doc: fix a typo in flow API guide

flow_type_rss_offloads was misspelt as flow_tpe_rss_offloads

Fixes: 6abee736abe6 ("doc: update RSS flow action with best effort")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

ethdev: move non-offload capabilities

The definitions of RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP
and RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP were inserted
before the last comment of Tx offloads.

It is moved in a better place,
with comments moved to be before the definition.
A group comment is added to better describe device capabilities.

Fixes: cac923cfea47 ("ethdev: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

net/ice: fix Rx offload flags in SSE path

Update reading offload flags of last two of four packets.

Fixes: ece1f8a8f1c8 ("net/ice: switch to flexible descriptor in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix flow director for eth + VLAN pattern

Currently, can't create more than one following flow for
ETH + VLAN pattern.

1. flow create 0 ingress pattern eth / vlan vid is 350 / end
   actions queue index 2 / end
2. flow create 0 ingress pattern eth / vlan vid is 351 / end
   actions queue index 3 / end

The root cause is the vlan_tci is not set correctly, it will
cause the keys of both of the two flows are the same.

Fixes: 42044b69c67d ("net/i40e: support input set selection for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/txgbe: add Tx done cleanup

Add support for API rte_eth_tx_done_cleanup().

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx descriptor status

Supports check the status of Rx and Tx descriptors.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: add Rx buffer split limitation to mlx5 guide

The buffer split feature is mentioned in the mlx5 PMD
documentation, the limitation is description is added
as well.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: report Rx buffer split capabilities

Add rte_eth_dev_info->rx_seg_capa parameters:
  - receiving to multiple pools is supported
  - buffer offsets are supported
  - no offset alignment requirement
  - reports the maximal number of segments
  - reports the buffer split offload flag

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: support Rx buffer split on datapath

Only the regular rx_burst routine is updated to support split,
because the vectorized ones does not support scatter and MPRQ
does not support split at all.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: register multiple pool for Rx queue

The split feature for receiving packets was added to the mlx5
PMD, now Rx queue can receive the data to the buffers belonging
to the different pools and the memory of all the involved pool
must be registered for DMA operations in order to allow hardware
to store the data.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: configure Rx queue for buffer split

The scatter-gather elements should be configured
accordingly to support the buffer split feature.
The application provides the desired settings for
the segments at the beginning of the packets and
PMD pads the buffer chain (if needed) with attributes
of last specified segment to accommodate the packet
of maximal length.

There are some limitations are implied. The MPRQ
feature should be disengaged if split is requested,
due to MPRQ neither supports pushing data to the
dedicated pools nor follows the flexible buffer sizes.
The vectorized rx_burst routines does not support
the scattering (these ones are extremely simplified
and work over the single segment only) and can't
handle split as well.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: support Rx buffer split description

The routine to provide Rx queue setup with specifying
extended receiving buffer description is added.
It allows application to specify desired segment
lengths, data position offsets in the buffer
and dedicated memory pool for each segment.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: implement tunnel offload

Tunnel Offload API provides hardware independent, unified model
to offload tunneled traffic. Key model elements are:
 - apply matches to both outer and inner packet headers
   during entire offload procedure;
 - restore outer header of partially offloaded packet;
 - model is implemented as a set of helper functions.

Implementation details:
* tunnel_offload PMD parameter must be set to 1 to enable the feature.
* application cannot use MARK and META flow actions with tunnel.
* offload JUMP action is restricted to steering tunnel rule only.

Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: support shared action for RSS

Implement shared action create/destroy/update/query. The current
implementation support is limited to shared RSS action only. The shared
RSS action create operation prepares hash RX queue objects for all
supported permutations of the hash.  The shared RSS action update
operation relies on functionality to modify hash RX queue introduced in
one of the previous commits in this patch series.

Implement RSS shared action and handle shared RSS on flow apply and
release. The lookup for hash RX queue object for RSS action is limited
to the set of objects stored in the shared action itself and when
handling shared RSS action. The lookup for hash RX queue object inside
shared action is performed by hash only.

Current implementation limited to DV flow driver operations i.e. verbs
flow driver operations doesn't support shared action.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: translate shared action for RSS action

Handle shared action on flow validation/creation/destruction.
mlx5 PMD translates shared action into a regular one before handling
flow validation/creation. The shared action translation applied to
utilize the same execution path for both shared and regular actions.
The current implementation supports shared action translation for shared
RSS action only.

RSS action validation split to validate shared RSS action on its
creation in addition to action validation in flow validation/creation
path.

Implement rte_flow shared action API for mlx5 PMD, mostly forwarding
calls to flow driver operations (see struct mlx5_flow_driver_ops).

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/mlx5: modify hash Rx queue objects

Implement modification for hashed table of Rx queue object (see
mlx5_hrxq_modify()). This implementation relies on the capability to
modify TIR object via DevX API, i.e. current implementation doesn't
support verbs HW object operations. The functionality to modify hashed
table of Rx queue object is prerequisite to implement
rete_flow_shared_action_update() for shared RSS action in mlx5 PMD.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

common/mlx5: modify advanced Rx object via DevX

Implement TIR modification (see mlx5_devx_cmd_modify_tir()) using DevX
API. TIR is the object containing the hashed table of Rx queue. The
functionality to configure/modify this HW-related object is prerequisite
to implement rete_flow_shared_action_update() for shared RSS action in
mlx5 PMD. HW-related structures for TIR modification add in mlx5_prm.h.

Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

net/bnxt: update PMD supported features

Mark "BSD nic_uio", "Usage doc", and "Perf doc" as supported
for the bnxt PMD.

Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: use shorter SIMD initializers

Make SIMD initialization code less verbose by using appropriate
intrinsics when all lanes of a vector are initialized to the
same value.

Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix boolean operator usage

Use boolean AND operator instead of bitwise operator.

Coverity issue: 323488
Fixes: b42c15c83e88 ("net/bnxt: support trusted VF")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/ice: update writeback policy to reduce latency

Just like iavf, setting the value to 2us allows for generally good
streaming packet performance while keeping latency down, and
generally keeps the performance of the PF and VF interfaces similar.

The previous value of 0x10 was making latency on a single packet
receive be as much as 16us.

Fixes: 65dfc889d86b ("net/ice: support Rx queue interruption")
Cc: stable@dpdk.org
Reported-by: Brian Johnson <brian.johnson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: fix performance with writeback policy

The iavf driver was trying to use writeback on ITR, but was
never setting an ITR, so it didn't work. This caused performance
to be limited due to too much PCIe traffic and partial writes
during most benchmarking workloads.
Set the ITR during queue setup, which can be checked at runtime
by reading register 0x2800. Setting the value to 2us allows
for generally good streaming packet performance while keeping
latency down.

Fixes: d6bde6b5eae9 ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Reported-by: Brian Johnson <brian.johnson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

raw/ifpga/base: enhance driver reliability in multi-process

Current hardware protection is based on pthread mutex which
work just for situation of multi-thread in one process. In
multi-process environment, hardware state machine would be
corrupted by concurrent access, that means original pthread
mutex mechanism need be enhanced.

The major modifications in this patch are list below:
1. Create a mutex for adapter in shared memory named
   "mutex.IFPGA:domain:bus:dev.func" when device is probed.
2. Create a shared memory named "IFPGA:domain:bus:dev.func" during opae
   adapter is initializing. There is a reference count in shared memory.
   Shared memory will be destroyed once reference count turned to zero.
3. Two mutexs are created in shared memory and initialized with flag
   PTHREAD_PROCESS_SHARED. One for SPI and the other for I2C. They will
   be passed to SPI and I2C driver subsequently.
4. DTB data in flash will be cached in shared memory. Then MAX10 driver
   can read DTB from shared memory instead of flash. This avoid
   confliction of concurrent flash access between hardware and software.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: free resources when destroying device

Add two functions to complete the resource free work, one is
'ifpga_adapter_destroy()', the other is 'ifpga_bus_uinit()'.

Then call 'opae_adapter_destroy()' and 'opae_adapter_data_free()'
in 'ifpga_rawdev_close()' to free resources.

Also 'opae_adapter_free()' is removed from 'ifpga_rawdev_destroy()',
because opae adapter is pointed by dev_private member in raw_dev,
it will be freed in 'rte_rawdev_pmd_release()'.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: fix return of IRQ unregister

Since 'rte_intr_callback_unregister()' can return positive
value as success, but 'ifpga_rawdev_destroy()' handle it as
an error.

Instead, only negative return is treated as failure.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: handle unsupported interrupt type

Handle unsupported interrupt type requests properly,
on unsupported interrupt case:
'ifpga_unregister_msix_irq()' returns success,
'ifpga_register_msix_irq()' return failure.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

raw/ifpga/base: fix interrupt handler instance usage

Interrupt handler copied to the local 'intr_handle' variable by value
before passing it to IRQ functions.
This leads IRQ functions update the local variable instead of
'ifpga_irq_handle'.

Instead, using 'intr_handle' local variable as pointer to
'ifpga_irq_handle' as intended.

Fixes: e0a1aafe2af9 ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

net/txgbe: support DCB info get

Add DCB information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support PTP

Add PTP support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device LED on and off

Support device LED on and off.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support register dump

Add register dump support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support EEPROM info get

Add EEPROM information get related operations.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support getting FW version

Add firmware version get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support MTU set

Add MTU set operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add device promiscuous and allmulticast mode

Add device promiscuous and allmulticast mode.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support priority flow control

Add priority flow control support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support FC auto negotiation

Add flow control negotiation with link partner.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support flow control

Add flow control support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support DCB

Add DCB transmit and receive mode configurations,
and allocate DCB packet buffer.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support RSS

Add RSS configure, support to RSS hash and reta operations for PF.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add VMDq configure

Add multiple queue setting with VMDq.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PF module configure for SRIOV

Add PF module configure for SRIOV.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add process mailbox operation

Add check operation for vf function level reset,
mailbox messages and ack from vf.
Waiting to process the messages.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PF module init and uninit for SRIOV

Add PF module init and uninit operations with mailbox.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add SWFW semaphore and lock

Add semaphore between software and firmware.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support VLAN

Add VLAN filter, tpid, offload and strip set support.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add queue stats mapping

Add queue stats mapping set, and clear hardware counters.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device xstats

Add device extended stats get from reading hardware registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device statistics

Add device stats get from reading hardware registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx queue info get

Add Rx and Tx queue information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Rx interrupt

Support rx queue interrupt.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device stop and close

Add device stop, close and reset operations.
And support hardware thermal sensor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx data path start and stop

Add receive and transmit data path start and stop.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support device start

Add device start operation with hardware start and reset.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Rx

Fill receive functions and define receive descriptor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Tx prepare

Fill transmit prepare function.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support Tx with hardware offload

Fill transmit function with hardware offload.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support simple Tx

Fill simple transmit function and define transmit descriptor.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support packet type

Add packet type marco definition and convert ptype to ptid.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx start and stop

Add receive and transmit units start and stop for specified queue.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx queues setup and release

Add receive and transmit queues setup and release.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add Rx and Tx init

Add receive and transmit initialize unit.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add unicast hash bitmap

Add unicast hash bitmap.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add MAC address operations

Add MAC address related operations.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add autoneg control read and write

Add autoc read and write for kr/kx/kx4/sfi link.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add multi-speed link setup

Add multispeed fiber setup link and laser control.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add link status change

Add ethdev link interrupt handler, MAC setup link
and check link status and get capabilities.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add device configuration

Add device configure operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add interrupt operation

Add device interrupt handler and setup misx interrupt.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support getting device info

Add device information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PHY reset

Add phy reset function, support read and write phy registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add module identify

Add sfp anf qsfp module identify, i2c start and stop.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add PHY init

Add phy init functions, get phy type and identify.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add HW init and reset operation

Add hardware init function and reset operation in mac layer.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add EEPROM functions

Add EEPROM functions.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add HW infrastructure and dummy function

Add hardware infrastructure and dummy function.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add MAC type and bus LAN id

Add base driver shared code.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add error types and registers

Add error types and registers.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add device init and uninit

Add basic init and uninit function,
and some macro definitions prepare for hardware infrastructure.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: support probe and remove

Add basic PCIe ethdev probe and remove.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/txgbe: add build and doc infrastructure

Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for txgbe PMD.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: fix RSS key for flow API RSS rule

When a flow API RSS rule is issued in testpmd, device RSS key is changed
unexpectedly, device RSS key is changed to the testpmd default RSS key.

Consider the following usage with testpmd:
1. first, startup testpmd:
 testpmd> show port 0 rss-hash key
 RSS functions: all ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 RSS key: 6D5A56DA255B0EC24167253D43A38FB0D0CA2BCBAE7B30B477CB2DA38030F
          20C6A42B73BBEAC01FA
2. create a rss rule
 testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end \
          actions rss types ipv4-udp end queues end / end

3. show rss-hash key
 testpmd> show port 0 rss-hash key
 RSS functions: all ipv4-udp udp
 RSS key: 74657374706D6427732064656661756C74205253532068617368206B65792
          C206F76657272696465

This is because testpmd always sends a key with the RSS rule,
if user provides a key as part of the rule that key is used, if user
doesn't provide a key, testpmd default key is sent to the PMDs, which is
causing device programmed RSS key to be changed.

There was a previous attempt to fix the same issue [1], but it has been
reverted back [2] because of the crash when 'key_len' is provided
without 'key'.

This patch follows the same approach with the initial fix [1] but also
addresses the crash.

After change, testpmd RSS key is 'NULL' by default, if user provides a
key as part of rule it is used, if not no key is sent to the PMDs at all

[1]
Commit a4391f8bae85 ("app/testpmd: set default RSS key as null")

[2]
Commit f3698c3d09a6 ("app/testpmd: revert setting default RSS")

Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/netvsc: allocate contiguous physical memory for RNDIS

When sending data, netvsc assumes the tx_rndis buffer is contiguous and
calculates physical addresses based on this assumption.

Use memzone to allocate tx_rndis so it's guaranteed that this buffer is
physically contiguous.

Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>

net/mvpp2: fix memory leak in error path

In mrvl_create() allocated memory for 'mtr', we don't free it
when profile get fails and it will lead to memory leak.

We can get profile at the beginning of the function to
fix it, before calling mtr = rte_zmalloc_socket().

Fixes: cdb53f8da628 ("net/mvpp2: support metering")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Liron Himi <lironh@marvell.com>

net/ena: remove unused macro

This assert macro is not called anymore.
This also fixes an invalid reference to RTE_LOGTYPE_ERR that does not
exist.

Fixes: 3adcba9a8987 ("net/ena: update HAL to the newer version")
Fixes: 6f1c9df9e9cc ("net/ena: use dynamic log type for debug logging")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>

examples/vhost: support vhost async data path

This patch is to implement vhost DMA operation callbacks for CBDMA
PMD and add vhost async data-path in vhost sample. With providing
callback implementation for CBDMA, vswitch can leverage IOAT to
accelerate vhost async data-path.

Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

examples/vhost: add async vhost args parsing

This patch is to add async vhost driver arguments parsing function
for CBDMA channel, DMA initiation function and args description.
The meson build file is changed to fix dependency problem. With
these arguments vhost device can be set to use CBDMA or CPU for
enqueue operation and bind vhost device with specific CBDMA channel
to accelerate data copy.

Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: remove fallback in async enqueue API

By design, async enqueue API should return directly if async device
is not registered. This patch removes the corrupted implementation of
the enqueue fallback from async mode to sync mode.

Fixes: cd6760da1076 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: check virtqueue metadata pointer

This patch checks whether the virtqueue metadata pointer
is valid before dereferencing it. It is not considered
a fix as earlier patch ensures there are no holes in the
array of virtqueue metadata pointers.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: validate index in async API

This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.

Fixes: 9eed6bfd2efb ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: validate index in inflight API

This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.

Fixes: 4d891f77ddfa ("vhost: add APIs to get inflight ring")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: validate index in live-migration API

This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.

Fixes: bd2e0c3fe5ac ("vhost: add APIs for live migration")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: validate index in guest notification API

This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.

Fixes: 9eed6bfd2efb ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: validate index in available entries API

This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.

Fixes: a67f286a6596 ("vhost: export queue free entries")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

vhost: fix virtqueues metadata allocation

The Vhost-user backend implementation assumes there will be
no holes in the device's array of virtqueues metadata
pointers.

It can happen though, and would cause segmentation faults,
memory leaks or undefined behaviour.

This patch keep the assumption that there is no holes in this
array, and allocate all uninitialized virtqueues metadata up
to requested index.

Fixes: 160cbc815b41 ("vhost: remove a hack on queue allocation")
Cc: stable@dpdk.org
Suggested-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>

net/vhost: fix xstats after clearing stats

The PMD API allows stats and xstats values to be cleared separately.
This is a problem for the vhost PMD since some of the xstats values are
derived from existing stats values.  For example:

testpmd> show port xstats all
...
tx_unicast_packets: 17562959
...
testpmd> clear port stats all
...
show port xstats all
...
tx_unicast_packets: 18446744073709551615
...

Modify the driver so that stats and xstats values are stored, updated,
and cleared separately.

Fixes: 4d6cf2ac93dc ("net/vhost: add extended statistics")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/iavf: fix vector Rx

The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.

Bugzilla ID: 516
Fixes: 319c421f3890 ("net/avf: enable SSE Rx Tx")
Fixes: 1162f5a0ef31 ("net/iavf: support flexible Rx descriptor in SSE path")
Fixes: 5b6e8859081d ("net/iavf: support flexible Rx descriptor in AVX path")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/fm10k: fix vector Rx

The scattered receive path should use a wrapper function to achieve the
goal of burst maximizing.

Bugzilla ID: 516
Fixes: fe65e1e1ce61 ("fm10k: add vector scatter Rx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix vector Rx

The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.

Bugzilla ID: 516
Fixes: c68a52b8b38c ("net/ice: support vector SSE in Rx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix vector Rx

The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.

Bugzilla ID: 516
Fixes: 5b463eda8d26 ("net/i40e: make vector driver filenames consistent")
Fixes: ae0eb310f253 ("net/i40e: implement vector PMD for ARM")
Fixes: c3def6a8724c ("net/i40e: implement vector PMD for altivec")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>