net/mlx5: support ConnectX-5 devices

Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/qede: change few log levels

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: fix per queue statisitics

If value of number of rxq/txq is different than
RTE_ETHDEV_QUEUE_STAT_CNTRS, limit per queue
stats/xstats to minimum of the two.

Fixes: 7634c5f91569 ("net/qede: add queue statistics")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: fix PF fastpath status block index

Allocate double the number of fastpath status block index
since the PF RX/TX queues are not sharing the status block.
This is an interim solution till other parts of the code
is modified to handle the same.

Fixes: f1e4b6c0acee ("net/qede: fix status block index for VF queues")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix minimum buffer size and scatter Rx check

 - Fix minimum RX buffer size to 1024B
 - Force enable scatter/gather mode if given RX buf size is lesser than MTU
 - Adjust RX buffer size to cache-line size with overhead included

Fixes: bec0228816c0 ("net/qede: support scatter gather")
Fixes: 2ea6f76aff40 ("qede: add core driver")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix scatter-gather

 - Make qede_process_sg_pkts() inline and add unlikely check
 - Fix mbuf segment chaining logic in qede_process_sg_pkts()
 - Change qede_encode_sg_bd() to return total segments required
 - Fix first TX buffer descriptor's length
 - Replace repetitive code using a macro

Fixes: bec0228816c0 ("net/qede: support scatter gather")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/i40e: flush tunnel filters

This patch adds i40e_flow_flush_tunnel_filter
function to flush all tunnel filters, including
filters in SW and HW.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: flush ethertype filters

This patch adds i40e_flow_flush_ethertype_filter
function to flush all ethertype filters, including
filters in SW and HW.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add flow flush function

This patch adds i40e_flow_flush function to flush all
filters for users. And flow director flush function
is involved first.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: destroy flow directory filter

This patch supports destroying a flow directory filter
for users.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: destroy tunnel filter

This patch adds i40e_flow_destroy_tunnel_filter
function to destroy a tunnel filter for users.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: destroy ethertype filter

This patch adds i40e_flow_destroy_ethertype_filter
function to destroy a ethertype filter for users.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add flow destroy function

This patch adds i40e_flow_destroy function to destroy
a flow for users.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add flow create function

This patch adds i40e_flow_create function to create a
rule. It will check if a flow matches ethertype filter
or flow director filter or tunnel filter, if the flow
matches some kind of filter, then set the filter to HW.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: parse tunnel filter

This patch adds i40e_flow_parse_tunnel_filter to check
if a rule is a tunnel rule according to items of the
flow pattern, and the function also gets the tunnel info.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: parse flow director filter

This patch adds i40e_flow_parse_fdir_filter to check
if a rule is a flow director rule according to the
flow pattern, and the function also gets the flow
director info.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add flow validate function

This patch adds i40e_flow_validation function to check if
a flow is valid according to the flow pattern.
i40e_flow_parse_ethertype_filter is added first, it also
gets the ethertype info.
i40e_flow.c is added to handle all generic filter events.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: restore flow director filter

Add support of restoring flow director filter.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: restore tunnel filter

Add support of restoring tunnel filter.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: restore ethertype filter

Add support of restoring ethertype filter in case filter
dropped accidentally, as all filters need to be added and
removed by user obviously for generic filter API.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: store flow director filter

Currently there's no flow director filter stored in SW. This
patch stores flow director filters in SW with cuckoo hash,
also adds protection if a flow director filter has been added.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: store tunnel filter

Currently there's no tunnel filter stored in SW.
This patch stores tunnel filter in SW with cuckoo
hash, also adds protection if a tunnel filter has
been added.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: store ethertype filter

Currently there's no ethertype filter stored in SW.
This patch stores ethertype filter with cuckoo hash
in SW, also adds protection if an ethertype filter
has been added.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/mlx5: fix multi segment packet send

Dseg pointer is not initialized when the first segment is inlined
causing a segmentation fault in such situation.

Fixes: 2a66cf378954 ("net/mlx5: support inline send")

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix Tx doorbell

Too much data is uselessly written to the Tx doorbell, which since v16.11
may also cause Tx queues to behave erratically and crash applications.

This regression was seen on VF devices when the BlueFlame buffer size is
zero (txq->bf_buf_size) due to the following change:

 -       txq->bf_offset ^= txq->bf_buf_size;
 +       txq->bf_offset ^= (1 << txq->bf_buf_size);

Fixes: 1d88ba171942 ("net/mlx5: refactor Tx data path")
Fixes: d5793daefec8 ("net/mlx5: reduce memory overhead for BF handling")

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: remove inefficient prefetching

Prefetching completion queue entries is inefficient because too few CPU
cycles are spent before their use, which results into cache misses anyway.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: optimize copy of Ethernet header

Use fewer instructions to copy the first two bytes of Ethernet headers to
work queue elements.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: move static prototype

Gather function prototypes at the beginning of the file.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix missing inline attributes

These functions must be forced inline for better performance.

Fixes: 99c12dcca65d ("net/mlx5: handle Rx CQE compression")
Fixes: 1d88ba171942 ("net/mlx5: refactor Tx data path")
Fixes: 67fa62bc672d ("mlx5: support checksum offload")

CC: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: use vector types to speed up processing

Let compiler automatically use the vector capabilities of the target
machine to optimize instructions.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: use work queue buffer as a raw buffer

Define a single work queue element type that encompasses them all.  It
includes control, Ethernet segment and raw data all grouped in a single
place.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: prepare Tx vectorization

Prepare the code to write the Work Queue Element with vectorized
instructions.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/qede: update PMD version to 2.0.0.1

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: dcbx changes for base driver

This patch includes changes for DCBX like:
 - Return empty parameters for oper-params query when negotiation is not
   complete
 - Use the ieee specific mask value for reading the ethtype value in the
   ieee dcbx mode
 - Endian-ness conversion is not needed for priority<->TC field, as the
   data is already being read/written by ecore in the bigendian way
 - While writing the ets config, base driver incorrectly merges the input
   values with the operational values. The values should be either set
   or unset
 - CEE selection field must be set regardless CEE/IEEE mode
 - Fail the dcbx query for VF interfaces
 - Semantic changes

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: refactor some code bits

Bits of code refactoring in ecore_hw_bar_size(), ecore_get_hw_info()
and ecore_init_cmd_*.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: semantic/formatting changes

This patch consists of semantic/formatting changes. It also includes
comment additions.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: add 50G device PCI id

Add 50G device support for 57980 series

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: add PCI ids for new chip variant

Add PCI IDs for new asic type (defined as CHIP_NUM_AH_xxx).
It supports 50G, 40G, 25G and 10G speeds.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add support for 2x10G mode

Add support for 2x10G mode

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add support for external PHY

Add support for external PHY BCM8485x.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: retrieve FW crash dump info

As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add check for get NVM info return code

Fail ecore_get_hw_info() in case ecore_hw_get_nvm_info() fails.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: add new host ring type option

Add new option called external PBL (page base list) to ecore_chain_alloc
for future use. Mark chain as external if external PBL is provided.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add macros for converting pointer

Add macros PTR_LO and PTR_HI (for converting pointer to HI and LOW bits for
passing to FW hsi handles).

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add new status code

Add ECORE_CONN_RESET to enum ecore_status.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: enhance resource info set printouts

Add the resources names in the ecore_hw_set_resc_info() printouts.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: remove unused struct member

Remove b_hw_channel from struct ecore_dev.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: semantic change

Semantic change: No reason to have p_ prefix to non-pointers

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: improve Tx-switching performance

In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix updating VF queue zone id

Pass the absolute qzone_id when creating queues.

Fixes: 5cdd769a26ec ("qede: add L2 support")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add check to validate Tx queue

Make sure VF tx_qid and the status block index is in the allocated range,
else fail the request.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: rename macro

Rename OOO_LB_TC to PKT_LB_TC to give better meaning.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: make API non-static

Move ecore_set_fw_mac_addr from ecore_l2.c to ecore_dev.c to
facilitate future code reuse.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: change return codes in SR-IOV

Change return codes in VF/SR-IOV base driver from int to
enum _ecore_status_t.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add handling of malicious VF

Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: improve set field macro

Improve robustness of the SET_FIELD macro by using a mask.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add request for PF FLR before load request

Add a request for PF Function Level Reset (FLR) before a load request

Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/mlx5: extend IPv4 flow item

This commits adds:
- Type of service
- Next protocol ID

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: support mark flow action

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: support VXLAN flow item

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: support VLAN flow item

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: support basic flow items and actions

Introduce initial software for rte_flow rules.

VLAN, VXLAN are still not supported.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: add preliminary flow API support

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/ena: use correct field for Rx offload features

Previously the capability bitmap for Rx offloads was mistakenly taken
from Tx capability bitmap field. This patch fixes the problem.

Signed-off-by: Jakub Palider <jpa@semihalf.com>

net/nfp: add TSO support

This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>

net/i40e: fix wrong return value when handling PF message

When VF receives a message from PF, it should check the return
value. But in i40evf_execute_vf_cmd the value is ignored and not
returned to the caller.

Fixes: 95cd21f45d1b ("i40evf: allocate virtchnl commands buffer per VF")

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/mlx5: fix RSS hash result for flows

Flows redirected to a specific queue do not have a valid RSS hash result
and the related mbuf flag must not be set.

Fixes: ecf60761fc2a ("net/mlx5: return RSS hash result in mbuf")

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/ixgbe: remove unused global variable

Removed unused "reg_info" global variable from ixgbe driver.

cat build/app/testpmd.map | grep "Allocating common symbols" -A 15
Allocating common symbols
Common symbol   size    file
reg_info        0x18    build/lib/librte_pmd_ixgbe.a(ixgbe_ethdev.o)

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/nfp: add Rx interrupts

This is supported with UIO and VFIO modules. With UIO, LSC interrupt
is disabled.

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>

net/nfp: avoid modulo operations for handling ring wrapping

Having those modulo operations implies costly instructions execution,
what can be avoided with conditionals and unlikely clauses.

This change makes the software ring read and write indexes to be now
always within the ring size which has to be handled properly. The main
problem is when write pointer wraps and being less than the read pointer.
This happened before, but just with indexes type size (uint32_t) wrapping,
and in that case the processor does the right thing no requiring special
handling by software.

This work has also led to discovering redundant pointers in the driver,
which have been removed.

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>

net/qede/base: fix VF over legacy PF

Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].

Fixes: 22d07d939c3c ("net/qede/base: update")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix to handle acquire request from VF

Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.

Fixes: 22d07d939c3c ("net/qede/base: update")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix Rx queue access by malicious VFs

Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.

Fixes: 98bc693e1938 ("net/qede/base: change queue start")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix mutex in freeing context manager

Fix OSAL_MUTEX_DEALLOC() in freeing the context manager.

Fixes: 22d07d939c3c ("net/qede/base: update")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix error code in resc allocation

Fix to return error code ECORE_INVAL instead of 0 when EQ elements
is too large as done elsewhere in this function.

Fixes: 22d07d939c3c ("net/qede/base: update")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix multiple acquisition requests by VF

There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.

Fixes: 22d07d939c3c ("net/qede/base: update")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix SRIOV printouts

Remove unmeaningful function ID value in print.

Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.

Fixes: 86a2265e59d7 ("qede: add SRIOV support")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: add vendor/device id info

The vendor_id and device_id are used to determine device type. If you
don't have them, then check for determining device type fails and is
always set to default device type.

Fixes: ec94dbc57362 ("qede: add base driver")

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: restrict maximum queues for PF/VF

HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.

Fixes: 2ea6f76aff40 ("qede: add core driver")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix reporting PF driver as disabled

qede PMD does not support SR-IOV PF driver functionality, so
max_vfs is set to 0 to imply the same.

Fixes: 2ea6f76aff40 ("qede: add core driver")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix RSS

This patch includes the following:

- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
  in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
  instead make use of existing RSS APIs for default RSS configuration

Fixes: 6d9e26c42c0d ("net/qede: get RSS hash configuration")
Fixes: 9c5d0a669f9b ("net/qede: fix RSS")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: add fastpath support for VXLAN tunneling

- Support HW checksum and RSS offload for VXLAN traffic
- Identify inner/outer packet_types using lookup table
- Update documentation

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: add slowpath support for VXLAN tunneling

- Enable/disable VXLAN tunneling
- Add/remove VXLAN classification rules
- Destination UDP port configuration

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix filtering code

In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.

Fixes: 2ea6f76aff40 ("qede: add core driver")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: reduce noise in debug logs

Move DP_NOTICE msg under CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/sfc: advertise kmod dependencies in pmdinfo

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/ixgbe/base: update shared code version to 2016.11.21

Update the version of shared codes to cid-ixgbe.2016.11.21.tar.gz,

All files in net/ixgbe/base are developed by another team and
DPDK PMD uses them accordingly.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: report physical layer for SGMII PHY type

For the PHY type SGMII, report the physical layer.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: add write flush required by Inphi PHY

This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: remove unused EEE code

Remove unused old Energy Efficient Ethernet (EEE) code.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: fix IXGBE LSWFW register

This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.

Fixes: af75078fece3 ("first public release")

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: remove unused enum type

remove unused enum type for master/slave control in ixbge_type.h

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: add EEE support for some PHYs

This patch adds Energy Efficient Ethernet (EEE) support for
some Marvell PHYs on some future platforms.
Because EEE capability or status was not indicated previously,
this patch simply assumes that it is supported.

As soon as there is a PHY that does not support EEE, there will
be defects in this area because the driver will not report the
EEE status correctly.

This also deletes some now-unused definitions from an earlier
Marvell PHY implementation and combines a device ID check into a
switch statement.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: update FW PHY flow control

This patch removes the flow control conversion from Rx and Tx to pause
and asymmetric pause, as that is handled by the ixgbe_negotiate_fc().

Performing the conversion prior to ixgbe_negotiate_fc() results in
an incorrect fc mode if Rx only pause is selected when the link partner
is advertising Tx.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: remove unused PHY ID

The first PHY ID for X550 was only used on original HW and
never released. So remove these unused PHY ID.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: remove unneeded MAC type check

ixgbe_read_i2c_combined_generic_int() is only used by devices >= X550.
Set the initial value accordingly and remove the MAC type check.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: add physical layer options for FW PHY type

The "FW" PHY type now supports speeds 10M, 100M, and 1G.
Previously, only the 1G speed was reported for this PHY type.
Add reporting 10M and 100M speed options.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: limit 5Gb support to X550 devices

Only X550 devices support 5Gb. MAC type checks for 5Gb should
be done only for X550 devices.

Signed-off-by: Wei Dai <wei.dai@intel.com>

net/ixgbe/base: include new speeds in VFLINK interpretation

This patch moves some of the extended speeds that come with X552
(5G, 2.5G, 10M) into the link check functions.
It also now returns speed_unknown for speeds that are not known
how to interpret.

Signed-off-by: Wei Dai <wei.dai@intel.com>