We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.
Make a few updates in preparation for 18.08.
- Use SPDX
- Add 1400 series VIC adapters to supported models
- Describe the VXLAN port number
- Expand the description for ig-vlan-rewrite
- Add inner RSS and checksum to the features
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com> Reviewed-by: John Daley <johndale@cisco.com>
Xiaoyun Li [Thu, 12 Jul 2018 07:55:46 +0000 (15:55 +0800)]
app/testpmd: fix little performance drop
There is about 3% perf drop. And it is because of a bitrate
calculation in the datapath. So improve it by maintaining an array
of port indexes in testpmd, which is updated with ethdev events.
Fixes: 8728ccf37615 ("fix ethdev ports enumeration") Cc: stable@dpdk.org Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Ori Kam <orika@mellanox.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com> Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Ori Kam <orika@mellanox.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com> Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
net/i40e: fix check of flow director programming status
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Xiaoyun Li [Tue, 10 Jul 2018 09:30:54 +0000 (17:30 +0800)]
net/i40e: fix link speed
When link needs to go up, I40E_AQ_PHY_AN_ENABLED is always be set in DPDK.
So all speeds are always set. This causes speed config never works.
This patch fixes this issue and only allows to set available speeds. If
link needs to go up and speed setting is not supported, it will print
warning and set default available speeds. And when link needs to go down,
link speed field should be set to non-zero to avoid link down issue when
binding back to kernel driver.
Fixes: ca7e599d4506 ("net/i40e: fix link management") Fixes: 1bb8f661168d ("net/i40e: fix link down and negotiation") Cc: stable@dpdk.org Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Shaopeng He [Tue, 10 Jul 2018 10:37:27 +0000 (06:37 -0400)]
net/i40e: fix Tx queue setup after stop
Currently, i40e_dev_tx_queue_setup_runtime checks simple tx and treats
mbuf fast free offloading as No-simple, which is classified as simple tx
in i40e_set_tx_function_flag. This inconsistent behavior causes tx queue
setup fail after queue was stopped. This patch fixes this bug.
Fixes: 399421100e08 ("net/i40e: fix missing mbuf fast free offload") Cc: stable@dpdk.org Signed-off-by: Shaopeng He <shaopeng.he@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TPID can be set by set_switch_config AdminQ command on
new FW release. But find fail to set 0x88A8 on some NICs.
According to the datasheet, Switch Tag value should not
be identical to either the First Tag or Second Tag values.
So set something other than common Ethertype for internal
switching.
Fixes: 73cd7d6dc8e1 ("net/i40e: use set switch AQ instead of register setting") Cc: stable@dpdk.org Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To parse packet type correctly, profile needs to be
loaded again to update tables in SW even if profile
has exited. But previously packet type parser will
be false after loading profile when profile already
exists.
This patch fixes the issue.
Currently, VFIO will try to map around MSI-X table in the BARs. When
MSI-X table (page-aligned) size is equal to (page-aligned) size of BAR,
VFIO will just skip the BAR.
Recent kernel versions will allow VFIO to map the entire BAR containing
MSI-X tables (*), so instead of trying to map around the MSI-X vector
or skipping the BAR entirely if it's not possible, we can now try
mapping the entire BAR first. If mapping the entire BAR doesn't
succeed, fall back to the old behavior of mapping around MSI-X table or
skipping the BAR.
A few regressions with virtio/vhost have been discovered, due to the
strong dependency of virtio/vhost on the underlying memory layout.
Specifically, virtio/vhost share all memory pages starting from the
beginning of the segment, while the patch below made it so that the
memory is always allocated from the top of VA space, not from the
bottom.
Fixes: 179f916e88e4 ("mem: allocate in reverse to reduce fragmentation") Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Bruce Richardson [Fri, 20 Jul 2018 14:13:10 +0000 (15:13 +0100)]
eal: fix error message for unsupported platforms
When building with meson on e.g. cygwin, the error message about an
unsupported platform referenced an unknown variable since
"host_machine" was missing an "_".
Fixes: 844514c73569 ("eal: build with meson") Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Bruce Richardson [Thu, 19 Jul 2018 14:26:48 +0000 (15:26 +0100)]
kvargs: fix building with meson outside source tree
When building DPDK with meson with the <builddir> being outside the source
directory, an error was generated as the path to the EAL headers was not
found. The path specified for the includes backed out unnecessarily far and
so broke when the build directory was not in the expected location of
just inside the source dir. Changing the path to be shorter, just going
down one level and then into EAL builds for both cases - where builddir is
in source directory, and also when it's outside it.
Fixes: 092ee516496d ("kvargs: build before EAL") Reported-by: Anatoly Burakov <anatoly.burakov@intel.com> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Bruce Richardson [Thu, 19 Jul 2018 14:22:06 +0000 (15:22 +0100)]
build: remove duplicate checks for cflags
There is no need to check for each library, driver and example whether
certain cflags are supported. Instead of checking inside the loop, do
so outside and reuse the value.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Bruce Richardson [Fri, 20 Jul 2018 13:28:25 +0000 (14:28 +0100)]
build: improve error message for missing dependency
When building a driver or library and a required internal dependency
is missing, the error message printed was:
Tried to get unknown variable "shared_rte_<libname>".
However, a better way to handle this is to catch the missing variable
earlier and convert it into a proper message, informing the user
that the required dependency is missing, and most importantly, what
library or driver wanted that dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Bruce Richardson [Fri, 20 Jul 2018 13:53:36 +0000 (14:53 +0100)]
build: fix meson build on FreeBSD
A number of drivers have dependencies on libraries which
are only built on Linux, and so they need to be disabled
on FreeBSD. Rather than basing the disabling on OS, in
each case we base the building of the library on the
presence of the required dependency.
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Add initial PMD setup routines in compressdev
framework. ZLIB PMD appears as virtual compression
device. User would need to install zlib prior to
enabling this PMD.
Pablo de Lara [Thu, 19 Jul 2018 09:05:56 +0000 (10:05 +0100)]
crypto/virtio: fix memory leak
Put session private data back to mempool when clearing
a crypto session, which is expected to be done in the PMD.
Fixes: b7fa78c7d3b0 ("crypto/virtio: support session related ops") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Jay Zhou <jianjay.zhou@huawei.com>
Added extra case to support 8 byte key size
for 3DES CBC. Also changed capabilities to reflect
the change.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Marko Kovacevic [Fri, 8 Jun 2018 09:10:01 +0000 (10:10 +0100)]
crypto/aesni_mb: support 3DES
Added support for 3DES cipher algorithm which
will support 8, 16 and 24 byte keys, which also has been
added in the v0.50 of the IPSec Multi-buffer lib.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Pablo de Lara [Tue, 3 Jul 2018 08:22:34 +0000 (09:22 +0100)]
crypto/aesni_mb: support IPsec Multi-buffer lib v0.50
Adds support for the v0.50 of the IPsec Multi-buffer lib.
The library now exposes its version, with the idea
of maintaining backwards compatibility in the future,
avoiding breaking the compilation of the PMD every time
there is a new version available.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Pablo de Lara [Tue, 3 Jul 2018 08:22:22 +0000 (09:22 +0100)]
crypto/aesni_gcm: support IPsec Multi-buffer lib v0.50
Adds support for the v0.50 of the IPsec Multi-buffer lib.
The library now exposes its version, with the idea
of maintaining backwards compatibility in the future,
avoiding breaking the compilation of the PMD every time
there is a new version available.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Pablo de Lara [Tue, 3 Jul 2018 05:58:01 +0000 (06:58 +0100)]
crypto/aesni_mb: call buffer manager allocation
Instead of having a static field for the buffer manager
MB_MGR in the queue pair structure, use the provided API
that allocates memory for it and store a pointer to it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some PMDs may have a limitation on the number of segments
in an SGL mbuf that they can process.
Thefore, an upper limit is set to avoid having
an indeterminate number of segments.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Now that device capabilities are checked separately,
before setting the xform parameters, it is not required
to do the check again, leaving only the xform setting
with the device configuration.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Pablo de Lara [Thu, 19 Jul 2018 08:39:58 +0000 (09:39 +0100)]
examples/l2fwd-crypto: fix session mempool size
The session mempool size for this application depends
on the number of crypto devices that are capable
of performing the operation given by the parameters on the app.
However, previously this calculation was done before all devices
were checked, resulting in an incorrect number of sessions
required.
Now the calculation of the devices to be used is done first
(checking the capabilities of the enabled devices),
followed by the creation of the session pool, resulting
in a correct number of objects needed for the sessions
to be created.
Fixes: e3bcb99a5e13 ("examples/l2fwd-crypto: limit number of sessions") Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Pablo de Lara [Thu, 19 Jul 2018 08:39:56 +0000 (09:39 +0100)]
examples/l2fwd-crypto: skip device not supporting operation
When a crypto device does not support an algorithm, it is skipped
and not used. However, when it does support it, but not the rest
of the parameters (IV, key, AAD sizes...), application stops.
Instead, the device should be skipped and the search of a suitable
device should continue.
Fixes: a061e50a0d97 ("examples/l2fwd-crypto: fix ambiguous input key size") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Pablo de Lara [Mon, 16 Jul 2018 08:26:16 +0000 (09:26 +0100)]
examples/l2fwd-crypto: fix digest with AEAD algo
When performing authentication verification (both for AEAD algorithms,
such as AES-GCM, or for authentication algorithms, such as SHA1-HMAC),
the digest address is calculated based on the packet size and the
algorithm used (substracting digest size and IP header to the packet size).
However, for AEAD algorithms, this was not calculated correctly,
since the digest size was not being substracted.
Radu Nicolau [Mon, 16 Jul 2018 11:14:16 +0000 (12:14 +0100)]
app/crypto-perf: fix mempool creation
Using a small number of sessions results in rte_mempool_create call
with cache_size > n, which fails. There is no need to cache the elements,
as there is no performance impact.
Fixes: 501c0a3b14c3 ("app/crypto-perf: limit number of sessions") Signed-off-by: Radu Nicolau <radu.nicolau@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Pablo de Lara [Wed, 11 Jul 2018 06:38:46 +0000 (07:38 +0100)]
compress/isal: fix memory leak
Processed operations ring is created for each queue pair,
but it was not being freed when the queue pair was released.
Fixes: b0e23c458a6f ("compress/isal: add queue pair related ops") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Lee Daly <lee.daly@intel.com>
Pablo de Lara [Wed, 11 Jul 2018 06:38:45 +0000 (07:38 +0100)]
compress/isal: set null pointer after freeing
Fixes: b0e23c458a6f ("compress/isal: add queue pair related ops") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Lee Daly <lee.daly@intel.com>
Pablo de Lara [Wed, 11 Jul 2018 06:38:44 +0000 (07:38 +0100)]
compress/isal: fix log type name
There is a naming convention for logtypes of PMDs:
"pmd.driverType.driverName".
Therefore, the logtype for ISA-L PMD should be "pmd.compress.isal".
Fixes: 490e725b95b2 ("compress/isal: add device init and de-init") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Acked-by: Lee Daly <lee.daly@intel.com>
Lee Daly [Wed, 11 Jul 2018 14:21:45 +0000 (15:21 +0100)]
compress/isal: fix offset usage
This patch allows the ISA-L compression PMD,
to be used with offsets in the mbuf.
Offsets can now be used for source and destination buffers,
during compression or decompression.
Fixes: 7bf4f0630af6 ("compress/isal: add ISA-L decomp functionality") Fixes: dc49e6aa4879 ("compress/isal: add ISA-L compression functionality") Cc: stable@dpdk.org Signed-off-by: Lee Daly <lee.daly@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
QAT driver checks byte alignment for KASUMI/SNOW 3G/ZUC algorithms using
cipher/auth_param, which are not initialized at this moment yet. Use
operation params instead.
Fixes: 39e0bee48e81 ("crypto/qat: rework request builder for performance") Cc: stable@dpdk.org Reported-by: Dmitry Eremin-Solenikov <dmitry.ereminsolenikov@linaro.org> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For ESP transport and BYPASS mode the app might generate output
packets with invalid IPv4 header checksum.
At least such behavior was observed on few Intel NICs.
The reason is that the app didn't set ipv4 header checksum to zero
before passing it to the HW.
Fixes: 906257e965b7 ("examples/ipsec-secgw: support IPv6") Cc: stable@dpdk.org Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Extend QAT guide to cover crypto and compression and common
information, particularly about kernel driver dependency.
Update release note.
Update compression feature list for qat.
Previous check only causes op to fail on dequeue.
This extends so once first fail is detected, application can
no longer enqueue ops to the device and will also get an
appropriate error if trying to reconfigure or setup the device.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Now that all the device operations are available,
add the functions to create and destroy the pmd.
Called on probe and remove of the qat pci device, these
register the device with the compressdev API
and plug in all the device functionality.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Add Makefiles, meson files, and empty source files for compression PMD.
Handle cases for building either symmetric crypto PMD
or compression PMD or both and the common files both depend on.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
David Hunt [Fri, 13 Jul 2018 14:23:01 +0000 (15:23 +0100)]
examples/vm_power: add options to guest app
Add new command line arguments to the guest app to make
testing and validation of the policy usage easier.
These arguments are mainly around setting up the power
management policy that is sent from the guest vm to
to the vm_power_manager in the host
New command line parameters:
-n or --vm-name
sets the name of the vm to be used by the host OS.
-b or --busy-hours
sets the list of hours that are predicted to be busy
-q or --quiet-hours
sets the list of hours that are predicted to be quiet
-l or --vcpu-list
sets the list of vcpus to monitor
-p or --port-list
sets the list of posts to monitor when using a
workload policy.
-o or --policy
sets the default policy type
TIME
WORKLOAD
TRAFFIC
BRANCH_RATIO
The format of the hours or list paramers is a comma-separated
list of integers, which can take the form of
a. x e.g. --vcpu-list=1
b. x,y e.g. --quiet-hours=3,4
c. x-y e.g. --busy-hours=9-12
d. combination of above (e.g. --busy-hours=4,5-7,9)
Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
David Hunt [Fri, 13 Jul 2018 14:23:00 +0000 (15:23 +0100)]
examples/vm_power: add branch ratio policy type
Add the capability for the vm_power_manager to receive
a policy of type BRANCH_RATIO. This will add any vcpus
in the policy to the oob monitoring thread.
Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
David Hunt [Fri, 13 Jul 2018 14:22:57 +0000 (15:22 +0100)]
examples/vm_power: allow greater than 64 cores
To facilitate more info per core, change the global_cpu_mask
from a uint64_t to an array. This also removes the limit on
64 cores, allocing the aray at run-time based on the number of
cores found in the system.
Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
David Hunt [Fri, 13 Jul 2018 14:22:56 +0000 (15:22 +0100)]
examples/vm_power: add oob monitoring functions
This patch introduces the out-of-band (oob) core monitoring
functions.
The functions are similar to the channel manager functions.
There are function to add and remove cores from the
list of cores being monitored. There is a function to initialise
the monitor setup, run the monitor thread, and exit the monitor.
The monitor thread runs in it's own lcore, and is separate
functionality to the channel monitor which is epoll based.
THis thread is timer based. It loops through all monitored cores,
calculates the branch ratio, scales up or down the core, then
sleeps for an interval (~250 uS).
The method it uses to read the branch counters is a pread on the
/dev/cpu/x/msr file, so the 'msr' kernel module needs to be loaded.
Also, since the msr.h file has been made unavailable in recent
kernels, we have #defines for the relevant MSRs included in the
code.
The makefile has a switch for x86 and non-x86 platforms,
and compiles stub function for non-x86 platforms.
Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
David Hunt [Fri, 13 Jul 2018 14:22:55 +0000 (15:22 +0100)]
examples/vm_power: add core list parameter
Add in the '-l' command line parameter (also --core-list)
So the user can now pass --corelist=4,6,8-10 and it will
expand out to 4,6,8,9,10 using the parse function provided
in parse.c (parse_set).
This list of cores is then used to enable out-of-band monitoring
to scale up and down these cores based on the ratio of branch
hits versus branch misses. The ratio will be low when a poll
loop is spinning with no packets being received, so the frequency
will be scaled down.
Also , as part of this change, we introduce a core_info struct
which keeps information on each core in the system, and whether
we're doing out of band monitoring on them.
Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Thomas Monjalon [Fri, 20 Jul 2018 11:34:52 +0000 (13:34 +0200)]
devtools: fix checkpatch for filename with space
If the patch filename or the temporary file path have a space
in their name, the script checkpatches.sh does not work.
The variables for the filenames must be enclosed in quotes
in order to preserve spaces.
Fixes: 4bec48184e33 ("devtools: add checks for ABI symbol addition") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Neil Horman <nhorman@tuxdriver.com>
Clear vfio_group_fd is not necessary to involve any IPC.
Also, current IPC implementation for SOCKET_CLR_GROUP is not
correct. rte_vfio_clear_group on secondary will always fail,
that prevent device be detached correctly on a secondary process.
The patch simply removes all IPC related stuff in
rte_vfio_clear_group.
Subroutine to unmap VFIO resource is shared by secondary and
primary, and it does not work on the secondary process. Since
for secondary process, it is not necessary to close interrupt
handler, set pci bus mastering and remove vfio_res from
vfio_res_list. So, the patch adds a dedicate function to handle
the situation when a device is unmapped on a secondary process.
When use memcmp to compare two PCI address, sizeof(struct rte_pci_addr)
is 4 bytes aligned, and it is 8. While only 7 byte of struct rte_pci_addr
is valid. So compare the 8th byte will cause the unexpected result, which
happens when repeatedly attach/detach a device.
If hotplug add an already plugged PCI device, it will
cause rte_pci_device->device.name be corrupted due to unexpected
rte_devargs_remove. Also if try to hotplug remove an already
unplugged device, it will cause segment fault due to unexpected
bus->unplug on a rte_device whose driver is NULL.
The patch fix these issues.
Thomas Monjalon [Wed, 18 Jul 2018 21:26:58 +0000 (23:26 +0200)]
devtools: fix symbol check for filename with space
If the patch filename or the temporary file path have a space
in their name, the script check-symbol-change.sh does not work.
The variables for the filenames must be enclosed in quotes
in order to preserve spaces.
Fixes: 4bec48184e33 ("devtools: add checks for ABI symbol addition") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Neil Horman <nhorman@tuxdriver.com>
git.droids-corp.org / dpdk.git / log