maintainers: update for igb/igc/ixgbe

Co-work with Jeff, setting me as new maintainer for igb, igc and ixgbe.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

net: check first segment length on SW VLAN insertion

SW VLAN insertion relies on Ethernet addresses location in contiguous
memory (do not split across mbuf segments). There is no any formal
requirements on data location and mbuf structure which guarantee it.
So, check it explicitly to avoid corrupted packets if the condition
is violated. Typically software VLAN insertion is done on Tx prepare
stage and application will get indication that the packet is invalid
and cannot be transmitted.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/octeontx2: support TM length adjust and packet mode

This patch adds support to packet length adjust TM feature
for private shaper. It also adds support to packet mode
feature that applies both to private shaper and node DWRR
scheduling of SP children.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

app/testpmd: add TM command for non-leaf and packet mode

Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".

Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.

This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

drivers/net: update TM capability

Since existing PMD's support shaper byte mode and scheduler
wfq byte mode, update the same in their port/level/node capabilities
that are added. SoftNIC PMD is already upto date with new capabilities.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>

ethdev: support TM for shaper config in packet mode

Some NIC hardware support shaper to work in packet mode i.e
shaping or ratelimiting traffic is in packets per second (PPS) as
opposed to default bytes per second (BPS). Hence this patch
adds support to configure shared or private shaper in packet mode,
provide rate in PPS and add related tm capabilities in port/level/node
capability structures.

This patch also updates tm port/level/node capability structures with
exiting features of scheduler wfq packet mode, scheduler wfq byte mode
and private/shared shaper byte mode.

SoftNIC PMD is also updated with new capabilities.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

net/iavf: support outer IP hash for GTPC

Add patterns and headers for GTPC, now outer IP hash can be configured
as input sets for GTPC packets.

Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: update version

Update base code version in readme.

Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: fix PHY config param when enabling EEE

The i40e_enable_eee function did not copy phy_type_ext field
from current PHY configuration retrieved with Get PHY Abilities AQ.
It caused a misconfiguration of the PHY on devices supporting 2.5
and 5G speeds and prevented establishing link when only those
speeds were selected for advertisement.

Fixes: c61bcb0fe1b0 ("net/i40e/base: support Energy Efficient Ethernet")
Cc: stable@dpdk.org
Signed-off-by: Galazka Krzysztof <krzysztof.galazka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: add EEE LPI status check for X722

Add reading LPI (low power idle) status for supported X722 devices.
If adapter's PHY supports EEE in current mode (device ID + link speed),
LPI status is read from PHY Clause 45 PCS status register.

Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: fix Rx only for unicast promisc on VLAN

Set promiscuous mode to rx traffic only if VSI has VLANs configured.
Rename misleading PROMISC_TX bit to proper name.
Added I40E_AQC_SET_VSI_PROMISC_RX_ONLY during VSI unicast promiscuous
mode configuration with port VLAN.
Aligned unicast promiscuous with VLAN to the one without VLAN.
Previously other VFs could listen to unicast tx traffic of other VFs.

Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: support minimum rollback revision

Add support for minimum rollback revision.

Signed-off-by: Przemyslaw Ciesielski <przemyslaw.ciesielski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: fix function header arguments

Fix them by adding the argument descriptions.

Fixes: 0d9d27bb8684 ("i40e/base: prepare local LLDP MIB in TLV")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e/base: update FW API version

Update FW increment API version for:
-NVM FW Lockdown Feature for legacy devices
-Security Version Opt-In

Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/ice/base: preserve default aggregator VSI information

Added the change to keep the default aggregator VSI information.

Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: rename ACL priority values

The naming convention used to shorten 'priority' is 'prio'.
Convert the ACL related entries that use 'prior' to 'prio'.

Also, as ICE_LOW, ICE_NORMAL,... are not very descriptive of what
they represent. Add 'ACL_PRIO' to help convey their use.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove unnecessary conditional

These two conditional statements are unnecessary because the condition
is always true based on existing code flow.  Remove them to resolve
potential errors from some static analysis tools.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: rename function

'xtrct' or 'xtract' is currently used in the code to shorten 'extract'.
Rename ice_prgm_acl_prof_extrt() to ice_prgm_acl_prof_xtrct() so we don't
have another variation of a 'extract'.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cache NVM module bank information

The ice flash contains two copies of each of the NVM, Option ROM, and
Netlist modules. Each bank has a pointer word and a size word. In order
to correctly read from the active flash bank, the driver must calculate
the offset manually.

During NVM initialization, read the Shadow RAM control word and
determine which bank is active for each NVM module. Additionally, cache
the size and pointer values for use in calculating the correct offset.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup code

Remove unnecessary mac_type check, fix couple comment, and remove
unnecessary empty line.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove unused parameter

remove unused parameter of ice_parse_fdir_func_caps

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: separate NVM version struct

The ice_nvm_info structure has become somewhat of a dumping ground for
all of the fields related to flash version. It holds the NVM version and
EETRACK id, the OptionROM info structure, the flash size, the ShadowRAM
size, and more.

A future change is going to add the ability to read the NVM version and
EETRACK ID from the inactive NVM bank. To make this simpler, it is
useful to have these NVM version info fields extracted to their own
structure.

Rename ice_nvm_info into ice_flash_info, and create a separate
ice_nvm_info structure that will contain the eetrack and NVM map
version. Move the netlist_ver structure into ice_flash_info and rename it
ice_netlist_info for consistency.

Modify the static ice_get_orom_ver_info to take the option rom structure
as a pointer. This makes it more obvious what portion of the hw struct
is being modified. Do the same for ice_get_netlist_ver_info.

Introduce a new ice_get_nvm_ver_info function, which will be similar to
ice_get_orom_ver_info and ice_get_netlist_ver_info, used to keep the NVM
version extraction code co-located.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: enable QinQ filter for switch advanced rule

Enable QinQ type filter for switch advanced rule, it support tunnel
and non-tunnel packet use external and inner vlan id as input set
for rules, it also support session id as input set for PPPoE rule
with QinQ flag in packet.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: adjust rate limit profile ids runtime database

Moving the runtime profile ids database/storage to the hw structure.

Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: change misc ACL style

This is a collection of minor ACL style changes including:

- When there is nothing to unroll, return a value directly.
- Return ICE_SUCCESS(0) in cases where an error was previously checked
  so ICE_SUCCESS is the only possible return.
- Remove unnecessary parentheses and newlines
- Move unroll of allocation to end of function and use goto on errors to
  free.
- Fix function header comment style
- Remove 'else' from an 'if else' condition where both conditions return
  a value to reduce indentation.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: preserve NVM capabilities in safe mode

If the driver initializes in safe mode, it will call
ice_set_safe_mode_caps. This results in clearing the capabilities
structures, in order to set them up for operating in safe mode, ensuring
many features are disabled.

This has a side effect of also clearing the capability bits that relate
to NVM update. The result is that the device driver will not indicate
support for unified update, even if the firmware is capable.

Fix this by adding the relevant capability fields to the list of values
we preserve. To simplify the code, use a common_cap structure instead of
a handful of local variables. To reduce some duplication of the
capability name, introduce a couple of macros used to restore the
capabilities values from the cached copy.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove function ACL count query

Remove debug function ice_aq_query_acl_cntrs.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove repeated words

A new test in checkpatch detects repeated words; cleanup all pre-existing
occurrences of those now.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: check failed acts allocation

There is no check for failed allocation of 'acts'. Add a check and
return if memory was not successfully allocated. Also, as all 'goto out'
occur after this check there is no need to perform a check for 'acts' as
we will have returned if it is not set.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move a function

Move ice_flow_get_hw_prof, this is not necessary for DPDK, just
sync the code with other compile option which ice_flow_get_hw_prof
is declared as a static function.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clear advanced rules in reset preparation

Clear advanced rules from SW and HW before reset.

Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move a function

The only caller of this function is within the file so mark it as static
and move it up in the file to avoid a forward declaration.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: filter for GTPU outer IP without inner IP

Add ptype MAC_IPV4_GTPU into
ice_ptypes_ipv4_ofos, ice_ptypes_ipv4_ofos_all and ice_ipv4_ofos_no_l4

Add ptype MAC_IPV6_GTPU into
ice_ptypes_ipv6_ofos, ice_ptypes_ipv6_ofos_all and ice_ipv6_ofos_no_l4

Add ptype MAC_IPV4_GTPU and MAC_IPV6_GTPU into
the new ice_ptypes_gtpu_no_ip

So outer IP can be configured as input set for GTPU packet that without
inner IP layer.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support outer IP filter for GTPC

Add ptype MAC_IPV4_GTPC_TEID and MAC_IPV4_GTPC into
ice_ptypes_ipv4_ofos, ice_ptypes_ipv4_ofos_all and ice_ipv4_ofos_no_l4

Add ptype MAC_IPV6_GTPC_TEID and MAC_IPV6_GTPC into
ice_ptypes_ipv6_ofos, ice_ptypes_ipv6_ofos_all and ice_ipv6_ofos_no_l4

So outer IP can be configured as input set for GTPC packet.

Also add MAC_IPV4_GTPC_TEID and MAC_IPV6_GTPC_TEID into
ice_ptypes_gtpc, so when ICE_FLOW_SEG_HDR_GTPC is requested, it can
take effect on all GTPC packets (with or without TEID).

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: refactor DCB related variables

In this patch, the DCB related variables will be refactored out of the
ice_port_info_struct. The goal is to make the ice_port_info struct
cleaner.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: reduce profile to recip info get from firmware

Only need to get profile_to_recip info from firmware for
profiles used by switch, no need for other free profile
in order that we can reduce the time consumed when
download a switch rule.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce Tx rate limiting on port level

The PSM Configuration has a Rate Limiter for each associated
switch port based on its relative speed from the total BW of
switch ports connected to LAN controller. The rate limiters
will be dynamic get readjusted if switch port speeds are
changed at the root node layer of the scheduler tree. Adding
a function to directly modify the EIR of root node.

Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: join format strings to same line

When printing messages with ice_debug, align the printed string to the
origin line of the message in order to ease debugging and tracking
messages back to their source.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support GTP-U type switch rule

This patch add support for GTP-U type of switch rule.
It enable all GTP-U related ptype.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add AQ LLDP filter control command

As of NVM ver 1.7.1 there is a new AQ command to add and remove
LLDP filters for Rx flow.  This patch implements the support
structure to implement this functionality.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix abbreviations

Correct abbreviations as identified by abbrevcheck

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use for each bit iterator

A number of code flows iterate over a block of memory to do something
for every bit set in that memory. Use existing bit operations in a new
iterator macro to make those code flows cleaner.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add function header

Add a function header for ice_cfg_phy_fc()

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use bitmap hamming weight API

Introduce ice_bitmap_hweight() and use it instead of open-coding that
functionality.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use bitmap set API

Introduce ice_bitmap_set() and use it instead of open-coding that
functionality.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: replace single-element array hack

Convert the pre-C90-extension "C struct hack" method (using a single-
element array at the end of a structure for implementing variable-length
types) to the preferred use of C99 flexible array member.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: silence static analysis warning

Sparse warns about these casts to/from restricted types which are not
actual problems; silence the warnings.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup misleading comment

The maximum Admin Queue buffer size and NVM shadow RAM sector size are
both 4 Kilobytes. Some comments refer to those as 4Kb which can be
confused with 4 Kilobits.
Update the comments to use the commonly used KB symbol instead.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clean code wrapping

To make the wrapping a little cleaner, move the variables only applicable
to ICE_FC_AUTO into that case. Also move caching of the value to only occur
on success.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup stack hog

In ice_flow_add_prof_sync(), struct ice_flow_prof_params has recently
grown in size hogging stack space when allocated there.
Hogging stack space should be avoided. Change allocation to be on the
heap when needed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix issues around move nodes

1. Fixed the max children check when moving the last(8th) children. This
   allows the parent node to hold 8 children instead of 7.
2. Check whether the VSI is already part of the given aggregator subtree
   before moving it.

Fixes: 29a0c11489ef ("net/ice/base: clean code")
Cc: stable@dpdk.org
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: avoid single-member variable-length structs

There are a number of structures that consist of a one-element array as the
only struct member.  Some of those are unused (ice_aqc_add_get_recipe_data,
ice_aqc_get_port_options_data, ice_aqc_dis_txq, etc.) so remove them.
Others are used to index into a buffer/array consisting of a variable
number of a different data or structure type.  Those are unnecessary since
we can use simple pointer arithmetic or index directly into the buffer to
access individual elements of the buffer/array.

Additional code cleanups were done near areas affected by this change.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: split capabilities discovering

Using the new ice_aq_list_caps and ice_parse_(dev|func)_caps functions,
replace ice_discover_caps with two functions that each take a pointer to
the dev_caps and func_caps structures respectively.

This makes the side effect of updating the hw->dev_caps and
hw->func_caps obvious from reading the implementation of the function.
Additionally, it opens the way for enabling reading of device
capabilities outside of the initialization flow. By passing in
a pointer, another caller will be able to read the capabilities without
modifying the hw capabilities structures.

As there are no other callers, it is safe to now remove
ice_aq_discover_caps and ice_parse_caps.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: handle error gracefully in HW table calloc

In the ice_init_hw_tbls API, if the ice_calloc for es->written
fails, catch that error and bail out gracefully, instead of
continuing with a NULL pointer.

Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/bnxt: improve vector Tx

Improve performance of vector burst transmit function by processing
multiple packets per inner loop iteration.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: handle multiple packets per loop in vector Rx

Process four receive descriptors per inner loop in vector mode
burst receive functions.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: optimize vector path mbuf allocation

Simplify and optimize receive mbuf allocation function used
by the vector mode PMDs.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use table based mbuf flags handling

Use table to translate receive descriptor status flags to
rte_mbuf ol_flags values.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use table based packet type translation

Use table-based method for translating receive packet descriptor
flags into rte_mbuf packet type values.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: increase max burst size for vector path

Increase the maximum supported burst size for the bnxt vector
mode PMD from 32 to 64.

With larger burst sizes, per-burst overhead is amortized over more
packets, improving overall performance. For small packets this has
been measured to provide a 4-10% increase in single-core throughput
with testpmd iofwd.

Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: reduce CQ queue size without aggregation ring

Don't allocate extra completion queue entries for aggregation
ring when aggregation ring will not be used.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: improve small ring sizes support

Improve support for small ring sizes:
   - Ensure that transmit free threshold is no more than 1/4 ring size.
   - Ensure that receive free threshold is no more than 1/4 ring size.
   - Validate requested ring sizes against minimum supported size.
   - Use rxq receive free threshold instead of fixed maximum burst
     size to trigger bulk receive buffer allocation.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: require async completion ring for vector path

Disable support for vector mode when async completions can be placed
in a receive completion ring and change the default for all platforms
to use a dedicated async completion ring.

Simplify completion handling in vector mode receive paths now that
it no longer needs to handle async completions.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use appropriate type for Rx ring

Change the type of the software receive mbuf ring from an array
of structures containing an mbuf pointer to an array of pointers
to struct rte_mbuf for consistency with how this ring is currently
used by the vector mode receive function.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix getting burst mode for Arm

Transmit and receive burst mode get operations incorrectly return
"Vector SSE" on ARM64 platforms, change to return "Vector Neon"
instead.

Fixes: 398358341419 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix freeing mbuf

We should use rte_pktmbuf_free() instead of rte_free() to free the mbuf.

Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove logically dead code

This patch removes logically dead code reported by coverity.

Coverity issue: 360824
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/iavf: fix command after PF reset

If PF reset is finished but VF reset is pending, VF should no need to
send any invalid cmd to PF. That would avoid mass unexpected behaviors
affecting the robust.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Fixes: 9e03acd726cf ("net/iavf: fix flow access")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

common/iavf: add IPv6 prefix protocol header fields

Some IPv6 prefix related protocol header fields are defined in this
patch, so that we can use prefix instead of full IPv6 address for RSS.
Ref https://tools.ietf.org/html/rfc6052.

Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: support GTPC

Add GTPC header and its field selector.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: save max MTU received from PF

Most values from the VIRTCHNL_OP_GET_VF_RESOURCES are stored in the
iavf_hw_capabilities structure. Unfortunately, it seems that
max_mtu was missed. Add this member to the structure and save it when
parsing hw config.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: cleanup virtual channel code

1. use BIT to replace <<
2. move VIRTCHNL_VF_CAP_DCF to keep order
3. align the vc msg validate

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: use pad byte to specify MAC type

Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.

Below are the values that should be used by all VF drivers going
forward.

VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
  drivers that don't support the new type bits). The PF drivers
  will track VF's device/primary unicast MAC using with best
  effort.

VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
  device/primary unicast MAC. It should be used for both delete
  and add cases related to the device/primary unicast MAC.

VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
  MAC addresses that are not the device/primary unicast MAC. For
  example, extra unicast addresses and multicast addresses
  assuming the PF supports "extra" addresses at all.

If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/ice: fix firmware version output

Kernel driver shows firmware version as hex but ice PMD shows
as decimal. This patch fixes the issue to make consistent with
kernel driver.

Fixes: f9204d8a23c3 ("net/ice: fix firmware version result of ethtool")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/netvsc: replace compiler builtin overflow check

'__builtin_add_overflow' added to gcc in version 5, earlier versions
causing build error, like gcc 4.8.5 in RHEL7.

Replaced compiler builtin check with arithmetic check.

Fixes: 7838d3a6ae7a ("net/netvsc: check for overflow on packet info from host")

Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Tested-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

app/testpmd: count empty polls in 5-tuple swap engine

Enable empty polls in burst stats within 5tswap.c

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: enable burst stats for noisy VNF mode

Add burst stats for noisy VNF mode.

Fixes: 3c156061b938 ("app/testpmd: add noisy neighbour forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-burst-stats runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-core-cycles runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: remove underscore prefix from internal API

'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.

For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: use hairpin helper functions

Hairpin helper functions were not used by drivers, but it was used only
local to ethdev. They are:
'rte_eth_dev_is_rx_hairpin_queue()'
'rte_eth_dev_is_tx_hairpin_queue()'

Exposing them as internal APIs and update mlx5 driver (only user of
hairpin) to use them.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: mark internal functions

Some ethdev functions are for drivers only, not for applications.

Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.

Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: make device operations struct private

Hiding the 'struct eth_dev_ops' from applications.

Removing relevant deprecation notice.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: move inline device operations

This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.

Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.

Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.

To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.

The list of dev_ops moved:
eth_rx_queue_count_t       rx_queue_count;
eth_rx_descriptor_done_t   rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: deprecate descriptor status check API

Marking 'rte_eth_rx_descriptor_done()' API as deprecated.
``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.

Plan is to remove the API on 21.11 release.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: remove redundant license text

Redundant BSD-3 license text removed, the licensing already documented
by "SPDX-License-Identifier: BSD-3-Clause" SPDX tag.

Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: mark all traffic manager API as experimental

This patch marks all traffic manager API as experimental as
per deprecation notice[1] and discussion[2] mentioned in following
threads.

[1] https://mails.dpdk.org/archives/dev/2020-May/166221.html
[2] https://mails.dpdk.org/archives/dev/2020-April/165364.html

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: share Rx queue drop action code

Move Rx queue drop action similar resources allocations from Verbs
module to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue drop

Separate Rx queue drop creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx hash queue code

Move Rx hash queue object similar resources allocations from DevX and
Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue indirection table code

Move Rx indirection table object similar resources allocations from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: remove indirection table type field

Once the separation between Verbs and DevX is done using function
pointers, the type field of the indirection table structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx hash queue creation

Separate Rx hash queue creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx indirection table object creation

Separate Rx indirection table object creation into both Verbs and DevX
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue object modification

Use new modify_wq functions for Rx object creation in DevX and Verbs
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue object modification

Separate Rx object modification to the Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of WQ and CQ object

Rearrangement of WQ and CQ creation for Verbs Rx queue:
1. Rename the allocation function.
2. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of RQ and CQ resources

Rearrangement of RQ and CQ resource handling for DevX Rx queue:
1. Rename the allocation function so that it is understood that it
allocates all resources and not just the CQ or RQ.
2. Move the allocation and release of the doorbell into creation and
release functions.
3. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx control code

Move Rx object similar resources allocations and debug logs from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx interrupt handling

Separate interrupt event handler into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>