net/i40e/base: group base mode VF offload flags

Group together the minimum set of offload capabilities that are always
supported by VF in base mode. This define would be used by PF to make
sure VF in base mode gets minimum of base capabilities.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e/base: fix bit test mask

Incorrect bit mask was used for testing "get link status" response.
Instead of I40E_AQ_LSE_ENABLE (which is actually 0x03) it should
be I40E_AQ_LSE_IS_ENABLED (which is defined as 0x01).

Fixes: 8db9e2a1b232 ("i40e: base driver")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e/base: remove unnecessary code

This patch changes some assignments and removing the unnecessary
code to avoid error reported by static analysis tools.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e/base: fix flow control set for 25G

Add phy_type_ext copied from old setting to rpevents 25G PHY
types from being disabled when setting the flow control modes.

Fixes: 51131ae119 ("net/i40e/base: get PHY abilities for 25G")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/i40e/base: add encap checksum VF offload flag

Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum
offload for encapsulated packets is supported by default. Going forward,
this feature needs to be negotiated with PF before advertising to the
stack. Hence, we need a flag to control it.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/nfp: document supported features

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

net/ixgbe: fix typo in comment

Fixes: c03fcee9abbd ("ixgbe: remove CRC size from byte counters")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/sfc: restart TxQ in case of exception on event queue

Examples of recoverable exceptions because of Tx error are:
 - Tx descriptor PCI read error
 - invalid Tx option descriptor
 - Tx option descriptor not supported by the firmware variant
 - unexpected Tx option descriptor (e.g. missing FATSO2A before
   FATSO2B, missing FATSO2B after FATSO2A)
 - incomplete packet push (CONT bit set in the latest pushed DMA
   descriptor)

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>

net/sfc: restart RxQ in case of exception on event queue

Examples of recoverable exceptions are:
 - unexpected Rx event (Rx scatter abort with non-zero size,
   too big Rx descriptors batch completed)
 - Rx error due to invalid Rx descriptors push
 - Rx error due to Rx descriptor read error (e.g. unmapped Rx ring
   and denied by IOMMU)

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>

net/sfc: send bursts of packets

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement transmit path start / stop

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: set up and release Tx queues

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add function to check configured Tx mode

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: provide basic stubs for Tx subsystem

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: discard scattered packet on Rx correctly

Since Rx scatter is not supported, all scattered packets are discarded.
It is not always possible to disable scatter on Huntington, so we
should handle scattered packets correctly in any case.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement device callback to Rx burst of packets

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement Rx queue start and stop operations

These functions should set the queue state in dev->data->rx_queue_state
array.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: validate Rx queue buffers setup

Check that Rx mbuf pool, MTU and Rx scatter config are in sync.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: calculate Rx buffer size which may be used

Take Rx buffer start alignment and end-padding into account.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement Rx queue setup release operations

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: check configured Rx mode

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement Rx subsystem stubs

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: retrieve link info

Signed-off-by: Artem Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: minimum port control sufficient to receive traffic

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: periodic management EVQ polling using alarm

Timers cannot be used to implement periodic polling, since it implies
requirement on application to process timers in the main loop.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: maintain management event queue

The event queue is required for device level events (e.g. link status
change) and flush events.
Provide thread-safe function to poll the event queue since it may be
really done from different contexts.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: implement EVQ dummy exception handling

Right now the code just logs the exception and sets flag to notify
subsequent event handlers and poller that recovery is required.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: support event queue

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: interrupts support sufficient for event queue init

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: estimate available resources

Resources required in accordance with configuration are
allocated only.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add device start and stop operations

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add device configuration checks

Manual link speed/duplex configuration is not supported yet.
Loopback is not supported yet.
Flow Director is not supported.
Link status change notification using interrupt is not supported yet.
Receive data notification using interrupts is not supported yet.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add configure and close stubs

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: add init on attach

The setup and configuration of the PMD is not performance sensitive,
but is not thread safe either. It is possible that the multiple
read/writes during PMD setup and configuration could be corrupted
in a multi-thread environment.  Since this is not performance
sensitive, the developer can choose to add their own layer to provide
thread-safe setup and configuration. It is expected that, in most
applications, the initial configuration of the network ports would be
done by a single thread at startup.

In the case of exception on the event queue, the event queue and
corresponding Rx/Tx queue should be restarted in the Rx/Tx queue
polling context. These operations require access to the device
control which should be serialized. The device level lock will do
the job.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: build libefx

Implement efsys.h for the PMD.

Signed-off-by: Artem Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import libefx licensing

Provide API to deal with licenses on SFN7xxx and SFN8xxx
family adapters.

EFSYS_OPT_LICENSING should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import bootrom configuration

Provide API to read/write bootrom configuration from/to NVRAM.

EFSYS_OPT_BOOTROM should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import VPD support

Provide API to read/write PCI Vital Product Data.

EFSYS_OPT_VPD should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import NVRAM support

Provide API to work with NIC non-volatile memory. It is used
to update firmware, configure NIC including bootrom parameters,
manage licenses, store PCI Vital Product Data etc.

EFSYS_OPT_NVRAM should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import Rx packed stream mode

In packed stream mode, large buffers are provided to the NIC
into which many packets can be delivered. This reduces the
number of queue refills needed compared to delivering every
packet into a separate buffer.

EFSYS_OPT_RX_PACKED_STREAM should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import monitors access via MCDI

EFSYS_OPT_MON_MCDI should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import monitors statistics

EFSYS_OPT_MON_STATS should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import loopback control

EFSYS_OPT_LOOPBACK should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import RSS support

EFSYS_OPT_RX_SCALE should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import Rx scatter support

EFSYS_OPT_RX_SCATTER should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import event prefetch

EFSYS_OPT_EV_PREFECT allows to enable event prefetching
when event queue is polled.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import MAC statistics

MAC statistics are either periodically (if supported/requested)
or on-demand written to provided DMA-mapped memory.
If periodic update is not supported (e.g. for EF10 virtual
functions), it is the driver responsibility to handle it.

EFSYS_OPT_MAC_STATS should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import PHY LEDs control

EFSYS_OPT_PHY_LED_CONTROL should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import PHY statistics

EFSYS_OPT_PHY_STATS should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import PHY flags control

EFSYS_OPT_PHY_FLAGS should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import software per-queue statistics

EFSYS_OPT_QSTATS should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import built-in selftest

EFSYS_OPT_BIST should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import diagnostics support

EFSYS_OPT_DIAG should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import SFN8xxx family support

SFN8xxx is the second family based on EF10 architecture.

It has few differences from SFN7xxx adapters family.

EFSYS_OPT_MEDFORD should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import SFN7xxx family support

SFN7xxx is the first family based on EF10 architecture.

EFSYS_OPT_HUNTINGTON should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import 5xxx/6xxx family support

EFSYS_OPT_SIENA should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import MCDI proxy authorization

MCDI proxy authorization may be used if privileged PCI
function (physical function) would like to intercept and
authorize MCDI requests done by unprivileged (e.g. virtual)
PCI function. It may be used to control unprivileged
function Rx mode (e.g. promiscuous, all-multicast), MTU
and default MAC address change requests etc.

Current libefx support is limited to client-side which
is required to work when function requests need to be
authorized.

Server side support required to request and do the
authorization is not implemented yet.

EFSYS_OPT_MCDI_PROXY_AUTH should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import MCDI logging

Driver can provide a function to be called to log MCDI
requests and responses to help with debugging.

Solarflare netlogdecode cross-platform tool may be used
to decode these logs.

EFSYS_OPT_MCDI_LOGGING should be enabled to use it.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import MCDI implementation

Implement interface to talk to NIC management CPU. Provide
helpers to fill in MCDI requests, execute it and process
received response.

MCDI request is prepared in either PCI BAR mapped memory
(SFN5xxx/SFN6xxx) or DMA-mapped memory (SFN7xxx/SFN8xxx) and,
doorbell is pressed (memory-mapped register) to execute it.

Events about MCDI completion are delivered to house-keeping
event queue, but usage of these events is optional and MCDI
buffer may be simply polled waiting for completion
indication set.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import MCDI definition

The header defines data interface between host CPU and NIC
management CPU.

The header is automatically generated from firmware sources.

MCDI is used on NIC control path (configuration,
event/transmit/receive queues setup and teardown etc), but
not used on data path.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import filters support

Filtering capabilities depend on NIC family and used firmware
variant. Provided API allows to get supported filter types
(in a priority order), add/delete individual filters and
restore entire filter table after, for example, NIC management
CPU reboot.

Rx filters allow to redirect matching flow to specified Rx queue.

Tx filters allow to control generated traffic (e.g. to implement
virtual function anti-spoofing control).

EFSYS_OPT_FILTER should be enabled to use it. It is required
for SFN7xxx and SFN8xxx adapter families support.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import register definitions

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc/base: import libefx base

libefx is a platform-independent library to implement drivers
for Solarflare network adapters. It provides unified adapter
family independent interface (if possible).

Driver must provide efsys.h header which defines options
(EFSYS_OPT_*) to be used and macros/functions to allocate
memory, read/write DMA-mapped memory, read/write PCI BAR
space, locks, barriers etc.

efx.h and efx_types.h provide external interfaces intended
to be used by drivers. Other header files are internal.

From Solarflare Communications Inc.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/sfc: libefx-based driver stub

Enable the PMD by default on supported configurations.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/i40evf: fix casting between structs

Casting from structs which lay out data in typed members
to structs which have flat memory buffers, will cause
problems if the alignment of the former isn't as expected.
This patch removes the casting between structs.

Fixes: ae19955e7c86 ("i40evf: support reporting PF reset")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/e1000/base: announce supported devices

Document all supported NICs.
Add Intel I219 NICs support in release note.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/i40e: enable auto link update for 25G

For 25G devices auto link update was disabled because it was causing
link issues when enabled.

The problem found because of interface changes in admin queue command
"set_phy_config" and "get_phy_capabilities" for 25G.

This patch fixes the issue and enables auto link update for 25G devices.

Fixes: 75d133dd3296 ("net/i40e: enable 25G device")

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>

net/i40e: fix logging for Tx free threshold check

Fixes: 4861cde46116 ("i40e: new poll mode driver")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>

net/e1000: enable new I219 devices

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: update shared code version

Updated to 2016.11.22

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: support more I219 devices

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: disable force K1-off feature

MAC-PHY desync may occur causing misdetection of link up event.
Disabling K1-off feature can work around the problem.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: add workaround for possible stalled packet

This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: enable new I219 devices

Enable the support of new I219 devices.
Also define some registers for future usage.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: add workaround for ULP entry flow

For I217 revision 6, when entering Ultra Low Power (ULP) we need to enable
Low Power Link Up (LPLU) and disable Gig speed to make it work.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: increase LANPHYPC low duration

LANPHYPC low duration of 10 usec was too low for some corner cases
causing interface mismatches during Ultra Low Power (ULP) exit.

This patch increases the LANPHYPC low duration to 1 msec.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: clear ULP configuration register on ULP exit

There are some client PHY Ultra Low Power (ULP) register bits that are
configured by the Manageability Engine (ME) FW.

The driver must ensure that these bits are cleared on exit from ULP.
Ordinarily the ME FW would do that, but there are cases in which the
FW is not present, and the driver must handle that.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: restore link speed after ULP exit

When Ultra Low Power (ULP) enabled, the client PHY needs to be set up
for link configuration after cable reconnected.

Previously link configuration was only done in auto-negotiate mode.

Do link configuration also in autoneg disabled mode.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: define max Rx jumbo frame size

Add definition MAX_RX_JUMBO_FRAME_SIZE for igb.

All igb parts (82575 and newer) have 9.5K max jumbo frame size.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: expose I350 internal function

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: get FW version for I354

I354 support was missing in the e1000_get_fw_version() which resulted in
the FW version not being reported. Support added.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: retry to get HW mailbox lock

The driver shouldn't give up if it fails to get the hardware mailbox lock.

This can happen in a situation where the PF-VF communication channel is
heavily loaded and causes complete communications failure between the PF
and VF drivers.

Add a counter and a delay. The driver will now retry ten times,
waiting one millisecond between retries.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: avoid packet loss for non-1G

To avoid packet loss, Phase Lock Loop (PLL) clock gate time needs to be
increased for non 1G speeds.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net/e1000/base: increase ULP timer

With new hardware (I219), Ultra Low Power (ULP) exit takes significantly
longer time. Therefore, driver must wait longer.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

net: align ethdev and eal driver names

Some virtual pmds report a different name than the vdev driver name
registered in eal.
While it does not hurt, let's try to be consistent.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net: remove dead driver names

Since commit b1fb53a39d88 ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.

Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
  data->drv_name
- for vdev drivers, manually set data->drv_name

At this stage, virtio-user does not properly report a driver name (fixed in
next commit).

Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>

net/mlx5: do not invalidate title CQE

We can leave the title completion queue entry untouched since its contents
are not modified.

Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix endianness in Tx completion queue

Completion queue entry data uses network endian, to access them we should
use ntoh*().

Fixes: c305090bbaf8 ("net/mlx5: replace countdown with threshold for Tx completions")

Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/mlx5: fix leak when starvation occurs

The list of segments to free was wrongly manipulated ending by only freeing
the first segment instead of freeing all of them.  The last one still
belongs to the NIC and thus should not be freed.

Fixes: a1bdb71a32da ("net/mlx5: fix crash in Rx")

Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

net/i40e: fix spelling

Fixes: da61cd084976 ("i40evf: add extended stats")
Fixes: 0eedec25ea36 ("i40e: clean log messages")

Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>

net/i40e: fix xstats value mapping

The offsets used in rte_i40evf_stats_strings for transmission
statistics were wrong, returning the total byte count rather than
the respective (unicast, multicast, broadcast, drop, & error)
packet counts.

Fixes: da61cd084976 ("i40evf: add extended stats")

Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>

net/virtio: fix build without virtio-user

When CONFIG_RTE_VIRTIO_USER is disabled (default on FreeBSD),
the virtio driver cannot be compiled:

librte_pmd_virtio.a(virtio_ethdev.o): In function `eth_virtio_dev_init':
(.text+0x1eba): undefined reference to `virtio_user_ops'

Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

examples/ethtool: display firmware version

This patch enhances the ethtool example to support to show
firmware version, in the same way that the Linux kernel
ethtool does.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

net/i40e: add firmware version get

This patch add a new function i40e_fw_version_get.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

net/ixgbe: add firmware version get

This patch adds a new function ixgbe_fw_version_get.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

net/e1000: add firmware version get

This patch adds a new function eth_igb_fw_version_get.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

ethdev: add firmware version get

This patch adds a new API 'rte_eth_dev_fw_version_get' for
fetching firmware version by a given device.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>

net/virtio: fix advertised Rx offload capabilities

When the virtio PMD is used on top of a vhost that does not support
offloads, Rx offload capabilities are still advertised by
virtio_dev_info_get(). But if an application tries to start the PMD with
Rx offloads enabled (rxmode.hw_ip_checksum = 1), the initialization of
the device will fail with -ENOTSUP and the following log:

  rx ip checksum not available on this host

This patch fixes the Rx offload capabilities returned by
virtio_dev_info_get() to be consistent with features advertised by the
host.

Fixes: 96cb6711939e ("net/virtio: support Rx checksum offload")
Fixes: 86d59b21468a ("net/virtio: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>

examples/performance-thread: add packet type parsing

Last changes in Niantic and Fortville NIC drivers causes that
vector Rx path is chosen by default in l3fwd-thread application.
This path doesn't support propagation of hw packet type recognition
to the packet_type field in mbuf, and packets cannot be classified
properly.

The approach to solve this problem is similar to the commit:
71a7e2424e07 ("examples/l3fwd: fix using packet type blindly").

To use sw packet analyzer, new command line option "--parse-ptype" is
introduced.

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>

examples/ip_pipeline: fix parsing of pass-through pipeline

This patch fixes the configuration file parsing error when load balancing
function is enabled in pass-through pipeline.

error log:
pipeline> [APP] Initializing PIPELINE1 ...
[PIPELINE1] Pass-through
Parse error in section "PIPELINE1": entry "lb" has invalid value ("hash")

Fixes: cbe82f6cfb0a ("examples/ip_pipeline: add swap action in pass-through")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>