net/bnxt: require async completion ring for vector path

Disable support for vector mode when async completions can be placed
in a receive completion ring and change the default for all platforms
to use a dedicated async completion ring.

Simplify completion handling in vector mode receive paths now that
it no longer needs to handle async completions.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use appropriate type for Rx ring

Change the type of the software receive mbuf ring from an array
of structures containing an mbuf pointer to an array of pointers
to struct rte_mbuf for consistency with how this ring is currently
used by the vector mode receive function.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix getting burst mode for Arm

Transmit and receive burst mode get operations incorrectly return
"Vector SSE" on ARM64 platforms, change to return "Vector Neon"
instead.

Fixes: 398358341419 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix freeing mbuf

We should use rte_pktmbuf_free() instead of rte_free() to free the mbuf.

Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove logically dead code

This patch removes logically dead code reported by coverity.

Coverity issue: 360824
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/iavf: fix command after PF reset

If PF reset is finished but VF reset is pending, VF should no need to
send any invalid cmd to PF. That would avoid mass unexpected behaviors
affecting the robust.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Fixes: 9e03acd726cf ("net/iavf: fix flow access")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

common/iavf: add IPv6 prefix protocol header fields

Some IPv6 prefix related protocol header fields are defined in this
patch, so that we can use prefix instead of full IPv6 address for RSS.
Ref https://tools.ietf.org/html/rfc6052.

Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: support GTPC

Add GTPC header and its field selector.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: save max MTU received from PF

Most values from the VIRTCHNL_OP_GET_VF_RESOURCES are stored in the
iavf_hw_capabilities structure. Unfortunately, it seems that
max_mtu was missed. Add this member to the structure and save it when
parsing hw config.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: cleanup virtual channel code

1. use BIT to replace <<
2. move VIRTCHNL_VF_CAP_DCF to keep order
3. align the vc msg validate

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: use pad byte to specify MAC type

Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.

Below are the values that should be used by all VF drivers going
forward.

VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
  drivers that don't support the new type bits). The PF drivers
  will track VF's device/primary unicast MAC using with best
  effort.

VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
  device/primary unicast MAC. It should be used for both delete
  and add cases related to the device/primary unicast MAC.

VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
  MAC addresses that are not the device/primary unicast MAC. For
  example, extra unicast addresses and multicast addresses
  assuming the PF supports "extra" addresses at all.

If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/ice: fix firmware version output

Kernel driver shows firmware version as hex but ice PMD shows
as decimal. This patch fixes the issue to make consistent with
kernel driver.

Fixes: f9204d8a23c3 ("net/ice: fix firmware version result of ethtool")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/netvsc: replace compiler builtin overflow check

'__builtin_add_overflow' added to gcc in version 5, earlier versions
causing build error, like gcc 4.8.5 in RHEL7.

Replaced compiler builtin check with arithmetic check.

Fixes: 7838d3a6ae7a ("net/netvsc: check for overflow on packet info from host")

Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Tested-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

app/testpmd: count empty polls in 5-tuple swap engine

Enable empty polls in burst stats within 5tswap.c

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: enable burst stats for noisy VNF mode

Add burst stats for noisy VNF mode.

Fixes: 3c156061b938 ("app/testpmd: add noisy neighbour forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-burst-stats runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-core-cycles runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: remove underscore prefix from internal API

'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.

For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: use hairpin helper functions

Hairpin helper functions were not used by drivers, but it was used only
local to ethdev. They are:
'rte_eth_dev_is_rx_hairpin_queue()'
'rte_eth_dev_is_tx_hairpin_queue()'

Exposing them as internal APIs and update mlx5 driver (only user of
hairpin) to use them.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: mark internal functions

Some ethdev functions are for drivers only, not for applications.

Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.

Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: make device operations struct private

Hiding the 'struct eth_dev_ops' from applications.

Removing relevant deprecation notice.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: move inline device operations

This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.

Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.

Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.

To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.

The list of dev_ops moved:
eth_rx_queue_count_t       rx_queue_count;
eth_rx_descriptor_done_t   rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: deprecate descriptor status check API

Marking 'rte_eth_rx_descriptor_done()' API as deprecated.
``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.

Plan is to remove the API on 21.11 release.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: remove redundant license text

Redundant BSD-3 license text removed, the licensing already documented
by "SPDX-License-Identifier: BSD-3-Clause" SPDX tag.

Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: mark all traffic manager API as experimental

This patch marks all traffic manager API as experimental as
per deprecation notice[1] and discussion[2] mentioned in following
threads.

[1] https://mails.dpdk.org/archives/dev/2020-May/166221.html
[2] https://mails.dpdk.org/archives/dev/2020-April/165364.html

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: share Rx queue drop action code

Move Rx queue drop action similar resources allocations from Verbs
module to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue drop

Separate Rx queue drop creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx hash queue code

Move Rx hash queue object similar resources allocations from DevX and
Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue indirection table code

Move Rx indirection table object similar resources allocations from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: remove indirection table type field

Once the separation between Verbs and DevX is done using function
pointers, the type field of the indirection table structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx hash queue creation

Separate Rx hash queue creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx indirection table object creation

Separate Rx indirection table object creation into both Verbs and DevX
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue object modification

Use new modify_wq functions for Rx object creation in DevX and Verbs
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue object modification

Separate Rx object modification to the Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of WQ and CQ object

Rearrangement of WQ and CQ creation for Verbs Rx queue:
1. Rename the allocation function.
2. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of RQ and CQ resources

Rearrangement of RQ and CQ resource handling for DevX Rx queue:
1. Rename the allocation function so that it is understood that it
allocates all resources and not just the CQ or RQ.
2. Move the allocation and release of the doorbell into creation and
release functions.
3. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx control code

Move Rx object similar resources allocations and debug logs from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx interrupt handling

Separate interrupt event handler into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue object creations

As an arrangement to Windows OS support, the Verbs operations should be
separated to another file.
By this way, the build can easily cut the unsupported Verbs APIs from
the compilation process.

Define operation structure and DevX module in addition to the existing
linux Verbs module.
Separate Rx object creation into the Verbs/DevX modules and update the
operation structure according to the OS support and the user
configuration.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: mitigate Rx queue reference counters

The Rx queue structures manage 2 different reference counter per queue:
rxq_ctrl reference counter and rxq_obj reference counter.

There is no real need to use two different counters, it just complicates
the release functions.
Remove the rxq_obj counter and use only the rxq_ctrl counter.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix types differentiation in Rx queue create

Rx HW objects can be created by both Verbs and DevX operations.
The management of the 2 types of operations are done directly in the
main flow of the object’s creations.

Some arrangements and validations were wrongly done to the irrelevant
type:

1. LRO related validations were done for Verbs type where LRO is not
supported at all.
2. Verbs allocation arrangements were done for DevX operations where it
is not needed.
3. Doorbell destroy was considered for Verbs types where it is
irrelevant.

Adjust the aforementioned points only for the relevant types.

Fixes: e79c9be91515 ("net/mlx5: support Rx hairpin queues")
Fixes: 08d1838f645a ("net/mlx5: implement CQ for Rx using DevX API")
Fixes: 17ed314c6c0b ("net/mlx5: allow LRO per Rx queue")
Fixes: dc9ceff73c99 ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix Rx queue state update

In order to support DevX Rx queue stop and start operations, the state
of the queue should be updated in FW.
The state update PRM command requires to set both the current state and
the new requested state.

The current state and the new requested state fields setting were
wrongly switched.

Switch them back to the correct setting.

Fixes: 161d103b231c ("net/mlx5: add queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix Rx hash queue creation error flow

The mlx5_hrxq_new function allocates several resources and if one of the
allocations fails, the function jumps to an error label where it
releases all the allocated resources.

When the TIR action creation fails, the hrxq memory is not released what
can cause a resource leak.

Add an appropriate release to the hrxq pointer in the error flow.

Fixes: 772dc0eb83d3 ("net/mlx5: convert hrxq to indexed")
Fixes: dc9ceff73c99 ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/ark: remove Tx padding configuration macro

Replace behavior with RTE_LIBRTE_ARK_MIN_TX_PKTLEN
with a default value of 0.
Update documentation as needed.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ark: replace compile time log config with runtime

Use ARK_PMD_LOG in place of PMD_DRV_LOG, PMD_DEBUG_LOG, PMD_FUNC_LOG,
PMD_STATS_LOG, PMD_RX_LOG, and PMD_TX_LOG.
Review and adjust log levels and messages as needed.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ice: fix flow validation for unsupported patterns

When loading the OS default package and the pipeline mode is enabled
by the "pipeline-mode-support=1" operation. In this case, the wrong
parser is selected for processing and it will cause the unsupported
patterns(pppoes/pfcp/l2tpv3/esp/ah) to be validated successfully.
This patch corrects the parser selection issue.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: refactor RSS

Current RSS implementation is not easy to scale and maintain.
The patch refactor the code base on below design:

1. iavf_pattern_match_item->input_set_mask is the superset of
   ETH_RSS_xxx.
2. iavf_pattern_match_item->meta is the virtchnl_proto_hdrs template.
3. iavf_hash_parse_pattern will generate pattern hint.
4. iavf_hash_parse_action will refine the virtchnl_proto_hdrs base on
   pattern hint and ETH_RSS_xxx.
5. The refine process include
   1) refine field selector of l2, l3, l4.
   2) insert gtpu proto_hdr at the beginning base on pattern hint.
   3) refine field selector for gtpu header.

The patch reduce the code from 4000+ line to less than 1000.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/ice/base: fix outer IPv6 packet type table

ptype 264, 265, 266, 267, 275 should not be set
in ice_ptypes_ipv6_ofos_all.

Fixes: 88824213be8a ("net/ice/base: enable RSS for PFCP/L2TP/ESP/AH")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/dpaa: support configuring RSS on runtime

With fmlib (FMCLESS) mode now RSS can be modified on runtime.
This patch add support for RSS update functions

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa: support FMC parser for VSP

FMC tool generates and saves the setup in a file.
This patch help Parse the /tmp/fmc.bin generated by FMC to
setup RXQs for each port on FMC mode.
The parser gets the fqids and vspids from fmc.bin

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support virtual storage profile

This patch adds support for Virtual Storage profile (VSP) feature.
With VSP support when memory pool is created, the hw buffer pool id
i.e. bpid is not allocated; the bpid is identified by dpaa flow
create API.
The memory pool of RX queue is attached to specific BMan pool
according to the VSP ID when RX queue is setup.
For fmlib based hash queue, VSP base ID is assigned to each queue.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: add virtual storage profile port init

This patch add support to initialize the VSP ports
in the FMAN library.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: support shared MAC

A shared MAC interface is an interface which can be used
by both kernel and userspace based on classification configuration
It is defined in dts with the compatible string
"fsl,dpa-ethernet-shared" which bpool will be seeded by the dpdk
partition and configured as a netdev by the dpaa Linux eth driver.
User space buffers from the bpool will be kmapped by the kernel.

Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support FMCless mode

This patch uses fmlib to configure the FMAN HW for flow
and distribution configuration, thus avoiding the need
for static FMC tool execution optionally.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support VSP in fmlib

This patch adds support for VSP (Virtual Storage Profile)
in fmlib routines.
VSP allow a network interface to be divided into physical
and virtual instance(s).
The concept is very similar to SRIOV.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support fmlib

DPAA platorm MAC interface is known as FMAN i.e. Frame Manager.
There are two ways to control it.
1. Statically configure the queues and classification rules before the
start of the application using FMC tool.
2. Dynamically configure it within application by making API calls of
fmlib.

The fmlib or Frame Manager library provides an API on top of the
Frame Manager driver ioctl calls, that provides a user space application
with a simple way to configure driver parameters and PCD
(parse - classify - distribute) rules.

This patch integrates the base fmlib so that various queue config, RSS
and classification related features can be supported on DPAA platform.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/hns3: fix out of bounds access

This patch fixes (out-of-bounds access) coverity issue.

Coverity issue: 349932
Fixes: 7d7f9f80bbfb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/iavf: downgrade error log

When receiving the unsupported AQ messages, it's taken as an
error. It's not appropriate and triggers too much unnecessary print.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/iavf: fix setting of MAC address

When setting the MAC address, the ethdev layer copies the new mac
address in dev->data->mac_addrs[0] before calling the dev_ops.

Therefore, is_same_ether_addr(mac_addr, dev->data->mac_addrs) was
always true, and the MAC was never set. Remove this test to fix the
issue.

Fixes: 538da7a1cad2 ("net: add rte prefix to ether functions")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/iavf: fix port start during configuration restore

If configuring VF promiscuous mode is not supported,
return -ENOTSUP error code in .promiscuous_enable/disable dev_ops.
This is to fix the port start during configuration restore,
where if .promiscuous_enable/disable dev_ops exists
and return any value other than -ENOTSUP, start will fail.

Same is done for .allmulticast_enable/disable dev_ops.

Fixes: ca041cd44fcc ("ethdev: change allmulticast callbacks to return status")
Fixes: 9039c8125730 ("ethdev: change promiscuous callbacks to return status")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/iavf: fix scattered Rx enabling

No need to add additional vlan tag size for max packet size,
the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size in iavf.

Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e: fix link status

If the PF driver supports the new speed reporting capabilities
then use link_event_adv instead of link_event to get the speed.

Fixes: 2a73125b7041 ("i40evf: fix link info update")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Jiaqi Min <jiaqix.min@intel.com>

net/ice: return unknown speed in status

rte_ethdev has declared new NUM_UNKNOWN speed which
could be used in case when no speed information is available and
link is up. NUM_NONE should be returned, if link is down.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/i40e: return unknown speed in status

rte_ethdev has declared new NUM_UNKNOWN speed which
could be used in case when no speed information is available and
link is up. NUM_NONE should be returned, if link is down.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/ixgbe: return unknown speed in status

rte_ethdev has declared new NUM_UNKNOWN speed which
could be used in case when no speed information is available

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

ethdev: allow unknown link speed

When querying the link information, the link status is
a mandatory major information.
Other boolean values are supposed to be accurate:
- duplex mode (half/full)
- negotiation (auto/fixed)

This API update is making explicit that the link speed information
is optional.
The value ETH_SPEED_NUM_NONE (0) was already part of the API.
The value ETH_SPEED_NUM_UNKNOWN (infinite) is added to cover
two different cases:
- speed is not known by the driver
- device is virtual

Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Suggested-by: Benoit Ganne <bganne@cisco.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/hns3: fix some incomplete command structures

The descriptor of the command between firmware and driver consists of
8-byte header and 24-byte data field. The contents sent to firmware are
packaged into a command structure as the data field of command
descriptor.

There are some command structures in hns3_dcb.h file that are less than
24 byte. So this patch fixes these incomplete command structures.

Fixes: 62e3ccc2b94c ("net/hns3: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix default MAC address from firmware

Currently, default MAC address obtained from firmware in PF driver is
directly used by .mac_addr_set ops implementation function when the
rte_eth_dev_start API function is executed. At this moment, if the
default MAC addr isn't an unicast address, it will fail to set default
MAC addr to hardware.

So this patch adds the validity check of default MAC addr in PF driver.
We will use a random unicast address, if the default MAC address
obtained from firmware is not a valid unicast address.

In addition, this patch also adjusts the location of processing default
MAC addr in VF driver so as to increase relevance and readability of the
code.

Fixes: eab21776717e ("net/hns3: support setting VF MAC address by PF driver")
Fixes: d51867db65c1 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>

net/hns3: replace max private macro

This patch uses RTE_MAX function in DPDK lib to replace the private
macro named max_t in driver.

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: support maximum 256 flow director counter

The FDIR counter was used to count the number of FDIR hit, the maximum
number of the counter is 128 based on kunpeng 920, and it was 256 based
on kunpeng 930.

The firmware is responsible to allocate counters for different PF
devices, so the available counter number of one PF may be bigger than
128.

Currently, there are two places using the counter in driver:
1. Configure the counter. Driver uses the command whose opcode is
   HNS3_OPC_FD_AD_OP, now we extend one bit to hold the high bit of
   counter-id in the command format.
2. Query the statistic information of the counter. Driver uses the
   command whose opcode is HNS3_OPC_FD_COUNTER_OP, now the command
   already support 16-bit counter-id.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: add more hardware error types

The new firmware adds the hardware error types reported by MSI-x mode.

These errors are defined as RAS errors in hardware and belong to a
different type from the MSI-x errors processed by the driver.

When hardware detects an error which must be handled by the driver for
device to run properly it reports the error information through the
MSI-x interrupt. After receiving the interrupt reported by the hardware,
the driver queries the error information and identifies the error level,
then rectifies the error. All errors will be logged.
In addition, the hardware may be reset at the function or global level
based on the error level. After the reset is complete, the hardware will
recover to the normal status.

Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: add Tx short frame padding compatibility

There are difference about padding ultra-short frame in Tx procession
for different versions of hardware network engine.

If packet length is less than minimum packet length supported by
hardware in Tx direction, driver need to pad it to avoid error. The
minimum packet length in Tx direction is 33 based on kunpeng 920, and 9
based on kunpeng 930.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>

net/hns3: add Rx interrupts compatibility

There are difference about queue's interrupt configurations for
different versions of hardware network engine, such as queue's interrupt
mapping mode, coalesce configuration, etc.

The following uses the configuration differences of the interrupt
mapping mode as an example.
1) For some versions of hardware network engine, such as kunpeng 920,
   because of the hardware constraint, we need implement unmmapping
   relationship configurations by binding all queues to the last
   interrupt vector and reserving the last interrupt vector. This
   results in a decrease of the maximum queues when upper applications
   call the rte_eth_dev_configure API function to enable Rx interrupt.
2) And for another versions, such as kunpeng 930, hns3 PMD driver can
   map/unmmap all interrupt vectors with queues when Rx interrupt is
   enabled.

This patch resolves configuration differences about Rx interrupts based
on kunpeng 920 and kunpeng 930.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: get device specifications from firmware

This patch adds getting PF/VF device specifications from firmware.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>

net/hns3: get device capability from firmware

This patch adds getting device capabilities from firmware, so driver can
supply different capabilities and specifications to upper level
applications base on different versions of hardware network engine.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

bus/dpaa: remove logically dead code

This patch removes logically dead code reported by coverity.

Coverity issue: 349930
Fixes: b9c94167904f ("bus/dpaa: decouple FQ portal alloc and init")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/iavf: fix mismatch command

The "command mismatch" warning shouldn't be triggered by
VIRTCHNL_OP_EVENT opcode, because the VIRTCHNL_OP_EVENT
opcode is used by PF notifies status change events to VF.
This patch fixed the issue.

Fixes: 837c2ed86e4c ("net/iavf: return error if opcode is mismatched")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>

net/i40e: support link status event in VF

When PF event VIRTCHNL_EVENT_LINK_CHANGE received, i40evf need update
the link status and issue RTE_ETH_EVENT_INTR_LSC via rte ether device
callback function.

Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/bnxt: fix speed setting on certain adapters

On BCM957508-N2100 adapters, FW will not allow any user other
than BMC to shutdown the port. As a result, bnxt_get_hwrm_link_config()
always returns link up.

Because of this, driver will not update the new port configurations
such as speed, autoneg during a port start.

Fixed the condition to invoke bnxt_set_hwrm_link_config() in
bnxt_init_chip().

Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix L2 filter allocation

DPDK does not support RoCE and XDP. The driver should set the
bit 5:4 of the flag to 1 and set bit 6 of the flag in the
HWRM_CFA_L2_FILTER_ALLOC command to disable RoCE and XDP features.

This change will greatly reduce the CFA resource consumption.

Fixes: f92735db1e4c ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix crash in vector mode Tx

rte_pktmbuf_prefree_seg() can return NULL if the mbuf still
has remaining references on it.

Adding a NULL check to prevent segfault.

Fixes: bc4a000f2f53 ("net/bnxt: implement SSE vector mode")
Fixes: 398358341419 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix structure variable initialization

During port start if bnxt_alloc_all_hwrm_stat_ctxs() fails,
in the cleanup path we do see errors like below:

bnxt_hwrm_ring_free(): hwrm_ring_free cp failed. rc:2
bnxt_hwrm_ring_free(): hwrm_ring_free rx failed. rc:2

The reason for this is in bnxt_free_all_hwrm_rings(), the check
is made against "ring->fw_ring_id != INVALID_HW_RING_ID" which
always return true as ring->fw_ring_id is not set to INVALID_HW_RING_ID
while initialising the ring structs.

Fixes: 6eb3cc2294fd ("net/bnxt: add initial Tx code")
Fixes: 2eb53b134aae ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix LRO configuration

The maximum number of TCP segments that can be aggregated & the
maximum number of aggregations the VNIC supports are configured
incorrectly during LRO configuration.

This patch fixes these values.

Fixes: b150a7e7ee66 ("net/bnxt: support LRO on Thor adapters")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix endianness while setting L4 destination port

Use "req.tunnel_dst_port_val" in bnxt_hwrm_tunnel_dst_port_alloc()
as big endian since hwrm spec mandates this field in network byte order.

Also, fixed the endianness while parsing the command output.

Fixes: 10d074b2022d ("net/bnxt: support tunneling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: fix VF representor port add

Fix VF representor port add when it's endpoint interface is down.
While adding vf representor port to a bridge, vnic & svif information of
vf representors endpoint(VF) would be needed to program default flow
rules.
However, if the endpoint interface is down when vf representor port is
added, firmware will return invalid vnic & svif information.

This patch fixes the problem by registering to DEFAULT_VNIC_CHANGE
async event and once the async event is received, use the endpoint
information(VF's fid) to fetch it's vnic & svif information and
program the default flow rules.

Fixes: 322bd6e70272 ("net/bnxt: add port representor infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: cleanup and check ULP context allocation

Set ulp_ctx explicitly to NULL in ulp_ctx_deinit() so that representor
init is aborted if parent ulp context is not initialized.
Also check for the same before creation of port default rules.
Additional checks added in VF rep dev ops for proper parent dev
initialization, to avoid null pointer dereference.

Fixes: 322bd6e70272 ("net/bnxt: add port representor infrastructure")
Fixes: 313ac35ac701 ("net/bnxt: support ULP session manager init")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: lookup default action record PARIF

The lookup default action record parif table is updated to catch
the miss path for the entries in the exact match table.
PARIF is handler to a partition of the physical port. The lookup
parif table contains entries for each incoming interface the default
action for the miss entries that do not match the configured rules in
the exact match table. This fix configures those entries in that table.

Fixes: fe82f3e02701 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: configure loopback PARIF for egress flows

Configure loopback parif for full offload egress flows.
PARIF is handler to a partition of the physical port.
The full offload egress flows for the VF rep interface must
use loopback parif to offload missed flows. The miss
flow path for the VF rep interface has to be loopback interface
parif entry and for the non-VF rep interface it has to be the
interface's parif entry.

Fixes: fe82f3e02701 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove redundant null check

In bnxt_validate_and_parse_flow_type
vxlan_spec cannot be NULL since its already being accessed
before. Remove the redundant NULL check.

Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: add memory allocation check in VF info init

The function rte_malloc() could return NULL, the return
value need to be checked.

Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix memory leak when freeing VF info

When freeing a vf_info, we should free the 'vlan_as_table'
and 'vlan_table' for the vf_info.

Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/af_xdp: change return value from Rx to unsigned

The af_xdp rx function was returning a negative value on error, when an
unsigned value is expected. Fix this.

Fixes: d8a210774e1d ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/fm10k: use inclusive engineering terminology

Offensive terms should be replaced with more inclusive engineering
terms.
Deprecated terms include "master/slave" and "blacklist/whitelist".

Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix flow director GTPU rule creation

For GTPU rule without extend header the training packet
for FDIR is different. This patch enable these case.

Fixes: 934fd00c9389 ("net/ice/base: fix GTPU IP hash")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: fix hash parser

GTPU TEID hash should only be enabled when ETH_RSS_GTPU is required.
And the hash parser should not restrict the combined usage of protocol.

Fixes: e7cc68c70736 ("net/ice: fix GTPU TEID hash")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

doc: update ice production information

The E810 (ice) has been shipping to customers, not just for evaluation
any more.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice: support auxiliary IP offset Rx descriptor

Add RXDID #25 to support Auxiliary IP Offset Rx descriptor, including
FlexiMD.4: Outer/Single IPv4 Header offset
FlexiMD.5: Outer/Single IPv6 Header offset
And parse the valid IP Offset into mbuf by flexible descriptor
section via devargs "proto_xtr" with "proto_xtr=ip_offset".

Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>

common/iavf: mark internal symbols

According to ABI policy, the internal functions should have the new tag
__rte_internal and linked into INTERNAL sessions.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ice: fix VF index check for DCF

The vf index in rte_flow command need to check in order that not larger
than actual vf number. Also change some error log for wrong action.

Fixes: 829c3106812d ("net/ice: enable switch flow on DCF")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: update version

Update base code version in readme.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>