net/virtio-user: specify MAC of the tap

When using virtio-user with vhost-kernel to exchange
packet with kernel networking stack, application can
set the MAC of the tap interface via parameter.

Signed-off-by: Ning Li <muziding001@163.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
Tested-by: Seán Harte <seanbh@gmail.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>

net/cxgbe: convert to SPDX license tags

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>

net/cxgbe: support setting MAC address

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add VF port statistics

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: update Tx and Rx path for VF

On TX path, add fw_eth_tx_pkt_vm_wr to transmit packets over VF.
Use is_pf4() to correctly calculate the work request size and
offsets within the work request.  On RX path, use pktshift to adjust
data offset within the mbuf.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: enable RSS for VF

Query firmware and configure RSS for VF.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: initialize SGE and queues for VF

Query firmware and initialize SGE parameters and enable queue
allocation for VF.  Calculate pcie channel and queue congestion
management for VF.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add probe to initialize VF devices

Add probe to initialize VF devices.  Separate init/de-init paths
for PF and VF.  Do firmware state initialization wrt VF and retrieve
various operational parameters by querying firmware.  Finally configure
and initialize ports.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add base for enabling VF ports

Add base to enable VF ports in subsequent patches.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add VF firmware mailbox

Add firmware mailbox communication support for VF.  Add is_pf4()
to check if driver is attached to PF4.  Use is_pf4() to determine
whether to use PF or VF mailbox communication.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/cxgbe: add skeleton VF driver

Add minimal VF driver.  Declare functions common to both PF and VF
functionality in separate header file and import the header file.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/avp: convert to SPDX license tags

As per the following commit the AVP files maintained by Wind River are
converted to use the SPDX license tag format.

    commit a4862c9e1a98 ("license: introduce SPDX identifiers")

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/liquidio: move to new offload API

Make use of new offloads member instead of bit fields in port Rx conf.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>

net/mlx5: fix RSS key length query

The RSS key length returned by rte_eth_dev_info_get command was taken
from the
PMD private structure. This structure initialization was done only after
the port configuration.

Considering Mellanox device supports only 40B long RSS key, reporting
the fixed number instead.

Fixes: 29c1d8bb3e79 ("net/mlx5: handle a single RSS hash key for all protocols")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: enforce RSS key length limitation

RSS hash key must be 40 Bytes long.

Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: setup RSS regardless of queue count

In some environments it is desirable to have the NIC perform RSS
normally on the packet regardless of the number of queues configured.
The RSS hash result that is stored in the mbuf can then be used by
the application to make decisions about how to distribute workloads
to threads, secondary processes, or even virtual machines if the
application is a virtual switch.  This change to the mlx5 driver
aligns with how other drivers in the Intel family work.

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Allain Legacy <allain.legacy@windriver.com>

net/mlx5: fix icc build

Remove the second declaration of device_attr [1] inside the loop as well as
the query_device_ex() which has already been done outside of the loop.

[1] https://dpdk.org/ml/archives/dev/2018-March/091744.html

Fixes: 9a761de8ea14 ("net/mlx5: flow counter support")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: fix TSO enablement

TSO should be set if either of the TSO offload flags is requested.

Fixes: dbccb4cddcd2 ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/igb: fix flow RSS queue index

Igb has a bug about queue index for rss rule flow configuration
when set redirection table.

Fixes: 424ae915baf0 ("net/e1000: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40evf: add multicast MAC address filtering

Add support the set_mc_addr_list device operation in the i40evf PMD.

The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix flow RSS configuration error

I40e needs a protection for rss rule flow configuration
after a rule is set for a port.

Fixes: ecad87d22383 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix intr callback unregister by adding retry

The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.

Fixes: d42aaf30008b ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/sfc: add device parameter to choose FW variant

Add support of choice the preferred firmware variant to use in device
parameters.

Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: add values for RxDPCPU firmware id recognition

Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc/base: support choosing firmware variant

Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/bnxt: fix flow director with same cmd different queue

When user reissues same flow director cmd with a different queue
update the existing filter to redirect flow to the new desired
queue as destination just like the other filters like 5 tuple and
generic flow.

Fixes: 2d64da097aa0 ("net/bnxt: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/sfc: fix type of opaque pointer in perf profile handler

The 'opaque' pointer in handler function is the last argument
of sfc_kvargs_process() function and it is pointer to the adapter
'evq_flags' that has a uint32_t type. So 'value' must be pointer
to uint32_t.

Fixes: c22d3c508e0c ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: fix queue start

Device must be started before start any queue.

Fixes: 0748be2cf9a2 ("ethdev: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

ethdev: return named opaque type instead of void pointer

"struct rte_eth_rxtx_callback" is defined as internal data structure and
used as named opaque type.

So the functions that are adding callbacks can return objects in this
type instead of void pointer.

Also const qualifier added to "struct rte_eth_rxtx_callback *" to
protect it better from application modification.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

net/avp: conform to new ethdev offload API

This change updates the AVP driver to conform with the new ethdev
offload API.  As per these commits:

    commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")'
    commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")'

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>

net/sfc: fix mbuf data alignment calculation

Unlike ffs() rte_bsf32() counts bit position from 0.

Fixes: 0c7a0c35f24c ("net/sfc: calculate Rx buffer size which may be used")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: remove unused struct forward declaration

Fixes: 331c447ad913 ("ethdev: separate internal structures into own header")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

ethdev: support dynamic logging

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>

net/dpaa: prefer defines for link speed values

Use existing defines instead of hardcoded vales.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>

net/bnxt: fix LRO disable

When the vnic_tpa_cfg HWRM command is sent to the FW,
we are not passing the VNIC ID in case of disable.
This can cause the FW to return an error.
Correct VNIC ID needs to be passed for both enable and disable.

Fixes: 0958d8b6435d ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

ethdev: fix port id storage

port_id is now 16bits, update function parameter according.

Fixes: 4c270218aa26 ("ethdev: support security APIs")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>

net/sfc: add dynamic log level for MCDI messages

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: remove dedicated init log parameter

The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: prepare to merge init logs with main log type

Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: support per-port dynamic logging

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: support driver-wide dynamic logging

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

eal: register log type and pick level from args

Dynamic log types are registered on RTE_INIT() step.
This allows one to set log levels by EAL options on
application launch. However, this does not allow to
manage log types if they are created during runtime.

EAL does not store log levels and types passed from
the command line. Thus, they cannot be picked later.
This is an obvious flaw since it would be better to
be able to pick levels for dynamic types registered
for runtime-determined facilities such as NIC ports.

This patch provides a mechanism to store log levels
passed from EAL options and adds an API to register
log types and pick levels from the internal storage.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: refuse empty VLAN flow specification

Verbs specification doesn't help to distinguish between packets having an
VLAN and those which do not have, this ends by having flow rule which does
not react as the user expects e.g.

 flow create 0 ingress pattern eth / vlan / end action queue index 0 / end
 flow create 0 ingress pattern eth / end action queue index 1 / end

are colliding in Verbs definition as in both rule are matching packets with
or without VLAN.
For this reason, the VLAN specification must not be empty, otherwise the
PMD has to refuse it.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: improve flow error explanation

Fill the error context in conversion function to provide a better reason on
why it cannot be done to the user.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: change tunnel flow priority

Packet matching inner and outer flow rules are caught by the first one
added in the device as both flows are configured with the same priority.
To avoid such situation, the inner flow can have an higher priority than
the outer ones as their pattern matching will otherwise collide.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: fix link status to use wait to complete

Wait to complete is present to let the application get a correct status
when it requires it, it should not be ignored.

Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Fixes: cb8faed7dde8 ("mlx5: support link status update")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix link status behavior

This behavior is mixed between what should be handled by the application
and what is under PMD responsibility.

According to DPDK API:
- link_update() should only query the link status [1]
- link_set_{up,down}() should only set the link to the according status [1]
- dev_{start,stop}() should enable/disable traffic reception/emission [2]

On this PMD, the link status is retrieved from the net device associated
owned by the Linux Kernel, it does not means that even when this interface
is down, the PMD cannot send/receive traffic from the NIC those two
information are unrelated, until the physical port is active and has a
link, the PMD can receive/send traffic on the wire.

According to DPDK API, calling the rte_eth_dev_start() even when the Linux
interface link is down is then possible and allowed, as the traffic will
flow between the DPDK application and the Physical port.

This also means that a synchronization between the Linux interface and the
DPDK application remains under the DPDK application responsibility.

To handle such synchronization the application should behave as the
following scheme, to start:

 rte_eth_get_link(port_id, &link);
 if (link.link_status == ETH_DOWN)
rte_eth_dev_set_link_up(port_id);
 rte_eth_dev_start(port_id);

Taking in account the possible returned values for each function.

and to stop:

 rte_eth_dev_stop(port_id);
 rte_eth_dev_set_link_down(port_id);

The application should also set the LSC interrupt callbacks to catch and
behave accordingly when the administrator set the Linux device down/up.
The same callbacks are called when the link on the medium falls/raise.

[1] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev_core.h
[2] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev.h#n1677

Fixes: c7bf62255edf ("net/mlx5: fix handling link status event")
Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/mlx5: remove kernel version check

Kernel version check was introduced in
commit 3a49ffe38a95 ("net/mlx5: fix link status query")
due to a bug fixed by
commit ef09a7fc7620 ("net/mlx5: fix inconsistent link status query")

This patch restore the previous behavior as described in Linux API.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix ARM build

rdma-core v16 has a bug. The following compilation error occurs on ARM
hosts.

In file included
from drivers/net/mlx5/mlx5_glue.h:16:0,
from drivers/net/mlx5/mlx5_glue.c:11:
/usr/include/infiniband/mlx5dv.h:144:2: error: unknown type name 'off_t'
off_t   uar_mmap_offset;
^

As a temporary fix, sys/types.h is included in PMD. This has been fixed in
rdma-core v17. This can be removed when all the Linux distros are shipped
with rdma-core v17 or back-ported fix. As of now, RedHat 7.5 is known to
have rdma-core v16.

Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix existing file removal

There is no guarantee that the file won't be removed by external
user/application between the stat() and remove() syscalls, remove() will
fail if the file no longer exists.

Fixes: f8b9a3bad467 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: use dynamic logging

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: use port id in PMD log

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: standardize on negative errno values

Set rte_errno systematically as well.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: change non failing function return values

These functions return int although they are not supposed to fail,
resulting in unnecessary checks in their callers.
Some are returning error where is should be a boolean.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: prefix all functions with mlx5

This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.

At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: remove control path locks

In priv struct only the memory region needs to be protected against
concurrent access between the control plane and the data plane.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: remove useless empty lines

Some empty lines have been added in the middle of the code without any
reason.  This commit removes them.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: add missing function documentation

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: normalize function prototypes

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: mark parameters with unused attribute

Replaces all (void)foo; by __rte_unused macro except when variables are
under #if statements.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: name parameters in function prototypes

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix sriov flag

priv_get_num_vfs() was used to help the PMD in prefetching the mbuf in
datapath when the PMD was behaving in VF mode.
This knowledge is no more used.

Fixes: 528a9fbec6de ("net/mlx5: support ConnectX-5 devices")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mrvl: fix Rx descriptors number

Since filling hardware buffer pool (bpool) is Rx related
constant describing maximum number of rx descriptors
instead of maximum number of Tx descriptors should be used.

Fixes: 0ddc9b815b11 ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: fix typo in log message

Show appropriate log message in case Tx offloads are either
not supported or missing.

Fixes: 7d8f6c20cc7c ("net/mrvl: switch to the new Tx offload API")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/tap: allow user MAC to be passed as args

Allow TAP PMD to pass user desired MAC address as argument.
The argument value is processed as string delimited by  ':',
is parsed and converted to HEX MAC address after validation.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>

net/null: support bulk allocation

Bulk allocation of multiple mbufs increased more than ~2%  and less
than 8% throughput on single core (1.8 GHz), based on usage for example
1: Testpmd case: Two null devices with copy 8% improvement.
    testpmd -c 0x3 -n 4 --socket-mem 1024,1024
--vdev 'eth_null0,size=64,copy=1' --vdev 'eth_null1,size=64,copy=1'
-- -i -a --coremask=0x2 --txrst=64 --txfreet=64 --txd=256
--rxd=256 --rxfreet=64 --burst=64 --txpt=64 --txq=1 --rxq=1 --numa
2. Ovs switch case: 2% improvement.
$VSCTL add-port ovs-br dpdk1 -- set Interface dpdk1 type=dpdk \
        options:dpdk-devargs=eth_null0,size=64,copy=1
$VSCTL add-port ovs-br dpdk2 -- set Interface dpdk2 type=dpdk \
        options:dpdk-devargs=eth_null1,size=64,copy=1

Signed-off-by: Mallesh Koujalagi <malleshx.koujalagi@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/null: set different MAC address for each device

Previously all null devices were getting MAC address "00:00:00:00:00:00"

After attaching two Null device to OVS, seeing "00.00.00.00.00.00" mac
address for both null devices.

Fix this issue, by setting different mac address.

Signed-off-by: Mallesh Koujalagi <malleshx.koujalagi@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/bonding: set MTU on slave configure

When a slave is configured make sure that the slave's MTU
matches the bonding's idea of the MTU.

Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>

net/enic: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

This driver was not doing atomic update of link status information.
And the return value was different than others.
The hardware also does not do autonegotiation (at least on Linux).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/octeontx: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/szedata2: use link status helper functions

Yet another driver which was not returing correct value on
link change.

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Since this driver can't be built on x86 could not even
do a compile test.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/thunderx: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/liquidio: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
And cleanup the logic in the the link update routine.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/i40e: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ixgbe: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/e1000: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/nfp: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/dpaa2: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/vmxnet3: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Also remove no longer necessary include of rte_atomic.h

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/virtio: use link status helper functions

Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: add link status get/set helper functions

Many drivers are all doing copy/paste of the same code to atomically
update the link status. Reduce duplication, and allow for future
changes by having common function for this.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

eal: introduce atomic exchange operation

To handle atomic update of link status (64 bit), every driver
was doing its own version using cmpset.
Atomic exchange is a useful primitive in its own right;
therefore make it a EAL routine.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/mrvl: add Tx queue start/stop

Add Tx queue start/stop feature.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: add Rx flow control

Add Rx side flow control support.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: add extended statistics

Add extended statistics implementation.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: support classifier

Add classifier configuration support via rte_flow api.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: document policer/scheduler/rate limiter usage

Add documentation and example for ingress policer, egress scheduler
and egress rate limiter.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: support egress scheduler/rate limiter

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: support ingress policer

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: fix crash when port is closed without starting

Fixes: 0ddc9b815b11 ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>

net/mrvl: convert license headers to SPDX tags

Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/vmxnet3: keep consistent link status

Bonding may examine the link properties to ensure that matching interfaces
are bound together.  If the link is going to have fixed properties,
these need to remain consistent regardless of the link_status or the
state of the adapter.

Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>

net/vmxnet3: set the queue shared buffer at start

If a reconfiguration happens, queuedesc is reallocated.  Any queues that
are preserved point to the previous queuedesc since the queues are only
configured during queue setup.  Delay configuration of the shared queue
pointers until device start when queuedesc is no longer changing.

Fixes: 8618d19b52b1 ("net/vmxnet3: reallocate shared memzone on re-config")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>

net/mlx: fix rdma-core glue path with EAL plugins

Glue object files are looked up in RTE_EAL_PMD_PATH by default when set and
should be installed in this directory.

During startup, EAL attempts to load them automatically like other plug-ins
found there. While normally harmless, dlopen() fails when rdma-core is not
installed, EAL interprets this as a fatal error and terminates the
application.

This patch requests glue objects to be installed in a different directory
to prevent their automatic loading by EAL since they are PMD helpers, not
actual DPDK plug-ins.

Fixes: f6242d0655cd ("net/mlx: make rdma-core glue path configurable")
Cc: stable@dpdk.org
Reported-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Tested-by: Timothy Redaelli <tredaelli@redhat.com>

net/i40e: fix link update no wait

In i40e_dev_link_update() the driver obtains the link status
info via admin queue command despite of "no_wait" flag. This
requires relatively long time and may be a problem to some
application such as ovs-dpdk.
(https://bugzilla.redhat.com/show_bug.cgi?id=1551761).

This patch aims to fix the problem by using a different
approach of obtaining link status for i40e NIC without waiting.
Instead of getting the link status via admin queue command,
this patch reads the link status registers to accelerate the
procedure.

Fixes: 263333bbb7a9 ("i40e: fix link status timeout")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

vhost: add note about sockets in server mode

From time to time, someone sends patches about unlinking existing
sockets when registering a vhost user in server mode.

A recent example:
http://dpdk.org/ml/archives/dev/2018-February/090025.html

This problem has been discussed many times, and it was made clear that
the library should not unlink files given by the application in order
to avoid possible security problems, such as removing random files
used by other programs.

One of the first discussions:
http://dpdk.org/ml/archives/dev/2015-December/030326.html

To avoid such patches in the future, it was decided to add a comment
that explains what is happening and tries to describe the reasoning.

Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/enic: support meson

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

net/enic: avoid strict aliasing warnings

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>

doc: describe Rx bytes counter behavior for enic

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>