net/ice/base: fix MAC write command

The manage MAC write command was implemented in an overly complex way
that actually didn't work, as it wasn't symmetric to the manage MAC
read command, and was feeding bytes out of order to the firmware. Fix
the implementation by just using a simple array to represent the MAC
address when it is being written via firmware command.

Fixes: a90fae1d0755 ("net/ice/base: add admin queue structures and commands")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: check DDP package compatibility

Check the OS and NVM package versions before downloading the package.
If the OS package version is not compatible with NVM then return an
appropriate error.

Split the 32-byte segment name into a 28-byte segment name and
a 4-byte Track-ID. Older packages will still work with this change
because no package has a name that will take up more than 28 bytes;
in this case the Track-ID will be 0.

Note that the driver will store the segment name as 32-bytes in the
ice_hw structure, in order to normalize the length of the various
package name strings that it uses.

Also add section ID and structure for the segment metadata section.

Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: discover and store size of available flash

When reading from the NVM using a flat address, it is useful to know the
upper bound on the size of the flash contents. This value is not stored
within the NVM.

We can determine the size by performing a bisection between upper and
lower bounds. It is known that the size cannot exceed 16 MB (offset of
0xFFFFFF).

Use a while loop to bisect the upper and lower bounds by reading one
byte at a time. On a failed read, lower the maximum bound. On
a successful read, increase the lower bound.

Save this as the flash_size in the ice_nvm_info structure that contains
data related to the NVM.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move functions from common to NVM module

The ice_get_pfa_module_tlv and ice_read_pba_string functions primarily
deal with reading from the Shadow RAM portion of the NVM contents. As
these functions are NVM focused, move them into the ice_nvm.c file.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: do not access some hardware registers in DCF

DCF runs as a VF so it can't access PF registers. And export the filter
management list static functions as public for make DCF initialization.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add hook to send AdminQ command

Add the hook to send the PF's AdminQ command in another path, like not
directly to the firmware.

If the AdminQ command is sent through the hook path, it needs to save
the AQ error codes from firmware as the last status for admin control
queue, so that the AdminQ command function can use it to do exception
handling like the buffer size is not enough according to error ENOMEM.

And convert explicitly the hook path result to the ice_status type.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: update copyright date

Update copyright date to 2020.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add ACL module

Add all ACL related code.

Signed-off-by: Real Valiquette <real.valiquette@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: store NVM version in extracted format

Currently the NVM and Option ROM version information is stored in
a minimal format. The ice_get_nvm_version function exists to extract
this information for display.

This needlessly complicates using these fields as the extraction
function must be called to parse the NVM and Option ROM data. Further
confusion occurs because the prefix of "oem_" is used for the Option
ROM version. This appears to have been done because the Option ROM data
was requested for display by OEMs.

Refactor this code so that the NVM version and Option ROM version
components are extracted immediately.

Introduce a new struct ice_orom_info which will store the Option ROM
major, build, and patch numbers. Introduce the new major_ver and
minor_ver fields to store the NVM version in its high and low byte
components.

Remove the ice_get_nvm_version function. Instead, use the same logic to
convert the fields read from the NVM into the extracted format.

This simplifies use of these fields as they will be stored already
parsed, without needing to use the bit masks or call
ice_get_nvm_version.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support PHY persistent feature

In this patch, we will modify the ice_copy_phy_caps_to_cfg(...) function
to conditionally fill up the
ice_aqc_set_phy_cfg_data.module_compliance_enforcement with correct
value, based on the PHY persistent feature.

Apply the ice_copy_phy_caps_to_cfg() function inside ice_set_fc()

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix a couple of casting

Adjust variable size between u8 and u16 to fix casting issues
Also fix couple coding style issues

Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: implement new shadow RAM read

Remove the ice_read_sr_aq function and implement ice_read_sr_word_aq
directly in terms of the new ice_read_flat_nvm function. This simplifies
the code by reducing a now unnecessary reading function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add macro specifying max NVM offset

The ice_aq_read_nvm function uses a somewhat weird construction for
verifying that the incoming offset is valid. Replace this construction
with a simple greater-than expression, and define the maximum value
(24bits) in the ice_adminq_cmd.h

By providing a macro, the check becomes more clear. Additionally the
maximum offset can be used in other locations.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: extract logic of flat NVM read to function

The ice_read_sr_buf_aq function implements logic to correctly break
apart NVM reads into 4Kb chunks. Additionally, it ensures that each read
never crosses a Shadow RAM sector boundary. This logic is useful when
reading the flat NVM as a byte-addressable stream.

Extract that logic in terms of bytes and implement it as
ice_read_flat_nvm. Use this new function to implement ice_read_sr_buf_aq
function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add AN masks to get PHY capabilities

Adds masks indicating AN clauses to the Get PHY Capabilities
command. Changes the name of the low_power_ctrl field to be
properly descriptive of it being an AN field.

Signed-off-by: Lev Faerman <lev.faerman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add shared driver parameter command

Adds the Driver Shared Parameters (0x0C90) AQ command.

Signed-off-by: Lev Faerman <lev.faerman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add PHY number definition values

As title.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: capitalize abbreviations

Fix abbreviations as found by abbrevcheck

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add dedicate MAC type for E810

Add a new MAC type ICE_MAC_E810 to distinguish E810 devices from other
devices. MAC types for all other devices will be ICE_MAC_GENERIC till
there's a need to distinguish further between devices.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support link default override

Adds functions to check for link override firmware support and get
the override settings for a port. Link override allows a user to force
link settings that are not normally supported.

Firmware support is version dependent so a function to check support has
been added.

The link FC settings will use the override if available.

Signed-off-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support GTPU uplink and downlink

Enable GTPU uplink and downlink flag usage.
TCAM with different GTPU extend header flag can be separated.

Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: minor fixes

This is a collection of minor fixes that were found during code review.
Changes are:
- Call ice_hweight8() instead of calculating it ourselves in
  ice_bits_max_set().
- Call ice_test_and_clear_bit() over calling ice_is_bit_set() then
  ice_clear_bit() in ice_rem_vsi_rss_list().
- Remove 'chrs' variable in ice_add_prof_id_flow() as it's not being
  used for anything.
- Return result directly instead of assigning to variable then
  returning the variable in ice_rem_vsig().
- Reduce scope, and don't initialize, 'or_vsig' in
  ice_add_prof_id_flow().
- Return error immediately in ice_add_prof_id_vsig(). Since the memory
  wasn't allocated, there is no need to goto and attempt to free memory.
- Show that values 37-38 are reserved in ice_flow_avf_hdr_field as the
  other reserved values are shown.
- Fix RCT ordering
- Remove initialization of values that aren't needed
- Fix function headers to match function names
- Use offsetof instead of calculating ourselves in ice_pkg_buf_alloc()
- In ice_rem_prof(), do not set status to ICE_SUCCESS as, due to code
  flow, this will always be ICE_SUCCESS.
- Remove unnecessary semicolon in ice_prof_gen_key()
- Remove unnecessary initializations
- correct bw_alloc type in ice_sched_add_root_node

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add NVM netlist macros

As title, these macros are added for future use.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: refactor a function

Refactor function ice_prof_bld_xlt2, a switch statement is better suited
for this situation and eliminates the need for the "found" variable.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: use descriptive variable name than type

The variable name 'type' is not very descriptive. Replace instances of
those with a variable name that is more descriptive or replace it if not
needed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: use struct size helper

For structures using the common C "struct hack" technique to create a
flexible length structure member at the end of the structure, use the
ice_struct_size macro to determine the length of the structure instead
of open coding the calculation.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: replace u16 with enum

Use enum ice_flow_field directly so no need to be converted
from u16 for ice_flow_xtract_fld

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: allow VLAN and ethertype filter for port

Add new API function which allow user to choose port on which
VLAN and ethertype rule going to be added.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: read PSM clock frequency from register

Read the GLGEN_CLKSTAT_SRC register to determine which PSM clock
frequency is selected.  This ensures that the rate limiter profile
calculations will be correct.

Fixes: 453d087ccaff ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix removing MAC rule

Send correct recp_list to ice_remove_mac_rule. ICE_SW_LKUP_ETHERTYPE
rule list was sent instead of ICE_SW_LKUP_MAC. That caused problem
with adding new mac rule on VF, because rule wasn't removed correctly.

Fixes: c7dd15931183 ("net/ice/base: add virtual switch code")
Cc: stable@dpdk.org
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add and update E822 device IDs

Add the device IDs for the Intel(R) Ethernet Connection E822-L and
E822-X SKUs. Update the codenames and branding strings for the previous
C822N device IDs which should be using E822-C.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix uninitialized stack variables

Via code inspection, I found that some partially initialized
stack variables were being passed along to called functions,
which could eventually result in those uninitialized members
being used.  To fix this, make sure the local variables are
zeroed out before partially initializing them.  This should
prevent any unintended consequences from using stack memory that
might have junk in it.

In addition to the memsets, this patch also initializes one
member in one function, that needed to be initialized to non-zero.

Fixes: fed0c5ca5f19 ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/hns3: fix return value of setting VLAN offload

Currently, the '.vlan_offload_set' ops implementation function named
hns3vf_vlan_offload_set always return 0 in hns3 VF PMD driver.

This patch fixes it with the following modification in the function
named hns3vf_vlan_offload_set.
1. Avoid setting hardware configuration and return -EIO during resetting.
2. Add the return value detection process for calling internal static
   function named hns3vf_en_hw_strip_rxvtag.

Fixes: a5475d61fa34 ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix mailbox opcode data type

The mailbox opcode is defined as one byte in datasheet which is not
compatible with that in the current hns3 PMD driver.

This patch fixes the data type of the local variable for mailbox opcode
in driver, changing from uint16_t to uint8_t.

Fixes: 463e748964f5 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>

net/hns3: fix configuring RSS hash when rules are flushed

Currently, when performing test case as follow:
1. Run testpmd application based on hns3 network engine with multiple
   receive queues(--rxq=N --txq=N, N>1).
2. Create the special RSS rules by "create flow ..." command in the
   command prompt of the testpmd application.
3. Flush the RSS rules created in step 2 by "flow flush ..." command.
4. Enable RSS by "port config all rss all" command.
In step 4, the command exeuctes successfully. This phenomenon is
inconsistent with the expectation. The API function named
rte_eth_dev_rss_hash_update called in the command should return error
and the command should fail.

This patch fixes it by adding a flag for disabling RSS in the driver.
When RSS rules is flushed, we set the the flag with true, and the
'.rss_hash_update' ops implementation function named
hns3_dev_rss_hash_update return -EINVAL.

Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix RSS indirection table configuration

For the current hns3 PMD driver, there are some RSS related bugs at
the following scenes:
1. Start the application with the number of Rx queues equals 1(--rxq=1),
   modify the number of Rx queue to some number greater than 1 during
   normal operation. As a result, upper application can't receive packets
   from multiple rx queues.
2. Start testpmd application with the option disable-rss and the number
   of Rx queue is greater than 1(--disable-rss --rxq=N, N>1). As a result,
   upper application still can receive packets from multiple rx queues.

The root cause as below:
There are some error configuration in the RSS indirection table of hns3
network engine.

This patch fixes them with the following modification.
1. When RSS size is changed, we need to update RSS redirection table
   maintained by driver and configure them to hardware. Besides, during
   the entire reset process, we need to ensure that the RSS table
   information are not overwritten and configured directly to the hardware
   in the RESET_STAGE_RESTORE stage of the reset process.
2. When sarting testpmd application with the options disable-rss, it
   doesn't need to configure RSS redirection table to hardware.

Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

app/testpmd: add FW version in port info

rte_eth_dev_fw_version_get() was not called in test PMD.
Added rte_eth_dev_fw_version_get() in testpmd under
"show port info <port no>"

Bugzilla ID: 225

Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Muhammad Ahmad <muhammad.ahmad@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ipn3ke: use control thread to check link status

ipn3ke driver creates a thread to check link status.

Before this patch, pthread_create() is used to create
thread, leaving the new thread unrestrained wrt cpu
affinity.

After this patch, rte_ctrl_thread_create() is used to
create thread. The affinity of the new thread is based
on the CPU affinity retrieved at the time rte_eal_init()
was called, the dataplane and service lcores are then
excluded.

Fixes: 70d6b7f550f4 ("net/ipn3ke: add representor")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>

net/hinic: support flow control

The patch supports pause flow control, including getting or
setting rx_pasue, tx_pause and auto_neg, auto_neg is just
for Electric port type.

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: clean up logs

The patch optimizes log files without "\n".

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: add flow director filter

The patch supports filter type of inner VXLAN or non vxlan dport,
and use TCAM method to config these rules.

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: remove 40G mezzanine card

The 40GE Mezz card is not support, so remove it from the PMD driver.

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic/base: optimize doorbell area initialization

The maximum doorbell area is initialized from hardware param, and not
uses const macro param.

Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic/base: fix port start during FW hot update

When repeatedly hotupdate firmware and start/stop port at the same time,
port start may be failed when cmdq reinit failed at the FW active phase,
so if cmdq fails, then reinit the cmdq when port start.

Fixes: d9ce1917941c ("net/hinic/base: add hardware operation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hinic: fix LRO

PMD driver should change the max_lro_pkt_size parameter into lro_wqe_num
that used for hardware, and when packets are coalesced by hardware,
PKT_RX_LRO flag should be set in the RX mbuf.

Fixes: 9d4878ef0897 ("net/hinic: support LRO offload")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

net/hns3: fix status after repeated resets

Currently, when performing the following test case:
1. Run testpmd application based on hns3 PF device.
2. Inject reset(global/IMP reset) repeatedly.
After the reset, the network port can't link up.

In the RESET_STAGE_DEV_INIT stage of the reset process, the driver will
reinitialize the hardware. If global/IMP reset occurs at this time
again, the operation of reinitialize the hardware will fail because that
firmware don't respond to the configuration commands issued by driver.
In current driver, when failed to reinitialize the hardware, rollback
operation is done, such as clearing the relevant configuration of the
command queue registers.

If firmware detects that the function's command queue register is not
configured correctly, it will not complete the reset related hardware
configuration for this function, resulting in that driver can't detect
that the hardware reset has been completed. And then the reset process
of the driver exit abnormally, the hardware can not work normally after
reset.

This patch fixes it by avoid clearing the command queue related
registers when failed to reinitialize the hardware in the
RESET_STAGE_DEV_INIT stage of the reset process.

Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>

net/hns3: fix configuring illegal VLAN PVID

The VLAN pvid ranges from 0 to 4095. The hns3 PMD driver does not
support this situation that the VLAN pvid is larger than Maximum VLAN
ID(4095).

Fixes: 411d23b9eafb ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix crash when flushing RSS flow rules with FLR

Currently, we encounter segmentation fault when performing the following
test case:
1. Run testpmd application, config the flow filter rules then flush them
   repeatedly.
2. Inject FLR concurrently every 5 second.
The calltrace info:

This GDB was configured as "aarch64-linux-gnu".
Reading symbols from ./testpmd...(no debugging symbols found)...done.
[New LWP 322]
[New LWP 325]
[New LWP 324]
[New LWP 326]
[New LWP 323]
[New LWP 327]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/aarch64-linux-gnu/
libthread_db.so.1".
Core was generated by `/home/root/app/testpmd -w 0000:00:01.0 -w
0000:00:02.0 -w 0000:00:03.0 -l 0-3 -'.
Program terminated with signal SIGSEGV, Segmentation fault.
libc.so.6
[Current thread is 1 (Thread 0xffff8bb35110 (LWP 322))]
(gdb) bt
 #0  0x0000ffff8b936a90 in strlen () from /lib/aarch64-linux-gnu/
 libc.so.6
 #1  0x0000ffff8b905ccc in vfprintf () from /lib/aarch64-linux-gnu/
 libc.so.6
 #2  0x0000ffff8b993d04 in __printf_chk () from /lib/aarch64-linux-gnu/
 libc.so.6
 #3  0x0000000000754828 in port_flow_flush ()
 #4  0x0000000000870f3c in cmdline_parse ()

The root cause as follows：
In the '.flush' ops implementation function named hns3_flow_flush, By
the way the '.flush' ops is defined in the struct rte_flow_ops, if
failed to call hns3_clear_rss_filter, the out parameter error is not
set, and then the member variable name message in the struct error is
invalid(filled with 0x44444444 in port_flow_flush function of the
testpmd application), it leads to segmentation fault when format the
message.

We fixes it by filling error parameter when failure in calling static
function named hns3_clear_rss_filter in the the '.flush' ops
implementation function named hns3_flow_flush.

Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix default error code of command interface

Currently, the hns3 PMD driver can interact with firmware through
command to complete hardware configuration. The driver calls internal
interface function named hns3_cmd_send to issues command to the
firmware, and check the execution result of the command through desc_ret
returned by firmware to driver.

As the design of error code, when device is resetting hns3_cmd_send will
only return -EBUSY or -EIO. But we found that if desc_ret is in
[12,65535], for example the item doesn't exist when issuing the command
to query some table item, hns3_cmd_send also return -EIO. This
phenomenon will affect the processing logic for the return value.

The root cause as below:
When desc_ret is in [12,65535], in the static function named
hns3_cmd_convert_err_code called by hns3_cmd_send, matches the default
case and return -EIO. And then hns3_cmd_send return -EIO.

This patch fixes it with the following modification.
1. Change the return value of the default case in the static function
   named hns3_cmd_convert_err_code from -EIO to -EREMOTEIO.
2. Modify the comment add errcode description of the internal interface
   function named hns3_cmd_send.

Fixes: 737f30e1c3ab ("net/hns3: support command interface with firmware")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: fix packets offload features flags in Rx

Currently there is a certain probability of the unexpected ol_flag of
the Rx packets's rte_mbuf when receiving packets.

The root cause as below:
1. The member variable named ol_flag of the structure named rte_mbuf is
   not properly initialized to zero in the '.rx_pkt_burst' ops
   implementation function named hns3_recv_pkts.
2. When multi-segment rte_mbufs are needed for long packet in Rx
   operation, the driver should assign value to the ol_flag of the first
   segment, not to the ol_flag of the last segment.

This patch fixes it with the following modification in the
'.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
1. Where the first write operation in the '.rx_pkt_burst' ops
   implementation function, assign PKT_RX_RSS_HASH to ol_flags directly
   using '=' operation instead of '|=' operation.
2. In the static function named hns3_rx_set_cksum_flag, the last
   rte_mbuf's ol_flags should be assigned when processing multi-segment.
   We fix it by passing first_seg variable to the function instead of
   rxm(the last segment's address).

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Fixes: ad7cf94823e8 ("net/hns3: fix offload flag for RSS hash")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: modify inappropriate names

This patch modifies the name of some macro and local variable to avoid
devil number and increase code readability in the internal interface
function named hns3_set_port_vlan_filter.

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/hns3: remove redundant check when setting MAC

This patch removes unnecessary MAC address validity check operation in
the .mac_addr_set ops implementation function named
hns3_set_default_mac_addr and hns3vf_set_default_mac_addr, because it
has been guaranteed that input parameter named mac_addr is valid address
in the rte layer of DPDK framework.

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

doc: add trace library guide

Add programmer's guide for trace library support.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

mempool: add tracepoints

Add tracepoints at important and mandatory APIs for tracing support.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

cryptodev: add tracepoints

Add tracepoints at important and mandatory APIs for tracing support.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

eventdev: add tracepoints

Add tracepoints at important and mandatory APIs for tracing support.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: add tracepoints

Add tracepoints at important and mandatory APIs for tracing support.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

test/trace: add performance test cases

This test case shall be used to measure the trace overhead.

Example command to run the performance test case.

echo "trace_perf_autotest" | ./build/app/test/dpdk-test -c 0x3 --trace=.*

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

test/trace: add functional test cases

Example commands to run UT and check the traces with babeltrace viewer.

- Delete the existing /root/dpdk-traces/ directory if needed.
> sudo rm -rf /root/dpdk-traces/

- Start the dpdk-test
> sudo ./build/app/test/dpdk-test  -c 0x3 - --trace=.*

- Run trace_autotest
> trace_autotest

- View the traces with babletrace viewer.
> sudo babeltrace /root/dpdk-traces/

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add trace mode configuration parameter

Trace library exposes --trace-mode eal parameter to configure
event record mode when ring buffers are full.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add trace bufsize configuration parameter

Trace library exposes --trace-bufsz EAL parameter to configure
maximum size of ring buffer where events are to be stored.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add trace directory configuration parameter

Trace library exposes --trace-dir EAL parameter to configure
directory where traces will be generated.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add trace configuration parameter

Trace library exposes --trace EAL parameter to enable trace points.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add interrupt tracepoints

Add the following interrupt related tracepoints.

- rte_eal_trace_intr_callback_register()
- rte_eal_trace_intr_callback_unregister()
- rte_eal_trace_intr_enable()
- rte_eal_trace_intr_disable()

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add thread tracepoints

Add the following thread related tracepoints.

- rte_eal_trace_thread_remote_launch()
- rte_eal_trace_thread_lcore_ready()

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add memzone tracepoints

Add the following memzone related tracepoints.

- rte_eal_trace_memzone_reserve()
- rte_eal_trace_memzone_lookup()
- rte_eal_trace_memzone_free()

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add memory tracepoints

Add the following memory-related tracepoints.

- rte_eal_trace_mem_zmalloc()
- rte_eal_trace_mem_malloc()
- rte_eal_trace_mem_realloc()
- rte_eal_trace_mem_free()

rte_malloc() and rte_free() has been used in the trace implementation,
in order to avoid tracing implementation specific events, added
an internal no trace version rte_malloc() and rte_free().

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add alarm tracepoints

Add following alarm related trace points.

- rte_eal_trace_alarm_set()
- rte_eal_trace_alarm_cancel()

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add generic tracepoints

This patch creates the following generic tracepoint for
generic tracing when there is no dedicated tracepoint is
available.

- rte_eal_trace_generic_void()
- rte_eal_trace_generic_u64()
- rte_eal_trace_generic_u32()
- rte_eal_trace_generic_u16()
- rte_eal_trace_generic_u8()
- rte_eal_trace_generic_i64()
- rte_eal_trace_generic_i32()
- rte_eal_trace_generic_i16()
- rte_eal_trace_generic_i8()
- rte_eal_trace_generic_int()
- rte_eal_trace_generic_long()
- rte_eal_trace_generic_float()
- rte_eal_trace_generic_double()
- rte_eal_trace_generic_ptr()
- rte_eal_trace_generic_str()

For example, if an application wishes to emit an int datatype,
it can call rte_eal_trace_generic_int(val) to emit the trace.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: hook subsystem to FreeBSD

Connect the internal trace interface API to FreeBSD EAL.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: hook subsystem to Linux

Connect the internal trace interface API to Linux EAL.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement provider payload

The trace function payloads such as rte_trace_point_emit_* have
dual functions. The first to emit the payload for the registration
function and the second one to act as trace mem emitters a.k.a
provider payload.

When it is used as provider payload, those function copy the trace
field to trace memory based on the tracing mode.

Added payload definitions under ALLOW_EXPERIMENTAL_API define
to allow the existing applications to compile without enabling
experimental APIs.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement registration payload

The trace function payloads such as rte_trace_point_emit_* have
dual functions. The first to emit the payload for the registration
function and the second one to act as trace memory emitters.

When it is used as registration payload, it will do the following to
fulfill the registration job.
- Find out the size of the event,
- Generate metadata field string using __rte_trace_point_emit_field().

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement trace save

Implement rte_trace_save(), which will save the metadata
file and trace memory snapshot to the trace directory.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement debug dump

Implement rte_trace_metadata_dump() and rte_trace_dump()
functions. Former one used to dump the CTF metadata file and
the latter one to dump all the registered events and its status.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement memory allocation

Trace memory will be allocated per thread to enable lockless trace
events updates to the memory. The allocator will first attempt to
allocate from hugepage, then if not available from hugepage or
finally fallback to malloc memory.

Later in the patches series, this API will be hooked to DPDK fast path
and control plane thread creation API. It is possible for non
DPDK thread to use trace events. In that case, trace memory
will be allocated on the first event emission.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: handle CTF keyword collision

Some of the keyword like align, event, "." and "->" etc will be
used in CTF metadata syntax. This patch support for handling
those keywords with DPDK events name.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: create CTF TDSL metadata in memory

Common trace format(CTF) defines the metadata[1][2] for trace events,
This patch creates the metadata for the DPDK events in memory and
later this will be saved to trace directory on rte_trace_save()
invocation.

[1] https://diamon.org/ctf/#specification
[2] https://diamon.org/ctf/#examples

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: save bootup timestamp

Find epoch_sec, epoch_nsec and uptime_ticks time information
on eal_trace_init()/bootup to derive the time in the trace.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: add internal init and fini interface

Define eal_trace_init() and eal_trace_fini() EAL interface
functions that rte_eal_init() and rte_eal_cleanup() function can
use to initialize and finalize the trace subsystem.
eal_trace_init() function will add the following functionality if
trace is enabled through EAL command line param.

- Test for trace registration failure.
- Test for duplicate trace name registration.
- Generate UUID ver 4.
- Create a trace directory.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement operation APIs

This patch implements the following public trace APIs.

- rte_trace_is_enabled()
- rte_trace_mode_get()
- rte_trace_mode_set()
- rte_trace_pattern()
- rte_trace_point_disable()
- rte_trace_point_enable()
- rte_trace_point_is_enabled()
- rte_trace_point_lookup()
- rte_trace_regexp()

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: implement register API

The consumers of trace API defines the tracepoint and registers
to eal. Internally these tracepoints will be stored in STAILQ
for future use. This patch implements the tracepoint
registration function.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

trace: introduce new subsystem

Define the public API for trace support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the trace subsystem.

The 8 bytes tracepoint object is a global variable, and can be used in
fast path. Created a new __rte_trace_point section to store the
tracepoint objects as,
- It is a mostly read-only data and not to mix with other "write"
  global variables.
- Chances that the same subsystem fast path variables come in the same
  fast path cache line. i.e, it will enable a more predictable
  performance number from build to build.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

eal: introduce API for getting thread name

Introduce rte_thread_getname() API to get the thread name
and implement it for Linux and FreeBSD.

FreeBSD does not support getting the thread name.

One of the consumers of this API will be the trace subsystem where
it used as an informative purpose.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>

rcu: add additional debug logs

Added additional debug logs. These helped in debugging RCU defer APIs.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

doc: add RCU integration design details

Add a section to describe a design to integrate QSBR RCU library
with other libraries in DPDK.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

test/rcu: add defer queue APIs tests

Add test cases for RCU defer queue APIs.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

rcu: add resource reclamation APIs

Add resource reclamation using defer queues to make it simple for
applications and libraries to integrate rte_rcu library.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

doc: support IPsec Multi-buffer lib v0.54

Updated AESNI MB and AESNI GCM PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

crypto/qat: support plain SHA1..SHA512 hashes

This patch adds support for plain SHA-1, SHA-224, SHA-256,
SHA-384 and SHA-512 hashes to QAT PMD.

Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

test/crypto: do not check for PMD

Remove PMD bitmask, which selects the PMD to be tested
for each test case. Instead, all PMDs are eligible
to run all tests, and capability checking discards
the PMDs which do not support each test case.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test/crypto: check out-of-place support

Before running any out-of-place test cases,
check if device supports this mode.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test/crypto: check session-less support

Before running any sessionless test cases,
check if device supports this mode.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

cryptodev: add session-less feature flag

Add feature flag for symmetric sessionless support,
so it can be checked by applications.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test/crypto: do not check for internal PMD information

Now that capabilities are checked to see if an algorithm
is supported by a device, there is no need to check
for a specific version of a library used in a PMD.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

test/crypto: add capability check

Check if test case is supported by the crypto device,
including algorithm and some of its parameter, such as key length,
IV length, etc, using the capabilities API.
If it is not supported, test case is skipped.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

doc: add feature matrix table for bbdev

Adding missing overview page in documentation with
comparison of feature set by each available PMD implementation.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

baseband/fpga_5gnr_fec: support interrupt

Adding support for interrupt capability in the PMD
and the related operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

baseband/fpga_5gnr_fec: add HARQ loopback capability

Adding optional capability to support loopback preloading
and check of the extern HARQ memory.
This function is required to run the HARQ bit exact test successfully.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

baseband/fpga_5gnr_fec: add configure function

Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>