app/testpmd: add CLI to set TC min bandwidth

Add a CLI in testpmd to test the TC min bandwidth
setting.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/ixgbe: allocate TC bandwidth

Ixgbe supports to set the relative bandwidth for the TCs.
It's a global setting for the PF and all the VFs of a
physical port.
This feature provide the API to set the bandwidth.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/thunderx: wait to complete during link update

Some DPDK applications/examples check link status on their
start. NICVF does not wait for the link, so those apps fail.

Wait up to 9 seconds for the link as other PMDs do in order
to fix those apps/examples.

Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

net/i40e: fix VLAN promisc setting

After adding VLAN filter, the VLAN promiscuous mode is
disabled. But there's no chance to enable it.
So add the check after deleting VLAN filter. If there's
no VLAN filter left, enable the VLAN promiscuous mode.

Fixes: 9f0645cd147c ("net/i40e: fix VLAN filter")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/tap: fix redirection rule after MAC change

This is necessary to ensure packets with the new MAC address as
destination get redirected to the tap device.

Also change the MAC address only if the current one is different from
the requested one.

Fixes: 2bc06869cd94 ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>

net/tap: fix null MAC address at init

Immediately after init (probing), the device MAC address is all zeroes.
It should be possible to get a correct MAC address as soon as that,
without need for a dev_configure().

With this patch, a MAC address is set in eth_dev_tap_create()
explicitly. It either comes from the remote if any was configured, or is
randomly generated. In any case, the device MAC address is guaranteed to
be the correct one when the tap netdevice actually gets created in
tun_alloc().

Fixes: f76d46b4ff08 ("net/tap: add MAC address management")
Fixes: 2bc06869cd94 ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>

net/tap: update netlink error code management

Some errors received from the kernel are acceptable, such as a -ENOENT
for a rule deletion (the rule was already no longer existing in the
kernel). Make sure we consider return codes properly. For that,
nl_recv() has been simplified.

qdisc_exists() function is no longer needed as we can check whether the
kernel returned -EEXIST when requiring the qdisc creation. It's simpler
and faster.

Add a few messages for clarity when a netlink error occurs.

Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>

net/mlx4: use a single drop queue for all drop flows

Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

net/mlx5: fix RSS flow rule with non existing queues

RSS flow rule validation accepts any queue even non existing ones which
causes a segmentation fault at creation time.

Fixes: 3d821d6fea40 ("net/mlx5: support RSS action flow rule")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/mlx5: remove duplicated process in flow API

Flow validation already processes the final actions to verify if a rule can
be applied or not and the same is done during creation. As the creation
function relies on validation to generate and apply a rule, this job can be
fully handled by the validation function.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/tap: remove minimum packet size in Rx

With support for segmented packets, it is now possible to easily receive
packets of many sizes, given an adequate number of descriptors.

Remove limitation on the minimum size of mbuf: on reception, if a packet
won't fit in the queue's mbufs, it will be detected in the packet info
and the packet will be discarded.

Fixes: 0781f5762cfe ("net/tap: support segmented mbufs")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>

net/tap: remove unsupported UDP/TCP port mask in flow

Only full mask (0xffff) is accepted, there is no way to specify a mask
for layer 4 ports to the kernel using TC rules.

Fixes: de96fe68ae95 ("net/tap: add basic flow API patterns and actions")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>

net/i40e/base: add README

Add README file in base to track the base code modification.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

doc: fix typo in i40e guide

This patch fixes a trivial typo in i40e documentation;

The comment about the behavior upon DPDK application quit was wrongly
titled as "after DPDK application exist" instead of "after DPDK
application exit", and this trivial patch fixes it.

Fixes: edf1b618313a ("doc: add limitations for i40e PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

net/mlx5: remove unnecessary Verbs library calls

Remove unnecessary interface queries and the Resource Domain when
creating the Queue Pair. Since mlx5 PMD data path is on top of native
APIs, such Verbs library calls are no longer needed.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/mlx5: rebuild flows on updating RETA

Currently mlx5_dev_rss_reta_update() just updates tables in the host,
therefore it isn't immediately effective until restarting the device by
calling mlx5_dev_stop()/mlx5_dev_start() to update the changes in the
device side. This patch adds rebuilding the device-specific data
structure and applying it to the device right away.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>

net/mlx5: use correct RETA table size

When querying and updating RSS RETA table, it always uses the max size of
the device instead of configured value. This patch fixes it and removed the
related comments in the code.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>

ethdev: remove requirement of aligned RETA size

In rte_eth_check_reta_mask(), it is required to align the size of the RETA
table to RTE_RETA_GROUP_SIZE but as the size can be less than the limit,
this should be removed. The change is also applied to a command of testpmd.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>

net/fm10k: fix secondary process crash

If the primary process has initialized all the queues to vector
pmd mode, the secondary process should not use scalar code path,
because the per queue data structures haven't been prepared for
that, e.g. txq->ops is for vector Tx rather than scalar Tx.

Fixes: a6ce64a97520 ("fm10k: introduce vector driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>

net/i40e: update tunnel filter restore function

The QinQ filter uses big buffers, set the big_buffer flag
when restoring a QinQ filter.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40e: update destroy tunnel filter function

The QinQ filter uses big buffers, set the big_buffer flag
when removing a QinQ filter.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40e: parse QinQ pattern

add QinQ pattern.
add i40e_flow_parse_qinq_pattern function.
add i40e_flow_parse_qinq_filter function.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40e: add QinQ filter create function

Add i40e_cloud_filter_qinq_create function, and call it
from i40e_dev_consistent_tunnel_filter_set function.
Replace the Outer IP filter with the QinQ filter.

QinQ allows multiple VLAN tags to be inserted into a single Ethernet
frame. A QinQ frame is a frame that has two VLAN 802.1Q headers.
802.1Q tunneling (QinQ) is a technique often used by Metro Ethernet
providers as a layer 2 VPN for customers.

Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/i40e: initialise L3 MAP register

The L3 MAP register is initialised to support QinQ
cloud filters.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/mlx5: fix mark id retrieval

Mark ID in the completion queue entry is 24 bits, the remaining 8 bits are
reserved and may be nonzero. Do not take them into account when looking for
marked packets.

Fixes: ea3bc3b1df94 ("net/mlx5: support mark flow action")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/sfc: fix device reconfigure

Device reconfigure should be done without close which releases
all transmit and receive queue. ethdev API assumes that previously
setup queues (minimum from configured before and now) are kept
across device reconfigure.

Fixes: aaa3f5f0f79d ("net/sfc: add configure and close stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: support changing the number of transmit queues

Fixes: a8ad8cf83f01 ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: support changing the number of receive queues

Fixes: a8e64c6b455f ("net/sfc: implement Rx subsystem stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: clarify Tx subsystem configure/close function names

Prepare to fix device reconfigure. Make it clear that corresponding
functions should be called on device configure and close operations.
No functional change.

Fixes: a8ad8cf83f01 ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: clarify Rx subsystem configure/close function names

Prepare to fix device reconfigure. Make it clear that corresponding
functions should be called on device configure and close operations.
No functional change.

Fixes: a8e64c6b455f ("net/sfc: implement Rx subsystem stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: initialize port data on attach

Port configuration should be initialized on attach to avoid reset to
defaults on device reconfigure.

Fixes: 03ed21195d9e ("net/sfc: minimum port control sufficient to receive traffic")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: move event support init to attach stage

Prepare to fix device reconfigure.
Device arguments should be parsed once on attach.
Management event queue should be initialized once on attach.

Fixes: 58294ee65afb ("net/sfc: support event queue")
Fixes: c22d3c508e0c ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: remove EvQ info array to simplify reconfigure

EvQ info array keeps information about EvQ centralized, however
EvQ pointers are available in TxQ and RxQ structures. Single
array for all EvQs complicates device reconfigure handling, so
simply git rid of it.

It removes notion of EvQ software index since there is no EvQ
array in software any more.

Fixes: 58294ee65afb ("net/sfc: support event queue")
Fixes: 9a75f75cb1f2 ("net/sfc: maintain management event queue")
Fixes: ce35b05c635e ("net/sfc: implement Rx queue setup release operations")
Fixes: 28944ac098aa ("net/sfc: implement Rx queue start and stop operations")
Fixes: b1b7ad933b39 ("net/sfc: set up and release Tx queues")
Fixes: fed9aeb46c19 ("net/sfc: implement transmit path start / stop")
Fixes: 3b809c27b1fe ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: remove flags from EvQ info

Next step to get rid of EvQ info at all.

Fixes: c22d3c508e0c ("net/sfc: support parameter to choose performance profile")
Fixes: 3b809c27b1fe ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: move EvQ entries to the EvQ control structure

EvQ info array is a problem on device reconfigure when number of
Rx and Tx queues may change. It is a step to get rid of it.

Fixes: 58294ee65afb ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: remove unused max entries from EvQ info

Fixes: 58294ee65afb ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: bind EvQ DMA space to EvQ type and type-local index

The index of an event queue index is computed from the index of the
corresponding transmit or receive queue, and depends on the total
number of receive queues. As a consequence, the index of an event
queue bound to a transmit queue changes if the total number of
receive queues is changed.

Fixes: 58294ee65afb ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>

net/sfc: clarify interrupts support function names

Make it clear that corresponding functions should be called on device
configure and close operations. No functional change.

Fixes: 06bc197796e2 ("net/sfc: interrupts support sufficient for event queue init")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc: do not drop TSO on device configure

If Tx datapath does not support TSO, TSO was dropped on device configure.
It is incorrect to change advertised offloads.

Fixes: 7a4d44a639c9 ("net/sfc: make TSO a datapath-dependent feature")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc: choose datapaths after probe and before attach

Datapath choice requires NIC capabilities knowledge and, therefore,
should be done after probe. Whereas NIC resources estimation needs
to know chosen datapath (e.g. if Tx datapath is going to use TSO).

Fixes: df1bfde4ff0d ("net/sfc: factor out libefx-based Rx datapath")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc: use correct function to free scattered packet on Rx

Put to mempool does not free chained segments.

Fixes: e0b063941e03 ("net/sfc: support scattered Rx DMA")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/ixgbe: ping VF when PF status changes

Signed-off-by: Alex Zelezniak <alexz@att.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40e: enable tunnel filter for MPLS

MPLSoUDP & MPLSoGRE is not supported by tunnel
filter due to limited resource of HW, this patch
enables MPLS tunnel filter by replacing inner_mac
filter.

This configuration will be set when adding MPLSoUDP
and MPLSoGRE filter rules, and it will be invalid
only by NIC core reset.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add flow API MPLS parsing function

This patch add MPLS parsing function to support MPLS filtering.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

app/testpmd: add MPLS and GRE fields to flow command

This patch exposes the following item fields through the flow command:

- MPLS label
- GRE protocol

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

ethdev: add MPLS and GRE flow API items

This patch adds MPLS and GRE items to generic rte flow.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/sfc: fix leak if EvQ DMA space allocation fails

Fixes: 58294ee65afb ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc: destroy event queue when Tx queue is released

Fixes: b1b7ad933b39 ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/sfc: destroy event queue when Rx queue is released

Fixes: ce35b05c635e ("net/sfc: implement Rx queue setup release operations")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/mlx5: fix Tx when first segment size is too short

First segment size must be at least 18 bytes, packets not respecting this
are silently not sent by the NIC but counted as sent by the PMD.  The only
way to figure out is compiling the PMD in debug mode.

Fixes: 6579c27c11a5 ("net/mlx5: remove gather loop on segments")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

net/qede: prevent crash while changing MTU dynamically

The driver can handle dynamic MTU change without needing the port to be
stopped explicitly by the application. However, there is currently no
check to prevent I/Os from happening on a different thread while the
port is going thru' reset internally. This patch fixes this issue by
assigning RX/TX burst functions to a dummy function and also reconfigure
RX bufsize for each rx queue based on the new MTU value.

Fixes: 200645ac7909 ("net/qede: set MTU")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix VF RSS configuration

The newer SR-IOV PF drivers expects RX/TX queues to be created before
applying RSS configuration. This patch addresses this requirement by
deferring RSS configuration till the queues are created. Even though
this issue is only seen in SR-IOV context, the changes will be made
applicable to PF also to keep the behavior consistent between VF/PF.

Fixes: 7ab35bf6b97b ("net/qede: fix RSS")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: fix missing UDP protocol in RSS offload types

Both UDP and TCP based RSS offload types are supported by the device.
This patch adds UDP protocol which got missed out in the original patch.

Fixes: 4c98f2768eef ("net/qede: support RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>

doc: add dynamic i40e device personalization

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

app/testpmd: add command for getting loaded DDP profiles

This patch is to add testpmd CLI for getting all loaded DDP profiles.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: support getting all loaded DDP profiles

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

app/testpmd: add command for loading DDP

This patch is to add testpmd CLI for loading dynamic
device personalization (DDP).

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: add dynamic device personalization processing

Add support for loading a dynamic device personalization profile (DDP).

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: refine consistent tunnel filter

Add i40e_tunnel_type enumeration type to refine consistent
tunnel filter, it will be esay to add new tunnel type for
i40e.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: support tunnel filter to VF

Previously, only tunnel filter to PF is supported.
This patch adds i40e_dev_consistent_tunnel_filter_set
function for consistent filter API to support tunnel
filter to VF.

Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: rename tunnel filter function

Change tunnel filter function name to VXLAN filter
function, prepare for other tunnel filter function.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e: rework tunnel filter functions

Rework tunnel filter functions to align with the
new command buffer for add/remove cloud filter.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

doc: update Tx burst behavior

Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>

net/vhost: remove limit of vhost Rx burst size

vhost removes limit of Rx burst size(32 pkts) and supports to make
an best effort to receive pkts.

Cc: yuanhan.liu@linux.intel.com
Cc: maxime.coquelin@redhat.com
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/vhost: remove limit of vhost Tx burst size

vhost removes limit of Tx burst size(32 pkts) and supports to make
an best effort to transmit pkts.

Cc: yuanhan.liu@linux.intel.com
Cc: maxime.coquelin@redhat.com
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/ixgbe: remove limit of Tx burst size

To add a wrapper function to remove the limit of tx burst size and
implement the "make an best effort to transmit the pkts" policy.
The patch makes ixgbe vec function work in a consistent behavior
like ixgbe_xmit_pkts_simple and ixgbe_xmit_pkts do that.

Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/i40e: remove limit of Tx burst size

To add a wrapper function to remove the limit of tx burst size. The patch
makes i40e vec function an best effort to transmit the pkts in the
consistent behavior like i40e_xmit_pkts_simple and i40e_xmit_pkts do that.

Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/fm10k: remove limit of Tx burst size

To add a wrapper function to remove the limit of tx burst size.
The patch makes fm10k vec function an best effort to transmit
pkts in the consistent behavior like fm10k_xmit_pkts does that.

Cc: Jing Chen <jing.d.chen@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/qede: update PMD version to 2.4.0.1

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: support LRO/TSO offloads

This patch includes slowpath configuration and fastpath changes
to support LRO and TSO. A bit of revamping is needed in order
to make use of existing packet classification schemes in Rx fastpath
and for SG element processing in Tx.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede: support ntuple and flow director filter

Add limited support for ntuple filter and flow director configuration.
The filtering is based on 4-tuples viz src-ip, dst-ip, src-port,
dst-port. The mask fields, tcp_flags, flex masks, priority fields,
Rx queue drop etc are not supported.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede/base: support ARFS mode

Add base driver APIs to enable accelerated RFS[aRFS] mode and ramrod
to configure rfs and ntuple filter.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

net/qede/base: semantic changes

Make APIs static and other semantic changes.
A step toward cleaning 'make C=1' with GCC 4.8.3.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: prevent race condition during unload

Merge hw_stop and hw_reset into one function.
Prevent race condition between MFW attentions and pf stop command during
unload flow that causes an ASSERT.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: multi-Txq support on same queue-zone for VFs

A step toward having multi-Txq support on same queue-zone for VFs.

This change takes care of:

 - VFs assume a single CID per-queue, where queue X receives CID X.
   Switch to a model similar to that of PF - I.e., Use different CIDs
   for Rx/Tx, and use mapping to acquire/release those. Each VF
   currently will have 32 CIDs available for it [for its possible 16
   Rx & 16 Tx queues].

 - To retain the same interface for PFs/VFs when initializing queues,
   the base driver would have to retain a unique number per-each queue
   that would be communicated in some extended TLV [current TLV
   interface allows the PF to send only the queue-id]. The new TLV isn't
   part of the current change but base driver would now start adding
   such unique keys internally to queue_cids. This would also force
   us to start having alloc/setup/free for L2 [we've refrained from
   doing so until now]
   The limit would be no-more than 64 queues per qzone [This could be
   changed if needed, but hopefully no one needs so many queues]

 - In IOV, Add infrastructure for up to 64 qids per-qzone, although
   at the moment hard-code '0' for Rx and '1' for Tx [Since VF still
   isn't communicating via new TLV which index to associate with a
   given queue in its queue-zone].

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: prevent DMAE transactions during recovery

Prevent DMA engine transactions during recovery phase.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add UDP ports in bulletin board message

Add UDP ports in bulletin board message.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: allow PMD to control vport and RSS engine ids

Let PMD have control over the vport-id and rss-eng-id of a given VF
during initialization.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add PF parameter

Add a common enum to pf_params for RDMA.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: move code bits

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: zero out MFW mailbox data

Zero the whole union data of the Management FW mailbox before copying
the actual union member

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add return code check

Add a check of the return code of ecore_mcp_cmd_and_union() in
ecore_mcp_send_protocol_stats()

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: set max values for soft resources

Add support for the new interface with the Management FW for setting
max values of "soft" resources.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add macro for unsupported command

Add a macro for unsupported management FW command

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add mailbox for resource allocation

Add the Management FW mailbox for getting non-l2 resource allocation
information.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add macro got resource value message

Add macro got resource value message

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: support coalescing for VF

Add coalescing support for VFs.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: update bulletin board during VF init

Updated bulletin board with link state during VF initialization.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: support non-L2 dcbx tlv application

Add non-l2 dcbx tlv application support.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: support previous driver unload

New driver/management fw load request sequence for handling previous
driver unload.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: change valloc to vzalloc

Change OSAL_VALLOC() into OSAL_VZALLOC() which would also zero memory.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: use L2-handles for RSS configuration

Move RSS configuration into using L2-handles instead of queue-ids.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add new image types

Add new image types - RECOVERY and PK (Public Key) towards
the second phase of NVRAM security support.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: remove clock slowdown option

Remove clock slowdown NVM config option as this is not supported
for current chipsets.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add API for using MFW resource lock

Add base driver API for using the Management FW resource lock

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add mask/shift defines for resource command

Add several mask/shift defines for the resource command

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: prevent transmitter stuck condition

Change OOO TC properly to prevent transmitter stuck condition
due to credit underruns.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: formatting changes

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: support tunnelling for VF

Add new tunnelling support for VFs.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: revise tunnel APIs/structs

Revise tunnel APIs/structs.
 - Unite tunnel start and update params in single struct
   "ecore_tunnel_info"
 - Remove A0 chip tunnelling support.
 - Added per tunnel info - removed bitmasks.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>