net/bnxt: fix scalar Tx completion handling

Preserve the raw (unmasked) transmit completion ring
consumer index.

Remove cache prefetches that have no measurable performance
benefit.

Fixes: c7de4195cc4c ("net/bnxt: modify ring index logic")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix Tx descriptor status implementation

With Tx completion batching, a single transmit completion
can correspond to one or more transmit descriptors, adjust
implementation to account for this.

RTE_ETH_TX_DESC_DONE should be returned for descriptors that
are available for use instead of RTE_ETH_TX_DESC_UNAVAIL.

Fixes: 5735eb241947 ("net/bnxt: support Tx batching")
Fixes: 478ed3bb7b9d ("net/bnxt: support Tx descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix ring and context memory allocation

Use requested socket ID when allocating memory for transmit rings,
receive rings, and completion queues. Use device NUMA ID when
allocating context memory, notification queue rings, async
completion queue rings, and VNIC attributes.

Fixes: 6eb3cc2294fd ("net/bnxt: add initial Tx code")
Fixes: 9738793f28ec ("net/bnxt: add VNIC functions and structs")
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Fixes: bd0a14c99f65 ("net/bnxt: use dedicated CPR for async events")
Fixes: 683e5cf79249 ("net/bnxt: use common NQ ring")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: invoke device removal event on recovery failure

When the driver receives RESET_NOTIFY async event from FW or detects
a FW fatal error condition, it tries to recover from the error.
When the driver fails to recover from the error condition, fixed to
send device removal event to the application.

Fixes: df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix auto-negociation on Whitney+

Driver should enable autoneg on a port if FW supports it.
Because of a wrong check, driver is not enabling autoneg
on a port after setting forced speed on Whitney+.

Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix typo in log message

In bnxt_rss_hash_update_op, check for valid RSS hashkey length is
made against size HW_HASH_KEY_SIZE(40). But the failure log says
"Invalid hashkey length, should be 16 bytes".

Fixes: 91aee9711ee3 ("net/bnxt: validate RSS hash key length")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: cleanup code

This is a cleanup commit and no functional change.

1. use macros instead of hard coded values
2. remove unnecessary comments

Fixes: 5cd0e2889c43 ("net/bnxt: support NIC Partitioning")
Fixes: 2ba07b7dbd9d ("net/bnxt: set the hash key size")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: dump SFP module info

Add support to fetch the SFP EEPROM settings from the firmware.
For SFP+ modules we will display 0xA0 page for status and 0xA2 page
for other information. For QSFP modules we will show the 0xA0 page.

Also identify the module types for QSFP28, QSFP, QSFP+ apart
from the SFP modules and return an error for 10GBase-T PHY.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: support Thor template

Template adds non-VF representor based support.
Item matches supported:
- DMAC, SIP, DIP, Proto, Sport, Dport
- SIP, DIP, Proto, Sport, Dport
Actions supported:
- count, drop

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: reorganize ULP template directory structure

Reorganize ULP template directory structure and add meson.build
file to the respective directories.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: cleanup ULP parser and mapper

1. Disable accum_stats for Thor
2. Delete the generic port table for default flow
3. The packet mask to calculate the number of packets must be 28 bits.
4. Increase the WC TCAM entries to 512 per application and add 2
   shared L2 context TCAM entries to match identifiers for flow
   scaling
5. Ignore multiple critical resources in ULP flow database
6. Renamed conditional code update to function opcode.
7. Updated TRUFLOW debug logs to support the above changes.
8. As part of the HA cleanup, the shared session name now allows the user
   to designate that the session uses the wc_tcam regions within the
   shared session.
9. The CFA action pointer does not exist if there is no support for
   VF representor, so no need to display the message for use case where
   there is no support for VF representors.
10. Cleanup flow counter software accumulation.
11. When an application exits ungracefully, the HA code now
    clears the appropriate shared WC region and sets the HA state.
12. Removal of unnecessary INFO message.  The message is an indicator that
    the ports are being removed from DPDK, but all cleanup has not
    completed.  Once the cleanup is completed, the timer will be stopped.

Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add context list for timers

Add context in ULP for timers.
The alarm callback needs to have a valid context pointer when it is
invoked. The context could become invalid if the port goes down and
the callback is invoked before it is cancelled.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add ICMPv6 parser to ULP

This patch adds support for parsing rte_flow items for ICMPv6 flows.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add HA support in ULP

Add the ability for cooperative applications to share resources and
use the high availability functionality in the HW.

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add templates for shared sessions

1. Add template support for shared sessions.
2. Store the shared session flag in flow data base.
3. Store WC TCAM region in the computational field.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: process resource lists before session open

Shared sessions require both named and unnamed resources to be requested
during a tf_open_session. ULP uses named resources for global resources
that are pre-allocated and remain through the life of the application.
Unnamed resources are generally per flow resources and allocated on
demand. The sum of both named and unnamed resources must be requested
when initializing the session.  The ulp_init now processes both lists
prior to calling tf_open_session for both shared and regular sessions.

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support application ID in ULP matcher

The application id in the ULP matcher makes the template matching
restrict to only flows that are supported for that application.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add field opcodes in ULP

Add field opcodes that perform logical evaluation of
multiple conditions. Also add more logging especially in
error path.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add shared session support to ULP

Shared session permits cooperative sharing of prescribed resources
between applications.

- devargs added for app-id in order to enable sharing session
  resources across applications
- shared session management added
- TRUFLOW resource reservations are now app ID and device dependent

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: refactor flow parser in ULP

1. Remove Ether type, VLAN type and IP proto type from pattern matching,
since the header bits can be used for matching. This reduces the class
template signatures by a factor of 8.

2. Remove the wild card bit in the pattern matching since same template
can be used for both exact and wild card entries.

3. The action record pointers have to use higher range to not collide
with the firmware action record pointers. Hence reduced the number of
action record pointers for Whitney platform.

4. The conditional update opcode provide functionality to reject flows
for instance reject flows that do not adhere to flow signature match.

5. Added check to not populate protocol specifications if the
protocol mask is null or zero.

6. Check that field array is not overrun.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support Thor platform

1. Add templates to support Thor platform.
2. Flow counter manager is not enabled if no flow counters are
   configured.
3. Mark database is not enabled if mark action is not supported.
4. Removed application to port default flow.
5. Add allocate and write for the global registry file.
6. Multiple default flow templates are combined to one.
7. Remove default loopback action record, this is required in order to
   support multiple platforms.
8. Enable port table support in the generic table.
9. remove global template table in order to support multiple platforms.
10. Add support to get parent VNIC from port table database.
11. VF representor action mark is made optional since not all
    configurations need representor support.
12. Add layer 4 ports to computational fields.
13. Update templates to support the above changes.
14. Add support for wildcard.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support generic hash table

Added support for generic table to enable search of keys that
are larger than 16 bits using hash table.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: refactor ULP mapper

1. The internal and external exact match table resource types
is combined since the resource handle contains the encoded
type whether it is internal or external exact match entry.

2. When a flow doesn't hit the offloaded rules, the default action is
to send it to the kernel (L2 driver interface). In order to do that,
TRUFLOW must know the kernel interface's (PF's) default vnic id.
This patch fetches the PF's default vnic id from the dpdk core and
stores it in port database. It also stores the mac addr for the
future usage. Renamed compute field for layer 4 port enums.
Added support for port database opcode that can get port details
like mac address which can then be populated in the l2 context entry.

3. Both active and default bit set need to considered to check if a
specific flow type is enabled or not.

4. ulp mapper fetches the dpdk port id from the compute field index
BNXT_ULP_CF_IDX_DEV_PORT_ID which is used to get the interface’s
mac address eventually. However, the compute field array is not
populated with dpdk port id at the index BNXT_ULP_CF_IDX_DEV_PORT_ID.
The problem fixed by populating the compute field array correctly.

5. Some dpdk applications may accumulate the flow counters while some
may not. In cases where the application is accumulating the counters
the PMD need not do the accumulation itself and viceversa to report
the correct flow counters.

6. Pointer to bp is added to open session parms to support
shared session.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>

net/bnxt: support extended exact match

The templates are updated to enable the extended exact match
table support. As part of this change, the action record size of
the action has to be calculated dynamically so it can be included
in the match table.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support GRE flows

This patch does the following to support GRE flows:
1. RTE_FLOW_ITEM_TYPE_ANY & RTE_FLOW_ITEM_TYPE_GRE processing
2. Calculate the absolute function ID from the logical VF ID
   passed as part of RTE_FLOW_ACTION_TYPE_VF action.
3. Move bnxt_get_bp API to bnxt_ethdev.c

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support wildcard pattern matching

The computational field is enabled for wild card pattern support.
The template checks the computational field to add a flow as wild
card entry or exact match entry.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add partial header field processing

For support for wild card TCAM, some of the header fields have to
be partially written, hence this new opcode is added.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: refactor TRUFLOW processing

1. The flow database opcode is updated to split the alloc push resource
item so it can be controlled using the control table.

2. The class and action match signatures are populated with pattern ids
that are matched against template pattern id to reject any unsupported
class and action combinations.

3. The flow DB opcode should be no op when accessing the
global registry identifiers.

4. The resource function for branch is changed to control so that it
is extended to perform flow database operations and not just branch
operations.

5. The conditional goto processing now supports negative numbers to
support looping of the mapper tables to support flow ranges and
also enable conditional fail goto to support failure path mapper
tables.

6. The field mapper opcode is updated to add all ones to fields
that support exact match.

7. Added key info and identifier list to whitney action templates
The whitney plus templates are updated to use the mapper infrastructure
changes.

8. The partition interface table configuration of the default
egress rule for the representor interface needs to use the
reserved parif interface that is specific to each
platform. The pipeline for the representor interface is broken
since incorrect parif configuration cause the miss path packets to
be dropped.

9. In the mapper table processing, if a failure condition is hit
due to invalid memory type then use the conditional goto failure
configuration instead of jumping to next table. This causes ipv6
exact match entry to be skipped. This patch fixes that issue.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add conditional opcode and L4 port fields

The conditional field opcode provides capability to perform
changes to the field values specified by template to address
platform specific modifications. For instance, mirror id value
is modified before it is configured in the hardware.

The addition of L4 port compute fields enables support of
generic exact match rule that can support both TCP and UDP
flows with the same template.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify ULP template

1. Update template to add both ipv4 and ipv6 flows.
2. The VF representor template missed generic table read.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: set shared handle for generic table

The shared handle is set in the mapper params when generic resource
are created, this shall be used by application as a handle to the
shared resource like mirror handle.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add conditional goto processing

The condition execute of the mapper tables have goto field that
defines the offset of the next table to be processed instead of
sequential processing of the tables, this improving the performance.
Also, modify key and mask field opcode processing

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: identify duplicate flows

Conflict resolution feature allows rejection of flows based on
the previously added flows that conflict. For instance, a five
tuple flow is added and then you add a new flow with only 4 tuple
instead having same layer2 details then it will be rejected.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add ULP priority opcode processing

Added ULP priority opcode to enable flexibility to
the usage of the flow priority. New opcodes help template
specify the flow priority accordingly.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Douglas Flint <douglas.flint@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify table processing

1. Added interface table specific opcode to process interface table
entry creation and reuse. This allows reuse of the interface table
entry for multiple flows. Changed the regfile apis to store
the data in big endian format.

2. The result blob creation being done in tcam, interface, index
tables are consolidate to a common method.

3. Added result blob processing for generic table write

4. Modified the index table opcode processing to support new opcodes.

5. The driver was setting key size that did not take into account
   the word alignment.

6. The hard coded values for critical resource is replaced with
   template defined values.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify VXLAN decap for multichannel mode

The driver is using physical port id as the index into
the tunnel inner flow table. However, this will not work in case
of multichannel mode where multiple physical functions are going
to share the same physical port id.

When tunnel inner flow offload request comes before tunnel
outer flow offload request, the driver caches the tunnel inner flow
details and programs it in the hardware after installing the tunnel
outer flow in the hardware. If more than one tunnel inner flow arrives
before tunnel outer flow is offloaded, the driver rejects any such
tunnel inner flow offload requests.

This patch fixes the above two problems by
1. Using dpdk port id as the index to store tunnel inner info.
2. Caching any number of tunnel inner flow offload requests that come
   before offloading tunnel outer flow offload request

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify TCAM opcode processing

Added TCAM table specific opcode to process TCAM entry creation
and reuse. This change removes the TCAM cache mechanism and uses
the generic table mechanism for reuse of TCAM entries.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add conditional processing of templates

Conditional execution and rejection processing added for templates and
tables.  This allows the mapper to skip tables and reject templates
based on the content without having to hard code rules.

Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support mapper flow database opcodes

Added support for mapper flow database opcode to enable
shared resources like mirror action. This allows mapper
to conditionally populate flow database based on template content.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support generic table processing

Added support for generic table processing, this feature shall
enable support for shared resource like mirror and TCAM
cache tables.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: check FW capability to support TRUFLOW

Currently, a devarg (host-based-truflow) is passed while launching
the app to enable TRUFLOW feature. However, this mechanism adds
an extra step in enabling TRUFLOW. This doesn't give a seamless
experience when flow offloads has to work with FW that doesn't/does
support TRUFLOW feature. Also, it's likely that customers may not
want to use devarg to enable flow offloads.

This patch fixes it by checking for TRUFLOW feature support in
device's capabilities and configurations field of the hwrm_ver_get.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: add functions to clear TCAM regions

Add TRUFLOW API to clear either the hi or the low regions
in WildCard TCAM for ungraceful exit cleanup.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support WC TCAM shared session

If the session shares WC TCAM entries with others,
specify it in the session name by attach "-wc_tcam".
Firmware will flush the shared WC TCAM entries if
the last shared session using them is closed.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: cleanup WC TCAM shared pool

Clean up all allocated hi or lo pool TCAM regions on close.
Along with message cleanup and remove unnecessary multi-slice options
Also make sure that find next free entry should start from 0 first time.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: refactor host session failure cleanup

- Close FW session if session open fails after Fw session open.
- Additional WC TCAM debug info to help in future debug
- Reduce key/mask buffer sizes for performance
- When a 64b counter is freed, clear the entry

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add functions to get shared table increments

Add TRUFLOW API to get the shared table increment value
for a given TRUFLOW table type.
The API is being added for Wh+ and Thor devices.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support WC TCAM management

- Add new API to move WC TCAM regions from the hi pool
  to the low pool.
- Enable shared TCAM get/set functions on Thor.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: cleanup logs in session handling paths

Cleanup some of the log messages in the session open and close paths.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support shared TCAM region

- switch to single slice management on Wh+
- Support of shared session WC_TCAM_HIGH and WC_TCAM_LOW regions
- Enable/disable using TF_TCAM_SHARED flag in tf_core.h
- Fix empty session module DBs in the case that none are
  allocated for a given module type

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify resource reservation strategy

Allow an application to only reserve resources for one direction.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update shared session functionality

- Distinguish the shared session on host side using PCI address
- One session could be shared by multiple interfaces.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add dpool allocator for EM allocation

The dpool allocator supports variable size entries and
also supports defragmentation of the allocation space.
EM will by default use the fixed size stack allocator.
The dynamic allocator may be selected at build time.
The dpool allocator supports variable size entries and
also supports defragmentation of the allocation space.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support shared session

There are 2 types of sessions - shared and non-shared.  For non-shared
all the allocated resources are owned and managed by a single
session instance. No other applications have access to the
resources owned by the non-shared session.  For a shared session,
resources are shared between 2 applications.

The FW shared session can only be created by one application and
shared by other apps. The host session that creates the FW shared
session is the creator.

Applications can retrieve the reserved resources through a new API
tf_get_session_resc_info.

Each module supports two sessions, one is shared session, the other
is non-shared session.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: change RM database type

RM databases are statically defined in each module. New static
database needs to be defined in the code when multiple sessions
are added. Add dynamic alloc database and associate it to each
session.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: modify TRUFLOW HWRM messages

- Move Bulk get to a direct HWRM message
- Deprecate code based on HCAPI changes

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add hashing changes for Thor

- Move HCAPI hashing code to common file and add Thor support.
- Change DPDK EM insert for FKB to use limited size Type 3 key.
- Update FKB builder to be able to tell between EM and WC keys
  during transform.
FKB is the Flexible Key Builder in Thor used while inserting flows.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add 64B SRAM record management with RM

HCAPI RM now manages 64Byte records instead of 8Byte.
Truflow core RM will manage the same. The tf_tbl core
APIs now return 8B pointer addresses. These can
be used directly as SRAM pointers in Action Records.
When communicating with the firmware 8 byte addresses
will be used.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support Thor WC TCAM

1. Add set/get/free/alloc for WC TCAM
2. Rework the key size in slice management.
3. Add 3 FKB WC keys for WC TCAM set cli cmd
4. Add transform key function for WC TCAM FKB key
5. Add checking for key buffer length for get_tcam

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add action SRAM translation

- Translate Truflow action types for Thor to HCAPI RM
  resource defined SRAM banks.
- move module type enum definitions to tf_core API
- Switch to subtype concept for RM.
- alloc/free working for Thor SRAM table type for full AR.

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support L2 context TCAM operations

- Implement TCAM get in host
- Add Thor support for TCAM set/free

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support EM with FKB

Main TF changes to support EM insert with FKB.
Flexible Key builder is required to create Wild Card
and Exact Match keys for TCAM lookups.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: update TRUFLOW resources

- Remove unused tables from tf_tbl_type
- Encode flow type into flow handle (internal or external)
- Clean up Whitney resource tables
- Clean up Truflow CLI open tables and update Thor resources
- Add Thor SRAM and external pool types to core API
- Remove unneeded Stingray table reference

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: check resource reservation in TRUFLOW

- Allow tf_open to continue if no resource is allocated
  for some table type.
- Close the session if binding fails for any table.
- Close the session if no resource is allocated for all tables.

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add mailbox selection via device operation

Add get mailbox dev op so that mailbox offset is based on device
instead of a hard coded value.

Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add base TRUFLOW support for Thor

Add infrastructure code to support TRUFLOW on Thor NICs.
Also update meson.build

Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add CFA subdirectory of HCAPI

Before introducing more HCAPI components to DPDK, the CFA code needs
to be organized into a dedicated folder so it is separated from
other new HCAPI components

Signed-off-by: Jeffrey Huang <jeffrey.huang@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

power: refactor ACPI and intel_pstate support

Currently, ACPI and PSTATE modes have lots of code duplication,
confusing logic, and a bunch of other issues that can, and have, led to
various bugs and resource leaks.

This commit factors out the common parts of sysfs reading/writing for
ACPI and PSTATE drivers.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>

power: fix namespace for internal struct

Currently, ACPI code uses rte_power_info as the struct name, which
gives the appearance that this is an externally visible API. Fix to
use internal namespace.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

ethdev: add dev configured flag

Currently, if dev_configure is not called or fails to be called, users
can still call dev_start successfully. So it is necessary to have a flag
which indicates whether the device is configured, to control whether
dev_start can be called and eliminate dependency on user invocation order.

The flag stored in "struct rte_eth_dev_data" is more reasonable than
 "enum rte_eth_dev_state". "enum rte_eth_dev_state" is private to the
primary and secondary processes, and can be independently controlled.
However, the secondary process does not make resource allocations and
does not call dev_configure(). These are done by the primary process
and can be obtained or used by the secondary process. So this patch
adds a "dev_configured" flag in "rte_eth_dev_data", like "dev_started".

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
libabigail raised a warning on this change.
This change is fine wrt ABI as far as we understand, but we can't
express an exception rule (see libabigail bug #28060) to waive the
changes only in this part of the rte_eth_dev_data struct.
The solution for now is to globally waive any change on the
rte_eth_dev_data structure.

Signed-off-by: David Marchand <david.marchand@redhat.com>

ipc: stop mp control thread on cleanup

When calling rte_eal_cleanup, the mp channel cleanup routine only sets
mp_fd to -1 leaving the rte_mp_handle control thread running.
This control thread can spew warnings on reading on an invalid fd.
This is especially noticed with ASAN enabled.

To handle this situation, set mp_fd to -1 to signal the control thread
it should exit, but since this thread might be sleeping on the socket,
cancel the thread too.

Fixes: 85d6815fa6d0 ("eal: close multi-process socket during cleanup")
Cc: stable@dpdk.org
Reported-by: Owen Hilyard <ohilyard@iol.unh.edu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

crypto/octeontx2: clear session data upon destroy

During session destroy, clear session private memory.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>

crypto/octeontx2: reset feature flags during config

Feature flags in dev would be updated during config. On reconfigure, the
field need to be set again to original value.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>

crypto/mvsam: fix options parsing

This patch fix the input arguments assignment to the correct
parameters in mrvl_pmd_init_params struct.

Fixes: 25b05a1c806 ("crypto/mvsam: parse max number of sessions")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>

crypto/mvsam: update queue mapping comments

Till now comments explain queue mapping per
one and two crypto devices.
Now added comments for queue mapping for three
crypto devices supported in CN9132.

Signed-off-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>

crypto/mvsam: fix session data reset

This patch fix wrong clear memory session pointer.

When call mrvl_crypto_pmd_sym_session_clear function,
it might cause the following error:
CRYPTODEV: set_sym_session_private_data() line 497:
Set private data for driver 1 not allowed

This fix set zeroes to mrvl_crypto_session pointer instead to
rte_cryptodev_sym_session pointer, and will verify that
rte_cryptodev_sym_session pointer will not lose data such as
nb_drivers.

Bugzilla ID: 646
Fixes: 8a61c83af2fa ("crypto/mrvl: add mrvl crypto driver")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>

crypto/mvsam: fix capabilities

Increased AAD max size up to 64B and allowed AAD increment step
1B according to EIP197 token HW limitation.
In addition, some capabilities were found incorrect due to
running FIPS tests. The patch fix the capabilities.

Fixes: 8a61c83af2f ("crypto/mrvl: add mrvl crypto driver")
Fixes: 2c22aa4f8f6 ("crypto/mvsam: update hash digest sizes")
Fixes: a84226fc055 ("crypto/mvsam: support HMAC SHA224")
Cc: stable@dpdk.org
Signed-off-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Tested-by: Liron Himi <lironh@marvell.com>

crypto/mvsam: fix AES-GCM session parameters

For AEAD session and AES-GCM mode, IV offset will
set to include the Nonce.
In addition, the following operations order will define:
first encryption and then authentication.

Fixes: 8a61c83af2fa ("crypto/mrvl: add mrvl crypto driver")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Tested-by: Liron Himi <lironh@marvell.com>

test/crypto: use formal array size macro

Replaces the use of local ARRAY_SIZE macro, which is not used
anywhere else, with the formal RTE_DIM macro for better
consistency in crypto unit test.

Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: fix typo in ESN case

Fixed typo in the crypto unit test ESN function name by
replacing the word 'encryt' with the correct word 'encrypt'.

test_authenticated_encryt_with_esn is now called
test_authenticated_encrypt_with_esn.

Fixes: 699741912d71 ("test/crypto: add case for auth only trailer")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

test/crypto: fix typo in AES case

Fixed typo in the testcase description for AES in the crypto
unit test suite by changing the word 'Scater' to 'Scatter'.

Fixes: c9c9c4ed8746 ("app/test: check scatter-gather for crypto drivers")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>

test/crypto: rename slave to worker

Modifies the scheduler tests in the crypto unit test suite
to replace the usage of the word 'slave' with the more
appropriate word 'worker'.

The scheduler test functions were modified as follows:
test_scheduler_attach_slave_op is now called
test_scheduler_attach_worker_op,
test_scheduler_detach_slave_op is
test_scheduler_detach_worker_op.

Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: fix autotest function parameters

Fixed parameters on autotest functions by removing comments.

Fixes: 202d375c60bc ("app/test: add cryptodev unit and performance tests")
Fixes: 4ed1e79e7819 ("test/crypto: add tests for virtio-crypto")
Fixes: 3aafc423cf4d ("snow3g: add driver for SNOW 3G library")
Fixes: 27a1c4714d54 ("app/test: add KASUMI crypto")
Fixes: 4c99481f49c4 ("app/test: add ZUC")
Fixes: c8e69fce7046 ("crypto/scheduler: add unit test")
Fixes: ae002048bbea ("test/crypto: add DPAA2 crypto functional test")
Fixes: b674d6d0381a ("test/crypto: add dpaa crypto test cases")
Fixes: a8dbd44d6b4c ("test/crypto: add CAAM JR validation cases")
Fixes: 4868f6591c6f ("test/crypto: add cases for raw datapath API")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/aesni_gcm: fix performance on some AVX512 CPUs

This patch fixes the aesni_gcm performance issue on systems with AVX512
CPU flag presented but with VAES CPU flag missing, such as Skylake.

Fixes: 81fe96a0cece ("crypto/aesni_gcm: use architecture independent API")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

crypto/octeontx: add crypto adapter data path

Added support for crypto adapter OP_FORWARD mode.

As OcteonTx CPT crypto completions could be out of order, each crypto op
is enqueued to CPT, dequeued from CPT and enqueued to SSO one-by-one.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/octeontx: add crypto adapter framework

Set crypto adapter event device slow-path call backs.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

doc: update dependencies for SW crypto PMDs

This patch updates the dependency requirement information
for aesni-gcm, aesni-mb, snow3g, zuc, and kasumi PMDs. Previously
building these PMDs with Make will fail when the system is
installed intel-ipsec-mb library version 1.0 or newer.

Since Make build system is deprecated already, instead of fixing
the issue the documentation is updated to state it.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>

common/cpt: add checks for offset overflow

Add checks to catch overflow of any offsets. Offset control word
specifies,

1. 16 bits encryption offset
2. 8 bits IV offset
3. 8 bits auth offset

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: fix mbuf reset after null check

Use m only after it was checked not to be NULL.

Fixes: 202d375c60bc1 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

app/crypto-perf: fix out-of-place mempool allocation

Add missing rte_mbuf size in mempool allocation for
out-of-place operation.

Fixes: bf9d6702eca9 ("app/crypto-perf: use single mempool")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/qat: fix Arm build with special memcpy

In Arm platform, when "RTE_ARCH_ARM64_MEMCPY" is set as true, gcc will
report variable uninitialized warning:

../drivers/crypto/qat/qat_sym_session.c: In function ‘partial_hash_compute’:
../lib/eal/include/generic/rte_byteorder.h:241:24: warning:
‘<U35a0>’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
241 | #define rte_bswap32(x) __builtin_bswap32(x)
...

This is because "digest" will be initialized by "rte_memcpy" function
rather than "memcpy" if "RTE_ARCH_ARM64_MEMCPY" is set as true.
Furthermore, 'rte_memcpy' will initialize 'digest' with two steps
by invoking rte_mov_x functions. For example:

partial_hash_sha1 -> rte_memcpy -> rte_memcpy_ge16_lt_128 ->
step 1: rte_mov16(dst,src )
step 2: rte_mov16(dst - 16 + n, src - 16 + n)

However, gcc compiler cannot identify this multi-step initialization,
then it will report warning.

To fix this, use "memset" to initialize "digest".

Fixes: cd7fc8a84b48 ("eal/arm64: optimize memcpy")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>

crypto/octeontx: increase metabuf pool

When used with crypto adapter, metabuf pool would be shared across
cores. Account for the same in pool size.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/octeontx2: increase metabuf pool

When used with crypto adapter, metabuf pool would be shared across
cores. Account for the same in pool size.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: add cnxk for asymmetric cases

Registered cn9k and cn10k for asymmetric crypto
autotest. Documentation and release notes are also
updated.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add asymmetric capabilities

Add asymmetric crypto capabilities supported
by cn9k and cn10k PMDs. Documentation is also
updated for the same.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add asymmetric datapath

Add asymmetric crypto datapath for cn9k and cn10k PMD.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add asymmetric session

Add asymmetric crypto session ops for both cn9k
and cn10k PMD.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add security capabilities

Add security capabilities supported by crypto cn10k PMD.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add IPsec datapath

Add rte_security handling in cn10k crypto enqueue
dequeue ops to support IPSec protocol offload.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add security session operations

Add security session ops in cn10k crypto PMD
to support lookaside protocol offload IPsec.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add security context skeleton

Add security ctx in cn10k crypto PMD.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>