Jasvinder Singh [Wed, 16 Oct 2019 14:17:29 +0000 (15:17 +0100)]
sched: support 64-bit values
Modify internal structure and functions to support 64-bit
values for rates and stats parameters.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Jasvinder Singh [Wed, 16 Oct 2019 14:17:28 +0000 (15:17 +0100)]
sched: add 64-bit values
To support high bandwidth network interfaces, all rates (port,
subport level token bucket and traffic class rates, pipe level
token bucket and traffic class rates) and stats counters defined
in public data structures (rte_sched.h) are modified to support
64 bit counters.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:24 +0000 (11:51 +0100)]
sched: remove redundant code
Remove redundant data structure fields from port level data
structures and update the release notes.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:23 +0000 (11:51 +0100)]
examples/qos_sched: add subport config flexibility
Modify qos sample app to allow different subports of the same port
to have different configuration in terms of number of pipes, pipe
queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:22 +0000 (11:51 +0100)]
examples/ip_pipeline: add subport config flexibility to TM
Modify ip pipeline traffic management function to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:21 +0000 (11:51 +0100)]
net/softnic: add subport config flexibility to TM
Modify softnic traffic management function to allow different
subports of the same port to have different configuration in
terms of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:20 +0000 (11:51 +0100)]
test/sched: add subport config flexibility
Modify tests function to allow different subports of the same port
to have different configuration in terms of number of pipes, pipe
queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:19 +0000 (11:51 +0100)]
sched: update queue stats read for config flexibility
Modify pipe queue stats read function to allow different subports
of the same port to have different configuration in terms of number
of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:18 +0000 (11:51 +0100)]
sched: update pkt dequeue for flexible config
Modify scheduler packet dequeue operation to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:17 +0000 (11:51 +0100)]
sched: update grinder functions for config flexibility
Modify packet grinder functions of the schedule to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:16 +0000 (11:51 +0100)]
sched: update memory compute to support flexiblity
Update memory footprint compute function for allowing subports of
the same port to have different configuration in terms of number of
pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:15 +0000 (11:51 +0100)]
sched: modify pkt enqueue for config flexibility
Modify scheduler packet enqueue operation of the scheduler to allow
different subports of the same port to have different configuration
in terms of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:14 +0000 (11:51 +0100)]
sched: modify pipe functions for config flexibility
Modify pipe level functions to allow different subports of the same
port to have different configuration in terms of number of pipes,
pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:13 +0000 (11:51 +0100)]
sched: add pipe config to subport level
Add pipes configuration from the port level to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:12 +0000 (11:51 +0100)]
sched: remove pipe params config from port level
Remove pipes configuration from the port level to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:11 +0000 (11:51 +0100)]
sched: modify internal structs for config flexibility
Update internal structures related to port and subport to allow
different subports of the same port to have different configuration
in terms of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Jasvinder Singh [Fri, 25 Oct 2019 10:51:10 +0000 (11:51 +0100)]
sched: add pipe config params to subport struct
Add pipe configuration parameters to subport level structure to
allow different subports of the same port to have different
configuration in terms of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Ting Xu [Mon, 21 Oct 2019 10:00:01 +0000 (10:00 +0000)]
net/ice: add GTP tunnel type
Add GTP tunnel type in ice pmd tunneling parameters parse
to enable Tx checksum offload.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ting Xu [Mon, 21 Oct 2019 10:00:00 +0000 (10:00 +0000)]
mbuf: add GTP tunnel type
Add GTP tunnel type flag in mbuf for future use in GTP
Tx checksum offload.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Yahui Cao [Wed, 23 Oct 2019 14:00:30 +0000 (22:00 +0800)]
app/testpmd: increase RSS max queue size
Max queue indices ACTION_RSS_QUEUE_NUM , which limits testpmd actions
rss queue size, has worked for a long time.
As more powered PMD is merged, more RSS queues are supported(e.g. Intel
ice driver FDIR supports up to 128 RSS queue numbers).
The original max queue indices number doesn't satisfy PMD's requirement
and it needs to become bigger.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Gagandeep Singh [Wed, 23 Oct 2019 06:06:02 +0000 (11:36 +0530)]
net/enetc: enable dpaax library
dpaaX is used to maintain a local copy of PA->VA translations.
Using the rte_mem_virt2iova or rte_mem_virt2phy is expensive. This
library is an attempt to reduce the overall cost associated with
this translation.
This patch enables this dpaaX library by populating a dpaaX's
table for PA to VA translation. This change will also help the
caam JR driver in PA to VA translation when used with enetc driver
over enetc supported SoCs.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Gagandeep Singh [Wed, 23 Oct 2019 06:06:01 +0000 (11:36 +0530)]
net/enetc: print MAC address logs at notice level
To display random MAC address as notice,
a log level NOTICE is added.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Gagandeep Singh [Wed, 23 Oct 2019 06:06:00 +0000 (11:36 +0530)]
net/enetc: set random MAC in case no MAC for SI
for SGMII interfaces, there can be 0 value
written on MAC registers.
This patch set the random MAC address for those
interfaces.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Gagandeep Singh [Wed, 23 Oct 2019 06:05:59 +0000 (11:35 +0530)]
net/enetc: fix BD ring alignment
enetc BD rings should be aligned to 128
instead of RTE_CACHE_LINE_SIZE.
Fixes:
469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Matan Azrad [Tue, 22 Oct 2019 07:33:35 +0000 (07:33 +0000)]
net/mlx5: fix DevX event registration timing
The DevX counter management triggers an asynchronous event to get back
the new counters values from the HW.
The counter management doesn't trigger 2 parallel events for the same
pool, hence, the pool cannot be updated again in the event waiting time.
When the port is stopped, the DevX event mechanism wrongly was
destroyed what remained all the waiting pools in waiting state forever.
As a result, the counters of the stuck pools were never updated again.
Separate the DevX interrupt installation from the dev installation and
remove the DevX interrupt unregistration\registration from the
stop\start operations.
Now, the DevX interrupt should be installed in probe and uninstalled in
close.
Cc: stable@dpdk.org
Fixes:
f15db67df09c ("net/mlx5: accelerate DV flow counter query")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Wei Zhao [Tue, 22 Oct 2019 06:39:26 +0000 (14:39 +0800)]
net/ice: fix queue index for switch filter
When calculate queue index for queue action in
switch filter, vsi base queue should be included.
Fixes:
57c4f2693588 ("net/ice: enable switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Ciara Loftus [Mon, 30 Sep 2019 16:42:05 +0000 (16:42 +0000)]
net/af_xdp: support unaligned umem chunks
This patch enables the unaligned chunks feature for AF_XDP which allows
chunks to be placed at arbitrary places in the umem, as opposed to them
being required to be aligned to 2k. This allows for DPDK application
mempools to be mapped directly into the umem and in turn enable zero copy
transfer between umem and the PMD.
This patch replaces the zero copy via external mbuf mechanism introduced
in commit
e9ff8bb71943 ("net/af_xdp: enable zero copy by external mbuf").
The pmd_zero copy vdev argument is also removed as now the PMD will
auto-detect presence of the unaligned chunks feature and enable it if so
and otherwise fall back to copy mode if not detected.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Kiran Kumar K [Tue, 22 Oct 2019 04:16:48 +0000 (09:46 +0530)]
ethdev: add HIGIG2 key field to flow API
Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in Broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/
2301468/HiGig_protocol.pdf
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Ciara Power [Mon, 21 Oct 2019 12:22:38 +0000 (13:22 +0100)]
drivers/net: enable promiscuous and multicast by default
The promiscuous and multicast fields are now initialised as enabled for
some virtual PMDs. This allows the devices to be used when running
applications that attempt to enable promiscuous or multicast mode.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ciara Power [Mon, 21 Oct 2019 12:22:37 +0000 (13:22 +0100)]
ethdev: check device promiscuous state
The promiscuous enable and disable functions now check the
promiscuous state of the device before checking if the dev_ops
function exists for the device.
This change is necessary to allow sample applications run on
virtual PMDs, as previously -ENOTSUP returned when the promiscuous
enable function was called. This caused the sample application to
fail unnecessarily.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Flavia Musatescu [Fri, 18 Oct 2019 14:24:31 +0000 (15:24 +0100)]
net/af_packet: improve Tx statistics accuracy
When sendto call fails and ENOBUFS/EAGAIN error is being set
some of the packets are actually successfully transmitted.
There is no available count of those packets, so in order to
make the statistics more accurate, all the previously enqueued
packets will be considered successful, even though this is not
entirely correct.
Statistics numbers before this update:
Pktgen:
Total Rx Pkts:
1360084
Tx Pkts:
2000000
testpmd:
RX-packets:
1408346 RX-missed: 0 RX-bytes:
84503418
TX-packets: 526486 TX-errors: 881851 TX-bytes:
31589724
Statistics numbers after this update:
Pktgen:
Total Rx Pkts:
1329872
Tx Pkts:
2000000
testpmd:
RX-packets:
1389156 RX-missed: 0 RX-bytes:
83349360
TX-packets:
1389156 TX-errors: 0 TX-bytes:
83349360
Fixes:
74b7fc0a0ff1 ("net/af_packet: fix packet bytes counting")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Xiaoyu Min [Thu, 17 Oct 2019 10:49:46 +0000 (13:49 +0300)]
net/mlx5: fix crash on hash Rx queue handling for drop
When to create hrxq for the drop, it could fail on creating qp and goto
the error handle which will release created ind_table by calling drop
release function, which takes rte_ethdev as the only parameter and uses
the priv->drop_queue.hrxq as input to release.
Unfortunately, at this point, the hrxq is not allocated and
priv->drop_queue.hrxq is still NULL, which leads to a segfault.
This patch fixes the above by allocating the hrxq at first place and
when the error happens, hrxq is released as the last one.
This patch also release other allocated resources by the correct order,
which is missing previously.
Fixes:
78be885295b8 ("net/mlx5: handle drop queues as regular queues")
Cc: stable@dpdk.org
Reported-by: Zengmo Gao <gaozengmo@jd.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Simei Su [Mon, 21 Oct 2019 12:06:52 +0000 (20:06 +0800)]
net/ice: enable advanced RSS
This patch supports:
- symmetric hash by rte_flow RSS action.
- input set change by rte_flow RSS action.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Simei Su [Mon, 21 Oct 2019 12:06:50 +0000 (20:06 +0800)]
net/ice: add RSS configuration for GTPU/PPPoE
This patch adds rss support for gtpu with input set teid and
pppoe/pppod with input set source mac and session id.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Harry van Haaren [Wed, 9 Oct 2019 15:20:06 +0000 (16:20 +0100)]
net/i40e: support flow director on AVX Rx
This commit adds FDIR ID support to the AVX2 based receive
path routine. Support for both 16B and 32B descriptors is
implemented.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Harry van Haaren [Wed, 9 Oct 2019 15:20:05 +0000 (16:20 +0100)]
net/i40e: support flow director on SSE Rx
This commit adds an implementation to the SSE vector implementation of
RX routine and moves some common defines from a c file to the header
file.
I40e can have 16 and 32 byte descriptors, and the Flow
Director ID data and indication-bit are in different locations
for each size descriptor. The support is implemented in two
separate functions as they require vastly different operations.
The 16B descriptor re-purposes the "filter-status" u32 field
to indicate FDIR ID when the FLM bit is set. No extra loads
are required, however we do have to store to mbuf->fdir.hi,
which is not stored to in the RX path before this patch.
The 32B descriptor requires loading the 2nd 16 bytes of each
descriptor, to get the FLEXBH_STAT and FD Filter ID from
qword3. The resulting data must also be stored to mbuf->fdir.hi,
same as the 16B code path.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Harry van Haaren [Wed, 9 Oct 2019 15:20:04 +0000 (16:20 +0100)]
net/i40e: cache flow director enable value in Rx queue
This commit adds a fdir_enable flag in a uint8_t sized hole
the rx queue structure The flag enables the rx code path to
easily identify if fdir is active. This can be used to skip
fdir id processing when it is not required.
The flag is zero by default (as rxq is zmalloc-ed at startup),
and the flag is set to 1 on configuration of a flow director rule.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Pallantla Poornima [Thu, 19 Sep 2019 11:01:47 +0000 (12:01 +0100)]
net/axgbe: fix double unlock
One issue caught by Coverity 340835
*unlock: axgbe_phy_set_mode unlocks pdata->phy_mutex
*double_unlock: axgbe_phy_sfp_detect unlocks pdata->phy_mutex
while it is unlocked.
In axgbe_phy_sfp_detect()/axgbe_phy_set_redrv_mode(),
axgbe_phy_get_comm_ownership() and axgbe_phy_put_comm_ownership()
are invoked subsequently.
Currently in axgbe_phy_get_comm_ownership(), during one of the case
'phy_data->comm_owned' is not protected and before returning 0, lock is
not called and unlock is called in axgbe_phy_put_comm_ownership()
directly which is incorrect.
Ideally, the variable 'phy_data->comm_owned' needs to be protected.
During success scenario, lock is called in
axgbe_phy_get_comm_ownership() followed by unlock in
axgbe_phy_put_comm_ownership(). In failure case, unlock is invoked in
axgbe_phy_get_comm_ownership() itself appropriately.
The fix is to protect 'phy_data->comm_owned' in the identified case
ensuring locks/unlocks properly exist.
Coverity issue: 340835
Fixes:
a5c7273771e8 ("net/axgbe: add phy programming APIs")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Leyi Rong [Wed, 16 Oct 2019 08:14:09 +0000 (16:14 +0800)]
net/iavf: enable AVX2 for iavf
This patch enables AVX data path for iavf PMD.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Moti Haimovsky [Wed, 16 Oct 2019 08:36:10 +0000 (11:36 +0300)]
net/mlx5: add flow match on GENEVE item
This commit adds support for matching flows on Geneve headers.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Moti Haimovsky [Wed, 16 Oct 2019 08:36:09 +0000 (11:36 +0300)]
net/mlx5: query HCA for enabled FLEX parser protocols
This commit add querying the HCA which FLEX protocols are already
enabled.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Moti Haimovsky [Wed, 16 Oct 2019 07:34:03 +0000 (10:34 +0300)]
net/mlx5: retry on link update failure
mlx5_link_update immediately returns when called with no-wait parameter
and its call for retrieving the link status returns with EAGAIN error.
This is too harsh on busy systems where a first call fails with EAGAIN
from time to time.
This patch adds a (very limited) retry on such cases in order to allow
retrieving the link status.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Ali Alnubani [Thu, 17 Oct 2019 07:19:31 +0000 (10:19 +0300)]
net/mlx5: fix build with strict alignment enabled
This patch converts some of the casts to unaligned integer types.
The memcpy call is replaced with explicit copying because it
may require type qualifiers in some environments.
Fixes:
18a1c20044c0 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Reported-by: Jeremy Plsek <jplsek@iol.unh.edu>
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Viacheslav Ovsiienko [Mon, 14 Oct 2019 15:39:14 +0000 (15:39 +0000)]
net/mlx5: fix Tx packets statistics
The transmitter packets counter was not updated
correctly in the loop inside the tx_burst routines.
Fixes:
f32a3f5216a3 ("net/mlx5: fix completion queue overflow for large burst")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
David Marchand [Wed, 2 Oct 2019 14:24:10 +0000 (16:24 +0200)]
net/mlx4: remove dependency on libmnl in meson
There is no dependency on this library for mlx4.
Fixes:
1dd7c7e38c19 ("net/mlx4: support meson build")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Ciara Power [Fri, 18 Oct 2019 15:45:40 +0000 (16:45 +0100)]
app/testpmd: fix help for loop topology option
The testpmd --help option did not show all possible choices for port
topology previously. The loop topology option is now added.
Fixes:
3e2006d6186c ("app/testpmd: add loopback topology")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
David Marchand [Fri, 27 Sep 2019 11:58:02 +0000 (13:58 +0200)]
net: add missing endianness annotations
OVS currently maintains a copy of those headers with the right endianness
annotations so that sparse checks can pass.
We introduced rte_beXX_t for better readibility in v17.08.
Let's make use of them, OVS then only needs to override those rte_beXX_t
types by exposing a tweaked rte_byteorder.h header.
Other existing dpdk users won't be affected since rte_beXX_t types are
mapped to uintXX_t types.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Thierry Herbelot [Fri, 18 Oct 2019 15:06:57 +0000 (17:06 +0200)]
doc: fix a common typo in NIC guides
'CRC striping' should be spelled 'CRC stripping'.
Fixes:
3eee1f067e7c ("fm10k: add guide")
Fixes:
7a4d9f6676d7 ("doc: add liquidio")
Fixes:
f820b5896631 ("doc: add octeontx ethdev driver documentation")
Fixes:
920717e4d8ba ("net/octeontx2: add device start operation")
Fixes:
f994cecafdcf ("doc: add ThunderX nicvf")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ferruh Yigit [Tue, 15 Oct 2019 07:38:00 +0000 (08:38 +0100)]
maintainers: add next-net-brcm sub-tree
Adding vendor specific sub-tree for Broadcom drivers.
The next-net-brcm sub-tree will be sub-tree of the next-net.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Vamsi Attunuru [Tue, 15 Oct 2019 10:44:21 +0000 (16:14 +0530)]
net/octeontx2: support multicast filter
Patch adds mc filter support for otx2 eth devices.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Nithin Dabilpuram [Mon, 14 Oct 2019 09:41:57 +0000 (15:11 +0530)]
common/octeontx2: upgrade mbox definition to version 2
Sync mail box data structures to version 0x0002.
This patch checks for mismatch in mail box revision and
avoids initializing octeontx2 pci device if
there is a mismatch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Ying A Wang [Thu, 17 Oct 2019 18:31:59 +0000 (02:31 +0800)]
net/ice: cleanup RSS/FDIR profile on device init
When app restarts, RSS/FDIR profile ID will increase which may
run out of all the profile resources.
The patch cleanup RSS/FDIR profile resources when device init
to fix this issue.
Fixes:
d7d150b93070 ("net/ice: enable RSS when device init")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:16:02 +0000 (19:16 +0800)]
net/ice: support flow director GTPU tunnel
Enable FDIR GTPU matching for RTE_FLOW
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:16:01 +0000 (19:16 +0800)]
net/ice: support flow director VXLAN tunnel
Enable FDIR vxlan tunnel matching for RTE_FLOW
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:16:00 +0000 (19:16 +0800)]
net/ice: reject duplicated flow for flow director
Enable duplication lookup for existing flow director rule entry.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:15:59 +0000 (19:15 +0800)]
net/ice: support flow director counter
This patch add FDIR statistical counter support
and it includes RTE_FLOW count actions support
and query support.
RTE_FLOW count actions support id and shared.
RTE_FLOW query record packet hits by default.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:15:58 +0000 (19:15 +0800)]
net/ice: add flow director counter resource init/release
The patch integrates the counter resource init/release into fdir's
init/release scenario
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:15:57 +0000 (19:15 +0800)]
net/ice: enable flow director queue group
FDIR can send packet to a group of queues and distruibte it by RSS.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Yahui Cao [Fri, 18 Oct 2019 11:15:56 +0000 (19:15 +0800)]
net/ice: add flow director create and destroy
Add ice_create_fdir_filter to create a rule. If a flow is matched by
flow director filter, filter rule will be set to HW. For now common
pattern and queue/passthru/drop/mark actions are supported.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Beilei Xing [Fri, 18 Oct 2019 11:15:55 +0000 (19:15 +0800)]
net/ice: configure HW flow director rule
This patch adds a HW FDIR rule to the FDIR HW table
without adding a FDIR filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Beilei Xing [Fri, 18 Oct 2019 11:15:54 +0000 (19:15 +0800)]
net/ice: enable flow director engine
Enable flow director engine, including initialization and teardown.
- Control VSI create and release.
- Queue pair allocated, set up and release.
- Programming packet create and release.
- FDIR profile create and release.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Simei Su [Tue, 15 Oct 2019 15:09:49 +0000 (23:09 +0800)]
app/testpmd: support extended RSS offload types
This patch adds cmdline support for extended rss types configuration.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Simei Su [Tue, 15 Oct 2019 15:09:48 +0000 (23:09 +0800)]
ethdev: extend RSS offload types
This patch reserves several bits as input set selection from the
high end of the 64 bits. It is combined with exisiting ETH_RSS_*
to represent RSS types. This patch also checks the simultaneous
use of SRC_ONLY and DST_ONLY of the same level.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Simei Su [Tue, 15 Oct 2019 15:09:47 +0000 (23:09 +0800)]
ethdev: decouple flow types and RSS offload types
This patch decouples RTE_ETH_FLOW_* and ETH_RSS_*. The former defines
flow types and the latter defines RSS offload types.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Joyce Kong [Tue, 24 Sep 2019 05:48:45 +0000 (13:48 +0800)]
net/ixgbe: fix address of first segment
This patch fixes (dereference after null check) coverity issue.
The address of first segmented packets was not set correctly during
reassembling packets which led to this issue.
Coverity issue: 13245
Fixes:
8a44c15aa57d ("net/ixgbe: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Joyce Kong [Tue, 24 Sep 2019 05:48:44 +0000 (13:48 +0800)]
net/i40e: fix address of first segment
This patch fixes (dereference after null check) coverity issue.
The address of first segmented packets was not set correctly during
reassembling packets which led to this issue.
Coverity issue: 343422, 343403
Fixes:
ca74903b75cf ("net/i40e: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Leyi Rong [Wed, 16 Oct 2019 06:24:46 +0000 (14:24 +0800)]
net/ice: invoke callback when link status change
Needs to call _rte_eth_dev_callback_process to run registered
callbacks when link status change.
Fixes:
cf911d90e366 ("net/ice: support link update")
Cc: stable@dpdk.org
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Wei Zhao [Wed, 16 Oct 2019 18:33:56 +0000 (02:33 +0800)]
net/ice: rework switch filter
The patch reworks packet process engine's binary classifier
(switch) for the new framework. It also adds support for new
packet type like PPPoE for switch filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Ying A Wang [Wed, 16 Oct 2019 18:33:55 +0000 (02:33 +0800)]
net/ice: add pattern manifest
The patch adds a manifest for all patterns which can be selected
by low level filter engine to compose their supported list.
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Ying A Wang [Wed, 16 Oct 2019 18:33:54 +0000 (02:33 +0800)]
net/ice: rework for generic flow enabling
The patch reworks the generic flow API (rte_flow) implementation.
It introduces an abstract layer which provides a unified interface
for low-level filter engine (switch, fdir, hash) to register supported
patterns and actions and implement flow validate/create/destroy/flush/
query activities.
The patch also removes the existing switch filter implementation to
avoid compile error. Switch filter implementation for the new framework
will be added in the following patch.
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Qiming Yang [Wed, 16 Oct 2019 18:33:53 +0000 (02:33 +0800)]
net/ice: add devargs to control pipeline mode
Added a devarg to control the mode in generic flow API.
We use none-pipeline mode by default.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Ying A Wang [Wed, 16 Oct 2019 18:33:52 +0000 (02:33 +0800)]
net/ice: clean up redundant assignment and indentations
The patch removes redundant code and cleans up some wrong indentations.
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Flavio Leitner [Tue, 15 Oct 2019 18:59:51 +0000 (15:59 -0300)]
vhost: improve performance by supporting large buffer
The rte_vhost_dequeue_burst supports two ways of dequeuing data.
If the data fits into a buffer, then all data is copied and a
single linear buffer is returned. Otherwise it allocates
additional mbufs and chains them together to return a multiple
segments mbuf.
While that covers most use cases, it forces applications that
need to work with larger data sizes to support multiple segments
mbufs. The non-linear characteristic brings complexity and
performance implications to the application.
To resolve the issue, add support to attach external buffer
to a pktmbuf and let the host provide during registration if
attaching an external buffer to pktmbuf is supported and if
only linear buffer are supported.
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Andrew Rybchenko [Tue, 15 Oct 2019 08:11:27 +0000 (09:11 +0100)]
net/virtio: fix descriptor addressed in Tx
Previous fix removes usage of rte_pktmbuf_prepend() to get pointer
to virtio net header which changes mbuf data_off and data_len.
Size of virtio net header is added to segment length when Tx descriptor
is composed, but segment address (calculated using data_off) is not
adjusted to take size of virtio net header into account.
Fixes:
1ae55ad38e5e ("net/virtio: fix mbuf data and packet length mismatch")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Jin Yu [Wed, 9 Oct 2019 20:48:36 +0000 (04:48 +0800)]
vhost: add packed ring support to vring related APIs
This patch add packed ring support in two APIs
so user can get the packed ring`.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:35 +0000 (04:48 +0800)]
vhost: add APIs to get inflight ring
This patch introduces two APIs. one is for getting inflgiht
ring and the other is for getting base.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:34 +0000 (04:48 +0800)]
vhost: add APIs to operate inflight ring
This patch introduces three APIs to operate the inflight
ring. Three APIs are set, set last and clear. It includes
split and packed ring.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:33 +0000 (04:48 +0800)]
vhost: checkout resubmit inflight information
This patch shows how to checkout the inflight ring and construct
the resubmit information also include destroying resubmit info.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:32 +0000 (04:48 +0800)]
vhost: support inflight info sharing
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared
buffer between qemu and backend.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:31 +0000 (04:48 +0800)]
vhost: add inflight structures
This patch adds the inflight queue region structure include
the split and packed.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:30 +0000 (04:48 +0800)]
vhost: add packed ring into vring struct
This patch add the packed ring in the rte_vhost_vring.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jin Yu [Wed, 9 Oct 2019 20:48:29 +0000 (04:48 +0800)]
vhost: add inflight description
This patch add the inflight message description and
the inflight share fd protocol feature flag.
Signed-off-by: Lin Li <lilin24@baidu.com>
Signed-off-by: Xun Ni <nixun@baidu.com>
Signed-off-by: Yu Zhang <zhangyu31@baidu.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Wed, 9 Oct 2019 11:54:32 +0000 (13:54 +0200)]
vhost: prevent zero copy mode if IOMMU is on
The simultaneous use of dequeue_zero_copy and IOMMU is problematic.
Not only because IOVA_VA mode is not supported but also because the
potential invalidation of guest pages while the buffers are in use,
is not handled.
Prevent these two features to be enabled simultaneously.
Fixes:
69c90e98f483 ("vhost: enable IOMMU support")
Cc: stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Wed, 9 Oct 2019 11:54:31 +0000 (13:54 +0200)]
vhost: convert buffer addresses to GPA for logging
Add IOVA versions of dirty page logging functions.
Note that the API facing rte_vhost_log_write is not modified.
So, make explicit that it expects the address in GPA space.
Fixes:
69c90e98f483 ("vhost: enable IOMMU support")
Cc: stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adrian Moreno [Wed, 9 Oct 2019 11:54:30 +0000 (13:54 +0200)]
vhost: translate incoming log address to GPA
When IOMMU is enabled the incoming log address is in IOVA space. In that
case, look in IOTLB table and translate the resulting HVA to GPA.
If IOMMU is not enabled, the incoming log address is already a GPA so no
transformation is needed.
Fixes:
69c90e98f483 ("vhost: enable IOMMU support")
Cc: stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
David Christensen [Mon, 30 Sep 2019 18:42:16 +0000 (11:42 -0700)]
net/virtio: fix Rx AltiVec path by getting all packets
The loop to read packets does not take all packets as the number of
available packets (nb_used) is decremented in the loop.
Fixes:
52b5a707e6ca ("net/virtio: add Altivec Rx")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
David Christensen [Mon, 30 Sep 2019 18:27:54 +0000 (11:27 -0700)]
net/virtio: fix Rx stats on AltiVec path
With vectorized functions, only the rx stats for number of packets is
incremented.
Update also the other statistics.
Fixes:
52b5a707e6ca ("net/virtio: add Altivec Rx")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Joyce Kong [Tue, 17 Sep 2019 05:28:26 +0000 (13:28 +0800)]
net/virtio: improve perf via one-way barriers on used flag
In case VIRTIO_F_ORDER_PLATFORM(36) is not negotiated, then the frontend
and backend are assumed to be implemented in software, that is they can
run on identical CPUs in an SMP configuration.
Thus a weak form of memory barriers like rte_smp_r/wmb, other than
rte_cio_r/wmb, is sufficient for this case(vq->hw->weak_barriers == 1)
and yields better performance.
For the above case, this patch helps yielding even better performance
by replacing the two-way barriers with C11 one-way barriers for used
flags in packed ring.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Joyce Kong [Tue, 17 Sep 2019 05:28:25 +0000 (13:28 +0800)]
net/virtio: improve perf via one-way barrier on avail flag
In case VIRTIO_F_ORDER_PLATFORM(36) is not negotiated, then the frontend
and backend are assumed to be implemented in software, that is they can
run on identical CPUs in an SMP configuration.
Thus a weak form of memory barriers like rte_smp_r/wmb, other than
rte_cio_r/wmb, is sufficient for this case(vq->hw->weak_barriers == 1)
and yields better performance.
For the above case, this patch helps yielding even better performance
by replacing the two-way barriers with C11 one-way barriers for avail
flags in packed ring.
Meanwhile, a read barrier is required to ensure ordering between
descriptor's flags and content reads [1]. With C11, load-acquire can
enforce the ordering instead of rmb barrier.
[1] https://patchwork.dpdk.org/patch/49109/
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Leyi Rong [Tue, 15 Oct 2019 07:50:34 +0000 (15:50 +0800)]
net/ice: support RSS in AVX path
Support 32 bits RSS in FlexMD fields in AVX path.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Leyi Rong [Tue, 15 Oct 2019 07:50:33 +0000 (15:50 +0800)]
net/ice: support RSS in SSE path
Support 32 bits RSS in FlexMD fields in SSE path.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Simei Su [Fri, 11 Oct 2019 05:12:27 +0000 (13:12 +0800)]
net/ice: fix LUT type for RSS
This patch changes RSS lut_type to corresponding macro.
Fixes:
ff963bfa7cb1 ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Xiao Zhang [Tue, 15 Oct 2019 05:29:19 +0000 (13:29 +0800)]
net/i40e: fix integer overflow
When configuring i40e rx queue, the temporary variable to store max
packet length is not big enough which leads to integer overflow issue.
This patch fixes the issue by removing the variable and using the
expression directly since the variable is only used once.
Fixes:
4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Haiyue Wang [Mon, 14 Oct 2019 14:50:05 +0000 (22:50 +0800)]
net/ice: fix protocol extraction devargs parsing
If the default dev args 'proto_xtr' is not in the first position, it
will overwrite the parsed queue map value, so use an new variable to
save the default.
And enhance the error message printing to show the right information.
Fixes:
7e124ff12c85 ("net/ice: support protocol extraction per Rx queue")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Haiyue Wang [Mon, 14 Oct 2019 14:50:04 +0000 (22:50 +0800)]
net/ice: fix memory leak on dev closed
The original protocol extraction memory free is removed by introducing
new design for releasing port upon close.
Fixes:
bd513ece3c40 ("net/ice: release port upon close")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Ting Xu [Tue, 15 Oct 2019 09:14:20 +0000 (09:14 +0000)]
app/testpmd: fix CRC strip command
This patch fixed the bug that a failure appeared when config
rx_offload crc_strip using command "port config all crc-strip
on|off". The reason is that this command was removed in Commit
e5db17a1e54e. The current command is "port config <port_id>
rx_offload keep_crc on|off" instead.
In this patch, some codes left over about 'crc_strip' are
removed to make the current command clearer.
Fixes:
e5db17a1e54e ("app/testpmd: remove duplicated Rx offload commands")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Haiyue Wang [Tue, 15 Oct 2019 07:51:33 +0000 (15:51 +0800)]
app/testpmd: show Rx/Tx burst mode description
Add the 'Burst mode' section into command 'show rxq|txq info <port_id>
<queue_id>' to show the Rx/Tx burst mode description like:
"Burst mode: Vector AVX2 Scattered"
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Haiyue Wang [Tue, 15 Oct 2019 07:51:32 +0000 (15:51 +0800)]
net/ice: support Rx/Tx burst mode info
Retrieve burst mode options according to the selected Rx/Tx burst
function name.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Haiyue Wang [Tue, 15 Oct 2019 07:51:31 +0000 (15:51 +0800)]
net/i40e: support Rx/Tx burst mode info
Retrieve burst mode options according to the selected Rx/Tx burst
function name.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Haiyue Wang [Tue, 15 Oct 2019 07:51:30 +0000 (15:51 +0800)]
ethdev: add API for getting burst mode information
Some PMDs have more than one Rx/Tx burst paths, add the ethdev API
that allows an application to retrieve the mode information about
Rx/Tx packet burst such as Scalar or Vector, and Vector technology
like AVX2.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>