Harish Patil [Fri, 6 Jan 2017 08:16:47 +0000 (00:16 -0800)]
net/qede: fix PF fastpath status block index
Allocate double the number of fastpath status block index
since the PF RX/TX queues are not sharing the status block.
This is an interim solution till other parts of the code
is modified to handle the same.
Fixes: f1e4b6c0acee ("net/qede: fix status block index for VF queues") Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Harish Patil [Fri, 6 Jan 2017 08:16:46 +0000 (00:16 -0800)]
net/qede: fix minimum buffer size and scatter Rx check
- Fix minimum RX buffer size to 1024B
- Force enable scatter/gather mode if given RX buf size is lesser than MTU
- Adjust RX buffer size to cache-line size with overhead included
Harish Patil [Fri, 6 Jan 2017 08:16:45 +0000 (00:16 -0800)]
net/qede: fix scatter-gather
- Make qede_process_sg_pkts() inline and add unlikely check
- Fix mbuf segment chaining logic in qede_process_sg_pkts()
- Change qede_encode_sg_bd() to return total segments required
- Fix first TX buffer descriptor's length
- Replace repetitive code using a macro
Fixes: bec0228816c0 ("net/qede: support scatter gather") Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Beilei Xing [Fri, 6 Jan 2017 05:27:12 +0000 (13:27 +0800)]
net/i40e: add flow create function
This patch adds i40e_flow_create function to create a
rule. It will check if a flow matches ethertype filter
or flow director filter or tunnel filter, if the flow
matches some kind of filter, then set the filter to HW.
Beilei Xing [Fri, 6 Jan 2017 05:27:11 +0000 (13:27 +0800)]
net/i40e: parse tunnel filter
This patch adds i40e_flow_parse_tunnel_filter to check
if a rule is a tunnel rule according to items of the
flow pattern, and the function also gets the tunnel info.
Beilei Xing [Fri, 6 Jan 2017 05:27:10 +0000 (13:27 +0800)]
net/i40e: parse flow director filter
This patch adds i40e_flow_parse_fdir_filter to check
if a rule is a flow director rule according to the
flow pattern, and the function also gets the flow
director info.
Beilei Xing [Fri, 6 Jan 2017 05:27:09 +0000 (13:27 +0800)]
net/i40e: add flow validate function
This patch adds i40e_flow_validation function to check if
a flow is valid according to the flow pattern.
i40e_flow_parse_ethertype_filter is added first, it also
gets the ethertype info.
i40e_flow.c is added to handle all generic filter events.
Beilei Xing [Fri, 6 Jan 2017 05:27:06 +0000 (13:27 +0800)]
net/i40e: restore ethertype filter
Add support of restoring ethertype filter in case filter
dropped accidentally, as all filters need to be added and
removed by user obviously for generic filter API.
Beilei Xing [Fri, 6 Jan 2017 05:27:05 +0000 (13:27 +0800)]
net/i40e: store flow director filter
Currently there's no flow director filter stored in SW. This
patch stores flow director filters in SW with cuckoo hash,
also adds protection if a flow director filter has been added.
Beilei Xing [Fri, 6 Jan 2017 05:27:04 +0000 (13:27 +0800)]
net/i40e: store tunnel filter
Currently there's no tunnel filter stored in SW.
This patch stores tunnel filter in SW with cuckoo
hash, also adds protection if a tunnel filter has
been added.
Beilei Xing [Fri, 6 Jan 2017 05:27:03 +0000 (13:27 +0800)]
net/i40e: store ethertype filter
Currently there's no ethertype filter stored in SW.
This patch stores ethertype filter with cuckoo hash
in SW, also adds protection if an ethertype filter
has been added.
Rasesh Mody [Thu, 5 Jan 2017 07:04:07 +0000 (23:04 -0800)]
net/qede/base: dcbx changes for base driver
This patch includes changes for DCBX like:
- Return empty parameters for oper-params query when negotiation is not
complete
- Use the ieee specific mask value for reading the ethtype value in the
ieee dcbx mode
- Endian-ness conversion is not needed for priority<->TC field, as the
data is already being read/written by ecore in the bigendian way
- While writing the ets config, base driver incorrectly merges the input
values with the operational values. The values should be either set
or unset
- CEE selection field must be set regardless CEE/IEEE mode
- Fail the dcbx query for VF interfaces
- Semantic changes
Rasesh Mody [Thu, 5 Jan 2017 07:04:04 +0000 (23:04 -0800)]
net/qede/base: add support for new firmware
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Rasesh Mody [Thu, 5 Jan 2017 07:03:59 +0000 (23:03 -0800)]
net/qede/base: retrieve FW crash dump info
As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Rasesh Mody [Thu, 5 Jan 2017 07:03:51 +0000 (23:03 -0800)]
net/qede/base: improve Tx-switching performance
In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.
Wenzhuo Lu [Wed, 21 Dec 2016 08:29:40 +0000 (16:29 +0800)]
net/i40e: fix wrong return value when handling PF message
When VF receives a message from PF, it should check the return
value. But in i40evf_execute_vf_cmd the value is ignored and not
returned to the caller.
Fixes: 95cd21f45d1b ("i40evf: allocate virtchnl commands buffer per VF") Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Jerin Jacob [Tue, 27 Dec 2016 10:09:57 +0000 (15:39 +0530)]
net/ixgbe: remove unused global variable
Removed unused "reg_info" global variable from ixgbe driver.
cat build/app/testpmd.map | grep "Allocating common symbols" -A 15
Allocating common symbols
Common symbol size file
reg_info 0x18 build/lib/librte_pmd_ixgbe.a(ixgbe_ethdev.o)
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Alejandro Lucero [Mon, 19 Dec 2016 16:13:03 +0000 (16:13 +0000)]
net/nfp: avoid modulo operations for handling ring wrapping
Having those modulo operations implies costly instructions execution,
what can be avoided with conditionals and unlikely clauses.
This change makes the software ring read and write indexes to be now
always within the ring size which has to be handled properly. The main
problem is when write pointer wraps and being less than the read pointer.
This happened before, but just with indexes type size (uint32_t) wrapping,
and in that case the processor does the right thing no requiring special
handling by software.
This work has also led to discovering redundant pointers in the driver,
which have been removed.
Rasesh Mody [Fri, 23 Dec 2016 00:50:04 +0000 (16:50 -0800)]
net/qede/base: fix VF over legacy PF
Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].
Rasesh Mody [Fri, 23 Dec 2016 00:50:02 +0000 (16:50 -0800)]
net/qede/base: fix Rx queue access by malicious VFs
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Rasesh Mody [Fri, 23 Dec 2016 00:49:59 +0000 (16:49 -0800)]
net/qede/base: fix multiple acquisition requests by VF
There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.
Rasesh Mody [Fri, 23 Dec 2016 00:49:57 +0000 (16:49 -0800)]
net/qede: add vendor/device id info
The vendor_id and device_id are used to determine device type. If you
don't have them, then check for determining device type fails and is
always set to default device type.
Fixes: ec94dbc57362 ("qede: add base driver") Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Harish Patil [Fri, 23 Dec 2016 00:48:11 +0000 (16:48 -0800)]
net/qede: restrict maximum queues for PF/VF
HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.
Harish Patil [Fri, 23 Dec 2016 00:48:09 +0000 (16:48 -0800)]
net/qede: fix RSS
This patch includes the following:
- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
instead make use of existing RSS APIs for default RSS configuration
Harish Patil [Fri, 23 Dec 2016 00:48:06 +0000 (16:48 -0800)]
net/qede: fix filtering code
In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.
Wei Dai [Wed, 21 Dec 2016 09:48:12 +0000 (17:48 +0800)]
net/ixgbe/base: add write flush required by Inphi PHY
This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).
Wei Dai [Wed, 21 Dec 2016 09:48:10 +0000 (17:48 +0800)]
net/ixgbe/base: fix IXGBE LSWFW register
This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.
Fixes: af75078fece3 ("first public release") Signed-off-by: Wei Dai <wei.dai@intel.com>
Wei Dai [Wed, 21 Dec 2016 09:48:08 +0000 (17:48 +0800)]
net/ixgbe/base: add EEE support for some PHYs
This patch adds Energy Efficient Ethernet (EEE) support for
some Marvell PHYs on some future platforms.
Because EEE capability or status was not indicated previously,
this patch simply assumes that it is supported.
As soon as there is a PHY that does not support EEE, there will
be defects in this area because the driver will not report the
EEE status correctly.
This also deletes some now-unused definitions from an earlier
Marvell PHY implementation and combines a device ID check into a
switch statement.
Wei Dai [Wed, 21 Dec 2016 09:48:07 +0000 (17:48 +0800)]
net/ixgbe/base: update FW PHY flow control
This patch removes the flow control conversion from Rx and Tx to pause
and asymmetric pause, as that is handled by the ixgbe_negotiate_fc().
Performing the conversion prior to ixgbe_negotiate_fc() results in
an incorrect fc mode if Rx only pause is selected when the link partner
is advertising Tx.
Wei Dai [Wed, 21 Dec 2016 09:48:04 +0000 (17:48 +0800)]
net/ixgbe/base: add physical layer options for FW PHY type
The "FW" PHY type now supports speeds 10M, 100M, and 1G.
Previously, only the 1G speed was reported for this PHY type.
Add reporting 10M and 100M speed options.
Wei Dai [Wed, 21 Dec 2016 09:48:02 +0000 (17:48 +0800)]
net/ixgbe/base: include new speeds in VFLINK interpretation
This patch moves some of the extended speeds that come with X552
(5G, 2.5G, 10M) into the link check functions.
It also now returns speed_unknown for speeds that are not known
how to interpret.
git.droids-corp.org / dpdk.git / log