dpdk.git
6 years agopci: use z specifier to format size_t
Stephen Hemminger [Thu, 15 Feb 2018 22:25:49 +0000 (14:25 -0800)]
pci: use z specifier to format size_t

This addresses potential issues where size_t and off_t can vary
on some platforms.  For size_t the best way to format the value
is to use the z modifier to printf. For off_t need to cast to
long long to handle 64 bit offset on 32 bit platforms.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
6 years agoconfig: remove old log level option
Stephen Hemminger [Fri, 16 Feb 2018 20:02:39 +0000 (12:02 -0800)]
config: remove old log level option

The old RTE_LOG_LEVEL has been replaced by RTE_DP_LOG_LEVEL and
is not used anywhere in the current source tree.

It is a merge leftover.

Fixes: 43e9f17ce7b8 ("log: remove log level config option")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
6 years agodoc: update Marvell driver link
Jerin Jacob [Mon, 2 Apr 2018 07:51:47 +0000 (13:21 +0530)]
doc: update Marvell driver link

Change the incorrect driver documentation link to fix
following documentation build warning.

$ make doc-guides-html
sphinx processing guides-html...
doc/guides/rel_notes/release_17_11.rst:58:
WARNING: unknown document: ../nics/mrvl

Fixes: fe93968722af ("net/mrvl: rename PMD as mvpp2")

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agodevtools: do not create kernel dir
Pablo de Lara [Thu, 29 Mar 2018 10:36:45 +0000 (11:36 +0100)]
devtools: do not create kernel dir

get-maintainer script requires the creation of
some folders, including "kernel". Since now this folder
exists in DPDK folder, it is not required to create it.

Fixes: acaa9ee991b5 ("move kernel modules directories")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agoconfig: remove useless lines for DPAA2
Thomas Monjalon [Mon, 2 Apr 2018 21:49:55 +0000 (23:49 +0200)]
config: remove useless lines for DPAA2

Some comments are not relevant in a config which only overrides
the default config.

The option CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER is already disabled
by default so it can be removed from this file.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agocrypto/dpaa2_sec: support dynamic logging
Shreyansh Jain [Mon, 2 Apr 2018 14:06:01 +0000 (19:36 +0530)]
crypto/dpaa2_sec: support dynamic logging

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agocrypto/dpaa2_sec: fix debug logs
Shreyansh Jain [Mon, 2 Apr 2018 14:06:00 +0000 (19:36 +0530)]
crypto/dpaa2_sec: fix debug logs

Digest and IV length variable declarations have changed.
These were escaping builds as the debugging macro was disabled.
During dynamic logging change, they were discoverd.

Fixes: 0fbd75a99fc9 ("cryptodev: move IV parameters to session")
Fixes: 7f0034275a24 ("cryptodev: remove digest length from crypto op")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/fslmc: remove unused debug macros
Shreyansh Jain [Mon, 2 Apr 2018 14:05:59 +0000 (19:35 +0530)]
bus/fslmc: remove unused debug macros

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agoevent/dpaa2: support dynamic logging
Shreyansh Jain [Mon, 2 Apr 2018 14:05:58 +0000 (19:35 +0530)]
event/dpaa2: support dynamic logging

Some changes had already been pushed via SHA:72654f090a11 patch. This
patch updates them.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
6 years agonet/dpaa2: support dynamic logging
Shreyansh Jain [Mon, 2 Apr 2018 14:05:57 +0000 (19:35 +0530)]
net/dpaa2: support dynamic logging

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agomempool/dpaa2: support dynamic logging
Shreyansh Jain [Mon, 2 Apr 2018 14:05:56 +0000 (19:35 +0530)]
mempool/dpaa2: support dynamic logging

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/fslmc: support dynamic logging
Shreyansh Jain [Mon, 2 Apr 2018 14:05:55 +0000 (19:35 +0530)]
bus/fslmc: support dynamic logging

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agonet/i40e: remove unnecessary FDIR mask configuration
Beilei Xing [Thu, 29 Mar 2018 06:33:58 +0000 (14:33 +0800)]
net/i40e: remove unnecessary FDIR mask configuration

Remove unnecessary FDIR mask configuration, otherwise
flow directory mask will be changed when configuring
hash input set.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agovhost: avoid populate guest memory
Jianfeng Tan [Wed, 28 Mar 2018 06:56:07 +0000 (06:56 +0000)]
vhost: avoid populate guest memory

It's not necessary to populate guest memory from vhost side unless
zerocopy is enabled or users want better performance.

Update the doc for guest memory requirement clarification.

Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agovhost: add pipe event for optimizing negotiation
Tonghao Zhang [Wed, 28 Mar 2018 05:49:25 +0000 (22:49 -0700)]
vhost: add pipe event for optimizing negotiation

When vhost-user connects qemu successfully, dpdk will call
the vhost_user_add_connection to add unix socket fd to poll.
And fdset_add only set the socket fd to a fdentry while poll
may sleep now. In a general case, this is no problem. But if
we use hot update for vhost-user, most downtime of VMs network
is 750+ms. This patch adds pipe event, so after connections are
ok, dpdk rebuild the poll immediately. With this patch, the
most downtime is 20~30ms.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agovhost: move stdbool include
Tonghao Zhang [Wed, 28 Mar 2018 05:49:24 +0000 (22:49 -0700)]
vhost: move stdbool include

The vhost.h file uses bool type, but not include stdbool
header file. If other c files include vhost.h directly,
there will be a compile error.

This patch will be used in the next patch.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agovhost: add fdset-event thread name
Tonghao Zhang [Fri, 23 Mar 2018 02:18:51 +0000 (19:18 -0700)]
vhost: add fdset-event thread name

This patch adds the name for vhost fdset thread.
It can help us to know whether the thread is running.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
6 years agovhost: raise error on fdset-thread creation
Tonghao Zhang [Fri, 23 Mar 2018 02:18:50 +0000 (19:18 -0700)]
vhost: raise error on fdset-thread creation

When first call the 'rte_vhost_driver_start', the
fdset_event_dispatch thread should be created successfully.
Because the vhost uses it to poll socket events for vhost
server or clients. Without it, for example, vhost will not
get the connection event.

This patch returns err code directly when created not successful.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
6 years agonet/vhost: fix crash when creating vdev dynamically
Junjie Chen [Fri, 30 Mar 2018 06:58:31 +0000 (14:58 +0800)]
net/vhost: fix crash when creating vdev dynamically

When creating vdev dynamically, vhost pmd driver starts directly without
checking TX/RX queues are ready or not, and thus causes segmentation fault
when vhost library accesses queues. This patch adds a flag to check whether
queues are setup or not, and adds queues setup into dev_start function to
allow user to start them after setting up.

Fixes: aed0b12930b3 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agovhost: avoid concurrency when logging dirty pages
Maxime Coquelin [Wed, 21 Mar 2018 15:44:13 +0000 (16:44 +0100)]
vhost: avoid concurrency when logging dirty pages

This patch aims at fixing a migration performance regression
faced since atomic operation is used to log pages as dirty when
doing live migration.

Instead of setting a single bit by doing an atomic read-modify-write
operation to log a page as dirty, this patch write 0xFF to the
corresponding byte, and so logs 8 page as dirty.

The advantage is that it avoids concurrent atomic operations by
multiple PMD threads, the drawback is that some clean pages are
marked as dirty and so are transferred twice.

Fixes: 897f13a1f726 ("vhost: make page logging atomic")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
6 years agoethdev: fix port accessing after release
Matan Azrad [Wed, 28 Mar 2018 12:10:30 +0000 (12:10 +0000)]
ethdev: fix port accessing after release

rte_eth_dev_pci_release() function wrongly releases an ethdev port and
then releases internal fields of this port.
This behavior is problematic, because after the release, the port may
be reallocated again by another thread or just be invalid for any
usage.

Move the release operation to the end of the function.

Fixes: dcd5c8112bc3 ("ethdev: add PCI driver helpers")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
6 years agonet/qede: fix to prevent overwriting packet type
Harish Patil [Wed, 28 Mar 2018 00:15:55 +0000 (17:15 -0700)]
net/qede: fix to prevent overwriting packet type

Fixes: 3f72dd780e10 ("net/qede: check tunnel L3 header")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
6 years agonet/qede: fix device stop to remove primary MAC
Rasesh Mody [Wed, 28 Mar 2018 00:15:54 +0000 (17:15 -0700)]
net/qede: fix device stop to remove primary MAC

This fix is to remove primary MAC filter during dev stop. Without the
fix device start attempt to add the primary MAC fails. Perform MAC set
remove under IS_PF() check.

Fixes: dd28bc8c6ef4 ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/qede: add devargs to disable NPAR Tx switching
Rasesh Mody [Wed, 28 Mar 2018 00:15:53 +0000 (17:15 -0700)]
net/qede: add devargs to disable NPAR Tx switching

Added a run-time argument npar_tx_switching to enable/disable
Tx switching for multi-fucntion devices (NPAR).
Rename vf_txswitch option to vf_tx_switching.

Sample usage to disable Tx switching for NPAR or VF is something like...

 -w 05:00.0,npar_tx_switching=0 -w 05:00.1,npar_tx_switching=0
 -w 05:00.0,vf_tx_switching=0 -w 05:00.1,vf_tx_switching=0

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/qede: enable IPGRE offload support
Harish Patil [Wed, 28 Mar 2018 00:15:52 +0000 (17:15 -0700)]
net/qede: enable IPGRE offload support

Signed-off-by: Harish Patil <harish.patil@cavium.com>
6 years agonet/qede: convert to new Rx/Tx offloads API
Harish Patil [Wed, 28 Mar 2018 00:15:51 +0000 (17:15 -0700)]
net/qede: convert to new Rx/Tx offloads API

Ethdev RX/TX offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")

This patch makes use of new offload flags as suggested and fix
the default RX/TX configuration. Also indent the code properly
around those changes.

Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/mrvl: rename PMD as mvpp2
Natalie Samsonov [Mon, 26 Mar 2018 14:38:50 +0000 (16:38 +0200)]
net/mrvl: rename PMD as mvpp2

The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.

This patch doesn't introduce any change except renaming.

Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/sfc: support Medford2 family adapters
Andrew Rybchenko [Wed, 21 Mar 2018 13:51:32 +0000 (13:51 +0000)]
net/sfc: support Medford2 family adapters

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: support runtime VI window size
Andrew Rybchenko [Wed, 21 Mar 2018 13:51:31 +0000 (13:51 +0000)]
net/sfc: support runtime VI window size

Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: support link speeds up to 100G
Andrew Rybchenko [Wed, 21 Mar 2018 13:51:30 +0000 (13:51 +0000)]
net/sfc: support link speeds up to 100G

Add 25G, 50G and 100G.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/avf: fix link autoneg value
Ferruh Yigit [Fri, 9 Mar 2018 17:56:31 +0000 (17:56 +0000)]
net/avf: fix link autoneg value

Intention of the logic is:
If ETH_LINK_SPEED_FIXED is set in dev_conf, set link_autoneg to
ETH_LINK_FIXED, else set it to ETH_LINK_AUTONEG

ETH_LINK_SPEED_FIXED value is 1, and ETH_LINK_FIXED is 0;

Current logic is broken, fix it according above values.

Fixes: 48de41ca11f0 ("net/avf: enable link status update")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/i40e: fix support DDP packages group 0xff
Kirill Rybalchenko [Thu, 22 Feb 2018 18:01:39 +0000 (18:01 +0000)]
net/i40e: fix support DDP packages group 0xff

Group ID 0xFF indicates that packages does not change parser
graph so compatible with any other packages.

Fixes: b1ec717bfff5 ("net/i40e: fix multiple DDP packages conflict")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/i40e: add log when setting input set
Beilei Xing [Sun, 11 Feb 2018 06:55:50 +0000 (14:55 +0800)]
net/i40e: add log when setting input set

This patch adds log when setting input set since global
configuration is changed.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/ixgbe: fix intr callback unregister by adding retry
Yunjian Wang [Wed, 21 Mar 2018 12:28:10 +0000 (20:28 +0800)]
net/ixgbe: fix intr callback unregister by adding retry

The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.

Fixes: 2866c5f1b87e ("ixgbe: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agovhost: do not generate signal when sendmsg fails
Tiwei Bie [Tue, 6 Mar 2018 10:43:25 +0000 (18:43 +0800)]
vhost: do not generate signal when sendmsg fails

More precisely, do not generate a SIGPIPE signal if the peer
has closed the connection. Otherwise, it will terminate the
process by default. As a library, we should avoid terminating
the application process when error happens and just need to
return with an error.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agovhost: support sending fds via slave channel
Tiwei Bie [Tue, 6 Mar 2018 10:43:26 +0000 (18:43 +0800)]
vhost: support sending fds via slave channel

This function will be used to send fds to QEMU via slave channel.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agonet/virtio: add check for cvq
Zhiyong Yang [Wed, 21 Mar 2018 03:03:41 +0000 (11:03 +0800)]
net/virtio: add check for cvq

Add checking for cvq to judge if virtio_ack_link_announce should be called.
The existing code doesn't cause issue, and add the checking just to look
more reasonable.

Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agonet/virtio: fix queues pointer check
Zhiyong Yang [Wed, 21 Mar 2018 03:03:40 +0000 (11:03 +0800)]
net/virtio: fix queues pointer check

It is necessary to add pointer checking because in some case the
code will cause crash. For example, the code goes here before
memory allocation of rxvq is finished.

Fixes: 7365504f77e3 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
6 years agonet/virtio-user: specify MAC of the tap
Ning Li [Fri, 29 Dec 2017 03:38:42 +0000 (11:38 +0800)]
net/virtio-user: specify MAC of the tap

When using virtio-user with vhost-kernel to exchange
packet with kernel networking stack, application can
set the MAC of the tap interface via parameter.

Signed-off-by: Ning Li <muziding001@163.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
Tested-by: Seán Harte <seanbh@gmail.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
6 years agonet/cxgbe: convert to SPDX license tags
Rahul Lakkireddy [Sat, 10 Mar 2018 22:48:30 +0000 (04:18 +0530)]
net/cxgbe: convert to SPDX license tags

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
6 years agonet/cxgbe: support setting MAC address
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:27 +0000 (04:18 +0530)]
net/cxgbe: support setting MAC address

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: add VF port statistics
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:26 +0000 (04:18 +0530)]
net/cxgbe: add VF port statistics

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: update Tx and Rx path for VF
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:25 +0000 (04:18 +0530)]
net/cxgbe: update Tx and Rx path for VF

On TX path, add fw_eth_tx_pkt_vm_wr to transmit packets over VF.
Use is_pf4() to correctly calculate the work request size and
offsets within the work request.  On RX path, use pktshift to adjust
data offset within the mbuf.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: enable RSS for VF
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:24 +0000 (04:18 +0530)]
net/cxgbe: enable RSS for VF

Query firmware and configure RSS for VF.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: initialize SGE and queues for VF
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:23 +0000 (04:18 +0530)]
net/cxgbe: initialize SGE and queues for VF

Query firmware and initialize SGE parameters and enable queue
allocation for VF.  Calculate pcie channel and queue congestion
management for VF.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: add probe to initialize VF devices
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:22 +0000 (04:18 +0530)]
net/cxgbe: add probe to initialize VF devices

Add probe to initialize VF devices.  Separate init/de-init paths
for PF and VF.  Do firmware state initialization wrt VF and retrieve
various operational parameters by querying firmware.  Finally configure
and initialize ports.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: add base for enabling VF ports
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:21 +0000 (04:18 +0530)]
net/cxgbe: add base for enabling VF ports

Add base to enable VF ports in subsequent patches.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: add VF firmware mailbox
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:20 +0000 (04:18 +0530)]
net/cxgbe: add VF firmware mailbox

Add firmware mailbox communication support for VF.  Add is_pf4()
to check if driver is attached to PF4.  Use is_pf4() to determine
whether to use PF or VF mailbox communication.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/cxgbe: add skeleton VF driver
Kumar Sanghvi [Sat, 10 Mar 2018 22:48:19 +0000 (04:18 +0530)]
net/cxgbe: add skeleton VF driver

Add minimal VF driver.  Declare functions common to both PF and VF
functionality in separate header file and import the header file.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/avp: convert to SPDX license tags
Allain Legacy [Wed, 28 Mar 2018 16:55:06 +0000 (11:55 -0500)]
net/avp: convert to SPDX license tags

As per the following commit the AVP files maintained by Wind River are
converted to use the SPDX license tag format.

    commit a4862c9e1a98 ("license: introduce SPDX identifiers")

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/liquidio: move to new offload API
Shijith Thotton [Wed, 28 Mar 2018 06:51:06 +0000 (12:21 +0530)]
net/liquidio: move to new offload API

Make use of new offloads member instead of bit fields in port Rx conf.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
6 years agonet/mlx5: fix RSS key length query
Shahaf Shuler [Mon, 26 Mar 2018 10:12:19 +0000 (13:12 +0300)]
net/mlx5: fix RSS key length query

The RSS key length returned by rte_eth_dev_info_get command was taken
from the
PMD private structure. This structure initialization was done only after
the port configuration.

Considering Mellanox device supports only 40B long RSS key, reporting
the fixed number instead.

Fixes: 29c1d8bb3e79 ("net/mlx5: handle a single RSS hash key for all protocols")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: enforce RSS key length limitation
Shahaf Shuler [Mon, 26 Mar 2018 10:12:18 +0000 (13:12 +0300)]
net/mlx5: enforce RSS key length limitation

RSS hash key must be 40 Bytes long.

Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: setup RSS regardless of queue count
Dahir Osman [Wed, 21 Mar 2018 12:47:51 +0000 (13:47 +0100)]
net/mlx5: setup RSS regardless of queue count

In some environments it is desirable to have the NIC perform RSS
normally on the packet regardless of the number of queues configured.
The RSS hash result that is stored in the mbuf can then be used by
the application to make decisions about how to distribute workloads
to threads, secondary processes, or even virtual machines if the
application is a virtual switch.  This change to the mlx5 driver
aligns with how other drivers in the Intel family work.

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Allain Legacy <allain.legacy@windriver.com>
6 years agonet/mlx5: fix icc build
Nélio Laranjeiro [Mon, 19 Mar 2018 10:42:16 +0000 (11:42 +0100)]
net/mlx5: fix icc build

Remove the second declaration of device_attr [1] inside the loop as well as
the query_device_ex() which has already been done outside of the loop.

[1] https://dpdk.org/ml/archives/dev/2018-March/091744.html

Fixes: 9a761de8ea14 ("net/mlx5: flow counter support")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/mlx5: fix TSO enablement
Shahaf Shuler [Thu, 15 Mar 2018 11:00:05 +0000 (13:00 +0200)]
net/mlx5: fix TSO enablement

TSO should be set if either of the TSO offload flags is requested.

Fixes: dbccb4cddcd2 ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
6 years agonet/igb: fix flow RSS queue index
Wei Zhao [Wed, 21 Mar 2018 07:18:10 +0000 (15:18 +0800)]
net/igb: fix flow RSS queue index

Igb has a bug about queue index for rss rule flow configuration
when set redirection table.

Fixes: 424ae915baf0 ("net/e1000: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
6 years agonet/i40evf: add multicast MAC address filtering
Olivier Matz [Thu, 25 Jan 2018 14:36:22 +0000 (15:36 +0100)]
net/i40evf: add multicast MAC address filtering

Add support the set_mc_addr_list device operation in the i40evf PMD.

The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/i40e: fix flow RSS configuration error
Wei Zhao [Mon, 26 Mar 2018 01:11:39 +0000 (09:11 +0800)]
net/i40e: fix flow RSS configuration error

I40e needs a protection for rss rule flow configuration
after a rule is set for a port.

Fixes: ecad87d22383 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/i40e: fix intr callback unregister by adding retry
Yunjian Wang [Tue, 20 Mar 2018 07:01:24 +0000 (15:01 +0800)]
net/i40e: fix intr callback unregister by adding retry

The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.

Fixes: d42aaf30008b ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/sfc: add device parameter to choose FW variant
Roman Zhukov [Mon, 26 Mar 2018 12:50:36 +0000 (13:50 +0100)]
net/sfc: add device parameter to choose FW variant

Add support of choice the preferred firmware variant to use in device
parameters.

Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agonet/sfc/base: add values for RxDPCPU firmware id recognition
Roman Zhukov [Mon, 26 Mar 2018 12:50:35 +0000 (13:50 +0100)]
net/sfc/base: add values for RxDPCPU firmware id recognition

Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agonet/sfc/base: support choosing firmware variant
Gautam Dawar [Mon, 26 Mar 2018 12:50:34 +0000 (13:50 +0100)]
net/sfc/base: support choosing firmware variant

Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agonet/bnxt: fix flow director with same cmd different queue
Somnath Kotur [Mon, 26 Mar 2018 03:22:06 +0000 (08:52 +0530)]
net/bnxt: fix flow director with same cmd different queue

When user reissues same flow director cmd with a different queue
update the existing filter to redirect flow to the new desired
queue as destination just like the other filters like 5 tuple and
generic flow.

Fixes: 2d64da097aa0 ("net/bnxt: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
6 years agonet/sfc: fix type of opaque pointer in perf profile handler
Roman Zhukov [Sat, 24 Mar 2018 06:42:23 +0000 (06:42 +0000)]
net/sfc: fix type of opaque pointer in perf profile handler

The 'opaque' pointer in handler function is the last argument
of sfc_kvargs_process() function and it is pointer to the adapter
'evq_flags' that has a uint32_t type. So 'value' must be pointer
to uint32_t.

Fixes: c22d3c508e0c ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agoethdev: fix queue start
Qi Zhang [Thu, 22 Mar 2018 12:59:01 +0000 (20:59 +0800)]
ethdev: fix queue start

Device must be started before start any queue.

Fixes: 0748be2cf9a2 ("ethdev: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
6 years agoethdev: return named opaque type instead of void pointer
Ferruh Yigit [Tue, 20 Mar 2018 16:34:04 +0000 (16:34 +0000)]
ethdev: return named opaque type instead of void pointer

"struct rte_eth_rxtx_callback" is defined as internal data structure and
used as named opaque type.

So the functions that are adding callbacks can return objects in this
type instead of void pointer.

Also const qualifier added to "struct rte_eth_rxtx_callback *" to
protect it better from application modification.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
6 years agonet/avp: conform to new ethdev offload API
Allain Legacy [Mon, 19 Mar 2018 13:48:01 +0000 (08:48 -0500)]
net/avp: conform to new ethdev offload API

This change updates the AVP driver to conform with the new ethdev
offload API.  As per these commits:

    commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")'
    commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")'

Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
6 years agonet/sfc: fix mbuf data alignment calculation
Andrew Rybchenko [Mon, 19 Mar 2018 07:50:11 +0000 (07:50 +0000)]
net/sfc: fix mbuf data alignment calculation

Unlike ffs() rte_bsf32() counts bit position from 0.

Fixes: 0c7a0c35f24c ("net/sfc: calculate Rx buffer size which may be used")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agoethdev: remove unused struct forward declaration
Ferruh Yigit [Fri, 16 Mar 2018 11:14:50 +0000 (11:14 +0000)]
ethdev: remove unused struct forward declaration

Fixes: 331c447ad913 ("ethdev: separate internal structures into own header")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agoethdev: support dynamic logging
Ferruh Yigit [Tue, 13 Mar 2018 11:07:23 +0000 (11:07 +0000)]
ethdev: support dynamic logging

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agonet/dpaa: prefer defines for link speed values
Ferruh Yigit [Fri, 9 Mar 2018 17:59:03 +0000 (17:59 +0000)]
net/dpaa: prefer defines for link speed values

Use existing defines instead of hardcoded vales.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agonet/bnxt: fix LRO disable
Ajit Khaparde [Wed, 28 Feb 2018 22:12:36 +0000 (14:12 -0800)]
net/bnxt: fix LRO disable

When the vnic_tpa_cfg HWRM command is sent to the FW,
we are not passing the VNIC ID in case of disable.
This can cause the FW to return an error.
Correct VNIC ID needs to be passed for both enable and disable.

Fixes: 0958d8b6435d ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agoethdev: fix port id storage
Ferruh Yigit [Fri, 9 Mar 2018 11:27:48 +0000 (11:27 +0000)]
ethdev: fix port id storage

port_id is now 16bits, update function parameter according.

Fixes: 4c270218aa26 ("ethdev: support security APIs")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
6 years agonet/sfc: add dynamic log level for MCDI messages
Ivan Malov [Wed, 21 Mar 2018 11:28:21 +0000 (11:28 +0000)]
net/sfc: add dynamic log level for MCDI messages

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: remove dedicated init log parameter
Ivan Malov [Wed, 21 Mar 2018 11:28:20 +0000 (11:28 +0000)]
net/sfc: remove dedicated init log parameter

The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: prepare to merge init logs with main log type
Ivan Malov [Wed, 21 Mar 2018 11:28:19 +0000 (11:28 +0000)]
net/sfc: prepare to merge init logs with main log type

Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: support per-port dynamic logging
Ivan Malov [Wed, 21 Mar 2018 11:28:18 +0000 (11:28 +0000)]
net/sfc: support per-port dynamic logging

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agonet/sfc: support driver-wide dynamic logging
Ivan Malov [Wed, 21 Mar 2018 11:28:17 +0000 (11:28 +0000)]
net/sfc: support driver-wide dynamic logging

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
6 years agoeal: register log type and pick level from args
Ivan Malov [Wed, 21 Mar 2018 11:28:16 +0000 (11:28 +0000)]
eal: register log type and pick level from args

Dynamic log types are registered on RTE_INIT() step.
This allows one to set log levels by EAL options on
application launch. However, this does not allow to
manage log types if they are created during runtime.

EAL does not store log levels and types passed from
the command line. Thus, they cannot be picked later.
This is an obvious flaw since it would be better to
be able to pick levels for dynamic types registered
for runtime-determined facilities such as NIC ports.

This patch provides a mechanism to store log levels
passed from EAL options and adds an API to register
log types and pick levels from the internal storage.

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/mlx5: refuse empty VLAN flow specification
Nélio Laranjeiro [Tue, 13 Mar 2018 14:17:39 +0000 (15:17 +0100)]
net/mlx5: refuse empty VLAN flow specification

Verbs specification doesn't help to distinguish between packets having an
VLAN and those which do not have, this ends by having flow rule which does
not react as the user expects e.g.

 flow create 0 ingress pattern eth / vlan / end action queue index 0 / end
 flow create 0 ingress pattern eth / end action queue index 1 / end

are colliding in Verbs definition as in both rule are matching packets with
or without VLAN.
For this reason, the VLAN specification must not be empty, otherwise the
PMD has to refuse it.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: improve flow error explanation
Nélio Laranjeiro [Tue, 13 Mar 2018 14:17:38 +0000 (15:17 +0100)]
net/mlx5: improve flow error explanation

Fill the error context in conversion function to provide a better reason on
why it cannot be done to the user.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: change tunnel flow priority
Nélio Laranjeiro [Tue, 13 Mar 2018 14:17:36 +0000 (15:17 +0100)]
net/mlx5: change tunnel flow priority

Packet matching inner and outer flow rules are caught by the first one
added in the device as both flows are configured with the same priority.
To avoid such situation, the inner flow can have an higher priority than
the outer ones as their pattern matching will otherwise collide.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: fix link status to use wait to complete
Nélio Laranjeiro [Mon, 12 Mar 2018 13:43:19 +0000 (14:43 +0100)]
net/mlx5: fix link status to use wait to complete

Wait to complete is present to let the application get a correct status
when it requires it, it should not be ignored.

Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Fixes: cb8faed7dde8 ("mlx5: support link status update")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: fix link status behavior
Nélio Laranjeiro [Mon, 12 Mar 2018 13:43:18 +0000 (14:43 +0100)]
net/mlx5: fix link status behavior

This behavior is mixed between what should be handled by the application
and what is under PMD responsibility.

According to DPDK API:
- link_update() should only query the link status [1]
- link_set_{up,down}() should only set the link to the according status [1]
- dev_{start,stop}() should enable/disable traffic reception/emission [2]

On this PMD, the link status is retrieved from the net device associated
owned by the Linux Kernel, it does not means that even when this interface
is down, the PMD cannot send/receive traffic from the NIC those two
information are unrelated, until the physical port is active and has a
link, the PMD can receive/send traffic on the wire.

According to DPDK API, calling the rte_eth_dev_start() even when the Linux
interface link is down is then possible and allowed, as the traffic will
flow between the DPDK application and the Physical port.

This also means that a synchronization between the Linux interface and the
DPDK application remains under the DPDK application responsibility.

To handle such synchronization the application should behave as the
following scheme, to start:

 rte_eth_get_link(port_id, &link);
 if (link.link_status == ETH_DOWN)
rte_eth_dev_set_link_up(port_id);
 rte_eth_dev_start(port_id);

Taking in account the possible returned values for each function.

and to stop:

 rte_eth_dev_stop(port_id);
 rte_eth_dev_set_link_down(port_id);

The application should also set the LSC interrupt callbacks to catch and
behave accordingly when the administrator set the Linux device down/up.
The same callbacks are called when the link on the medium falls/raise.

[1] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev_core.h
[2] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev.h#n1677

Fixes: c7bf62255edf ("net/mlx5: fix handling link status event")
Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
6 years agonet/mlx5: remove kernel version check
Nélio Laranjeiro [Mon, 12 Mar 2018 13:43:17 +0000 (14:43 +0100)]
net/mlx5: remove kernel version check

Kernel version check was introduced in
commit 3a49ffe38a95 ("net/mlx5: fix link status query")
due to a bug fixed by
commit ef09a7fc7620 ("net/mlx5: fix inconsistent link status query")

This patch restore the previous behavior as described in Linux API.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: fix ARM build
Yongseok Koh [Wed, 14 Mar 2018 17:51:48 +0000 (10:51 -0700)]
net/mlx5: fix ARM build

rdma-core v16 has a bug. The following compilation error occurs on ARM
hosts.

In file included
from drivers/net/mlx5/mlx5_glue.h:16:0,
from drivers/net/mlx5/mlx5_glue.c:11:
/usr/include/infiniband/mlx5dv.h:144:2: error: unknown type name 'off_t'
off_t   uar_mmap_offset;
^

As a temporary fix, sys/types.h is included in PMD. This has been fixed in
rdma-core v17. This can be removed when all the Linux distros are shipped
with rdma-core v17 or back-ported fix. As of now, RedHat 7.5 is known to
have rdma-core v16.

Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: fix existing file removal
Xueming Li [Fri, 16 Mar 2018 15:22:27 +0000 (23:22 +0800)]
net/mlx5: fix existing file removal

There is no guarantee that the file won't be removed by external
user/application between the stat() and remove() syscalls, remove() will
fail if the file no longer exists.

Fixes: f8b9a3bad467 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agonet/mlx5: use dynamic logging
Nélio Laranjeiro [Tue, 13 Mar 2018 09:23:56 +0000 (10:23 +0100)]
net/mlx5: use dynamic logging

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: use port id in PMD log
Nélio Laranjeiro [Tue, 13 Mar 2018 09:23:55 +0000 (10:23 +0100)]
net/mlx5: use port id in PMD log

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: standardize on negative errno values
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:06 +0000 (13:21 +0100)]
net/mlx5: standardize on negative errno values

Set rte_errno systematically as well.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: change non failing function return values
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:05 +0000 (13:21 +0100)]
net/mlx5: change non failing function return values

These functions return int although they are not supposed to fail,
resulting in unnecessary checks in their callers.
Some are returning error where is should be a boolean.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: prefix all functions with mlx5
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:04 +0000 (13:21 +0100)]
net/mlx5: prefix all functions with mlx5

This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.

At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: remove control path locks
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:03 +0000 (13:21 +0100)]
net/mlx5: remove control path locks

In priv struct only the memory region needs to be protected against
concurrent access between the control plane and the data plane.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: remove useless empty lines
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:02 +0000 (13:21 +0100)]
net/mlx5: remove useless empty lines

Some empty lines have been added in the middle of the code without any
reason.  This commit removes them.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: add missing function documentation
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:01 +0000 (13:21 +0100)]
net/mlx5: add missing function documentation

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: normalize function prototypes
Nélio Laranjeiro [Mon, 5 Mar 2018 12:21:00 +0000 (13:21 +0100)]
net/mlx5: normalize function prototypes

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: mark parameters with unused attribute
Nélio Laranjeiro [Mon, 5 Mar 2018 12:20:59 +0000 (13:20 +0100)]
net/mlx5: mark parameters with unused attribute

Replaces all (void)foo; by __rte_unused macro except when variables are
under #if statements.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: name parameters in function prototypes
Nélio Laranjeiro [Mon, 5 Mar 2018 12:20:58 +0000 (13:20 +0100)]
net/mlx5: name parameters in function prototypes

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx5: fix sriov flag
Nélio Laranjeiro [Mon, 5 Mar 2018 12:20:57 +0000 (13:20 +0100)]
net/mlx5: fix sriov flag

priv_get_num_vfs() was used to help the PMD in prefetching the mbuf in
datapath when the PMD was behaving in VF mode.
This knowledge is no more used.

Fixes: 528a9fbec6de ("net/mlx5: support ConnectX-5 devices")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>