net/bnxt: fix default timeout for getting FW version

Initially when driver is loading, there is no HWRM timeout configured
by FW, the VER_GET command needs use default timeout as 500ms and
while recovering from fatal/non-fatal FW error, it should use timeout
as 50ms.

Fixes: 458f0360e8dc ("net/bnxt: get default HWRM command timeout from FW")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: fix unnecessary delay in port stop

VFs and multifunction PFs do not have the privilege to change
link configuration. We force the physical link down as a part
of device stop only for single physical function(SPF).

This change also helps in eliminating the logs when a VF port
is stopped:

"Port 0: link state change event"
"bnxt_print_link_info(): Port 0 Link Up - speed 25000 Mbps - full-duplex"

Fixes: 316e412299fd ("net/bnxt: fix crash when closing")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

drivers/crypto: fix session-less mode

When OpenSSL or AESNI-MB cryptodev is being used in sessionless mode
for symmetric crypto operation (e.g. SHA256 hash), the driver prints
error message:

    CRYPTODEV: set_sym_session_private_data() line 489:
               Set private data for driver 0 not allowed

Then, AESNI-MB driver segfaults in post_process_mb_job().

Bugzilla ID: 377
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Fixes: c68d7aa354 ("crypto/aesni_mb: use architecture independent macros")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>

test/crypto: add CPU crypto mode cases

This patch adds ability to run unit tests in cpu crypto mode for AESNI
GCM cryptodev.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

examples/ipsec-secgw: add missing SPDX license tag

Add missing BSD-3 license tag to inline fallback testing scripts.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

doc: add cycle-count mode in compression perf tool

This commit adds release notes and updates documentation for
the cycle-count mode added to the compression performance tool.

Fixes: 2695db95a147 ("test/compress: add cycle-count mode to perf tool")

Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>

test/compress: replace test vector

This patch replaces an existing test vector with a new one containing
public domain text only. This is to avoid any potential issues
re-licensing content as BSD-3 which has no clear original license.

Fixes: b06aa643cac4 ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>

doc: add missing release notes for QAT

Updated release notes for the changes done in QAT for DPDK 20.02
Original commits for these features are as follows.

Fixes: 026f21c0b951 ("common/qat: support dual threads for enqueue/dequeue")
Fixes: 6cde900bd59d ("common/qat: remove tail write coalescing")

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

cryptodev: fix doxygen of CPU crypto API

Add missing doxygen comment of rte_crypto_mbuf_to_vec's fields.

Fixes: 7adf992fb9bf ("cryptodev: introduce CPU crypto API")

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

crypto/ccp: fix queue alignment

Caught by compiling with -fno-common.
A ____cacheline_aligned symbol can be found in the crypto/ccp driver
object files.

Looking at this driver source, the ____cacheline_aligned (kernel?)
alignment macro is undefined.
The compiler treats this as a symbol definition and generates a global
symbol.

Fixes: ef4b04f87fa6 ("crypto/ccp: support device init")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>

crypto/octeontx2: add kmod dependency info

Like for OCTEON TX, the OCTEON TX2 crypto engines must
first be unbound from their kernel module, then rebound to
vfio-pci, before being used in DPDK.

As this capability is detected at runtime by dpdk-pmdinfo,
add the info in the PMD registering directives.

Then an external script can be used for bind and unbind.

Fixes: 2f8a1b963eb77 ("crypto/octeontx2: add PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

lib: fix unnecessary double negation

An equality expression already returns either 0 or 1.
There is no need to use double negation for these cases.

Fixes: ea672a8b1655 ("mbuf: remove the rte_pktmbuf structure")
Fixes: a0fd91cefcc0 ("mempool: rename functions with confusing names")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

examples/fips_validation: fix AES-GCM cipher length parsing

This patch fixes the cipher len keyword typo.

Fixes: 07f5e4553293 ("examples/fips_validation: fix cipher length for AES-GCM")

Suggested-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>

examples/l3fwd-power: fix interrupt disable

Since all related queues' interrupts are turned on before epoll, we need
to turn off all the interrupts after wakeup. This patch fixes the issue
of only turning off the interrupted queues.

Fixes: b736d64787fc ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Liang Ma <liang.j.ma@intel.com>
Tested-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

examples/l3fwd-power: fix a typo

Fixes: aee3bc79cc34 ("examples/l3fwd-power: enable one-shot Rx interrupt and polling switch")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

kni: fix not contiguous FIFO

KNI requires FIFO to be physically contiguous, with existing
'rte_memzone_reserve()' API this is not guaranteed by default and as a
result KNI rings and packet delivery may be broken if reserved memory
is not physically contiguous.

Fixing it by providing 'RTE_MEMZONE_IOVA_CONTIG' flag to ask physically
contiguous memory.

Bugzilla ID: 389
Fixes: 23fa86e529e4 ("memzone: enable IOVA-contiguous reserving")
Cc: stable@dpdk.org
Signed-off-by: Scott Wasson <scott_wasson@affirmednetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: remove major in designation of normal releases

The word "major" was used to differentiate with release candidates
or stable maintenance releases.
However the word "major" can be understood as "LTS",
so it is less confusing to avoid this word.

Reported-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>

fix Mellanox copyright and SPDX tag

Mellanox owns Tilera and EZchip, so the copyrights can be converted.
At the same time, the license header is switched to SPDX tag format,
and a typo is fixed in another copyright line.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

examples/kni: add SIGTERM signal handling

SIGTERM handling is added for graceful application exit.
Useful when application is terminated without specifying
any signal on 'kill' command.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

kni: fix build with Linux 5.6

With the following Linux commit a new parameter 'txqueue' has been added
to 'ndo_tx_timeout' ndo:
commit 0290bd291cc0 ("netdev: pass the stuck queue to the timeout handler")

The change reflected to the KNI with version check.

Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>

examples/power: fix ack for enable/disable turbo

When a VM sends a command through virtio-serial to enable/disable
turbo, it is successfully enabled or disabled, yet the response to the
VM is NACK. This is because all the library frequency change APIs return
1 for success (change in frequency), 0 for success (no change in
frequency) and -1 for failure. However the turbo enable/disable APIs just
return 0 for success and -1 for failure.

Fix the handling of the return code to treat ">= 0" as success, and
send an ACK. Only send NACK when < 0 (failure).

Fixes: 0de94bcac7fc ("examples/vm_power: send confirmation cmd to guest")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Lei Yao <lei.a.yao@intel.com>

examples/ioat: fix invalid link status check

The return value of the get link function call was not checked, and
could return a negative value indicating a failure. This meant the
link_status of the link being checked is invalid, because the link was
not filled with data. The return value is now checked, and if the return
value is not 0 for success, the loop continues with the next port.

To avoid confusion between variable names, the existing retval variable
is renamed to link_status, to better represent its use.

Coverity issue: 350348
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

examples/ioat: fix failure check for ioat dequeue

The nb_dq return value from the ioat dequeue is negative in failure
cases, however the variable was an unsigned int, causing the condition
where nb_dq <= 0 to never be true. This is now cast to a signed int,
which will successfully reflect the -1 value to be used in this
conditional check.

Coverity issue: 350342
Coverity issue: 350349
Fixes: 92c981637ffc ("examples/ioat: handle failure case for ioat dequeue")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

examples/ioat: fix unchecked return value

patch checks the return value of function rte_eth_dev_info_get,
if return value is negative error message printed on the console.

Coverity issue: 350361
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

examples/ethtool: fix unchecked return value

This checks the return value from the function
rte_eth_dev_set_vlan_offload.

Coverity issue: 350358
Fixes: bda68ab9d1e7 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Gargi Sau <gargi.sau@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

test/acl: add 32-bit range test case

Add new test-case to improve test coverage for 32-bit range fields.

Suggested-by: Ido Goshen <ido@cgstowernetworks.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

acl: fix 32-bit match for range field

ACL build phase for range fields that are bigger then
16 bits might generate wrong trie.
For more details please refer to:
https://bugs.dpdk.org/show_bug.cgi?id=307

Bugzilla ID: 307
Fixes: dc276b5780c2 ("acl: new library")
Cc: stable@dpdk.org
Reported-by: Ido Goshen <ido@cgstowernetworks.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

eal/windows: support command line options parsing

Adding specific logic for eal.c to support parsing on
Windows.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/windows: support more common files

Added support for additional common files in meson build
to expand Windows EAL and to support the lcore parsing
feature on Windows.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal: disable syslog and dlopen on Windows

Excluding syslog/ dlfcn definitions and parameters
from Windows by adding #ifndef RTE_EXEC_ENV_WINDOWS.

Note: This is a temporary change. In future, separate
'unix' directory will be created for unix specific functions.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/x86: include SSE4 support on Windows

Modified common/include/arch/x86/rte_vect.h
to include SSE4 header for Windows.

Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/windows: detect process type

Adding a function to detect process type, also included
header files to contain suitable function declarations
and to support extra warning flags.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/windows: add getopt implementation

Adding getopt files to support parsing option on
Windows.

The original contribution is under BSD-2 license.
https://github.com/greenplum-db/libusual/blob/master/usual/getopt.c
https://github.com/greenplum-db/libusual/blob/master/usual/getopt.h

Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/windows: add some basic functions and macros

Adding additional function definitions for pthread, cpuset
implementation, asprintf implementation, in order to support
common code.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

eal/windows: add dirent implementation

Adding dirent.h on Windows to support common code.
eal_common_options.c includes this file.

The original contribution is under MIT license.
https://github.com/tronkko/dirent

Signed-off-by: Antara Ganesh Kolar <antara.ganesh.kolar@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>
Acked-by: Narcisa Ana Maria Vasile <narcisa.vasile@microsoft.com>

license: add exceptions for Windows

The Governing Board and Tech Board have provided exceptions for
MIT and BSD-2-Clause license files for DPDK support on Windows.

Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

devtools: enable more config options in build test

The Linux kernel modules kni and igb_uio were disabled by default
so they need a new option (+kmods) for testing compilation.

Some recent features were not enabled in compilation testing:
- mlx5 vDPA (depends on libibverbs)
- ifpga (depends on libfdt)
- ipn3ke (depends on libfdt)
- Arm WFE

Check on libfdt availability is added, and not considered as a fix.

Fixes: 91a861e54164 ("config: disable Linux kernel modules by default")
Fixes: 95276abaaf0a ("vdpa/mlx5: introduce Mellanox vDPA driver")
Fixes: 1be7855d7739 ("eal: add wait until equal API")

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>

config: deduplicate options

Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>

vdpa/mlx5: fix ABI version

Changed the ABI version to 20.0.1.

Fixes: 95276abaaf0a ("vdpa/mlx5: introduce Mellanox vDPA driver")

Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

common/mlx5: fix ABI version

Changed the ABI version to 20.0.1.

Fixes: 7b4f1e6bd367 ("common/mlx5: introduce common library")

Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

build: remove redundant config include

The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

raw/octeontx2_ep: fix ABI version

Changed the ABI version to 20.0.1.

Fixes: 56d46d13f736 ("raw/octeontx2_ep: add build infra and device probe")

Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

common/octeontx2: fix 20.02 new symbols ABI version

Move symbols added in 20.02 release to DPDK_20.0.1 ABI.

Fixes: d06551535a09 ("common/octeontx2: add security capability routine")
Fixes: 3fe4d07d1678 ("crypto/octeontx2: enable CPT to share QP with ethdev")
Fixes: f44e71637755 ("net/octeontx2: add security session operations")

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

version: 20.02-rc2

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

raw/octeontx2_ep: fix error handling

Defects reported by coverity scan are resolved.

Coverity issue: 353611, 353622, 353632
Fixes: 81fd15a2acc2 ("raw/octeontx2_ep: add device configuration")
Fixes: b848f0416acb ("raw/octeontx2_ep: add dequeue operation")

Signed-off-by: Mahipal Challa <mchalla@marvell.com>

common/octeontx2: add polling based response mbox message

Currently otx2_mbox_get_rsp_xxx get response once AF driver
interrupts after completion. But this function will get into
deadlock if called in another interrupt context.

To avoid it, implemented another version of this function which polls
on dedicated memory for a given timeout.

Also after clearing interrupt, there could UP messages available for
processing. So irq handler must check mbox messages.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

eal: check if running in interrupt context

Added an API to check if current execution is in interrupt
context. This will be helpful to handle nested interrupt cases.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>

fib: fix possible integer overflow

This commit fixes possible integer overflow for
prev_idx in build_common_root() CID 350596
and
tbl8_idx in write_edge() CID 350597

Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
overflow_before_widen: Potentially overflowing expression tbl8_idx * 256
with type int (32 bits, signed) is evaluated using 32-bit arithmetic,
and then used in a context that expects an expression of
type uint64_t (64 bits, unsigned).

Coverity issue: 350596, 350597
Fixes: c3e12e0f0354 ("fib: add dataplane algorithm for IPv6")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>

test/mbuf: check pinned external buffer

This patch adds unit test for the mbufs allocated from
the special pool with pinned external data buffers.

The pinned buffer mbufs are tested in the same way as
regular ones with taking into account some specifics
of cloning/attaching.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mbuf: fix pinned memory function style

Minor style issue is fixed.

Fixes: 6c8e50c2e549 ("mbuf: create pool with external memory buffers")

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mbuf: display more fields in dump

The rte_pktmbuf_dump should display offset, refcount, and vlan
info since these are often useful during debugging.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

mem: fix munmap in error unwind

The loop to unwind existing mmaps was only unmapping the
first segment and the error paths after mmap() were not
doing munmap of the current segment.

Fixes: 66cc45e293ed ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

config: add Broadcom Stingray for meson cross-compilation

Broadcom Stingray is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).

Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>

config: update Marvell ARMADA

disable more NXP modules that conflict with MUSDK

Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

ring: fix namespace prefix of inline functions

When adding custom element size feature, some internal inline functions
were added in a public header without rte_ prefix.
It is fixed by adding __rte_ring_.

Fixes: cc4b218790f6 ("ring: support configurable element size")

Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

app/pdump: fix build with clang

Clang checks indentation and found incorrect indentation in pdump.

app/pdump/main.c:598:3: error: misleading indentation;
statement is not part of the previous 'if'
[-Werror,-Wmisleading-indentation]

Fixes: caa7028276b8 ("app/pdump: add tool for packet capturing")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

bpf: fix headers install with meson

Previously, when librte_bpf is built with meson+ninja, its
headers such as bpf_def is not installed to the system.
This commit fixes this problem.

Fixes: 94972f35a02e ("bpf: add BPF loading and execution framework")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

build: allow using wildcards to disable drivers

Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.

    meson -Ddisable_drivers=crypto/*,event/* build

to do a build omitting all the crypto and event drivers. Explicitly
specified drivers e.g. net/i40e, work as before, and can be mixed with
wildcarded drivers as required.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Luca Boccassi <bluca@debian.org>

build: remove some icc warnings

While icc builds without the "werror" setting build successfully, there are
a lot of warnings. To make the output cleaner, and to allow building with
warnings enabled, we can add a list of warning ids to ignore.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

net/octeontx2: check compiler flag before use

Rather than assuming all compilers support the -flax-vector-extensions
flag, we should test this before using it, thereby potentially avoiding
warnings.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

mk: ignore missing field initializers warning

Three warnings are commonly disabled in DPDK with make and meson:
* address-of-packed-member
always disabled
* missing-field-initializers
disabled with meson
disabled with make + clang or make + gcc < 4.7
disabled with make + gcc <= 5 for test files and event drivers
* packed-not-aligned
disabled with meson

This change is removing exceptions for missing-field-initializers.
As it is always disabled, some redundant configs are cleaned up.

Now the situation is:
* address-of-packed-member
always disabled
* missing-field-initializers
always disabled
* packed-not-aligned
disabled with meson

It could alternatively be decided to disable missing-field-initializers
only for old gcc (< 6).

The warning packed-not-aligned is not modified in this change.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

common/cpt: remove self assignment

This fixes coverity issue of self assignment.

Coverity issue: 353635
Fixes: 99faef832563 ("crypto/octeontx: support ECPM")

Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>

common/cpt: fix component for empty IOV buffer

fill_sg_comp_from_iov() prepares gather components for i/p IOV
buffers and extra buf. This API is failing to create a gather component
for extra_buf when IOV buf len is zero. Though there is enough space
to accommodate extra_buf, because of pre-decrementing of extra_buf
length from aggregate size, this issue is seen.

Fixes: b74652f3a91f ("common/cpt: add microcode interface for encryption")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>

common/cpt: check cipher and auth keys are set

Returning error when cipher and auth key are not getting set

Fixes: 6cc54096520d ("crypto/octeontx: add supported sessions")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>

common/cpt: support variable key size for HMAC

HMAC algorithms supports key lengths from 1 to 1024 bytes.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>

crypto/octeontx2: extend AES-GCM capabilities

OCTEON TX2 crypto PMD supports digest lengths from 4 to 16 bytes
with new firmware.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>

common/cpt: remove redundant bitswaps

The structures can be written for direct h/w usage to avoid multiple
bitswaps.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>

examples/ipsec-secgw: test CPU crypto

Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

examples/ipsec-secgw: support CPU crypto

Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.

Legacy mode is not currently supported.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

ipsec: support CPU crypto mode

Update library to handle CPU cypto security mode which utilizes
cryptodev's synchronous, CPU accelerated crypto operations.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

security: add CPU crypto action type

Introduce CPU crypto action type allowing to differentiate between
regular async 'none security' and synchronous, CPU crypto accelerated
sessions.

This mode is similar to ACTION_TYPE_NONE but crypto processing is
performed synchronously on a CPU.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/aesni_gcm: support CPU crypto

Add support for CPU crypto mode by introducing required handler.
Authenticated encryption and decryption are supported with tag
generation/verification.

CPU crypto support include both AES-GCM and GMAC algorithms.

Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

cryptodev: introduce CPU crypto API

Add new API allowing to process crypto operations in a synchronous
manner. Operations are performed on a set of SG arrays.

Cryptodevs which allows CPU crypto operation mode have to
use RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO capability.

Add a helper method to easily convert mbufs to a SGL form.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

examples/fips_validation: support AES XTS

AES XTS support is added to fips application. Parse test-vectors
from input files, populate AES XTS tests and prepare AES XTS
operations for fips validation.

Signed-off-by: Abed Kamaluddin <akamaluddin@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>

examples/fips_validation: fix cipher length for AES-GCM

Cipher length need to be updated in case of AES-GCM decryption.

Fixes: 4aaad2995e13 ("examples/fips_validation: support GCM parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

net/octeontx2: sync inline tag type

Tag type configuration for the inline processed packets is set during
ethdev configuration, it might conflict with tag type configuration
done during Rx adapter configuration which would be setup later.

This conflict is fixed as part of flow rule creation by updating
tag type config of inline same as Rx adapter configured tag type.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add inline IPsec Tx

Adding pre-processing required for inline IPsec outbound packets.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add security in Tx

Added new flag for SECURITY in compiler optimized Tx fastpath
framework. With this, compiler autogenerates functions which
have security enabled.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>

net/octeontx2: add security in Rx

Added new flag for SECURITY in Rx compiler optimized fastpath
framework. With this, compiler autogenerates functions which
have security enabled.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add inline IPsec Rx

Adding post-processing required for inline IPsec inbound packets.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add lookup mem changes to hold SA indices

lookup_mem provides fast accessing of data path fields.
Storing sa indices in lookup_mem which are required in
inline rx data path.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add datapath ops in security context

Adding data path ops in eth security ctx.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add security session operations

Adding security session operations in eth security ctx.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/octeontx2: enable CPT to share QP with ethdev

Adding the infrastructure to save one opaque pointer in idev and
implement the consumer-producer in the PMDs which uses it accordingly.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add security capabilities

Adding security capabilities supported by the eth PMD.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: add security in configure

Adding security in eth device configure.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

net/octeontx2: create security context

Adding security ctx to the eth device.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/octeontx2: configure for inline IPsec

For enabling outbound inline IPsec, a CPT queue needs to be tied
to a NIX PF_FUNC. Distribute CPT queues fairly among all available
otx2 eth ports.

For inbound, one CPT LF will be assigned and initialized by kernel.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

common/octeontx2: add security capability routine

This routine returns true if given rte_eth_dev is security offload
capable and belongs to octeontx2.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

common/octeontx2: add CPT LF mbox for inline inbound

Adding the new mbox introduced to configure CPT LF to be used for inline
inbound.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

examples/ipsec-secgw: set and use packet type

Set mbuf ptype in prepare_one_packet() after parsing ether_type.
Use mbuf ptype after to recognize packet's address family.

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

examples/ipsec-secgw: add SAD cache

Introduce SAD cache.
Stores the most recent SA in a per lcore cache.
Cache represents flat array containing SA's indexed by SPI.

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

examples/ipsec-secgw: get rid of maximum SP limitation

Get rid of maximum SP limitation.
Keep parsed SP's into the sorted by SPI value array.
Use binary search in the sorted SP array to find appropriate SP
for a given SPI.

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

examples/ipsec-secgw: get rid of maximum SA limitation

Get rid of maximum SA limitation.
Keep parsed SA's into the sorted by SPI value array.
Use binary search in the sorted SA array to find appropriate SA
for a given SPI.

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

examples/ipsec-secgw: integrate inbound SAD

Integrate ipsec SAD support into secgw app:

1. Use SAD library for inbound SA lookup
2. Changes in struct sa_ctx:
  - sa array allocates dynamically depending on number of configured sa
  - All SA's are kept one by one without using SPI2IDX
3. SP's userdata now contain index of SA in sa_ctx instead of SPI
4. Get rid of SPI2IDX macro

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

examples/ipsec-secgw: implement inbound SAD

Add initial support for librte_ipsec SAD library

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

ipsec: move SAD name length

Move IPSEC_SAD_NAMESIZE into public header
and rename it to RTE_IPSEC_SAD_NAMESIZE

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

crypto/dpaa_sec: reorganize structure members

This patch reorganize the members of a structure
used by driver in its data-path to improve
performance.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/dpaa_sec: fix IOVA conversions

DPAA sec driver is using virtual to physical address
translation in its data path and driver is using
dpaax_iova_table_update() API in every address translation
which is very costly.
This patch moves dpaax_iova_table_update() calling to rte_dpaa_mem_ptov(),
only if it fails to found translation from DPAAX table.

Fixes: 12e5842945bf ("crypto/dpaa_sec: fix IOVA table")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/ccp: support V1000/R1000

Add a new CCP PCI device ID for supporting V1000/R1000 processors.

Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>