doc: fix limitations for dpaa crypto

Fixes: a74af788c632 ("crypto/dpaa_sec: support scatter gather")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/aesni_gcm: add dynamic logging

Registered new dynamic logtype for driver and
replaced GCM_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_GCM_LOG macro, which uses the new logtype.

Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/zuc: add dynamic logging

Registered new dynamic logtype for driver and
replaced ZUC_LOG_ERR and CDEV_LOG_ERR
with the new ZUC_LOG macro, which uses the new logtype.

Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/kasumi: add dynamic logging

Registered new dynamic logtype for driver and
replaced KASUMI_LOG_ERR and CDEV_LOG_ERR
with the new KASUMI_LOG macro, which uses the new logtype.

Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/aesni_mb: add dynamic logging

Registered new dynamic logtype for driver and
replaced MB_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_MB_LOG macro, which uses the new logtype.

Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/null: add dynamic logging

Registered new dynamic logtype for driver and
replaced NULL_CRYPTO_LOG_ERR and CDEV_LOG_ERR
with the new NULL_LOG macro, which uses the new logtype.

Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/openssl: add dynamic logging

Registered new dynamic logtype for driver and
replaced OPENSSL_LOG_ERR and CDEV_LOG_ERR macros with
new OPENSSL_LOG macro, which uses the new logtype.

Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/scheduler: add dynamic logging

Registered new dynamic logtype for driver and
replaced CS_LOG_ERR and RTE_LOG macros with
new CR_SCHED macro, which uses the new logtype.

Signed-off-by: Hari Kumar <hari.kumarx.vemula@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

cryptodev: remove debug compilation option

For cryptodev dynamic logging, conditional compilation of
debug logs is not actually required.

Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/qat: move common qat files to common dir

-  moved common qat files to common/qat dir.
  -  changed common/qat/Makefile, common/qat/meson.build,
     drivers/Makefile, crypto/Makefile
     to add possibility of using new files locations
  -  added README file into crypto/qat to clarify where
     the build is made from
  -  updated MAINTAINERS file

Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

crypto/qat: re-organise build file content

This patch groups sources and related dependencies into
common and sym sections in build files.

Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

crypto/qat: add weak functions

This patch adds following weak functions to facilitate conditional
compilation of code for those services:
  -  qat_sym_dev_create
  -  qat_asym_dev_create
  -  qat_comp_dev_create
  -  qat_sym_dev_destroy
  -  qat_asym_dev_destroy
  -  qat_comp_dev_destroy
and removes unused files with empty definitions of above functions.

Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

vhost: add notification for packed ring

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add Tx support for packed ring

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add Rx support for packed ring

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add vector filling support for packed ring

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: create descriptor mapping function

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add shadow used ring support for packed rings

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: append shadow used ring function names with split

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: extract split ring handling from Rx and Tx functions

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: clear batch copy index at copy time

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: make indirect desc table copy desc type agnostic

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: clear shadow used table index at flush time

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add vring address setup for packed queues

Add code to set up packed queues when enabled.

Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add helpers for packed virtqueues

Add some helper functions to check descriptor flags
and check if a vring is of type packed.

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: add virtio packed virtqueue defines

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: improve prefetching in enqueue path

This is an optimization to prefetch next buffer while the
current one is being processed.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: prefetch first descriptor in dequeue path

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: improve prefetching in dequeue path

This is an optimization to prefetch next buffer while the
current one is being processed.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: use buffer vectors in dequeue path

To ease packed ring layout integration, this patch makes
the dequeue path to re-use buffer vectors implemented for
enqueue path.

Doing this, copy_desc_to_mbuf() is now ring layout type
agnostic.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: use shadow used ring in dequeue path

Relax used ring contention by reusing the shadow used
ring feature used by enqueue path.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>

doc: update CRC feature with new offload flag

Fixes: 3d12dceed2df ("ethdev: add new offload flag to keep CRC")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

examples: fix RSS hash function configuration

ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware

This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.

Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.

Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

net/bonding: do not clear active slave count

When the bond PMD is stopped, the active slave count is reset.
For 802.3ad mode this potentially leaks memory and clears state since
a second sequential activate_slave() will occur when the bond PMD is
restarted and the LSC callback is triggered while the active slave
count is 0. To fix this, don't clear the active slave count when
stopping. Only deactivate_slave() should be used to clear the slaves.

Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>

net/cxgbevf: add missing Tx byte counters

Fixes: a0a344a8f728 ("net/cxgbe: add VF port statistics")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: fix Rx channel map and queue type

Set the Rx channel map and ingress queue type properly to allow firmware
to manage the internal mapping correctly.

Fixes: 6c2809628cd5 ("net/cxgbe: improve latency for slow traffic")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: query firmware for max queues available

Query firmware for max Tx and Rx queues that can be allocated.
Move the code to determine max queues to common place for both
PF and VF.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: enable more RSS hash functions

Enable RSS on IPv4 fragmented packets and IPv6 packets with extension
headers based on 2-tuple hash.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add link up and down ops

Add ops to set link up and down for both PF and VF. If wait_to_complete
is set, poll for link update for up to 10 seconds max.

Original work by Surendra Mobiya <surendra@chelsio.com>

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: support to redirect packets to egress port

Add action to redirect matched packets to specified egress physical
port without sending them to host.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: support to match on ingress physical port

Add support to match packets based on ingress physical port.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: support to flush flows in HASH region

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: query hit counters for flows in HASH region

Add interface to enable hit counters for flows offloaded in HASH
region.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: support to delete flows in HASH region

Add interface to delete offloaded flows in HASH region. Use the
hash index saved during insertion to delete the corresponding flow.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: support to offload flows to HASH region

Add interface to offload flows to HASH region. Translate internal
filter specification to requests to offload flows to HASH region.
Save the returned hash index of the offloaded flow for deletion later.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add Compressed Local IP region

CLIP region holds destination IPv6 addresses to be matched for
corresponding flows. Query firmware for CLIP resources and allocate
table to manage them. Also update LE-TCAM to use CLIP to reduce
number of slots needed to offload IPv6 flows.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: validate flows offloaded to HASH region

Fetch supported match items in HASH region. Ensure the mask
is all set for all the supported match items to be offloaded
to HASH region. Otherwise, offload them to LE-TCAM region.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: query firmware for HASH filter resources

Fetch available HASH filter resources and allocate table for managing
them. Currently only supported on Chelsio T6 family of NICs.

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

ethdev: remove old offload API

In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload

For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.

The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE

The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>

net/fm10k: remove unused constant

The macro FM10K_SIMPLE_TX_FLAG was used with old Tx queue flags.
It is no longer used and was forgotten when cleaning old Tx flags.

Fixes: 1778ef67e2e7 ("net/fm10k: remove dependence on Tx queue flags")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: convert remaining apps to new offload API

Some test applications and examples were not converted
to the new offload API introduced in 17.11.

For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

test: remove unused configuration for bonding

The global variables rx_mode and fdir_conf
are not used in this test file.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: remove code from KNI example guide

The example code is showing how to use KNI, and can be found in
examples/kni/
The documentation guide for this example is explaining the code
to ease the understanding of the example.
And inside this documentation, there are a lot of examples code
which are copy/pasted. It is really too much and hard to maintain.

The code inside this documentation is replaced by the name
of the functions.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

test/virtual_pmd: report CRC strip capability

Add DEV_RX_OFFLOAD_CRC_STRIP to virtual drivers since they don't
use CRC at all, when an application requires this offload virtual
PMDs should not return error.

Fixes: 3d12dceed2df ("ethdev: add new offload flag to keep CRC")

Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ark: use SPDX tags

Replace the BSD license header with the SPDX tag.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: support Rx descriptor status for EF10 ESSB datapath

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>

net/sfc: support ops to check ready descriptors in ESSB Rx

Implement EF10 ESSB Rx datapath callback to get number of pending
descriptors.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>

net/sfc: fix double-free in EF10 ESSB Rx queue purge

Number of buffers left in completed descriptor may be 0. If so,
all buffers of the descriptor are freed once again.

Fixes: 390f9b8d82c9 ("net/sfc: support equal stride super-buffer Rx mode")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>

net/sfc: discard packets with bad CRC on EF10 ESSB Rx

Fixes: 390f9b8d82c9 ("net/sfc: support equal stride super-buffer Rx mode")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>

net/pcap: capture only ingress packets from Rx iface

Support rx of in direction packets only
Useful for apps that also tx to eth_pcap ports in order to not see them
echoed back in as rx when out direction is also captured

Example:
In case using rx_iface and sending *single* packet to eth1
it will loop forever as the when it is sent to tx_iface=eth1
it will be captured again on the rx_iface=eth1 and so on
  $RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface=eth1,tx_iface=eth1'
  …
  ---------------------- Forward statistics for port 0  ------------
  RX-packets: 758            RX-dropped: 0             RX-total: 758
  TX-packets: 758            TX-dropped: 0             TX-total: 758
  ------------------------------------------------------------------
While if using rx_iface_in it will not be captured on the way out and
be forwarded only once
  $RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface_in=eth1,tx_iface=eth1'
  …
  ---------------------- Forward statistics for port 0  ------------
  RX-packets: 1              RX-dropped: 0             RX-total: 1
  TX-packets: 1              TX-dropped: 0             TX-total: 1
  ------------------------------------------------------------------

Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: cut non VLAN ID bits from TCI

TCI may contain PCP or DEI bits. Matching of these bits is not
supported, but the bits still may be set in specification value and
not covered by mask. So, these bits should be ignored.

Fixes: 894080975e1e ("net/sfc: support VLAN in flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>

ethdev: document xstats API assumption

Documents the assumption that 'xstats[i].id == i' and
key=xstats_names[i].name, value=xstats[i].value

xstats[i].id is still used for xstats _by_id() APIs.

This patch reverts some part of the commit 6d52d1d4afb4 ("ethdev:
clarify extended statistics documentation")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

net/virtio: improve offload check performance

Instead of checking the multiple Virtio features bits for
every packet, let's do the check once at configure time and
store it in virtio_hw struct.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

net/virtio: do not use simple Rx if TCP LRO or VLAN strip

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

net/virtio: improve Tx offload features negotiation

This patch improves the Tx offload features selection depending
on whether the application request for offloads.

When the application doesn't request for Tx offload features,
the corresponding features bits aren't negotiated.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

net/virtio: remove simple Tx path

The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

net/mlx5: activate Verbs cleanup on removal

Starting from rdma-core v19, Mellanox OFED 4.4, the Verbs resources
cleanup is properly activated in plug-out process when setting the
MLX5_DEVICE_FATAL_CLEANUP environment variable to 1.

Set the aforementioned variable to 1.

Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

doc: update release notes with new enic features

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

net/enic: cap Rx packet processing to end of desc ring

In the default Rx handler stop processing packets at the end of
the completion ring so that wrapping doesn't have to be checked
in the inner while loop.

Also, check the color bit in the completion without using a conditional.

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

net/enic: add simple Rx handler

Add an optimized Rx handler for non-scattered Rx.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>

net/enic: check maximum packet size in Tx prepare handler

The default tx handler checks the maximum packet size. Check it in the
prepare handler too. WQ stops working if the app/driver tries to send
oversized packets, so these checks are unavoidable.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: add the simple version of Tx handler

Add a much-simplified handler that works when all offloads are
disabled, except mbuf fast free. When compared against the default
handler, under ideal conditions, cycles per packet drop by 60+%.
The driver tries to use the simple handler first.

The idea of using specialized/simplified handlers is from the Intel
and Mellanox drivers.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: reduce Tx completion updates

Request one completion update per roughly 32 buffers. It saves DMA
resources on the NIC, PCIe utilization, and cache miss rates.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: support mbuf fast free offload

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: use mbuf pointer array for inflight Tx packets

WQ is currently using vnic_wq_buf to store mbuf pointers for Tx
packets. But, it contains an unused mempool pointer and mbuf is
unnecessarily cast to void pointer. Remove vnic_wq_buf entirely and
use an mbuf pointer array instead.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: add handlers to add/delete vxlan port number

The NIC has one configurable VXLAN port, which is set to the default
4789 upon vNIC reset. Adding a non-default port replaces this single
VXLAN port. Deleting the previously added non-default port restores
the VXLAN port to the hardware default.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: add devarg to specify ingress VLAN rewrite mode

Add a new devarg "ig-vlan-rewrite" to allow the user to set
non-default rewrite mode. The UCS VIC may add/remove/modify the VLAN
header of an ingress packet depending on the ingress VLAN rewrite
mode.

By default, the driver sets the pass-through mode, which tells the NIC
"do not touch VLAN header and preserve it as is". This mode is usually
sufficient, but can complicate deployments for certain environments.
For example, OVS-DPDK in UCS blade environments may want to use "untag
default VLAN mode", which removes the VLAN header from an ingress
packet if it matches vNIC's default VLAN.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: report ring limits and preferred default values

Report min/max ring sizes, alignments, and so on, and rely on the
common checks implemented in the rte_ethdev layer.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: initialize RQ fetch index before enabling RQ

The fetch index must be initialized only when RQ is
disabled. Otherwise, it may lead to stale entries in IG descriptor
cache on the VIC.

Fixes: a74629cfa3a1 ("net/enic: enable RQ first and then post Rx buffers")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: do not overwrite admin Tx queue limit

Currently, enic_alloc_wq (via rte_eth_tx_queue_setup) may overwrite
the admin limit with a lower value. This is wrong as seen in the
following sequence.

1. UCS admin-set Tx queue limit (config.wq_desc_count) = 4096
2. Set up tx queue with 512 descriptors
   The admin limit (config.wq_desc_count) becomes 512.
3. Stop ports and now set up Tx queue with 1024 descriptors.
   This fails because 1024 is greater than the admin limit (512).

Do not modify the admin limit, and when queried, report the current
number of descriptors instead of the admin limit. The rx queue setup
(enic_alloc_rq) does not this problem.

Fixes: fefed3d1e62c ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: update the UDP RSS detection mechanism

The UDP RSS interface has changed in the release firmware for 100G VIC
adapters. The capability bit is now in NIC_CFG. Also the driver is
supposed to use CMD_NIC_CFG_CHK and check if RSS config is
successful. No more changes are expected with respect to UDP RSS API.

Fixes: 94c351895888 ("net/enic: update UDP RSS controls")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/enic: fix receive packet types

Fix missing or incorrect packet types discovered by DTS.
- Non-IP inner packets
  Set the tunnel flag.
- Inner Ethernet packets
  All supported tunnel packets have Ethernet as inner packets. So, set
  INNER_L2_ETHER for all tunnel types.
- IPv4 fragments carrying TCP/UDP
  The NIC indicates TCP/UDP based on the protocol in IP header. For
  fragments, ignore that bit and always set L4_FRAG.
- IPv6 fragments
  The NIC does regconize fragments (IPv6 packets with fragment extension
  headers). Set packet types for these.

Fixes: 93fb21fdbe23 ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

net/mlx4: refine Rx packet type report

This commit refines the Rx Packet type flags reported by the PMD
for each packet being received in order to make the report more
accurate.

Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/e1000: support descriptor status API

rte_eth_rx_descritpr_status and rte_eth_tx_descriptor_status
are supported by igb VF.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/fm10k: support descriptor status API

rte_eth_rx_descritpr_status and rte_eth_tx_descriptor_status
are supported by fm10K.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: remove VF interrupt handler

For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.

The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).

Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.

Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/virtio: advertise support in-order feature

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio: add in-order Rx/Tx into selection

After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.

Rx path select logic: If IN_ORDER and merge-able are enabled will select
IN_ORDER Rx path. If IN_ORDER is enabled, Rx offload and merge-able are
disabled will select simple Rx path. Otherwise will select normal Rx
path.

Tx path select logic: If IN_ORDER is enabled will select IN_ORDER Tx
path. Otherwise will select default Tx path.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio: support in-order Rx and Tx

IN_ORDER Rx function depends on merge-able feature. Descriptors
allocation and free will be done in bulk.

Virtio dequeue logic:
    dequeue_burst_rx(burst mbufs)
    for (each mbuf b) {
            if (b need merge) {
                    merge remained mbufs
                    add merged mbuf to return mbufs list
            } else {
                    add mbuf to return mbufs list
            }
    }
    if (last mbuf c need merge) {
            dequeue_burst_rx(required mbufs)
            merge last mbuf c
    }
    refill_avail_ring_bulk()
    update_avail_ring()
    return mbufs list

IN_ORDER Tx function can support offloading features. Packets which
matched "can_push" option will be handled by simple xmit function. Those
packets can't match "can_push" will be handled by original xmit function
with in-order flag.

Virtio enqueue logic:
    xmit_cleanup(used descs)
    for (each xmit mbuf b) {
            if (b can inorder xmit) {
                    add mbuf b to inorder burst list
                    continue
            } else {
                    xmit inorder burst list
                    xmit mbuf b by original function
            }
    }
    if (inorder burst list not empty) {
            xmit inorder burst list
    }
    update_avail_ring()

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio: extract common part for in-order functions

IN_ORDER virtio-user Tx function support Tx checksum offloading and
TSO which also support on normal Tx function. So extracts common part
into separated function for reuse.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio: free in-order descriptors before device start

Add new function for freeing IN_ORDER descriptors. As descriptors will
be allocated and freed sequentially when IN_ORDER feature was
negotiated. There will be no need to utilize chain for freed descriptors
management, only index update is enough.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio-user: add mrg-rxbuf and in-order vdev parameters

Add parameters for configuring VIRTIO_NET_F_MRG_RXBUF and
VIRTIO_F_IN_ORDER feature bits. If feature is disabled, also update
corresponding unsupported feature bit.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio-user: add unsupported features mask

This patch introduces unsupported features mask for virtio-user device.
For virtio-user server mode, when reconnecting virtio-user will retrieve
vhost device features as base and then unmask unsupported features.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio: add in-order feature bit definition

If VIRTIO_F_IN_ORDER has been negotiated, driver will use descriptors in
ring order: starting from offset 0 in the table, and wrapping around at
the end of the table. Also introduce use_inorder_[rt]x flag for
selection of IN_ORDER [RT]x handlers.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: advertise support in-order feature

If devices always use descriptors in the same order in which they have
been made available. These devices can offer the VIRTIO_F_IN_ORDER
feature. If negotiated, this knowledge allows devices to notify the use
of a batch of buffers to virtio driver by only writing used ring index.

Vhost user device has supported this feature by default. If vhost
dequeue zero is enabled, should disable VIRTIO_F_IN_ORDER as vhost can’t
assure that descriptors returned from NIC are in order.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/bnxt: use correct flags during VLAN configuration

Setting of VLAN filter cmd was being done with incorrect flag value.
We need to use inner vlan fields instead of outer vlan.

Fixes: 7fe5668d2ea3 ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix Rx ring count limitation

Fixed size of fw_grp_ids in VNIC is limiting the number of Rx rings
being created. With this patch we are allocating fw_grp_ids dynamically,
allowing us to get over this artificial limit.

Fixes: 9738793f28ec ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: check VF resources if resource manager is enabled

If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix to move a flow to a different queue

While moving a flow to a different destination queue,
the l2_filter_id being passed to the FW command was incorrect.
Fix it by re-using the matching filter's l2_filter_id since
that is supposed to be the same in this case.

Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: allocate RSS context only if RSS mode is enabled

allocate RSS context only if RSS mode is enabled.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>