net/bnxt: advertise scatter Rx offload capability

Scattered receive is supported but not included in receive offload
capabilities. Fix by adding it and including in scattered receive
calculation.

Fixes: 9c1507d96ab8 ("net/bnxt: switch to the new offload API")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix default Rx queue for Thor

Use first receive queue assigned to VNIC as the default receive queue
when configuring Thor VNICs. This is necessary e.g. in order for flow
redirection to a specific receive queue to work correctly.

Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix stats context calculation

The required number of statistics contexts is computed as the sum
of the number of receive and transmit rings plus one for the async
completion ring. A statistics context is not actually required for
the async completion ring, so remove it from the calculation.

Fixes: bd0a14c99f65 ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: use common NQ ring

Thor queue scaling is currently limited by the number of NQs that
can be allocated. Fix by using a common NQ for all receive/transmit
rings instead of allocating a separate NQ for each ring.

Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: support CoS classification

Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support LRO on Thor adapters

Add support for LRO for adapters based on Thor (BCM57508).

Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix ring alignment for Thor-based adapters

When using transmit/receive queue sizes smaller than 256, alignment
requirements are not being met for Thor-based adapters. Fix by
forcing memory addresses used for transmit/receive/aggregation ring
allocations to be on 4K boundaries.

Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: increase TQM entry allocation

The current TQM backing store size isn't sufficient to allow 512
transmit rings. Fix by correcting TQM SP queue size calculation.

Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/atlantic: add FW mailbox guard mutex

Driver uses the Firmware mailbox to read statistics and configure
some features.
This patch introduces a mutex to provide consistent access to the
FW mailbox to prevent potential data corruption.

Fixes: 86d36773bd42 ("net/atlantic: implement firmware operations")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>

net/atlantic: fix reported flow control mode

Driver reports current flow control mode based on internal flow control
settings. Currently this logic works incorrectly.

Fixes: 921eb6b8ce31 ("net/atlantic: fix flow control by sync settings on Rx")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>

net/atlantic: exclude MACsec counters from xstats

Currently, driver always return full set of xstats counters, including
MACSEC counters. But this driver also supports AQC100 chips, which
does not have MACSEC feature.
This fix adds checking for MACSEC availability (based on FW capability
bits) and returns xstats without MACSEC counters if MACSEC feature
is not available.

Fixes: 09d4dfa85359 ("net/atlantic: implement MACsec statistics")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>

net/octeontx2: fix CQE ring prefetch on wrap around

When computing the head of CQE ring of prefetch, use qmask to point to
the correct head index on wrap around case.

Fixes: cc4d7693f2d9 ("net/octeontx2: support Rx")
Cc: stable@dpdk.org
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/bnx2x: update to latest FW 7.13.11

Use latest firmware 7.13.11.

7.13.11 FW changelog:
    - Packets from a VF with pvid configured which were sent with a
      different vlan were transmitted instead of being discarded.
    - In some multi-function configurations, inter-PF and inter-VF
      Tx switching is incorrectly enabled.
    - Wrong assert code in FLR final cleanup in case it is sent not
      after FLR.
    - Chip may stall in very rare cases under heavy traffic with FW GRO
      enabled.
    - VF malicious notification error fixes.
    - Default gre tunnel to IPGRE which allows proper RSS for IPGRE
      packets, L2GRE traffic will reach single queue.
    - Removes unnecessary internal mem config, latest FW performs this
      autonomously.

Update the PMD version to 1.1.0.1.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/bnx2x: update HSI

Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/bnx2x: update and reorganize HW registers

Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/qede: limit Rx ring index read for debug

Caught by clang, this idx value is only used for a debug message when
the mbufs allocation fails.
No need to use idx as a temporary storage.

Fixes: 8f2312474529 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>

net/octeontx2: support GRE TSO offload

Extends existing TSO support to GRE tunnel on the
same SoC revisions.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

net/octeontx2: support TSO offload

Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]

This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

net/octeontx2: extract NVGRE as ltype

Adding change to sync RTE Flow with KPU profile to extract
NVGRE as ltype.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: support Tx descriptor status

Adding support for tx descriptor status dev ops for octeontx2.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: update KPU parser profile

Update LB ltypes and use the updated ones so as replace
LB_STAG and LB_QINQ by single LB_STAG_QINQ ltype.

Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net/octeontx2: allow VFs to enable back pressure

Allow VFs to enable backpressure for performance reasons.
The backpressure control is with kernel AF driver that will enable
backpressure even if one PF/VF requests it and disable it only
after all the PFs/VFs request for disable.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

net/octeontx2: fix checksum flag translation

NPC errors were incorrectly translated to ol_flag as
error code enum was not in sync with NPC profile.

Fixes: 371d3212cbed ("common/octeontx2: add build infrastructure and HW definition")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

net: add missing rte prefix for ESP tail

This structure has been missed during the big rework.

Fixes: 5ef254676752 ("net: add rte prefix to ESP structure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/bnxt: fix flow flush handling

We are not freeing all the flows when a flow_flush is called.
Iterate through all the flows belonging to all the VNICs in use and
free the filters.

Fixes: 4ace85a7da25 ("net/bnxt: allocate rings and groups")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: fix multicast filter programming

Fixed multicast filter programming and allmulti programming.
Fixed to skip programming multicast macs if the user requests
allmulti mode.

Also removed a comment in bnxt_hwrm_cfa_l2_set_rx_mask() which is
no longer valid now.

Fixes: d69851df12b2 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix VLAN filtering

Currently, when hw-vlan-filter is enabled on testpmd, driver is
receiving all vlan packets. Instead, it should only receive untagged
packets and vlan packets for which the VLAN filter is programmed.
This is because, the default rule to match on MAC is not getting
deleted, when hw-vlan-filter is ON.

This patch fixes the problem, by deleting the default MAC rule and
programming a new rule to receive only untagged packets, when
hw-vlan-filter is enabled & another rule for each vlan, as and when
that vlan is configured on that port.

Fixes: 246c5cc5f05e ("net/bnxt: use correct flags during VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: drop untagged frames when specified

When a drop action for L2 filters is specified, support it.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: synchronize between flow related functions

Currently, there are four flow related functions, namely
bnxt_flow_create, bnxt_flow_destroy, bnxt_flow_validate,
bnxt_flow_flush. All these functions are not multi-thread safe.

This patch fixes it by synchronizing these functions with a lock.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: handle cleanup if flow creation fails

If flow creation fails because of an HWRM command failure or
or some other reason, reset the vnic and rxq info set earlier.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: validate RSS hash key length

In bnxt_rss_hash_update_op, driver is proceeding with
bnxt_hwrm_vnic_rss_cfg even though RSS hashkey length is invalid.

This patch fixes the problem by returning -EINVAL when RSS hashkey
length is invalid.

Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: check for VNIC ID in rollback

If driver init/probe fails as part of cleanup/rollback, we may end
up invoking this HWRM cmd even on an invalid vNIC which will
unnecessarily log an error message as the cmd will fail.
Check for invalid ID before issuing the HWRM cmd

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: check if device is started before flow creation

Check device is started before flow creation.
Since the vnic data structures aren't created until device start,
the driver dereferences NULL vnic if flow creation is attempted before
device is started,

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: handle ring cleanup in case of error

Initialize all rings to INVALID_HW_RING_ID.
This can be used to determine the rings to free if allocation fails.

Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: allow only unicast MAC address filter creation

Check if the application is trying to create filters using
broadcast and multicast MAC address and reject it.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>

net/bnxt: fix setting default MAC address

Driver was incorrectly programming the MAC with the already
configured one instead of the newly requested MAC by user.

Also, fix to restore the old mac address back to the default
vnic filter if the mac update operation fails.

Fixes: 68f589f2c728 ("net/bnxt: fix setting primary MAC address")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: cleanup VNIC after flow validate

When an application issues flow validate, we free the temporary
filter that is created. But the vnic is not freed up. This can
potentially interfere with subsequent flow creation. So free the vnic.

Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: delete and flush L2 filters cleanly

Once the last filter associated with a VNIC is deleted when using
RSS action or the Queue action free the VNIC. Also free the RSS
context if the VNIC is using it.

Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: parse priority attribute for flow creation

Parse priority attribute during flow creation.
This information will be used to give a hint to the FW to
place the flow rule accordingly in the CFA tables.

Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support RSS action

Add support for RSS action during flow creation.

group id should not be 0 when RSS action is specified. Driver will
return an error for such a flow.

If a group id is used to create a filter with “n” RSS queues, it cannot
be used to create a filter with a different number of RSS queues till
all the flows using that combination are deleted.

While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same group id shall not create a flow with a different group of
Rx queue ids till all the flows belonging to the group ids are deleted.

While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same queue ids shall not be used with a different group id till
all flows created with that group id are deleted.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: support creating SMAC and inner DMAC filters

We are currently creating only outer DMAC filters.
Create SMAC and inner DMAC filters using HWRM_CFA_L2_FILTER_ALLOC.
For this the HWRM_CFA_L2_FILTER_ALLOC has already been updated.

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: allow flow creation when RSS is enabled

Currently flow creation is allowed with queue action only
when RSS is disabled. Remove this restriction. Flows can be
created when RSS is enabled.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: allow dynamic creation of VNIC

Refactor code to allow dynamic creation of VNIC for RSS
or Queue Action during flow create.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>

net/bnxt: return standard error codes for HWRM command

If the FW returns an error for an HWRM request, it does not necessarily
return standard error codes.
Convert these HWRM errors to standard errno.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/szedata2: fix dependency check

The library libsze2 provides a pkg-config file: libsze2.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().

If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.

Fixes: 508cfe6be9f1 ("net/szedata2: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>

net/nfb: fix dependency check

The library libnfb is part of netcope-common which provides
a pkg-config file: netcope-common.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().

If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.

Fixes: 6435f9a0ac22 ("net/nfb: add new netcope driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>

net/qede: re-add to meson

qede has been dropped from the drivers/net meson.
Add it again.

Fixes: 9a8864c8b5da ("net/octeontx2: add build and doc infrastructure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/dpaa2: add soft parser driver

Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support soft parser in MC

Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa2: support separate MC portal per process

Earlier, there was a single MCP handle which was available across
complete DPAA2 driver as well as part of the dev_private which was
shared by the secondary process.

For secondary, that is not valid and it would require to open its
own handle for the MC. This is eventually used as part of the DPNI
configuration.

By using the process_private member of the rte_eth_dev, it is
possible to keep separate handles per process. Without worry of
overwriting when secondary process accesses the dev_private.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

bus/fslmc: support multi VFIO group

DPAA2 support VFIO device passthrough in VM.
However in this case, each device is associated with different vfio group.

This code required different container id for each group.
On using the same container fd the second time,
ioctl calls are returning error.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/fslmc: check for DMA map in primary process only

DMA mapping is a property of primary process - SMMU population done
once by primary doesn't need to be populated again in secondary

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

bus/fslmc: restrict address translation to PA mode

The address translation support for PA->VA is required only in
case of PA mode operation of DPDK. This was causing warning to
be reported on running any DPAA2 application in VA mode:

    Add: Incorrect entry for PA->VA Table(xxxxxxxxxx)
    Add: Lowest address: xxxxxxxxxxxx

This was caused by call to update the DPAAX table when VA mode
was enabled, in which case the VA==IOVA address.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa2: add PTP driver

This patch adds the support for PTP driver for
DPAA2 devices.

To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: add DPRTC sub-module

This patch add support for dprtc
(Data Path Real Time Clock) sub-module
based on MC 10.16.0 flib.

It provides interface for PTP stack software
to access physical IEEE 1588 Real Time Clock.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support timestamp

IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.

This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support Tx confirmation mode

TX confirmation mode provides dedicated confirmation
queues for transmitted packets. These queues are used
by software to get the status and release
transmitted packets buffers.

By default TX confirmation mode is kept disabled.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support DPDMUX classification for ethernet

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: use LFQIDs in Tx instead of QDID

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa2: support config max Rx length in HW

The MC expects the length to be configured without CRC

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: add CGR counters in xstats

Add congestion frame drop and byte drop count in xtra stats.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support taildrop on frame count basis

The existing taildrop was based on queue data size.
This patch replaces it with frame count bases using
CGR methods of DPAA2 device.
The number of CGRs are limited. So,
- use per queue CGR based tail drop for as many as CGR
available.
- Remaining queues shall use the legacy byte based tail drop

Number of CGRs can be controlled by dpl file during dpni_create.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: add optional non-prefetch Rx mode

When we need particular number of packets from the rx routine,
which would change in every call, we cannot prefetch the packets
and provide previous results to the user.

User can select the mode by using devargs for non prefetch mode.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: support L2 payload based RSS distribution

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: enable Rx offload for timestamp

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa2: realign Rx offload support types

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

mempool/dpaa: reduce debug messages

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

common/dpaax: reduce debug messages

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa2: improve Rx offload debug message

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: reduce debug messages

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa: support Tx scatter gather for non-DPAA buffer

This patch adds support for Scatter Gather
in the transmit side, for the cases where the
buffer are received which are not from DPAA
buffer pool.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support Rx interrupt enable and disable

This patch adds support for dpaa eth driver
interrupt enable and disable callback functions.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support Rx interrupt handler

This patch adds interrupt handler support for
the ethernet devices which are configured with
a dedicated portal for packet Rx
(i.e. for FQ's in push mode).

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: decouple FQ portal alloc and init

The decoupling of FQ portal allocation is required as a
pre-requisite to support Rx interrupts as we need to have
event FD's at portal allocation i.e. before the
initialization of the Frame Queues.
This change will help us get the event fd once the portals
have been allocated for static FQ's.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: remove thread affinity

Thread affinity is already taken care by DPDK. Remove them from bus.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: improve Rx offload debug message

This patch also align few RX offload support to right category.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

bus/dpaa: fix dpaa_sec blacklist

The black list of dpaa_sec devices fails.
EAL: failed to parse device "dpaa:dpaa_sec-1"

This patch address following issues:
- bus usages dpaa-sec while the driver usage dpaa_sec
- bus usages numbers from 0 to MAX_SEC - while driver
probe usages sec number form max-fman_device +1

Fixes: 6e0752205bb2 ("bus/dpaa: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>

net/bnxt: use macro for getting default VNIC

Minor code cleanup. BNXT_GET_DEFAULT_VNIC macro returns the default VNIC
of the function and fixed code to use the macro.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: support for QinQ insertion and stripping

Driver will accelerate only outer/S-VLAN insertion by turning on
the appropriate bits in the Tx Buffer Descriptor when the packet
arrives for transmission.
The TPID to be used for this S-VLAN is conveyed by the vlan_tpid_set
dev_op which will terminate in the driver.
In the Rx path, driver will continue providing the stripped vlan tag
in the mbuf's vlan tci field. This would be the outermost vlan tag
in a double-tagged packet or the vlan tag for a single vlan tagged pkt.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix crash in secondary process

The secondary process should not modify device state when
init is called. The pci device information pointed to by
dev_private pointer is not correct in secondary process.

Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix Rx queue count

Fix Computing of number of used descriptors in an Rx queue.

Fixes: 1b7ceba3e375 ("net/bnxt: support Rx queue count")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>

net/bnxt: fix accessing variable before null check

Check input argument "rxq" in bnxt_rx_queue_release_mbufs(), to be sure
variable is not NULL before accessing it.

Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>

net/bnxt: remove unnecessary interrupt disable

Since bnxt_enable_int() is called at start time,
invoke bnxt_disable_int() during stop only.
Remove it from device uninit function.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: remove unused macro

remove MAX_NUM_MAC_ADDR macro

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: remove unnecessary return check

HWRM_CHECK_RESULT_SILENT() returns if the HWRM command fails.
There is no need to check the return value after this call.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix deferred start of Tx queues

Driver should not change "deferred_start" state of the tx queues.
It should get the state in queue_setup_op() and use that value.

Since the deferred start state was being used in the packet transmit
functions to determine whether the queue has been stopped already,
introduced a per-txq flag to track queue stopped/started state.

Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix L2 context calculation for Thor

On Wh+, number of L2 context supported by FW is the sum of number of
EM flow count and number of L2 context count returned in HWRM_FUNC_QCFG.
This is not true for Thor. Restrict this only for Whitney for now.

Fixes: ff9c0ca47e81 ("net/bnxt: save the number of EM flow count")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix 40G link for Thor

Link auto negotiation for 40G is not supported by Thor.
Hence speed needs to be forced and autoneg disabled to configure 40G
speed.

Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix async link handling and update

When updating the link because of an async link notification
there is no need to set wait_for_completion. At this point
the link related information should be available without need to poll.
Use rte_eth_linkstatus_set instead of memcpy to ensure atomicity
while updating the link status.
We force the physical link down as a part of device stop.
But we are not waiting there enough and handling the async notification
before exiting. It just sits in the default CQ till we do a device
start.
Fix it by calling the CQ handler in device stop.

Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: subscribe to link speed change notification

We are not subscribing to link speed change notification.
This patch addresses that.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

net/bnxt: fix Rx queue start/stop

Driver should not change "deferred_start" state of the rx queues.
It should get the state in queue_setup_op() and use that value.

Since the deferred start state was being used in the packet receive
functions to determine whether a stopped rx ring should be polled,
introduced a per-rxq flag to track queue stopped/started state.

Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix forwarding with higher mbuf size

Maximum frame length supported by hw is 9600 bytes.
When user launches testpmd with --mbuf-size=9729,
we are posting buffer descriptors of size 9601 to the ring.
This was causing packets getting discarded.

Fixes: daef48efe5e5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix flow steering

When user creates a flow similar to an existing flow with just the
destination queue change, we delete the old filter and allocate a new
one with this destination queue change. We were also allocating a new L2
filter matching the same destination mac resulting in 2 L2 filters for the
same destination mac.
This was causing any flow matching the destination mac to be steered to
this queue instead of the default queue.

Fixed it by deleting this stale L2 filter.

Fixes: 5c1171c97216 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: enforce IO barrier for doorbell command

The doorbell ringing operation requires a rte_io_mb immediately to make
the command complete and visible to the device before reading the
response, otherwise it may read stale or invalid responses.

Fixes: ca241d9a0952 ("net/bnxt: use I/O device memory read/write API")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: replace memory barrier for doorbell response

To read the doorbell response, which is held in the host CIO memory,
rte_cio_rmb is sufficient.

Fixes: 804e746c7b73 ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove duplicate barrier

As there is an inclusive rte_io_wmb within the following rte_write32()
API who rings the doorbell, this makes the above rte_wmb unnecessary and
remove it.

Fixes: 1cd45aeb3270 ("net/bnxt: support Stratus VF device")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/ice: use relaxed and remove duplicate barrier

To guarantee the orderings of successive stores to CIO and MMIO memory,
a lighter weight rte_io_wmb [1] can be used instead of rte_wmb, and since
the ICE_PCI_REG_WRITE API already has an inclusive rte_io_wmb, this
explicit call can even be saved.

[1] http://git.dpdk.org/dpdk/tree/lib/librte_eal/common/include/generic/
rte_atomic.h#n98

Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: use relaxed and remove duplicate barrier

To guarantee the orderings of successive stores to CIO and MMIO memory,
a lighter weight rte_io_wmb [1] can be used instead of rte_wmb, and since
the I40E_PCI_REG_WRITE API already has an inclusive rte_io_wmb, this
explicit call can be even saved.

[1] http://git.dpdk.org/dpdk/tree/lib/librte_eal/common/include/generic/
rte_atomic.h#n98

Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/bnxt: support PTP for Thor

On Thor, direct access to PTP registers (via GRC) is not supported.
Driver must use HWRM to access the timestamp information.

Vectorized Rx/Tx cannot be enabled if RTE_LIBRTE_IEEE1588=y.
Remove the PTP flags handling code from the vector Rx path.

Add support to read tx timestamp value and the time from the
timesync clock.

On Thor, Rx timestamps are provided directly in the Rx completion
records to the driver. Only 32 bits of the timestamp is present in
the completion. Driver needs to read the current 48 bit free running
timer using the HWRM_PORT_TS_QUERY command and combine the upper
16 bits from the HWRM response with the lower 32 bits in the
Rx completion to produce the 48 bit timestamp for the Rx packet.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: use macro for bit definitions

use BIT macro instead of bit fields.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>