which applications can submit
and poll packets to/from async engines. The async engine is either
a physical DMA device or it could also be a software emulated backend.
The async enqueue data path leverages callback functions registered by
applications to work with the async engine.

Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: introduce async enqueue registration API

Performing large memory copies usually takes up a major part of CPU
cycles and becomes the hot spot in vhost-user enqueue operation. To
offload the large copies from CPU to the DMA devices, asynchronous
APIs are introduced, with which the CPU just submits copy jobs to
the DMA but without waiting for its copy completion. Thus, there is
no CPU intervention during data transfer. We can save precious CPU
cycles and improve the overall throughput for vhost-user based
applications. This patch introduces registration/un-registration
APIs for vhost async data enqueue operation. Together with the
registration APIs implementations, data structures and the prototype
of the async callback functions required for async enqueue data path
are also defined.

Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

app/testpmd: add GTPU to RSS hash commands

Add testpmd cmdline support for GTPU, it could be used to configure
gtpu teid hash. The commands as below:

testpmd> flow create 0 ingress pattern eth / ipv4 / udp / gtpu / \
ipv4 / end actions rss types gtpu end  key_len 0 queues end / end

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: enable additional input set for RSS hash

PF could add or delete a RSS rule base on the PF's hash capability.
Some new rss input set will be supported, the protocols as below:
eth/vlan/l2tpv3/esp/ah/pfcp.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support hash for GTPU protocols

Support hash flow for the new protocols of GTPU_EH UPLINK, GTPU_EH
DOWNLINK and GTPU_IP.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: refactor PF hash flow

Refactor hash flow by change the action parser and clean some code.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: enable additional hash flow

Some new hash flow will be supported to expend the flow hash
capability, the input set are the session id for NAT-T ESP protocol,
the l3 src/dst and the teid for GTPU_IP protocol.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: enable 5 tuple RSS hash

Previous iavf not support 5 tuple hash, this patch aims to enable it
for regular ip pattern and also GTPU inner ip pattern, the 5 tuple
involves ip src and ip dst, tcp sport and tcp dport, udp sport and
udp dport and protocol id.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: refactor hash flow

Refactor hash flow by change the process of the pattern parser and the
action parser, and refine the lookup table for regular IP and GTPU_EH,
ETH, and also VLAN.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support ether type filter on flow director

This patch enables FDIR with input set ethertype.

Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/e1000/base: update version

Update base code version in readme.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: modify copyright

Modify the copyright of the file header.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: cleanup pre-processor tags

The codes has been exposed correctly, so remove pre-processor tags.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: introduce DPGFR register

Defined DPGFR, Dynamic Power Gate Force Control Register.

Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add ADL device ID

Add new device ID for Alder Lake brand.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: support MAC type for Nahum10

Add support to a new MAC type (for Nahum10).

Signed-off-by: Roman Fridlyand <roman.fridlyand@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: expose FEXTNVM registers and masks

Adding defines for FEXTNVM8 and FEXTNVM12 registers with new masks for
future use.

Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: fix led blinking for i210

Added initialization of identification LED.

Signed-off-by: Maciej Hefczyc <maciej.hefczyc@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>

net/e1000/base: modify flow control setup

Customers had a problem with large pings after connected standby.
This is due to the requirement of maintaining link after CS - the driver
blocks resets during "AdapterStart" and skips flow control setup.
Added condition in e1000_setup_link_ich8lan.c function that always setup
flow control, and setup physical interface only when no need to block
resets.

Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add missed define for VFTA

VLAN filtering using the VFTA (VLAN Filter Table Array) and
should be initialized prior to setting rx mode.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: remove useless statement

As it stands now, this fix will not change the current functionality
of the code. In addition, we remove the comment that seemed to be
a copy/paste from a separate implementation.

Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: expose more future extended NVM

Future extended NVM 5 (five) required for a Dynamic Power Gating
control in the MAC.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add missing device ID

Adding Intel(R) I210 Gigabit Network Connection 15F6 device ID for SGMII
flashless automotive device.

Signed-off-by: Kamil Bednarczyk <kamil.bednarczyk@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: increase timeout for ME ULP exit

Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.

Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add missing register defines

Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add PCIm function state

Added define to pcim function state.

Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: expose MAC functions

Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: remove duplicated codes

Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: modify HW level time sync mechanisms

Add additional configuration space access to allow HW
level time sync mechanism.

Signed-off-by: Evgeny Efimov <evgeny.efimov@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: fix minor issues and improve code style

Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.

Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add function parameter descriptions

Add function parameter descriptions to address gcc 7 warnings.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: fall through explicitly

Found some inconsistent code comments when it came to when we "fall
through", so made them more consistent and non-repetitive.

This patch adds/changes fall through comments to address new warnings
produced by gcc 7.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: expose xMDIO methods

Move read and write xmdio methods to e1000_phy.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: support i211

Add support SF/FW synchronization.
Add support to print PBA when using flashless.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: introduce flags for outstanding requests

Introduce flags to make flexible adjusting
number of outstanding requests.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: add ICL device ID

This patch contains a preliminary support for new LAN device ID.

Signed-off-by: Lotem Leder <lotem.leder@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/e1000/base: update for i210 slow system clock

This code is required for the update for system clock.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

net/ice: fix GTPU/PPPoE packets with no hash value

When RSS init, because of profile overlap, the GTPU_IPV4 packets
don't hit GTPU_INNER_IPV4 profile which causes no hash value. Because
of no PPPoE profile, the PPPoE packets also has no hash value. This
patch solves this issue by pulling GTPU_IPV4 profile into inner ipv4
group and creating related PPPoE profile at the same time.

Fixes: 4717a12cfaf1 ("net/ice: initialize and update RSS based on user config")

Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix getting EEPROM information

Fixes: 50130a0c4440 ("net/i40e/base: change AQ command for PHY access")
Cc: stable@dpdk.org
Signed-off-by: Pavel Ivashchenko <pivashchenko@nfware.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix error log in generic flow

When create a RSS rule with void action, the error log is "Invalid
input set". This patch fix the issue by adding check for the type of
first actions item.

Fixes: 7615a6895009 ("net/ice: rework for generic flow enabling")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support PPPoE RSS

This patch enables PPPoE control packets with src mac and session id
and PPPoE data packets with ip address and L4 port in rte_flow.

Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

app/testpmd: support extended RSS offload types

This patch adds testpmd cmdline support for PPPoE.

Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: add PPPoE RSS offload types

This patch defines new RSS offload types for PPPoE. Typically,
session id would be the RSS input set for a PPPoE packet, but
as a hint, each driver may have different default behaviors.

Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: update release notes for bnxt

Update release notes with enhancements in Broadcom PMD.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support count action in flow query

Use the flow counter manager to fetch the accumulated stats for
a flow.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add ULP flow counter manager

The Flow counter manager allocates memory to hold the software view
of the counters where the on-chip counter data will be accumulated
along with another memory block that will be shadowing the on-chip
counter data i.e where the raw counter data will be DMAed into from
the chip.
It also keeps track of the first HW counter ID as that will be needed
to retrieve the counter data in bulk using a TF API. It issues this cmd
in an rte_alarm thread that keeps running every second.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fill cfa action in Tx descriptor

Currently, only vfrep transmit requires cfa_action to be filled
in the tx buffer descriptor. However with truflow, dpdk(non vfrep)
to port also requires cfa_action to be filled in the tx buffer
descriptor.

This patch uses the correct cfa_action pointer while transmitting
the packet. Based on whether the packet is transmitted on non-vfrep
or vfrep, tx_cfa_action or vfr_tx_cfa_action inside txq will be
filled in the tx buffer descriptor.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add port default rules for ingress and egress

ingress & egress port default rules are needed to send the packet
from port_to_dpdk & dpdk_to_port respectively.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: create default flow rules for port reprentor

Invoked 3 new APIs for the default flow create/destroy and to get
the action ptr for a default flow.
Changed ulp_intf_update() to accept rte_eth_dev as input and invoke
the same from the VF rep start function.
ULP Mark Manager will indicate if the cfa_code returned in the
Rx completion descriptor was for one of the default flow rules
created for the VF representor conduit. The mark_id returned
in such a case would be the VF rep's DPDK Port id, which can be
used to get the corresponding rte_eth_dev struct in bnxt_vf_recv

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add port representor and stat templates

The support for VF representor and counters is added to the
ulp templates.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fill mapper parameters with default rules

Default rules are needed for the packets to be punted between the
following entities in the non-offloaded path
1. Device PORT to DPDK App
2. DPDK App to Device PORT
3. VF Representor to VF
4. VF to VF Representor

This patch fills all the relevant information in the computed fields
& the act_prop fields for the flow mapper to create the necessary
tables in the hardware to enable the default rules.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: parse representors along with other devargs

Representor dev-args need to be parsed during pci probe as they determine
subsequent probe of VF representor ports as well.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: manage VF to VFR conduit

When VF-VFR conduits are created, a mark is added to the mark database.
mark_flag indicates whether the mark is valid and has VFR information
(VFR_ID bit in mark_flag). Rx path was checking for this VFR_ID bit.
However, while adding the mark to the mark database, VFR_ID bit is not
set in mark_flag.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: enhance port DB

1. Add "enum bnxt_ulp_intf_type” as the second parameter for the
   port & func helper functions
2. Return vfrep related port & func information in the helper functions
3. Allocate phy_port_list dynamically based on port count
4. Introduce ulp_func_id_tbl array for book keeping func related
   information indexed by func_id

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: enable port MAC qcfg command for trusted VF

Issue HWRM_PORT_MAC_QCFG command on trusted vf to fetch the port count.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support conditional execution of mapper tables

Added support for conditional execution of the mapper tables so that
actions like count will have table processed only if action count
is configured.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support internal exact match entries

Added support for the internal exact match entries.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support global resource templates

Added support for the global resource templates, so that they
can be reused by the other regular templates.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add index opcode and operand to mapper table

Extended the regfile and computed field operations to a common
index opcode operation and added globlal resource operations are
also part of the index opcode operation.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: disable Tx vector mode on TruFlow

The vector mode in the tx handler is disabled when truflow is
enabled since truflow now requires bd action record support.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support IF table processing

Added support for if table processing in the ulp mapper
layer. This enables support for the default partition action
record pointer interface table.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support internal encap records

Modifications to allow internal encap records to be supported:
- Modified the mapper index table processing to handle encap without an
  action record
- Modified the session open code to reserve some 64 Byte internal encap
  records on tx
- Modified the blob encap swap to support encap without action record

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: integrate with the latest TF core changes

ULP changes to integrate with the latest session open
interface in tf_core

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support EEM system memory

- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: add global config set and get functions

- Add support to update global configuration for ACT_TECT
  and ACT_ABCR.
- Add support to allow Tunnel and Action global configuration.
- Remove register read and write operations.
- Remove the register read and write support.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add TF register and unregister

- Add TF register/unregister support. Session got session clients to
  keep track of the ctrl-channels/function.
- Add support code to tfp layer

Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: implement IF tables set and get

- Implement set/get for PROF_SPIF_CTXT, LKUP_PF_DFLT_ARP,
  PROF_PF_ERR_ARP with tunneled HWRM messages
- Add IF table for PROF_PARIF_DFLT_ARP
- Fix page size offset in the HCAPI code
- Fix Entry offset calculation

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: align CFA resources with RM

- HCAPI resources need to align for Resource Manager
- Clean up unnecessary debug messages

Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add external action allocate and free

- Link external action alloc and free to new hcapi interface
- Add parameter range checking
- Fix issues with index allocation check

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove table scope from session

- Remove table scope data from session. Added to EEM.
- Complete move to RM of table scope base and range.
- Fix some err messaging strings.
- Fix the tcam logging message.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update RM to support HCAPI only

- For the EM Module there is a need to only allocate the EM Records in
  HCAPI RM but the storage control is requested to be outside of the RM
  DB.
- Add TF_RM_ELEM_CFG_HCAPI_BA.
- Return error when the number of reserved entries for wc tcam is odd
  number in tf_tcam_bind.
- Remove em_pool from session
- Use RM provided start offset and size
- HCAPI returns entry index instead of row index for WC TCAM.
- Move resource type conversion to hrwm set/free tcam functions.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>