git.droids-corp.org - dpdk.git/log

test/bpf: fix undefined behavior with clang

test_shift1_check() function fails with clang build.
The reason for that is that clang uses 64-bit shift instruction for
what expected to be 32-bit operation.
To be more specific, this C code:
r2 = (uint32_t)r2 >> r4;
With clang produces:
41a4eb: 48 d3 ef shr %cl,%rdi
In that particular case it is an allowed choice, as from one side
left-operand value is known to fit into 32 bits, from other side
according to 'C' standard:
"...if the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior is
undefined."
The problem is that on x86 behavior for 64-bit and 32-bit shift
operation might differ.
The fix avoids undefined behavior by making sure
that right operand will not exceed width of the promoted left operand.

Bugzilla ID: 811
Fixes: 9f8f9d91a701 ("test/bpf: introduce functional test")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

app/crypto-perf: support lookaside IPsec

Added support for lookaside IPsec protocol offload.
Supported cases:
-AEAD
-Cipher+auth

Command used for testing:
./dpdk-test-crypto-perf -c 0xf -- --devtype crypto_octeontx2 --ptest
throughput --optype ipsec --cipher-algo aes-cbc --pool-sz 16384
--cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo
sha1-hmac --auth-op generate --digest-sz 16 --total-ops 10000000
--burst-sz 32 --buffer-sz 64,128,256,512,1024,1280,2048

./dpdk-test-crypto-perf -c 0xf -- --devtype crypto_octeontx2 --ptest
throughput --optype ipsec --aead-algo aes-gcm --pool-sz 16384
--aead-op encrypt --aead-key-sz 32 --aead-iv-sz 12 --aead-aad-sz 16
--digest-sz 16 --total-ops 10000000 --burst-sz 32
--buffer-sz 64,128,256,512,1024,1280,2048

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>

security: add reserved bit fields

In struct rte_security_ipsec_sa_options, for every new option
added, there is an ABI breakage, to avoid, a reserved_opts
bitfield is added to for the remaining bits available in the
structure.
Now for every new sa option, these reserved_opts can be reduced
and new option can be added.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

security: hide internal API

rte_security_dynfield_register() is an internal
API to be used by the driver, hence moving it to internal.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

app/bbdev: handle endianness of test data

With data input, output and harq also supported in big
endian format, this patch updates the testbbdev application
to handle the endianness conversion as directed by the
the driver being used.

The test vectors assumes the data in the little endian order, and
thus if the driver supports big endian data processing, conversion
from little endian to big is handled by the testbbdev application.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

app/bbdev: enable la12xx

Enabled NXP la12xx bbdev driver in test bbdev app
for unit testing.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

baseband/la12xx: support enqueue and dequeue

Add support for enqueue and dequeue the LDPC enc/dec
from the modem device.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

baseband/la12xx: add queue and modem config

This patch add support for connecting with modem
and creating the ipc channel as queues with modem
for the exchange of data.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

baseband/la12xx: support multiple modems

This patch add support for multiple modems by assigning
a modem id as dev args in vdev creation.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

baseband/la12xx: add devargs option for max queues

This patch adds dev args to take max queues as input

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

baseband/la12xx: introduce NXP LA12xx driver

This patch introduce the baseband device drivers for NXP's
LA1200 series software defined baseband modem.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>

bbdev: add device info for data endianness

Added device information to capture explicitly the assumption
of the input/output data byte endianness being processed.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: add raw API support in 5G algos

This patch add support for RAW API testing with ZUC
and SNOW test cases.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

test/crypto: add raw API test for dpaax

This patch add support for raw API tests for
dpaa_sec and dpaa2_sec platforms.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support AEAD and proto with raw API

This add support for AEAD and proto offload with raw APIs
for dpaa_sec driver.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support authonly and chain with raw API

This patch improves the raw vector support in dpaa_sec driver
for authonly and chain usecase.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa_sec: support raw datapath API

This patch add raw vector API framework for dpaa_sec driver.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: enhance error checks with raw buffer API

This patch improves error conditions and support of
Wireless algos with raw buffers.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support OOP with raw buffer API

add support for out of order processing with raw vector APIs.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support AEAD with raw buffer API

add raw vector API support for AEAD algos.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support authenc with raw buffer API

This patch supports AUTHENC with raw buufer APIs

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support auth only with raw buffer API

Auth only with raw buffer APIs has been supported in this patch.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/dpaa2_sec: support raw datapath API

This path add framework for raw API support.
The initial patch only test cipher only part.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

cryptodev: fix multi-segment raw vector processing

If no next segment available the “for” loop will fail and it still
returns i+1 i.e. 2, which is wrong as it has filled only 1 buffer.

Fixes: 7adf992fb9bf ("cryptodev: introduce CPU crypto API")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

cryptodev: add field for out-of-place in raw vector

The structure rte_crypto_sym_vec is updated to
add dest_sgl to support out of place processing.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

cryptodev: add total raw buffer length

The current crypto raw data vectors is extended to support
rte_security usecases, where we need total data length to know
how much additional memory space is available in buffer other
than data length so that driver/HW can write expanded size
data after encryption.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

cryptodev: rename field in vector struct

This patch renames the sgl to src_sgl in struct rte_crypto_sym_vec
to help differentiating between source and destination sgl.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

doc: remove unneeded security structs extension notice

The new fields regarding TSO support were not implemented following
feedback, it was decided to implement TSO support by using existing
mbuf fields.

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

doc: remove unneeded IPsec new field notice

The deprecation notice regarding extending rte_ipsec_sa_prm with a
new field hdr_l3_len is no longer applicable.

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

ipsec: support setting initial ESN value

Update IPsec library to support initial ESN value.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

ipsec: support SA telemetry

Add telemetry support for ipsec SAs.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

mbuf: add IPsec ESP tunnel type

Add ESP tunnel type to the tunnel types list that can be specified
for TSO or checksum on the inner part of tunnel packets.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

ipsec: support NAT-T

Add support for the IPsec NAT-Traversal use case for Tunnel mode
packets.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

security: add UDP parameters for IPsec NAT-T

Add support for specifying UDP port params for UDP encapsulation option.
RFC3948 section-2.1 does not enforce using specific the UDP ports for
UDP-Encapsulated ESP Header

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

ipsec: support more AEAD algorithms

Added support for AES_CCM, CHACHA20_POLY1305 and AES_GMAC.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

security: add ESN field to IPsec xform

Update ipsec_xform definition to include ESN field.
This allows the application to control the ESN starting value.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

cryptodev: extend data-unit length field

As described in [1] and as announced in [2], The field ``dataunit_len``
of the ``struct rte_crypto_cipher_xform`` moved to the end of the
structure and extended to ``uint32_t``.

In this way, sizes bigger than 64K bytes can be supported for data-unit
lengths.

[1] commit d014dddb2d69 ("cryptodev: support multiple cipher
data-units")
[2] commit 9a5c09211b3a ("doc: announce extension of crypto data-unit
length")

Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

app/crypto-perf: fix AAD template copy overrun

This patch fixes a possible buffer overrun problem in crypto perf test.
Previously when user configured AAD size is over 12 bytes the copy
of template AAD will cause a buffer overrun.
The problem is fixed by only copy up to 12 bytes of AAD template.

Fixes: 8a5b494a7f99 ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Przemyslaw Zegan <przemyslawx.zegan@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

examples/ipsec-secgw: accept inline packet in single SA

In inline protocol inbound SA's, plain IPv4 and IPv6 packets are
delivered to application unlike inline crypto or lookaside.
Hence fix the application to not drop them when working in
single SA mode.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

crypto/cnxk: add max queue pairs limit option

Adds max queue pairs limit devargs for crypto cnxk driver. This
can be used to set a limit on the number of maximum queue pairs
supported by the device. The default value is 63.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>

mempool: accept user flags only

As reported by Dmitry, RTE_MEMPOOL_F_POOL_CREATED is a flag only
manipulated internally.
This flag is not supposed to be requested from an application and would
probably result in an incorrect behavior if an application did pass it.

At least one other internal flag has been added recently and more may be
introduced later.

Rework the check and export a mask of valid user flags for use in the
unit test.

Fixes: b240af8b10f9 ("mempool: enforce valid flags at creation")

Reported-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

mempool: deprecate unused physical page defines

MEMPOOL_PG_NUM_DEFAULT and MEMPOOL_PG_SHIFT_MAX are not used.

Fixes: fd943c764a63 ("mempool: deprecate xmem functions")

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: add namespace to driver register macro

Add RTE_ prefix to macro used to register mempool driver.
The old one is still available but deprecated.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: make header size calculation internal

Add RTE_ prefix to helper macro to calculate mempool header size and
make it internal. Old macro is still available, but deprecated.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: add namespace to internal helpers

Add RTE_ prefix to internal API defined in public header.
Use the prefix instead of double underscore.
Use uppercase for macros in the case of name conflict.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: add namespace to flags

Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.

Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: enhance flags documentation readability

Move documentation into a separate line just before define.
Prepare to have a bit longer flag name because of namespace prefix.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mcslock: use WFE in lock for aarch64

Instead of polling for previous lock holder unlocking, use
wait_until_equal API.

Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

mem: use WFE for init sync on aarch64

Instead of polling for mcfg->magic to be updated, use wait_until_equal
API.

Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples: remove unneeded atomic header include

Remove the unnecessary header file rte_atomic.h
included in example module.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/server_node_efd: use compiler atomics for sync

Convert rte_atomic32_test_and_set to compiler CAS atomic
operation for display_stats sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/vm_power: use compiler atomics for sync

Convert rte_atomic32_cmpset to compiler atomic CAS
operation for channel status sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/l2fwd-jobstats: use compiler atomics for stats sync

Convert rte_atomic usages to compiler atomic built-ins
for stats_read_pending sync in l2fwd_jobstats module.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/performance-thread: use compiler atomics for sync

Convert rte_atomic usages to compiler atomic built-ins
for thread sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/kni: use compiler atomics for status sync

Convert rte_atomic usages to compiler atomic builit-ins
for kni_stop and kni_pause sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/multi_process: use compiler atomics for sync

Convert rte_atomic32_test_and_set usage to compiler atomic
CAS operation for display_stats sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

examples/bbdev: use compiler atomics for flag sync

Convert rte_atomic usages to compiler atomic built-ins
for global_exit_flag sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

test/hash: use compiler atomics for sync

Convert rte_atomic usages to compiler atomic built-ins
for stats sync.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>

stack: remove unneeded atomic header include

In stack module, remove the header file rte_atomic.h
as it is not being used.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

usertools/telemetry: list file-prefixes

This patch adds the option --list (-l) to dpdk-telemetry.py which will
print all of the available file-prefixes for DPDK processes that have
telemetry enabled.
The prefixes will also be printed if the user passes an incorrect prefix
in the --file-prefix (-f) option.

Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>

usertools/telemetry: fix instance option help

The instance option help text was incorrect, this patch corrects it.

Fixes: 11435aae2089 ("usertools/telemetry: connect to separate instances")

Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

net/mlx5: support mempool registration

When the first port in a given protection domain (PD) starts,
install a mempool event callback for this PD and register all existing
memory regions (MR) for it. When the last port in a PD closes,
remove the callback and unregister all mempools for this PD.
This behavior can be switched off with a new devarg: mr_mempool_reg_en.

On TX slow path, i.e. when an MR key for the address of the buffer
to send is not in the local cache, first try to retrieve it from
the database of registered mempools. Supported are direct and indirect
mbufs, as well as externally-attached ones from MLX5 MPRQ feature.
Lookup in the database of non-mempool memory is used as the last resort.

RX mempools are registered regardless of the devarg value.
On RX data path only the local cache and the mempool database is used.
If implicit mempool registration is disabled, these mempools
are unregistered at port stop, releasing the MRs.

Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

common/mlx5: add mempool registration facilities

Add internal API to register mempools, that is, to create memory
regions (MR) for their memory and store them in a separate database.
Implementation deals with multi-process, so that class drivers don't
need to. Each protection domain has its own database. Memory regions
can be shared within a database if they represent a single hugepage
covering one or more mempools entirely.

Add internal API to lookup an MR key for an address that belongs
to a known mempool. It is a responsibility of a class driver
to extract the mempool from an mbuf.

Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

mempool: add non-IO flag

Mempool is a generic allocator that is not necessarily used
for device IO operations and its memory for DMA.
Add MEMPOOL_F_NON_IO flag to mark such mempools automatically
a) if their objects are not contiguous;
b) if IOVA is not available for any object.
Other components can inspect this flag
in order to optimize their memory management.

Discussion: https://mails.dpdk.org/archives/dev/2021-August/216654.html

Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

mempool: add event callbacks

Data path performance can benefit if the PMD knows which memory it will
need to handle in advance, before the first mbuf is sent to the PMD.
It is impractical, however, to consider all allocated memory for this
purpose. Most often mbuf memory comes from mempools that can come and
go. PMD can enumerate existing mempools on device start, but it also
needs to track creation and destruction of mempools after the forwarding
starts but before an mbuf from the new mempool is sent to the device.

Add an API to register callback for mempool life cycle events:
* rte_mempool_event_callback_register()
* rte_mempool_event_callback_unregister()
Currently tracked events are:
* RTE_MEMPOOL_EVENT_READY (after populating a mempool)
* RTE_MEMPOOL_EVENT_DESTROY (before freeing a mempool)
Provide a unit test for the new API.
The new API is internal, because it is primarily demanded by PMDs that
may need to deal with any mempools and do not control their creation,
while an application, on the other hand, knows which mempools it creates
and doesn't care about internal mempools PMDs might create.

Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

doc: fix spelling in cnxk guide

Fix spelling error which is causing reports of other patches failing.

Fixes: 69daa9e5022b ("net/cnxk: support inline security setup for cn10k")

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

raw/octeontx2_ep: remove driver

Removing the rawdev based octeontx2-ep driver as the dependent
common/octeontx2 will soon be going away. Moreover this driver is no
longer required as the net/octeontx_ep driver is sufficient.

Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>

raw/octeontx2_dma: remove driver

Removing the rawdev based octeontx2-dma driver as the dependent
common/octeontx2 will be soon be going away. Also a new DMA driver will
be coming in this place once the rte_dmadev library is in.

Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>

test/dma: add burst capacity test

Add a test case to validate the functionality of drivers' burst capacity
API implementations.

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

test/dma: add fill tests

For DMA devices which support the fill operation, run unit tests to
verify fill behaviour is correct.

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

test/dma: add failure handling tests

Add a series of tests to inject bad copy operations into a dmadev to
test the error handling and reporting capabilities. Various combinations
of errors in various positions in a burst are tested, as are errors in
bursts with fence flag set, and multiple errors in a single burst.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: add flag for error handling support

Due to HW or driver limitations, not all dmadevs may support full error
handling e.g. safely managing and reporting an invalid address to a copy
operation. The skeleton dmadev, for example, being pure software will
always seg-fault if passed an invalid address. To indicate the
availability of safe error handling by a device, we add a capability
flag for it.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>

test/dma: add more comprehensive copy tests

Add unit tests for various combinations of use for dmadev, copying
bursts of packets in various formats, e.g.

1. enqueuing two smaller bursts and completing them as one burst
2. enqueuing one burst and gathering completions in smaller bursts
3. using completed_status() function to gather completions rather than
just completed()

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

test/dma: run test suite on skeleton driver

When running the dmadev_autotest, run the suite of copy tests on the
skeleton driver created for API testing too, rather than just destroying
the driver instances once the API tests are complete. This helps to
sanity check the tests themselves are reasonable.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>

test/dma: add basic copy tests

For each dmadev instance, perform some basic copy tests to validate that
functionality.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

test/dma: add basic dmadev instance tests

Run basic sanity tests for configuring, starting and stopping a dmadev
instance to help validate drivers. This also provides the framework for
future tests for data-path operation.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>

dmadev: add device iterator

Add a function and wrapper macro to iterate over all DMA devices.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>

dmadev: add burst capacity API

Add a burst capacity check API to the dmadev library. This API is useful to
applications which need to how many descriptors can be enqueued in the
current batch. For example, it could be used to determine whether all
segments of a multi-segment packet can be enqueued in the same batch or not
(to avoid half-offload of the packet).

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: add channel status check for testing use

Add in a function to check if a device or vchan has completed all jobs
assigned to it, without gathering in the results. This is primarily for
use in testing, to allow the hardware to be in a known-state prior to
gathering completions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>

test/dma: add dmadev API test

This patch add dmadev API test which based on 'dma_skeleton' vdev. The
test cases could be executed using 'dmadev_autotest' command in test
framework.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dma/skeleton: introduce skeleton driver

Skeleton dmadevice driver, on the lines of rawdev skeleton, is for
showcasing of the dmadev library.

Design of skeleton involves a virtual device which is plugged into VDEV
bus on initialization.

Also, enable compilation of dmadev skeleton drivers.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: support multi-process

This patch add multi-process support for dmadev.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: add data plane API

This patch add data plane API for dmadev.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: add control plane API

This patch add control plane API for dmadev.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

dmadev: introduce DMA device library

The 'dmadev' is a generic type of DMA device.

This patch introduce the 'dmadev' device allocation functions.

The infrastructure is prepared to welcome drivers in drivers/dma/

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

mbuf: enforce no option for dynamic fields and flags

As stated in the API, dynamic field and flags should be created with no
additional flag (simply in the API for future changes).

Fix the dynamic flag register helper which was not enforcing it and add
unit tests.

Fixes: 4958ca3a443a ("mbuf: support dynamic fields and flags")

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

memzone: enforce valid flags when reserving

If we do not enforce valid flags are passed by an application, this
application might face issues in the future when we add more flags.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>

mempool: enforce valid flags at creation

If we do not enforce valid flags are passed by an application, this
application might face issues in the future when we add more flags.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

usertools/telemetry: provide info on available sockets

When a user runs the dpdk-telemetry script and fails to connect because
the socket path does not exist, run a scan for possible sockets that
could be connected to and inform the user of the command needed to
connect to those.

For example:

  $ ./dpdk-telemetry.py -i4
  Connecting to /run/user/1000/dpdk/rte/dpdk_telemetry.v2:4
  Error connecting to /run/user/1000/dpdk/rte/dpdk_telemetry.v2:4

  Other DPDK telemetry sockets found:
  - dpdk_telemetry.v2  # Connect with './dpdk-telemetry.py'
  - dpdk_telemetry.v2:2  # Connect with './dpdk-telemetry.py -i 2'
  - dpdk_telemetry.v2:1  # Connect with './dpdk-telemetry.py -i 1'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>

usertools/telemetry: connect to separate instances

For processes run using "in-memory" mode sharing the same runtime dir,
we add support for connecting to the separate instance sockets created
using ":1", ":2" etc. via new "-i" or "--instance" argument. Add details
on connecting to separate instances to the telemetry howto document.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>

telemetry: fix socket path conflicts for in-memory mode

When running using in-memory mode, multiple processes can use the same
runtime dir, leading to conflicts with the telemetry sockets in that
directory. We can resolve this by appending a suffix to each socket
beyond the first, with the suffix being an increasing counter value.
Each process uses the first unused socket counter value.

Fixes: 6dd571fd07c3 ("telemetry: introduce new functionality")

Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>

eal: limit telemetry to primary processes

Telemetry interface should be exposed for primary processes only, since
secondary processes will conflict on socket creation, and since all
data in secondary process is generally available to primary. For
example, all device stats for ethdevs, cryptodevs, etc. will all be
common across processes.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>

config/ppc: select instruction set for IBM Power10

For native build, enabling building the highest cpu_instruction_set
supported by the build host, including the new POWER10.

For cross compile, verifying that the compiler supports the
cpu_instruction_set specified in the cross-file

Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>

test/atomic: fix 128-bit atomic test with many cores

When checking the results of the rte_atomic128_cmp_exchange() function,
current code compares the values of a uint32_t and a uint64_t variable.
If the number of lcores used by the test is large, or the value of the
iteration count N is increased, the variable size mismatch can cause a
false test failure. Modify the comparison to compare uint64_t values.

Fixes: fa3253c534b1 ("test/atomic: add 128-bit atomic compare exchange test")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

eal/ppc: use compiler builtins for atomics

Replace existing PPC assembly code for rte_atomicXX ops with compiler
atomic builtins as previously adopted by DPDK (see [1] and [2]). This
has the additional benefit of resolving a POWER10 build failure due to an
outstanding gcc issue which fails on the existing PPC assembly code [3].

[1] https://www.dpdk.org/blog/2021/03/26/dpdk-adopts-the-c11-memory-model/
[2] https://doc.dpdk.org/guides/rel_notes/deprecation.html
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98519

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>

ip_frag: fix fragmenting IPv4 fragment

Current implementation of rte_ipv4_fragment_packet() doesn’t take
into account offset and flag values of the given packet, but blindly
assumes they are always zero (original packet is not fragmented).
According to RFC791, fragment and flag values for new fragment
should take into account values provided in the original IPv4 packet.

Fixes: 4c38e5532a07 ("ip_frag: refactor IPv4 fragmentation into a proper library")
Cc: stable@dpdk.org
Signed-off-by: Huichao Cai <chcchc88@163.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

mbuf: remove deprecated flag for bad outer IPv4 checksum

Removed offload flag PKT_RX_EIP_CKSUM_BAD. PKT_RX_OUTER_IP_CKSUM_BAD
should be used as a replacement.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mempool: fix name size in mempool structure

Use correct define as a name array size.

The change breaks ABI and therefore cannot be backported to
stable branches.

Fixes: 38c9817ee1d8 ("mempool: adjust name size in related data types")

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: David Marchand <david.marchand@redhat.com>