app/testpmd: parse flow command line for ESP

add ITEM_ESP
add ITEM_ESP_SPI
update release notes for testpmd changes
add sample ESP rules in testpmd guide

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>

net/ixgbe: enable NEON in meson

Add missing arm vector build support to meson.build.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ixgbe: add missing stubs for PPC

Add stubs for ixgbe_xmit_fixed_burst_vec,
ixgbe_rx_queue_release_mbufs_vec and
ixgbe_txq_vec_setup

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ixgbe: remove duplicate function declaration

Remove duplicate declarations of ixgbe_xmit_fixed_burst_vec
from ixgbe_rxtx.c

Fixes: 646412f9ff62 ("net/ixgbe: remove limit of Tx burst size")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ixgbe: remove vectorization weak symbols

Remove weak symbols from ixgbe_rxtx.c file as
it is done in i40e driver in commit "02ad704708"
(net/i40e: eliminate weak symbols in data path)

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ixgbe: remove vector config

CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice/base: clean up compatibility layer

Remove the unused definitions, rewrite the IO data read/write helpers,
and put the common definitions related to RTE defines under the macro
__INTEL_NET_BASE_OSDEP__, so it works like OS(RTE) dependency.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

common/iavf: clean up compatibility layer

Remove the unused definitions, rewrite the IO data read/write helpers,
and put the common definitions related to RTE defines under the macro
__INTEL_NET_BASE_OSDEP__, so it works like OS(RTE) dependency.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice: unify bool type value

Replaces the redefined TRUE and FALSE values with standard ones to
match the 'bool' type definition.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/iavf: unify bool type value

Replaces the redefined TRUE and FALSE values with standard ones to
match the 'bool' type definition.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/ice: fix Tx when TSO is enabled

Hardware limits that max buffer size per Tx descriptor should be
(16K-1)B. So when TSO enabled, the mbuf data size may exceed the
limit and cause malicious behavior to the NIC. This patch fixes
this issue by using more Tx descs for this kind of large buffer.

Fixes: 17c7d0f9d6a4 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ixgbe: fix build with gcc 4.8.5

Build error:
  In function ‘ixgbe_recv_pkts_lro_bulk_alloc’:
../drivers/net/ixgbe/ixgbe_rxtx.c:2209:24:
  error: ‘next_sc_entry’ may be used uninitialized in this function
  [-Werror=maybe-uninitialized]
    next_sc_entry->fbuf = first_seg;
                        ^
http://mails.dpdk.org/archives/test-report/2020-January/113891.html

This is a compiler false positive and error not seen by newer compilers,
or clang but to fix the warning initializing the complained variable.

According git bisect, no idea how:
Fixes: ad43b7bce95b ("net/ixgbe: avoid multiple definitions of bool")

Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/mlx5: fix doorbell register offset type

The doorbell register is mapped using mmap() and offset
must have off_t instead of unsigned int. Bug is not critical
due to only least significant bits of offset are currently
tested to determine mapping mode.

Fixes: 8409a28573d3 ("net/mlx5: control transmit doorbell register mapping")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/virtio-user: fix packed ring server mode

This patch fixes the situation where data path does not work properly
when vhost reconnects to virtio in server mode with packed ring.

Currently, virtio and vhost share memory of vring. For split ring, vhost
can read the status of descriptors directly from the available ring and
the used ring during reconnection. Therefore, the data path can
continue.

But for packed ring, when reconnecting to virtio, vhost cannot get the
status of descriptors via the descriptor ring. By resetting Tx
and Rx queues, the data path can restart from the beginning.

Fixes: 4c3f5822eb21 ("net/virtio: add packed virtqueue defines")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: fix deadlock on port deletion

If the vhost-user application (e.g. OVS) deletes the vhost-user
port while Qemu sends a vhost-user request, a deadlock can
happen if the request handler tries to acquire vhost-user's
global mutex, which is also locked by the vhost-user port
deletion API (rte_vhost_driver_unregister).

This patch prevents the deadlock by making
rte_vhost_driver_unregister() to release the mutex and try
again if a request is being handled to give a chance to
the request handler to complete.

Fixes: 8b4b949144b8 ("vhost: fix dead lock on closing in server mode")
Fixes: 5fbb3941da9f ("vhost: introduce driver features related APIs")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>

net/virtio-user: check tap offload setting failure

The function vhost_kernel_tap_set_offload() could return errors,
the return value need to be checked. And there is no need to fail
when error is -ENOTSUP.

Fixes: 1db4d2330bc8 ("net/virtio-user: check negotiated features before set")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

net/virtio: support packed ring notification data

This patch supports the feature that the driver passes extra data
(besides identifying the virtqueue) in its device notifications,
expanding the notifications to include the avail index and avail
wrap counter.

Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: support config change slave message

This msg is used to notify qemu that should get the config of backend.

For example, vhost-user-blk uses this msg to notify guest OS the
capacity of backend has changed.

The need_reply flag is not mandatory because it will block the sender
thread and master process will send get_config message to fetch the
configuration, this need an extra thread to process the vhost message.

Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/virtio-user: do not close tap when disabling queue pairs

Do not close the tap fds when disabling queue pairs, instead,
we just need to unbind the backend. Otherwise, tap port can be
destroyed unexpectedly.

Fixes: e3b434818bbb ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

doc: add more supported speeds in ice guide

The ice PMD supports 10/25/50/100 Gbps.

Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

doc: update recommended versions for i40e

Update supported Intel NIC driver version and firmware version for 19.11
Update supported Intel NIC driver version to 2.8.43 for 19.08 which is
widely tested.

Fixes: cb8a35c22aa9 ("doc: update supported i40e driver and firmware version")
Cc: stable@dpdk.org
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

net/e1000: cleanup Tx buffers

Add support to the igb vf for the API rte_eth_tx_done_cleanup to force
free consumed buffers on Tx ring.

Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/ixgbe: cleanup Tx buffers

Add support to the ixgbe driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.

Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/ice: cleanup Tx buffers

Add support to the ice driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.

Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/i40e: cleanup Tx buffers

Add support to the i40e driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.

Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/octeontx2: fix PTP and HIGIG2 coexistence

octeontx2 PMD does not support both PTP and HIGIG2 together.
Added a check to enforce this and updated the Rx offload capabilities when
Higig2 mode enabled.

Fixes: 602009ee2dfb ("net/octeontx2: support HIGIG2")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/cxgbe: announce Tx multi-segments offload

Multi-segs Tx is already supported by CXGBE PMD. So, add the missing
DEV_TX_OFFLOAD_MULTI_SEGS flag to the list of supported Tx offload
features.

Fixes: 436125e64174 ("net/cxgbe: update to Rx/Tx offload API")
Cc: stable@dpdk.org
Reported-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/enic: move min/max macros

Move a macro from a widely included header file to a header file
used only by the one caller of the macro.

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

net/enic: consolidate and remove some defines

There were defines which originally allowed sharing of some code with
the enic kernel driver. The code has long since diverged and now the
abstraction just makes the code harder to read. Mostly mechanical
replacement of defines and reformatting.

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

net/enic: replace some PMD macros with standard API

Use the memzone namesize, Ethernet address length defines from the RTE
header files instead of locally defined versions.
Use the RTE byte swap functions instead of the x86 specific locally
defined versions.

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

net/netvsc: eliminate NUMA specific allocation

The control messages do not need NUMA specific allocation.
Numa node is not set anyway in most kernels anyway.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

net/netvsc: fix crash in secondary process

The secondary process would crash trying to get the offload
capability of the device. Since the device capabilities were
already set by the primary process this was unnecessary.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

common/octeontx2: support C0 silicon version

Avoid using PCI subsystem device id for SoC revision
identification and just use PCI revision id to support C0 silicon.
This patch also reduces SQB threshold to 70% to have
sufficient buffer before we overflow SQ.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx: add unicast MAC filter

At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

mempool/octeontx: fix error handling in initialization

When octeontx_get_fpavf fails fpa pointer is used to get
pool_stack_base, which is then freed.

Coverity issue: 351263
Fixes: 9bc692f83baa ("mempool/octeontx: add application domain validation")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: improve vector Tx performance

Use scalar loads instead of vector loads for fields
that don't need any vector operations.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/qede: enhance Tx CPU utilization

Use lightweight transmit handler which handles non-offloaded Tx data
path. We get CPU utilization improvement of ~8%.

Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>

net/qede: enhance Rx CPU utilization

Use light weight receive packet handler for non-LRO and
non-scatter packets to improve CPU utilization in receive data path.
We achieved ~18% CPU cycles improvement using this handler.

Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>

net/bnx2x: support secondary process

Skip the device re-initialization for secondary process.

Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/qede/base: fix number of ports per engine

Fix the way in which the number of ports per engine of an adapter is
determined by reading port mode register. Set default value to 1.

Fixes: 3b307c55f2ac ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/octeontx2: allow vector processing packets not by 4

Current vector mode implementation floor-aligns pkt count
with NIX_DESCS_PER_LOOP and process that many packets.

Patch addresses the case where pkt count modulo NIX_DESCS_PER_LOOP
is non-zero, after the vector mode processing, scalar routine is
used to process if there are any leftover packets. Scalar routine
is also used when descriptor head is about to wrap and turn out to
be unaligned.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

common/octeontx2: reduce wait time for mbox messages

After each mbox send operation, context waits for minimum 1ms to get
corresponding response although response can come earlier.
So reducing wait time to lower granularity.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/hns3: fix triggering reset procedure in slave process

Currently, reset related operations can only be performed in the primary
process and are not allowed in the slave process in hns3 PMD driver.

In the internal function interface named hns3_cmd_send used for
communication between driver and firmware, if the wrong head value is
detected in the static subfunction hns3_cmd_csq_clean, driver will
trigger a function level reset to make the hardware work normally again.

This patch adds check condition to prevent triggering reset procedure in
the slave process to avoid failure.

Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix link status on failed query

Currently, the hns3 PMD driver issues command to the firmware and gets
link status information.

When the driver fails to call internal interface function named
hns3_cmd_send to query the status from firmware for some reason, the
link status queried by the driver should be down.

Fixes: 59fad0f32135 ("net/hns3: support link update operation")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix dumping VF register information

Currently, when the API interface named rte_eth_dev_get_reg_info is
called by upper applications based on VF device, it returns error.

We can read registers directly to get ring and interrupt related
information in hns3 PF/VF PMD driver. But for some other internal table
entries and common configuration information, we can get them only
through the command interface between driver and firmware in PF driver,
and VF driver has not the related access permission.

This patch fixes it by preventing getting these information through the
command interface based on VF device in 'get_reg' ops implementation
function.

Fixes: 936eda25e8da ("net/hns3: support dump register")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix ring vector related mailbox command format

The format of the ring vector related mailbox commands between driver
and firmware is different from those of other mailbox commands in hns3
network engine.

This patch fixes the error mailbox command format about the vector of
the rings, the related command opcode as below:
HNS3_MBX_MAP_RING_TO_VECTOR
HNS3_MBX_UNMAP_RING_TO_VECTOR
HNS3_MBX_GET_RING_VECTOR_MAP

Fixes: 463e748964f5 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix crash when closing port

Currently there is a certain probability of segment error in concurrent
reset when the port is closing.
The calltrace info:

This GDB was configured as "aarch64-redhat-linux-gnu".
Reading symbols from /usr/app/testpmd...(no debugging symbols found)...
 done.
[New LWP 98204]
[New LWP 98203]
[New LWP 98206]
[New LWP 98205]
[New LWP 98207]
[New LWP 98208]
Missing separate debuginfo for /root/lib/libnuma.so.1
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/usr/app/testpmd --log-level=6 --socket-mem 16'.
Program terminated with signal 11, Segmentation fault.
Missing separate debuginfos, use:
 debuginfo-install glibc-2.17-260.el7.aarch64
(gdb) bt
in hns3vf_service_handler ()
1  0x00000000006988b8 in eal_alarm_callback ()
2  0x00000000006969b4 in eal_intr_thread_main ()
3  0x0000ffffb08d6c48 in start_thread () from /lib64/libpthread.so.0
4  0x0000ffffb0828600 in thread_start () from /lib64/libc.so.6
(gdb)

Reset process may turn on the cancelled link state timer whether the
current port status is on or off, in order to solve this problem, this
patch add judge the current network port state before starting the
timer, only the port in the running state can start the link state
timer, so as to solve the problem that the link state timer accesses the
null pointer and causes the segment error.

Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix Rx queue search with broadcast packet

Currently, there is a certain probability of a type of RAS errors when
receiving broadcast packets. This type of RAS errors are parsed as
rx_q_search_miss error by hns3 PF PMD driver, the related log as below:
0000:bd:00.0 hns3_find_highest_level(): PPP_MFP_ABNORMAL_INT_ST2
rx_q_search_miss found [error status=0x20000000]

When receiving broadcast packet, network engine select which functions
need to accept it according to the function's promisc_bcast_en bit
configuration. And then search TQP_MAP configuration to select which
hardware queues the packet should enter, if can't find the target
hardware queue, network engine will trigger rx_q_search_miss RAS error.

The root cause as below:
1. VF's promisc_bcast_en bit configuration is not cleared by FLR reset,
   and the configuration has been set in the previous application.
2. There is one bug in setting TQP_MAP configuration in the
   initialization of PF device: when tqp is allocated to VF, it is still
   marked as PF.  This issue will affect the correctness of the TQP_MAP
   configuration.

This patch fixes it with the following modification.
1. Clear all VFs promisc_bcast_en bit in the initialization of PF
   device.
2. Fix the issue to ensure the correct TQP_MAP configuration.

Fixes: d51867db65c1 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: add free threshold in Rx

This patch optimizes the Rx performance by adding the rx_free_thresh
related process in the '.rx_pkt_burst' ops implementation function named
hns3_recv_pkts. The related change as follows:
1. Adding the rx_free_thresh related process to reduce the number of
   writing the HNS3_RING_RX_HEAD_REG register.
2. Adjusting the internal macro named DEFAULT_RX_FREE_THRESH to 32 and
   adjusting HNS3_MIN_RING_DESC to 64 to make the effect of the thresh
   more obvious.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: remove one IO barrier in Rx

When receiving a packet, hns3 hardware network engine firstly writes the
packet content to the memory pointed by the 'addr' field of the Rx
Buffer Descriptor, secondly fills the result of parsing the packet
include the valid field into the Rx Buffer Descriptor in one write
operation, and thirdly writes the number of the Buffer Descriptor not
processed by the driver to the HNS3_RING_RX_FBDNUM_REG register.

This patch optimizes the Rx performance by removing one rte_io_rmb call
in the '.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
The change as follows:
1. Driver no longer read HNS3_RING_RX_FBDNUM_REG register, so remove one
   rte_io_rmb call, and directly read the valid flag of Rx Buffer
   Descriptor to check whether the BD is ready.
2. Delete the non_vld_descs field from the statistic information of the
   hns3 driver because now it has become a common case that the valid
   flag of Rx Buffer Descriptor read by the driver is invalid.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: reduce judgements of free Tx ring space

This patch reduces the number of the judgement of the free Tx ring space
in the 'tx_pkt_burst' ops implementation function to avoid performance
loss. According to hardware constraints, we need to reserve a Tx Buffer
Descriptor in the TX ring in hns3 network engine.

Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: support setting VF MAC address by PF driver

Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.

This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
   device before the initialization of the related VF device, hns3 VF
   PMD driver should get the MAC address from PF driver through mailbox
   and configure hardware using this MAC address in the initialization.
   The hns3 VF PMD driver get the MAC address form PF driver, if
   obtaining a non-zero MAC address from mailbox, VF driver will
   configure hardware using it, otherwise using a random MAC address in
   the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
   device after the initialization of the related VF device, the PF
   driver will notify VF driver to reset VF device to make the new MAC
   address effective immediately. The hns3 VF PMD driver should check
   whether the MAC address has been changed by the PF kernel netdevice
   driver, if changed VF driver should configure hardware using the new
   MAC address in the recovering hardware configuration stage of the
   reset process.
3) When user has configured a mac address for VF device by "ip link set
   ..." command based on the PF device, the hns3 PF kernel ethdev driver
   does not allow VF driver to request reconfiguring a different default
   mac address and return -EPREM to VF driver through mailbox.

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>

net/hns3: support different numbers of Rx and Tx queues

Hardware does not support individually enable/disable/reset the Tx or Rx
queue in hns3 network engine, driver must enable/disable/reset Tx and Rx
queues at the same time.

Currently, hns3 PMD driver does not support the scenarios as below:
1) When calling the following function, the input parameter nb_rx_q and
   nb_tx_q are not equal.
     rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
                      uint16_t nb_tx_q,
      const struct rte_eth_conf *dev_conf);
2) When calling the following functions to setup queues, the
   cumulatively setup Rx queues are not the same as the setup Tx queues.
     rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,,,);
     rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,,,);
However, these are common usage scenarios in some applications, such as,
l3fwd, ip_ressmbly and OVS-DPDK, etc.

This patch adds support for this usage of these functions by setup fake
Tx or Rx queues to adjust numbers of Tx/Rx queues. But these fake queues
are imperceptible, and can not be used by upper applications.

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/i40e: support flow director for L2TPv3 over IP

Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.

Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

ethdev: add L2TPv3 over IP header to flow API

This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.

Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>

net/af_xdp: use single producer/consumer ring

The ring is used only by af_xdp PMD itself, so no need to support
multi-producer and multi-consumer mode. This patch changes the ring
to single-producer and single-consumer mode, which could yield better
performance for addr enqueue and dequeue.

Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>

app/testpmd: fix GENEVE flow item

Previous patch added support of GENEVE pattern item in flow rule.
Function flow_item_default_mask() was not updated, so using it with
GENEVE item returns null.
Using testpmd command "set raw_decap" or "set raw_encap" with
GENEVE item, without specifying any parameters, results in
segmentation fault.

This patch updates function flow_item_default_mask(),
adding case to handle GENEVE item.

Fixes: 0f4203fe9d18 ("app/testpmd: support GENEVE pattern item in flow rules")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: fix callback unregister with wildcard argument list

The function was checking -1 against the callback data instead of
the given cb_arg parameter.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ricardo Roldan <rroldan@bequant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: fix Tx burst routines set

The tx_burst routine supporting multi-segment packets with
legacy MPW and without inline was missed, and there was no
valid selection for these options, patch adds the missing
routine.

Fixes: 82e75f8323bf ("net/mlx5: fix legacy multi-packet Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

net/ice: use ethernet copy API to do MAC assignment

Use the API rte_ether_addr_copy to do MAC assignment, instead of
calling rte_memcpy function directly.

Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf/base: move to drivers common directory

Change the iavf base code as driver common library, it is used by iavf
PMD now, and it can be used by other Intel SR-IOV PMDs in the future.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: add new link speed constants

This patch fixes 'NIC Link is Up, Unknown bps' message in dmesg
for 2.5Gb/5Gb speeds. This problem is fixed by adding constants
for VIRTCHNL_LINK_SPEED_2_5GB and VIRTCHNL_LINK_SPEED_5GB.

Fixes: a58860f68929 ("net/i40e/base: use new virtchnl header file")

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: enable LED blinking flow

Add X710T*L device specific operations (in port LED detection and
handling of GLGEN_GPIO_CTL.PIN_FUNC field) to enable LED blinking.

Signed-off-by: Damian Milosek <damian.milosek@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add CRC stripping capability

Some VFs may want to disable CRC stripping on incoming packets
so create an offload for that. The VF already sends information
about configuring it's RX queues so use that structure to
indicate that the CRC stripping should be enabled or not.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: introduce firmware EMP reset register

Introduce offsets of firmware registers holding a number of EMP resets.
Implement offsets as a preprocessor's constants.
Required by drivers to read a number of EMP resets reported by FW.

Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: expose LED functionality

The previous code had the LED code wrapped such that, it was
static to the file and not usable outside of it. It is now available.

Signed-off-by: Mateusz Rusinski <mateusz.rusinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add function to read LPI statistics

There was no time duration statistics for LPI (Low Power Idle)
in EEE (Energy-Efficient Ethernet).
Added new procedure to get duration values from FW.
Otherwise there is no available procedure to get tx_lpi_duration
and rx_lpi_duration values.

Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: set PHY access flag on X722

The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.

Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: remove unreachable code

The result of the check is always FALSE and the code within "if"
is never executed.

Signed-off-by: Dzmitry Sautsa <dzmitryx.sautsa@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add flow director constants

Add defines for creating Flow Director flows as defined in datasheet
section 7.1.5.4 for field vectors.

Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix display of FEC settings

Fix display of FEC settings for ethtool.
This patch change variable 'phy.link_info.req_fec_info' sent to ethtool.
Without this patch wrong FEC settings can be shown.

Fixes: 1216fb9f0c8c ("net/i40e/base: store the requested FEC information")

Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: mark additional AQ bits as reserved

Mark bits 0xD through 0xF for the command flags of a cloud filter as
reserved. These bits are not yet defined and are considered as reserved
in the data sheet.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix retrying logic

Fixed a bug where driver was breaking out of the loop and
reporting an error without retrying first.

Fixes: 466eec7d6b1a ("net/i40e/base: retry AQC to overcome IRCRead hangs")

Signed-off-by: Marcin Formela <marcin.formela@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add function to set MAC type

Make i40e_set_mac_type() public. i40e driver requires
i40e_set_mac_type() to be public. It is required for recovery mode
handling. Without this patch recovery mode could not be detected at
probe() function.

Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: support persistent LLDP

This patch adds a function to read NVM module data and uses it to
read current LLDP agent configuration from NVM API version 1.8.

Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: update FW API version

Update FW API version to 1.9.

Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add FWS1B register masks

Function check_recovery_mode had wrong if statement. Now we check proper
FWS1B register values, which are responsible for the recovery mode.
Recovery mode has 6 values in total. That's why we need 6 different
flags.  Now in if statement we recognize type of mac and register value.
Without those changes driver could show wrong state.

Signed-off-by: Adrian Podlawski <adrian.podlawski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add drop mode parameter to set MAC config

This patch adds "drop mode" parameter to set mac config AQ command.
This bit controls the behavior when a no-drop packet is blocking a TC
queue.
0 – The PF driver is notified.
1 – The blocking packet is dropped and then the PF driver is notified.

Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: extend PHY access AQ command

Currently FW use MDIO I/F number corresponded with current PF for PHY
access. This code allow to specify used MDIO I/F number.

Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix Tx descriptors number

The existing driver allows setting the number of TX descriptors
to the value that is indivisible by 32. This is not properly
supported by x710 hardware. The patch limits the number of TX
descriptors to the whole value of 32.

Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Dariusz Chaberski <dariuszx.chaberski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: update status codes

Add a few new status codes and rename a few to make them more
consistent.  Error code are mapped to similar values as in
i40e_status.h, so as to be compatible with older VF drivers not using
this status enum.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: backport style changes from upstream Linux

The upstream virtchnl.h has a few minor style differences to what is
out-of-tree, and there is no real reason we should prefer the current
style over whats upstream.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add function to read LPI counters

This change introduces new function i40e_get_lpi_counters() reading
Low Power Idle (LPI) mode counters from Energy Efficient Ethernet (EEE)
statistics. Since reading EEE statistics requires running DNL script,
function i40e_aq_run_phy_activity() able to run it, was implemented.

i40e_lpi_stat_update() was introduced as helper function for retrieving
LPI counters' values relative to given offsets.

This change also fixes order of fields in struct
i40e_aqc_run_phy_activity and introduces union in the struct
providing more descriptive names of fields depending on usage
(command or response).

Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix missing link modes

Fix for missing "Supported link modes" and "Advertised link modes"
info in ethtool after changed speed on X722 devices with BASE-T PHY
with FW API version >= 1.7.
The same FW API version on X710 and X722 does not mean the same
feature set so the change was needed as mac type of the device
should also be checked instead of FW API version only.

Fixes: e8228f1a16b7 ("net/i40e/base: report supported link modes")

Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: read LPI status from external PHY

When external PHY is used, MAC register may not reflect actual
state of LPI. Add function reading it directly from PHY or MAC,
depending on what is supported by the device.

Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: support Energy Efficient Ethernet

This change adds i40e_enable_eee() function controlling advertisement
of Energy Efficient Ethernet mode (EEE).

Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add function to get FW LLDP agent status

This change introduces i40e_get_fw_lldp_status() function capable of
reporting status of FW Link Layer Discovery Protocol (LLDP) agent.

Since reading LLDP configuration from NVM only gives information what
is the default state of FW LLDP agent after POR, this change introduces
more reliable method for checking if agent is enabled.

Current state of FW LLDP agent may be different if user disabled the
agent, so i40e_get_fw_lldp_status() uses LLDP MIB checking to determine
status of the agent.

Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: improve AQ log granularity

This patch makes it possible to log only AQ descriptors, without the
entire AQ message buffers being dumped too. It should greatly reduce
kernel log size in cases where a full AQ dump is not needed.
Selection is made by setting flags in hw->debug_mask.

Additionally, some debug messages that preceded an AQ dump have been
moved to I40E_DEBUG_AQ_COMMAND class, which seems more appropriate.

Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add flags for PHY types

Adding bit flags to enable/disable EEE capability for 2.5GBase-T and
5GBase-T PHY types as well as 'Set autonomous EEE for relevant enabled
PHY types' flag.

Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Michal Litwicki <michalx.litwicki@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: check MAC type

Some features were introduced in different FW API version on XL710 and
X722 MACs. Others are available only on specific MAC type. Make sure
that they are properly assigned. Also fix the style issues reported by
current check-patch.

Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: add new device IDs

New device ids are created to support SFP+ and backplane connections.

Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: support LLDP agent

This code implements changes necessary for LLDP Agent support.

1. Modified i40e_aq_start_lldp and i40e_aq_stop_lldp. Now Stop and Start
can also be persistent across power cycles.
2. Added new function i40e_aq_restore_lldp which restores factory
setting for LLDP Agent or gets its status.

Signed-off-by: Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix error message

This patch changes an error code for an admin queue head overrun to use
I40E_ERR_ADMIN_QUEUE_FULL instead of I40E_ERR_QUEUE_EMPTY.

Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: decouple MIB change event from DCB init

There is a need to enable MIB change event, not at the same time as
init_dcb. This patch will serve this requirement.

Modify the i40e_init_dcb to return the correct error when LLDP or DCBX
is not in operational state.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: fix buffer address

The high 32-bits were being set incorrectly in the 'Set Local LLDP MIB'
AQ command (0x0A08). Change it to use the right macro to get the correct
bits.

Fixes: 1fa6324ad30b ("i40e/base: add new interfaces")
Cc: stable@dpdk.org
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: increase max VSI count for VFs

For historical reasons, we allowed 3 VSIs per VF, but never used more
than one. Now with ADq, we can use up to 4 VSIs per VF, so change this
value to match.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e/base: support NVM feature flags

Extend NVM Update API to support reporting of features
available for the tools.

This change is needed by NVM Update to determine if driver
supports changing NVM layout from structured to flat.

Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/octeontx2: fix getting supported packet types

Setting up supported ptypes using testpmd command is failing
because supported_ptypes_get callback will never return ptypes
supported, as NIX_RX_OFFLOAD_PTYPE_F bit in rx_offload_flags
is zero by default in testpmd.

Fixes: d2706e15e6fb ("net/octeontx2: support reduced set of packet types")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/qede: remove local bool type

Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.

(Not sure if the previous code is checking for true/false condition.
Recommend careful review on this patch.)

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/fm10k: remove local bool type

Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>