Cunming Liang [Tue, 17 Feb 2015 02:08:13 +0000 (10:08 +0800)]
mempool: support non-EAL thread
For non-EAL thread, bypass per lcore cache, directly use ring pool.
It allows using rte_mempool in either EAL thread or any user pthread.
As in non-EAL thread, it directly rely on rte_ring and it's none preemptive.
It doesn't suggest to run multi-pthread/cpu which compete the rte_mempool.
It will get bad performance and has critical risk if scheduling policy is RT.
Haven't found significant performance decrease by mempool_perf_test.
Cunming Liang [Tue, 17 Feb 2015 02:08:16 +0000 (10:08 +0800)]
timer: support non-EAL thread
Allow to setup timers only for EAL (lcore) threads (__lcore_id < MAX_LCORE_ID).
E.g. – dynamically created thread will be able to reset/stop timer for lcore thread,
but it will be not allowed to setup timer for itself or another non-lcore thread.
rte_timer_manage() for non-lcore thread would simply do nothing and return straightway.
Cunming Liang [Tue, 17 Feb 2015 02:08:10 +0000 (10:08 +0800)]
log: support non-EAL thread
For those non-EAL thread, *_lcore_id* is invalid and probably larger than RTE_MAX_LCORE.
The patch adds the check and allows only EAL thread using EAL per thread log level and log type.
Others shares the global log level.
Cunming Liang [Tue, 17 Feb 2015 02:08:11 +0000 (10:08 +0800)]
eal: initialize lcore and socket id
Set _lcore_id and _socket_id to (-1) by default.
For those non EAL thread, _lcore_id shall always be LCORE_ID_ANY.
The libraries using _lcore_id as index need to take care.
_socket_id always be SOCKET_ID_ANY until the thread changes the affinity
by rte_thread_set_affinity().
Cunming Liang [Tue, 17 Feb 2015 02:08:09 +0000 (10:08 +0800)]
malloc: avoid unknown socket id
Add check for rte_socket_id(), avoid get unexpected return like (-1).
By using rte_malloc_socket(), socket id is assigned by socket_arg.
If socket_arg set to SOCKET_ID_ANY, it expects to use the socket id to which the current cores belongs.
As the thread may affinity on a cpuset, the cores in the cpuset may belongs to different NUMA nodes.
The value of _socket_id probably be SOCKET_ID_ANY(-1), the case is not expected in origin malloc_get_numa_socket().
Cunming Liang [Tue, 17 Feb 2015 02:08:03 +0000 (10:08 +0800)]
eal: thread affinity API
1. add two TLS *_socket_id* and *_cpuset*
2. add one internal API, eal_cpu_socket_id/eal_thread_dump_affinity
3. add two public API, rte_thread_set/get_affinity
4. update EAL version map for EAL public API
The API works for both EAL thread and non EAL thread.
When calling rte_thread_set_affinity, the *_socket_id* and
*_cpuset* of calling thread will be updated if the thread
successfully set the cpu affinity.
Cunming Liang [Tue, 17 Feb 2015 02:08:06 +0000 (10:08 +0800)]
eal: get unique thread id
The rte_gettid() wraps the linux and freebsd syscall gettid().
It provides a persistent unique thread id for the calling thread.
It will save the unique id in TLS on the first time.
Cunming Liang [Tue, 17 Feb 2015 02:08:02 +0000 (10:08 +0800)]
eal: get socket id from cpu id
It defines eal_cpu_socket_id() which exposing the origin private cpu_socket_id().
The function is only used inside EAL. It returns socket_id of the specified cpu_id.
Cunming Liang [Tue, 17 Feb 2015 02:08:01 +0000 (10:08 +0800)]
eal: fix strnlen return value with icc
The problem is that strnlen() here may return invalid value with 32bit icc.
(actually it returns it’s second parameter,e.g: sysconf(_SC_ARG_MAX)).
It starts to manifest hwen max_len parameter is > 2M and using icc –m32 –O2 (or above).
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Cunming Liang [Tue, 17 Feb 2015 02:08:00 +0000 (10:08 +0800)]
eal: new option --lcores for cpu assignment
It supports one new eal long option '--lcores' for EAL thread cpuset assignment.
The format pattern:
--lcores='<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores, cpus could be a single digit/range or a group.
'(' and ')' are necessary if it's a group.
If not supply '@cpus', the value of cpus uses the same as lcores.
e.g. '1,2@(5-7),(3-5)@(0,2),(0,6),7-8' means starting 9 EAL thread as below
lcore 0 runs on cpuset 0x41 (cpu 0,6)
lcore 1 runs on cpuset 0x2 (cpu 1)
lcore 2 runs on cpuset 0xe0 (cpu 5,6,7)
lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2)
lcore 6 runs on cpuset 0x41 (cpu 0,6)
lcore 7 runs on cpuset 0x80 (cpu 7)
lcore 8 runs on cpuset 0x100 (cpu 8)
Test report: http://dpdk.org/ml/archives/dev/2015-February/013383.html
Signed-off-by: Cunming Liang <cunming.liang@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Qun Wan <qun.wan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Cunming Liang [Tue, 17 Feb 2015 02:07:58 +0000 (10:07 +0800)]
eal: add cpuset into lcore config
The patch adds 'cpuset' into per-lcore configure 'lcore_config[]',
as the lcore no longer always 1:1 pinning with physical cpu.
The lcore now stands for a EAL thread rather than a logical cpu.
It doesn't change the default behavior of 1:1 mapping, but allows to
affinity the EAL thread to multiple cpus.
Panu Matilainen [Tue, 24 Feb 2015 10:46:56 +0000 (12:46 +0200)]
mk: fix build with Debian/Ubuntu-specific gcc version
Commit 71f0ab1849b4fc3ca928deb566df12ca725ed150 broke compilation
on some versions of Debian and Ubuntu where gcc has been modified
to only emit MAJOR.MINOR part of the version from 'gcc -dumpversion'.
Drop the micro-version from gcc version comparisons to work around
this, it wasn't being used for anything anyway.
Fixes: 71f0ab1849b4 ("mk: rework gcc version detection to permit versions newer than 4.x") Signed-off-by: Panu Matilainen <pmatilai@redhat.com> Acked-by: David Marchand <david.marchand@6wind.com>
Thomas Monjalon [Thu, 29 Jan 2015 16:51:17 +0000 (17:51 +0100)]
eal: add help option
Help is printed with -h or --help.
Help is also printed for an unknown option.
This was broken since the rework of options.
Fixes: 489a9d6c9f77 ("merge bsd and linux common options parsing") Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: David Marchand <david.marchand@6wind.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
Thomas Monjalon [Thu, 29 Jan 2015 16:42:31 +0000 (17:42 +0100)]
eal: sort and align options lists
Options listing in usage help was a mess.
The main usage line is fixed and shorter.
The options in usage output are logically sorted (cpu/mem/dev/proc),
aligned and lightly reworded.
The options in declarations are alphabetically sorted.
Code in swith statement is not moved.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: David Marchand <david.marchand@6wind.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: David Marchand <david.marchand@6wind.com>
Device driver should log via DPDK log, not to printf which is
sends to /dev/null in a daemon application.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: include rte_log.h] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Panu Matilainen [Mon, 23 Feb 2015 14:53:56 +0000 (16:53 +0200)]
mk: rework gcc version detection to permit versions newer than 4.x
Separately comparing major and minor versions becomes seriously clumsy
when with major version changes, convert the entire version string into
a numeric value (ie 4.6.0 becomes 460 and 5.0.0 becomes 500) and use
that for comparisons, eliminate unnecessary negations while at it.
This makes the comparisons simpler, more obvious and makes gcc 5.0
naturally recognized at least as capable as newest 4.x.
This three-digit scheme would run into trouble if gcc ever went to
two-digit version segments, but that hasn't happened in the last 10+
years so it seems like a safe assumption.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jeff Shaw [Wed, 18 Feb 2015 18:07:40 +0000 (10:07 -0800)]
fm10k: fix build with unused debug function
This commit fixes the following error which was reported when
compiling with clang by moving the function inside an
RTE_LIBRTE_FM10K_DEBUG_RX ifdef block.
error: unused function 'dump_rxd'
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com> Acked-by: Keith Wiles <keith.wiles@intel.com>
examples/packet_ordering: move creation of reorder buffer
There was no error checking after calling rte_reorder_create.
Move the creation of the reorder buffer before launching threads
in case of memory error.
The current implementation of rte_kni_rx_burst polls the fifo for buffers.
Irrespective of success or failure, it allocates the mbuf and try to put them into the alloc_q
if the buffers are not added to alloc_q, it frees them.
This waste lots of cpu cycles in allocating and freeing the buffers if alloc_q is full.
The logic has been changed to:
1. Initially allocand add buffer(burstsize) to alloc_q
2. Add buffers to alloc_q only when you are pulling out the buffers.
Signed-off-by: Hemant Agrawal <hemant@freescale.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com>
Huawei Xie [Mon, 23 Feb 2015 17:36:33 +0000 (17:36 +0000)]
vhost: support dynamically registering server
* support calling rte_vhost_driver_register after rte_vhost_driver_session_start
* add mutext to protect fdset from concurrent access
* add busy flag in fdentry. this flag is set before cb and cleared after cb is finished.
mutex lock scenario in vhost:
* event_dispatch(in rte_vhost_driver_session_start) runs in a separate thread, infinitely
processing vhost messages through cb(callback).
* event_dispatch acquires the lock, get the cb and its context, mark the busy flag,
and releases the mutex.
* vserver_new_vq_conn cb calls fdset_add, which acquires the mutex and add new fd into fdset.
* vserver_message_handler cb frees data context, marks remove flag to request to delete
connfd(connection fd) from fdset.
* after cb returns, event_dispatch
1. clears busy flag.
2. if there is remove request, call fdset_del, which acquires mutex, checks busy flag, and
removes connfd from fdset.
* rte_vhost_driver_unregister(not implemented) runs in another thread, acquires the mutex,
calls fdset_del to remove fd(listenerfd) from fdset. Then it could free data context.
The above steps ensures fd data context isn't freed when cb is using.
VM(s) should have been shutdown before rte_vhost_driver_unregister.
Huawei Xie [Mon, 23 Feb 2015 17:36:31 +0000 (17:36 +0000)]
vhost: support vhost-user
In rte_vhost_driver_register(), vhost unix domain socket listener fd is created
and added to polled(based on select) fdset.
In rte_vhost_driver_session_start(), fds in the fdset are checked for
processing. If there is new connection from qemu, connection fd accepted is
added to polled fdset. The listener and connection fds in the fdset are
then both checked. When there is message on the connection fd, its
callback vserver_message_handler is called to process vhost-user messages.
To support identifying which virtio is from which guest VM, we could call
rte_vhost_driver_register with different socket path. Virtio devices from
same VM will connect to VM specific socket. The socket path information is
stored in the virtio_net structure.
Huawei Xie [Mon, 23 Feb 2015 17:36:24 +0000 (17:36 +0000)]
vhost: move cuse related handling in a subdirectory
Create vhost_cuse directory and move vhost-net-cdev.c into vhost_cuse.
vhost-cuse driver will be divided into two parts: cuse driver specific message
handling(in cuse directory) and common message handling(in virtio-net.c).
vhost ioctl message is pre-processed in cuse and then sent to virtio-net
if is not terminated.
virtio-net.c provides common message handling for both vhost-cuse and vhost-user.
Bruce Richardson [Mon, 23 Feb 2015 18:30:10 +0000 (18:30 +0000)]
examples/rxtx_callbacks: show use of callbacks
Example showing how callbacks can be used to insert a timestamp
into each packet on RX. On TX the timestamp is used to calculate
the packet latency through the app, in cycles.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
Bruce Richardson [Mon, 23 Feb 2015 18:30:09 +0000 (18:30 +0000)]
ethdev: support optional Rx and Tx callbacks
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bruce Richardson [Mon, 23 Feb 2015 18:30:08 +0000 (18:30 +0000)]
ethdev: rename interrupt callbacks field
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jingjing Wu [Thu, 29 Jan 2015 01:41:55 +0000 (09:41 +0800)]
i40e: enable internal switch of PF
This patch enables PF's internal switch by setting ALLOWLOOPBACK
flag when VEB is created. With this patch, traffic from PF can be
switched on the VEB.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/013237.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Tested-by: Min Cao <min.cao@intel.com>
Jingjing Wu [Thu, 29 Jan 2015 01:41:54 +0000 (09:41 +0800)]
i40e: fix vsi configuration
In i40e_vsi_config_tc_queue_mapping, should add a flag to indicate
another valid setting by OR operation, but not set this flag to
valid_sections, otherwise it will overwrite the flags set before.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/013237.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Tested-by: Min Cao <min.cao@intel.com>
Helin Zhang [Mon, 29 Dec 2014 01:41:28 +0000 (09:41 +0800)]
i40e: workaround for XL710 performance
On XL710, performance number is far from the expectation on recent
firmware versions, if promiscuous mode is disabled, or promiscuous
mode is enabled and port MAC address is equal to the packet
destination MAC address. The fix for this issue may not be
integrated in the following firmware version. So the workaround in
software driver is needed. For XL710, it needs to modify the initial
values of 3 internal only registers, which are the same as X710.
Note that the values for X710 and XL710 registers could be different,
and the workaround can be removed when it is fixed in firmware in
the future.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/012749.html
Dan Aloni [Wed, 28 Jan 2015 22:04:53 +0000 (00:04 +0200)]
eal/linux: allow to map BARs with MSI-X tables
While VFIO doesn't allow us to map complete BARs with MSI-X tables,
it does allow us to map around them in PAGE_SIZE granularity. There
might be adapters that provide their registers in the same BAR
but on a different page. For example, Intel's NVME adapter, though
not a network adapter, provides only one MMIO BAR that contains
the MSI-X table.
Signed-off-by: Dan Aloni <dan@kernelim.com> Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently for mbufs with refcnt, we cannot free mbufs with external memory
buffers (ie. vhost zero copy), as they are recognized as indirect
attached mbufs and therefore we free the direct mbuf it points to,
resulting in an error in the case of external memory buffers.
We solve the issue by introducing the IND_ATTACHED_MBUF flag, which indicates
that the mbuf is an indirect attached mbuf pointing to another mbuf.
When we free an mbuf, we only free the direct mbuf if the flag is set.
Freeing an mbuf with external buffer is the same as freeing a non attached mbuf.
The flag is set during attach and clear on detach.
So in the case of vhost zero copy where we have mbufs with external
buffers, by default we just free the mbuf and it is up to the user to deal with
the external buffer.
This patch would allow the removal of the RTE_MBUF_REFCNT config option,
setting refcnt for all mbufs permanently.
The patch also modifies the vhost example as it was using the
RTE_MBUF_INDIRECT macro to detect if it was an mbuf with external buffer.
Marc Sune [Fri, 13 Feb 2015 14:25:25 +0000 (15:25 +0100)]
kni: add build option to disable preempting
This patch introduces CONFIG_RTE_KNI_PREEMPT_DEFAULT flag. When set to 'no',
KNI kernel thread(s) do not call schedule_timeout_interruptible(), which
improves overall KNI performance at the expense of CPU cycles (polling).
Default values is 'yes', maintaining the same behaviour as of now.
Signed-off-by: Marc Sune <marc.sune@bisdn.de> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Since rte_hash_crc() can now be run regardless of SSE4.2 support,
we can safely remove compile checks for RTE_MACHINE_CPUFLAG_SSE4_2
in test utilities.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Calculating hash for data of variable length is more efficient
when that data is sliced into 8-byte pieces. The rest part of data
is hashed using CRC32 functions with either 8 and 4 byte operands.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
hash: add assembly implementation of CRC32 intrinsics
Added:
- crc32c_sse42_u32() emits 'crc32l' asm instruction;
- crc32c_sse42_u64() emits 'crc32q' asm instruction;
- crc32c_sse42_u64_mimic(), wrapper in case of run on 32-bit platform.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Jijiang Liu [Fri, 20 Feb 2015 17:01:45 +0000 (17:01 +0000)]
i40e: support NVGRE in Rx tunnel filtering
The filter types supported are listed below for NVGRE packet:
1. Inner MAC and Inner VLAN ID.
2. Inner MAC address, inner VLAN ID and tenant ID.
3. Inner MAC and tenant ID.
4. Inner MAC address.
5. Outer MAC address, tenant ID and inner MAC address.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com> Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Helin Zhang [Wed, 4 Feb 2015 07:16:33 +0000 (15:16 +0800)]
app/testpmd: support new rss offloads
RSS offloads supported 'ip' and 'udp' only, which did not demonstrate
all of the hardware capabilities. The modifications adds support of
new RSS offloads of 'tcp', 'sctp', 'ether' and 'all'.
Helin Zhang [Wed, 4 Feb 2015 07:16:32 +0000 (15:16 +0800)]
ethdev: unification of RSS offload types
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Helin Zhang [Wed, 4 Feb 2015 07:16:31 +0000 (15:16 +0800)]
ethdev: unification of flow types
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Helin Zhang [Wed, 4 Feb 2015 07:16:30 +0000 (15:16 +0800)]
ethdev: fix size of flow type mask array
It wrongly calculates the size of the flow type mask array. The fix
is to align the flow type maximum index ID with the number of
element bit width, and then divide the number of element bit width.
Jingjing Wu [Tue, 10 Feb 2015 04:48:32 +0000 (12:48 +0800)]
ethdev: remove old ntuple filter API
Following structures are removed:
- rte_2tuple_filter
- rte_5tuple_filter
Following APIs are removed:
- rte_eth_dev_add_2tuple_filter
- rte_eth_dev_remove_2tuple_filter
- rte_eth_dev_get_2tuple_filter
- rte_eth_dev_add_5tuple_filter
- rte_eth_dev_remove_5tuple_filter
- rte_eth_dev_get_5tuple_filter
It also move macros TCP_*_FLAG to rte_eth_ctrl.h, and removes the macro
TCP_UGR_FLAG which is duplicated with TCP_URG_FLAG.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove also from version map]
Jingjing Wu [Tue, 10 Feb 2015 04:48:29 +0000 (12:48 +0800)]
ixgbe: migrate ntuple filter to new API
This patch defines new functions dealing with ntuple filters which is
corresponding to 5tuple in HW.
It removes old functions which deal with 5tuple filters.
Ntuple filter is dealt with through entrance ixgbe_dev_filter_ctrl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Jingjing Wu [Tue, 10 Feb 2015 04:48:30 +0000 (12:48 +0800)]
igb: migrate ntuple filter to new API
This patch defines new functions dealing with ntuple filters which is
corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple
filter for 82576 in HW.
It removes old functions which deal with 2tuple and 5tuple filters in igb driver.
Ntuple filter is dealt with through entrance eth_igb_filter_ctrl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Jingjing Wu [Tue, 10 Feb 2015 04:48:28 +0000 (12:48 +0800)]
ethdev: new ntuple filter API
This patch defines ntuple filter type RTE_ETH_FILTER_NTUPLE and its structure rte_eth_ntuple_filter.
It also corrects the typo TCP_UGR_FLAG to TCP_URG_FLAG
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Jingjing Wu [Wed, 11 Feb 2015 07:51:49 +0000 (15:51 +0800)]
ethdev: remove old syn filter API
Structure rte_syn_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_syn_filter
- rte_eth_dev_remove_syn_filter
- rte_eth_dev_get_syn_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
Jingjing Wu [Wed, 11 Feb 2015 07:51:48 +0000 (15:51 +0800)]
app/testpmd: new commands for syn filter
Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Jingjing Wu [Wed, 11 Feb 2015 07:51:46 +0000 (15:51 +0800)]
ixgbe: migrate syn filter to new API
This patch defines new functions dealing with syn filter.
It removes old functions which deal with syn filter.
Syn filter is dealt with through entrance ixgbe_dev_filter_ctrl.
Jingjing Wu [Wed, 11 Feb 2015 07:51:47 +0000 (15:51 +0800)]
igb: migrate syn filter to new API
This patch defines new functions dealing with syn filter.
It removes old functions of syn filter in igb driver.
Syn filter is dealt with through entrance eth_igb_filter_ctrl.
Jingjing Wu [Sat, 21 Feb 2015 01:53:10 +0000 (01:53 +0000)]
ethdev: remove old flex filter API
Structure rte_flex_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_flex_filter
- rte_eth_dev_remove_flex_filter
- rte_eth_dev_get_flex_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
Jingjing Wu [Sat, 21 Feb 2015 01:53:09 +0000 (01:53 +0000)]
app/testpmd: new commands for flex filter
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Jingjing Wu [Sat, 21 Feb 2015 01:53:08 +0000 (01:53 +0000)]
igb: migrate flex filter to new API
This patch defines new functions dealing with flex filter.
It removes old functions of flex filter in igb driver.
Syn filter is dealt with through entrance eth_igb_filter_ctrl.
Jingjing Wu [Thu, 29 Jan 2015 05:29:18 +0000 (13:29 +0800)]
ixgbe: support new flow director masks
This patch implement the mask configuration of flow director filter,
by using the mask defined in rte_fdir_conf instead of callback function
fdir_set_masks.
git.droids-corp.org / dpdk.git / log